Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SPST; Temperature Grade: INDUSTRIAL; No. of Terminals: 14; Package Code: TSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
Median Price
$0.251
Lifecycle Status
Suppliers In-Stock
11
In-Stock Inventory
1k+
Rochester
1+ parts
-
100+ parts
1k+ parts
$0.208
10k+ parts
$0.186
DigiKey
$0.310
Verical
$0.232
DF Sales Co.
$0.021
Digiode
$0.196
Vyrian
$0.206
Chip Stock
Anansix
R&J Components
Semi Source
Corphita
$0.185
Metaverse IC Inc.
QUARKTWIN TECHNOLOGY LTD
RC Electronics
$0.250
$0.240
$0.230
Microchip USA
Supply Digital
Glotronic Ltd.
Multiplexers & Switches MM74HC4066MTC attributes and parameters. Explore more Multiplexers & Switches devices from National Semiconductor
Other IC type:
JESD-30 Code:
Length:
No. of Channels:
No. of Functions:
No. of Terminals:
Nominal Off-state Isolation:
Nominal On-state Resistance Match:
Maximum On-state Resistance (Ron):
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Code:
Package Shape:
Package Style (Meter):
Qualification:
Maximum Seated Height:
Maximum Supply Current (Isup):
Nominal Supply Voltage (Vsup):
Surface Mount:
Maximum Switch-off Time:
Maximum Switch-on Time:
Technology:
Temperature Grade:
Terminal Form:
Terminal Pitch:
Terminal Position:
Width (mm):
MM74HC4066MTC Other Function Semiconductors trade compliance attributes, and parameters.
HTS
8542.39.00.01
SB
8542.39.00.00
National Semiconductor was an American semiconductor manufacturer which specialized in analog devices and subsystems, formerly with headquarters in Santa Clara, California. The company produced power management integrated circuits, display drivers, audio and operational amplifiers, communication interface products and data conversion solutions. National's key markets included wireless handsets, displays and a variety of broad electronics markets, including medical, automotive, industrial and test and measurement applications.On September 23, 2011, the company formally became part of Texas Instruments as the "Silicon Valley" division.
INA826AIDGKR
Texas Instruments
INA826AIDGKR by Texas Instruments is an instrumentation amplifier with 150uV max input offset voltage, 0.095uA max average bias current, and 1MHz nominal bandwidth. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and high common mode rejection ratio of 120dB.
C0603C104K5RACTU
KEMET Corporation
KEMET C0603C104K5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V URdc. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.
LP2950CDT-3.3G
Onsemi
LP2950CDT-3.3G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.1A. It has a small outline package style, operates at temperatures ranging from -40 to 125 °C, and is suitable for applications requiring low dropout voltage and precise voltage regulation in electronic circuits.
RC0402JR-070RL
Yageo
Yageo's RC0402JR-070RL is a SMT fixed resistor with 0 ohm resistance, rated for temperatures from -55 to 155 °C. It features METAL GLAZE/THICK FILM tech, WRAPAROUND terminals, and 0.0625 W power dissipation. Ideal for jumper applications in electronics requiring compact surface mount components.
87832-1420
Molex
87832-1420 by Molex is a 14-contact board connector with 0.079" pitch, suitable for commercial applications. It features matte tin over nickel finish, glass-filled polyamide insulator, and polarization key for easy assembly. Withstanding voltage of 1400VAC and operating temperature range from -55 to 105°C make it reliable for various electronic devices.
MMBT3906LT1G
MMBT3906LT1G by Onsemi is a PNP BJT with VCEsat of 0.4V, hFE of 30, and fT of 250MHz. Ideal for small signal applications in electronics due to its low power dissipation, high transition frequency, and compact SOT-23 package. Suitable for use in temperature-sensitive environments with an operating range from -65°C to 150°C.
PIC18F4550-I/ML
Microchip Technology
The Microchip Technology PIC18F4550-I/ML is an 8-bit microcontroller with a max clock frequency of 48 MHz. It features 13-Ch 10-Bit ADC channels and USB connectivity, making it ideal for industrial applications requiring high-speed data processing and analog-to-digital conversion. With low power mode and flash ROM programmability, this chip offers efficient performance in compact designs.
BAV99
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM7805CT
National Semiconductor
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
LL4148
Panjit International
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
2N2222A
Tt Electronics Plc
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .8 A; JESD-30 Code: O-MBCY-W3;
LM555CMX
LM555CMX by Texas Instruments is an Analog Waveform Generation IC with 8 terminals. It operates at a nominal voltage of 5V and supports power supplies ranging from 5V to 15V. This versatile IC, housed in a small outline package, is commonly used for pulse and rectangular waveform generation in commercial temperature environments.
MMBT2907ALT1G
MMBT2907ALT1G by Onsemi is a PNP BJT transistor with 100 min hFE, 60V VCEO, and 200MHz fT. Ideal for switching applications, it has a small outline package with Gull Wing terminals and can handle up to 0.6A of collector current.
CL31B104KBCNNNC
Samsung Electro-mechanics
Samsung Electro-mechanics CL31B104KBCNNNC is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It features X7R temperature characteristics, -55 to 125 °C operating range, and compact SMT package style. Ideal for applications requiring high reliability in compact electronic devices.
Motorola
RECTIFIER DIODE; Surface Mount: YES; Maximum Output Current: .1 A; Maximum Reverse Recovery Time: .006 us; Maximum Repetitive Peak Reverse Voltage: 70 V; JESD-609 Code: e0;
SMBJ18CA
World Products
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WS
Tak Cheong Electronics Holdings
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
261
Deltrol Controls
Other Relays;
Diodes Incorporated
Electronic Transistors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
TS5A23166DCUR
TS5A23166DCUR by Texas Instruments is a dual-function SPST switch with 2 channels, operating at -40 to 85°C. It features a max on-state resistance of 4 ohm, switching time of 20 ns, and nominal bandwidth of 150 kHz. Ideal for industrial applications requiring low power consumption and high isolation levels.
DG419DJ-E3
Vishay Intertechnology
Vishay Intertechnology's DG419DJ-E3 is an 8-terminal SPDT CMOS switch with a max on-state resistance of 35 ohm. Operating b/w -40 to 85 °C, it has a peak reflow temperature of 260C and switching voltage of +/-15 V. Ideal for industrial applications requiring fast response times and precise signal routing.
ADG333ABRSZ-REEL
Analog Devices
ADG333ABRSZ-REEL by Analog Devices is a SPDT multiplexer with 4 functions, operating at -40 to 85°C. It has a max on-state resistance of 45 ohm and offers separate outputs. Ideal for industrial applications requiring precise signal switching in compact designs.
TS5A23159DGSTG4
TS5A23159DGSTG4 by Texas Instruments is a SPDT switch with 2 functions, operating at -40 to 85°C. It has a low on-state resistance of 3.5 ohm and provides separate outputs. Ideal for industrial applications requiring high isolation and fast switching times.
MAX4545EAP+
Analog Devices' MAX4545EAP+ is a 4-function audio/video switch with 20 terminals, operating at -40 to 85°C. It features a max on-state resistance of 20Ω, switching time of 150ns, and off-state isolation of 80dB. Ideal for industrial applications requiring high-speed signal routing in compact designs.
TS3A44159RGTR
TS3A44159RGTR by Texas Instruments is a CMOS SPDT switch with 2 functions, 4 channels, and 0.8 ohm max on-state resistance. Operating at -40 to 85 °C, it has a nominal bandwidth of 35 kHz. Ideal for industrial applications requiring high isolation and low on-state resistance.
MAX4784ETE+T
Analog Devices' MAX4784ETE+T is a CMOS multiplexer with 2 channels, 4 functions, and on-state resistance of 3 ohm. It operates at temperatures from -40 to 85 °C and has a supply voltage range of 1.6V to 3.6V. Ideal for industrial applications requiring fast switching times and low power consumption.
SN74LV4052APWRG4
SN74LV4052APWRG4 by Texas Instruments is a CMOS differential multiplexer with 2 channels. It operates at a supply voltage range of 2-5.5V and offers a bandwidth of 50kHz. With a compact design, it is ideal for industrial applications requiring fast switching times and high isolation levels.
DG408DY
Vishay Intertechnology's DG408DY is a CMOS multiplexer with 8 channels, 100 ohm max on-state resistance, and 150 ns switch-on/off time. Ideal for industrial applications requiring a small outline package, it operates b/w -40 to 85 °C with a supply voltage range of +/-5V to +/-15V.
TS5A23159DGSRE4
TS5A23159DGSRE4 by Texas Instruments is a 2-function SPDT switch with 1.8/5V power supplies, 2.5 ohm max on-state resistance, and 64dB nominal off-state isolation. Ideal for industrial applications, it operates b/w -40 to 85°C with a compact design of 3x3mm and 0.5mm terminal pitch for space-constrained PCBs.
CD4052BE
Intersil
DIFFERENTIAL MULTIPLEXER; Temperature Grade: INDUSTRIAL; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
DG442DY
Renesas Electronics
SPST; Temperature Grade: INDUSTRIAL; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
ADG1408YRUZ
ADG1408YRUZ by Analog Devices is an 8-channel CMOS multiplexer with a max on-state resistance of 9 ohm. It operates at temperatures ranging from -40 to 125 °C and has a peak reflow temperature of 260 C. Ideal for automotive applications due to its small outline, thin profile package style and break-before-make switching technology.
MUX36S16IPWR
MUX36S16IPWR by Texas Instruments is a CMOS single-ended multiplexer with 28 terminals, operating at -40 to 125 °C. It has a max on-state resistance of 430 ohm and nominal bandwidth of 500 kHz. Ideal for automotive applications due to its small outline package and low supply voltage requirements.
CD74HCT4067M
Thomson Consumer Electronics
SINGLE-ENDED MULTIPLEXER; Temperature Grade: MILITARY; No. of Terminals: 24; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
CD4053BM96G3
CD4053BM96G3 by Texas Instruments is a CMOS multiplexer with 3 functions, operating at -55 to 125 °C. It has a max on-state resistance of 1050 ohm and nominal bandwidth of 30 kHz. Ideal for military-grade applications requiring separate outputs and low supply current.
DG413DYZ-T
MPC508AU
The Texas Instruments MPC508AU is a CMOS single-ended multiplexer with 8 channels, operating at temperatures ranging from -40 to 85°C. It features a max on-state resistance of 1500 ohm and common output voltage. Ideal for industrial applications requiring a compact rectangular package with surface mount capabilities.
Harris Semiconductor
ADG1413YCPZ-REEL7
ADG1413YCPZ-REEL7 by Analog Devices is a 4-function multiplexer & switch with a square package shape. It operates at a nominal voltage of 5V and has a max operating temperature of 125°C. This IC is suitable for automotive applications due to its temperature grade and moisture sensitivity level.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved