Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
D FLIP-FLOP; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 20; Package Code: SOP; Package Shape: RECTANGULAR;
Median Price
$0.610
Lifecycle Status
Suppliers In-Stock
54
In-Stock Inventory
1k+
Chip1Stop
1+ parts
$0.275
100+ parts
$0.238
1k+ parts
-
10k+ parts
Adafruit Industries
$0.431
Bürklin Elektronik
$0.460
Arrow
$0.649
$0.455
$0.396
$0.345
Mouser Electronics
$0.850
$0.541
$0.461
Newark
$0.853
$0.530
$0.433
$0.392
Farnell
$1.300
$0.605
$0.408
$0.302
Element14
$1.360
$0.687
$0.660
$0.633
Rochester
$0.490
$0.406
$0.362
Verical
$0.508
$0.453
Flip Electronics (Authorized)
DigiKey
Avnet
Freelance Electronics
$0.125
$0.131
$0.124
Digiode
$0.226
DF Sales Co.
$0.400
Nova Conductors
$0.423
TME
$0.486
$0.339
American Microsemiconductor Inc.
$18.980
DigiKey Marketplace
Flip Electronics
Chip Stock
ComSIT Distribution GmbH
NAC Semi
$0.595
$0.535
Vyrian
Standard Data Resources
Anansix
Bristol Electronics
Microfarads
Atlantic Semiconductor
Speed Components Ltd
Prism Electronics
Resion
Cyclops Electronics Ltd
Electronic Expediters
R&J Components
Inventory MP
Inland Empire Components Inc.
Elcom Components
North Shore Components
Sogenti Electronics
Lantek
Semi Source
LWI Electronics Inc
MISTER SPROCKETS
Lonics
ACDS - Activité Composants Distribution Service
Holdelec - ElecDif-Pro
Ashlea Components Ltd
Mil-Aero Solutions, Inc.
Semtec, LLC
A2Z Electronics, Inc.
Specialty Parts & Electronic Components, Inc. (S.P.E.C.)
Corohmni
Corphita
$0.214
Ampacity Inc.
$0.234
Semicontronic
$0.228
$0.227
Component Stockers USA
$0.360
$0.340
$0.300
Aranea Global
$0.414
$0.398
Argo Parts USA
$0.410
Advanced Electronics
Continental Prestige Electronics
$0.487
$0.374
$0.292
$0.289
Microchip USA
$5.785
Modulus Dynamics
$17.995
Aztec Data Supply Inc.
$30.732
SupplyDigital Components
Kulean Microsystems
Problanco Electronics
Perfect Parts
QUARKTWIN TECHNOLOGY LTD
TANS Electronics
Supply Digital
Infinite Electronics LLP (Excess)
Metaverse IC Inc.
UHIMA Technologies
Assy Fe
iodParts Technologies Inc.
Authorized Procurement Solutions
GreenTree Electronics
Cyclops Electronics Ltd (Excess)
Latches & Flip-Flops MM74HC273WM attributes and parameters. Explore more Latches & Flip-Flops devices from National Semiconductor
Family:
JESD-30 Code:
JESD-609 Code:
Length:
Load Capacitance (CL):
Logic IC Type:
No. of Bits:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Output Polarity:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Power Supplies (V):
Propagation Delay (tpd):
Qualification:
Maximum Seated Height:
Sub-Category:
Maximum Supply Voltage (Vsup):
Minimum Supply Voltage (Vsup):
Nominal Supply Voltage / Vsup (V):
Surface Mount:
Technology:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Trigger Type:
Width:
Minimum fmax:
MM74HC273WM Logic ICs trade compliance attributes, and parameters.
HTS
8542.39.00.01
SB
8542.39.00.00
NSN
5962-01-415-3694, 5962014153694
NIIN
014153694
National Semiconductor was an American semiconductor manufacturer which specialized in analog devices and subsystems, formerly with headquarters in Santa Clara, California. The company produced power management integrated circuits, display drivers, audio and operational amplifiers, communication interface products and data conversion solutions. National's key markets included wireless handsets, displays and a variety of broad electronics markets, including medical, automotive, industrial and test and measurement applications.On September 23, 2011, the company formally became part of Texas Instruments as the "Silicon Valley" division.
OPA2277UA
Texas Instruments
OPA2277UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 100 uV and micropower consumption of 1.65 mA. Ideal for industrial applications, it offers high common mode rejection ratio of 140 dB and unity gain bandwidth of 1000 kHz in a small outline package.
LL4148-GS08
Telefunken Microelectronics
RECTIFIER DIODE; Surface Mount: YES; JESD-609 Code: e0; No. of Elements: 1; Maximum Operating Temperature: 175 Cel; Maximum Non Repetitive Peak Forward Current: 2 A;
2N2222A
Bytesonic Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .6 A; No. of Elements: 1;
87832-1420
Molex
87832-1420 by Molex is a 14-contact board connector with 0.079" pitch, suitable for commercial applications. It features matte tin over nickel finish, glass-filled polyamide insulator, and polarization key for easy assembly. Withstanding voltage of 1400VAC and operating temperature range from -55 to 105°C make it reliable for various electronic devices.
LM358AN
Signetics
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
CRG0805F10R
Tyco Electronics Components
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %;
06035C103KAT2A
KYOCERA AVX
06035C103KAT2A by KYOCERA AVX is a SMT ceramic capacitor with 0.01uF capacitance and 50V URdc. It has X7R temperature characteristics, -55 to 125 °C operating range, and 10% tolerance. Ideal for applications requiring compact surface mount capacitors with stable performance in a wide temperature range.
BSS138
Onsemi
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Shape: RECTANGULAR; Terminal Finish: Matte Tin (Sn) - annealed;
M39029/56-351
TE Connectivity
TE Connectivity's M39029/56-351 is a CRIMP contact type backshell accessory with rated voltage of 115V. It operates b/w -65 to 175 °C, suitable for MIL-C-39029/56 connectors with wire gauge ranging from 28 to 22 AWG. Ideal for military applications requiring female contacts and copper alloy material.
2N7002
Silicon Standard
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): .225 W; Maximum Drain-Source On Resistance: 7.5 ohm; Transistor Element Material: SILICON;
Semiconductor Technology
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
SS14
General Instrument
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
Infinex
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
General Semiconductor
LM317TG
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Minimum Input-Output Voltage Differential: 3 V; Qualification Status: Not Qualified; No. of Functions: 1;
LM317T
Comset Semiconductors
Other Regulators; No. of Terminals: 3; Terminal Pitch: 2.54 mm; Minimum Output Voltage-1: 1.2 V; Technology: BIPOLAR; Operating Temperature (TJ-Max): 125 Cel;
ULN2803A
Allegro MicroSystems
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Maximum Operating Temperature: 85 Cel; Terminal Form: THROUGH-HOLE;
MBRS360T3G
MBRS360T3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.63V and a max output current of 3A. It is designed for applications requiring high-speed switching and low power loss, making it suitable for use in various electronic devices.
LM358D-T
Philips Semiconductors
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
DS18B20Z+
Maxim Integrated
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Body Width: 3.9 inch; Maximum Supply Voltage: 5.5 V;
MC74AC377DWG
MC74AC377DWG by Onsemi is an 8-bit latch with a supply voltage of 3.3/5V, operating at a max frequency of 75MHz. It has a propagation delay of 14.5ns and operates in industrial temperature range (-40 to 85°C). Ideal for applications requiring positive edge triggering and true output polarity in small outline packages.
SN74LVC2G74MDCUTEP
SN74LVC2G74MDCUTEP by Texas Instruments is a CMOS latch with 8 terminals, operating at 3.3V. It has a propagation delay of 7.9 ns and can handle a max frequency of 175 MHz. Ideal for applications requiring fast data storage and retrieval in compact electronic devices due to its small outline package and low power consumption.
CD4013BPWRE4
CD4013BPWRE4 by Texas Instruments is a CMOS latches & flip-flops IC with 2 functions, 300 ns propagation delay at 5V. It operates b/w -55 to 125°C, suitable for military applications. With a small outline package and surface mount capability, it offers high-speed performance up to 3.5 MHz.
CD74AC112M
Rca Solid State
J-K FLIP-FLOP; Temperature Grade: MILITARY; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR;
74VHC175M
National Semiconductor
D FLIP-FLOP; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR;
74AUP1G80GS,132
NXP Semiconductors
NXP Semiconductors' 74AUP1G80GS,132 is a CMOS latch with 6 terminals and a supply voltage range of 1.2-3.3V. It has a propagation delay of 27.2ns, operates in automotive temperatures (-40 to 125°C), and supports a max frequency of 510MHz. Ideal for applications requiring positive edge triggers in compact designs with low power consumption.
NC7SZ74K8X-L22236
The Onsemi NC7SZ74K8X-L22236 is a CMOS latch with 13ns propagation delay, suitable for applications requiring fast response times. It operates at supply voltages from 1.65V to 5.5V and has a max frequency of 250MHz, making it ideal for high-speed digital circuits. With a small outline package and low power consumption of 50mA, it is well-suited for compact and energy-efficient designs in various electronic devices.
74LVC1G74GN,115
NXP Semiconductors' 74LVC1G74GN,115 is a latch with 5.9ns propagation delay and 1.8V nominal voltage. It has 8 terminals, operates b/w -40 to 125 °C, and supports up to 175MHz frequency. Ideal for automotive applications due to its small outline package and positive edge trigger type.
MC74AC74DG
Rochester Electronics
D FLIP-FLOP; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 14; Package Code: SOP; Package Shape: RECTANGULAR;
SN74F175D
SN74F175D by Texas Instruments is a TTL technology latch with 4 functions, 9.5 ns propagation delay at 5V supply, and 50 pF load capacitance. It is used in applications requiring positive edge triggering, such as digital circuits for data storage and transfer. The small outline package with gull wing terminals makes it suitable for surface mount assembly in commercial-grade temperature environments.
CD4044BE
R-S LATCH; Temperature Grade: INDUSTRIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR;
74AUP1G74DC-Q100,125
NXP Semiconductors' 74AUP1G74DC-Q100,125 is a CMOS latch with 23.3ns propagation delay and 510MHz fmax. It operates b/w -40 to 125 °C, suitable for automotive applications due to AEC-Q100 screening level. The latch has a supply voltage range of 0.8V to 3.6V and comes in a small outline package with gull wing terminals.
SN74LS76AN
Motorola
J-K FLIP-FLOP; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR;
CD74HC73M
J-K FLIP-FLOP; Temperature Grade: MILITARY; Terminal Form: GULL WING; No. of Terminals: 14; Package Code: SOP; Package Shape: RECTANGULAR;
SN74HCS74QDRQ1
SN74HCS74QDRQ1 by Texas Instruments is a CMOS latches & flip-flops IC with 2 functions, operating at 5V. It features a propagation delay of 42ns, Schmitt trigger, and AEC-Q100 screening level. Ideal for automotive applications due to its high temperature grade and small outline package style.
SN74LVC1G80DCKT
SN74LVC1G80DCKT by Texas Instruments is a latch with 12.5 ns propagation delay, 32 Amp max I (ol), and 9.9 ns propagation delay. It is used in automotive applications due to its small size, low power consumption (0.01 mA ICC), and wide operating temperature range (-40 to 125 °C).
MC100EP131FAR2G
MC100EP131FAR2G by Onsemi is a 4-bit latch with 0.6 ns propagation delay, operating b/w -40 to 85 °C. It has a supply voltage of 3.3V and supports positive edge trigger type. Ideal for industrial applications requiring fast data processing in compact spaces due to its low profile flatpack design and complementary output polarity.
74LVC1G74DP-Q100H
NXP Semiconductors' 74LVC1G74DP-Q100H is a CMOS latch with 5.9 ns propagation delay, suitable for automotive applications. It operates at 1.8V nominal voltage and has a max frequency of 175MHz, making it ideal for high-speed triggering in automotive electronics. The small outline package with thin profile and shrink pitch design offers space-saving benefits for compact circuit layouts.
SY10EP51VKG
Micrel
D FLIP-FLOP; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: TSSOP; Package Shape: SQUARE;
SN74AHC273DWR
SN74AHC273DWR by Texas Instruments is a CMOS latch with 8 bits and a propagation delay of 12.5 ns. It is commonly used in automotive applications due to its small outline package and temperature grade.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
MM74HC74AMTCX
Fairchild Semiconductor
D FLIP-FLOP; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 14; Package Code: TSSOP; Package Shape: RECTANGULAR;
MM74HC74AN
MM74HC74AN by Onsemi is a dual-function latch with 140 ns propagation delay. It operates b/w -40 to 85 °C and supports supply voltage from 2V to 6V. Ideal for industrial applications requiring positive edge triggering in CMOS technology.
D FLIP-FLOP; Temperature Grade: INDUSTRIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 14; Package Code: DIP; Package Shape: RECTANGULAR;
MM74HC74AMX
MM74HC74AM
MM74HC273WM
MM74HC273WM by Onsemi is an 8-bit latch with a propagation delay of 34ns. It operates at a supply voltage range of 2-6V and has a max frequency of 24MHz. Ideal for industrial applications requiring positive edge triggering, this CMOS technology flip-flop is surface mountable in a small outline package.
MM74HC273WMX
MM74C76N
J-K FLIP-FLOP; Temperature Grade: INDUSTRIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR;
J-K FLIP-FLOP; Temperature Grade: MILITARY; Terminal Form: THROUGH-HOLE; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR;
MM74HC273SJ
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved