Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
FIXED POSITIVE MULTIPLE OUTPUT LDO REGULATOR; No. of Terminals: 10; Package Code: HVSON; Terminal Form: NO LEAD; Maximum Input Voltage Absolute: 6.5 V; Maximum Voltage Tolerance: 4 %;
Median Price
-
Lifecycle Status
Suppliers In-Stock
4
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Digiode
Anansix
Euro-Tech
Parana Technologies
$3.620
$4.133
DigiPath Technology Company
$3.986
$3.667
ChromeModa Solutions
$4.067
$3.335
IDEA Electronic Components Group
$3.660
One Stop Electronics
$12.500
AZTECH Wire
$13.247
Corphita
Microchip USA
Fixed Regulators - Positive Multiple Output LDO LP5996SD-0833 attributes and parameters. Explore more Fixed Regulators - Positive Multiple Output LDO devices from National Semiconductor
Adjustability:
Maximum Dropout Voltage-1:
Nominal Dropout Voltage-1:
Maximum Dropout Voltage-2:
Maximum Input Voltage Absolute:
Maximum Input Voltage:
Minimum Input Voltage:
JESD-30 Code:
JESD-609 Code:
Length:
Maximum Line Regulation:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Outputs:
No. of Terminals:
Operating Temperature (TJ-Max):
Operating Temperature (TJ-Min):
Maximum Output Current-1:
Maximum Output Current-2:
Maximum Output Voltage-1:
Minimum Output Voltage-1:
Nominal Output Voltage-1:
Maximum Output Voltage-2:
Minimum Output Voltage-2:
Nominal Output Voltage-2:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Packing Method:
Peak Reflow Temperature (C):
Qualification Status:
Regulator Type:
Maximum Seated Height:
Sub-Category:
Surface Mount:
Technology:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Maximum Voltage Tolerance:
Width:
LP5996SD-0833 Regulators trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
National Semiconductor was an American semiconductor manufacturer which specialized in analog devices and subsystems, formerly with headquarters in Santa Clara, California. The company produced power management integrated circuits, display drivers, audio and operational amplifiers, communication interface products and data conversion solutions. National's key markets included wireless handsets, displays and a variety of broad electronics markets, including medical, automotive, industrial and test and measurement applications.On September 23, 2011, the company formally became part of Texas Instruments as the "Silicon Valley" division.
BSS138
NXP Semiconductors
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; No. of Terminals: 3; Maximum Drain Current (ID): .2 A; Operating Mode: ENHANCEMENT MODE;
M24308/2-1F
Bel Fuse
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1750VAC; No. of Connectors: ONE; Mixed Contacts: NO;
M39029/58-360
Fct Electronic
CONNECTOR ACCESSORY; IEC Conformity: NO; Alternate Contact Sources: MILITARY; MIL Conformity: YES; Contact Gender: MALE; MIL-Connector Accessory Name: CONTACT;
1N4148
Invensys Sensor Systems
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; Maximum Repetitive Peak Reverse Voltage: 100 V;
Tri-star Electronics International
CONNECTOR ACCESSORY; Material: COPPER ALLOY; MIL Conformity: YES; Associated Military - Specifications: MIL-C-55302/69, MIL-C-38999; MIL-Connector Accessory Name: CONTACT; Terminal Type: CRIMP;
ABS25-32.768KHZ-T
Abracon
Abracon's ABS25-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 122% stability, and 50000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency, such as IoT devices and precision timing systems in industrial settings.
CRCW040210K0FKED
Vishay Intertechnology
Vishay Intertechnology's CRCW040210K0FKED is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.063 W power dissipation. Ideal for surface mount applications in electronics due to its compact SMT package style and high operating temperature range of -55 to 155 °C.
LM555CM
Fairchild Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
2N2222A
Micro Commercial Components
Small Signal Bipolar Transistors; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JESD-609 Code: e0;
LM2675M-ADJ/NOPB
Texas Instruments
LM2675M-ADJ/NOPB by Texas Instruments is a voltage-mode switching regulator with 1A output current, 37V max output voltage, and 260kHz max switching frequency. Ideal for automotive applications due to its -40°C to 125°C operating temperature range and compact small outline package design.
1N4148WS
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
FDLL4148
National Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Vishay Intertechnology's BSS138 is a N-CHANNEL FET with SINGLE configuration and ENHANCEMENT MODE operation. It features 0.35W power dissipation, METAL-OXIDE SEMICONDUCTOR tech, and 150°C max temp. Ideal for surface mount applications in various electronic circuits requiring efficient power management.
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Operating Mode: ENHANCEMENT MODE; Qualification: Not Qualified;
LL4148
Surge Components
OHN3020U
Optek Technology
MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 3; Output Type: ANALOG CURRENT; Package Shape or Style: RECTANGULAR; Output Range: 25mA;
STM32H753IIT6
STMicroelectronics
STM32H753IIT6 by STMicroelectronics is a 32-bit microcontroller with 176 terminals, operating at up to 48 MHz. It features 20-Ch 16-Bit ADCs and 2-Ch 12-Bit DACs, suitable for industrial applications requiring high-speed data processing and connectivity via CAN, ETHERNET, USB, and more.
NC7WZ07P6X
BUFFER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 6; Package Code: TSSOP; Package Shape: RECTANGULAR;
LM358MX
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
M39029/56-351
Amphenol
CONNECTOR ACCESSORY; Minimum Operating Temperature: -65 Cel; Additional Features: STANDARD: MIL-DTL-38999; Contact Gender: FEMALE; MIL-Connector Accessory Name: CONTACT; Associated Military - Specifications: MIL-DTL-38999;
MC33762DM-2525R2G
Onsemi
MC33762DM-2525R2G by Onsemi is a BIPOLAR LDO Regulator with 2 outputs. It has a Max Dropout Voltage of 0.25 V, operating temperature up to 125 °C, and package style SMALL OUTLINE. Ideal for applications requiring fixed positive multiple output voltage regulation in compact spaces.
MAX8559EBAG2
Analog Devices
Analog Devices' MAX8559EBAG2 is a BICMOS technology-based LDO regulator with 3% voltage tolerance. It offers two outputs at 1.8V and 3V, with a max dropout voltage of 0.12V. Ideal for applications requiring fixed positive multiple output regulators in compact designs.
LP3986TL-2518
LP3986TL-2518 by Texas Instruments is a fixed positive multiple output LDO regulator with 2 outputs. It has a max dropout voltage of 0.1 V, operating temperature range from -40 to 125°C, and a package style of grid array for applications requiring precise voltage regulation in compact spaces.
L5956PD
L5956PD by STMicroelectronics is a fixed positive multiple output LDO regulator with a max dropout voltage of 1.5V and operates from -55 °C to 150°C. It delivers up to 0.5A across four outputs, ideal for powering complex circuits in compact designs. Its surface mount package ensures efficient space utilization in electronic applications.
TLV7111518DDSER
TLV7111518DDSER by Texas Instruments is a Fixed Positive Multiple Output LDO Regulator with 1.5V and 1.8V nominal output voltages, suitable for applications requiring stable voltage regulation. It features a small outline package style, dual terminal position, and operates within a wide temperature range from -40°C to 125°C. With surface mount capability and low load regulation of 0.015%, it is ideal for compact electronic devices needing reliable power management.
LP2966MM3030EP
LP2966MM3030EP by Texas Instruments is a fixed positive multiple output LDO regulator with 2 outputs. It has a max dropout voltage of 0.27 V and operates in temperatures ranging from -40 to 125°C. Ideal for applications requiring precise voltage regulation in compact spaces.
LP8900TLX-3333
Texas Instruments LP8900TLX-3333 is a fixed positive multiple output LDO regulator with 2.8V nominal output voltage, 0.164V max dropout voltage, and 0.2A max output current per channel. Ideal for applications requiring stable power supply in compact electronic devices.
CAT6221-JPTD-GT3
CAT6221-JPTD-GT3 by Onsemi is a Fixed Positive Multiple Output LDO Regulator with 2 outputs. It has a Max Dropout Voltage of 0.35 V, operating temperature range from -40 to 125 °C, and can handle up to 0.3 A output current. Ideal for applications requiring precise voltage regulation in compact spaces.
TPS70151PWP
TPS70151PWP by Texas Instruments is a Fixed Positive Multiple Output LDO Regulator with 2 outputs. It offers a Max Dropout Voltage of 0.275 V, Operating Temperature range from -40 to 125°C, and Max Output Currents of 0.5 A and 0.25 A respectively. Ideal for applications requiring stable voltage regulation in compact spaces.
LP2966IMMX-1828
LP2966IMMX-1828 by Texas Instruments is a Fixed Positive Multiple Output LDO Regulator with 2.7V min input voltage, 1.8V nominal output voltage, and 0.15A max output current per channel. It is ideal for applications requiring precise voltage regulation in compact spaces due to its small outline package style and dual terminal position.
MAX8559ETA22+T
Analog Devices' MAX8559ETA22+T is a BICMOS technology-based LDO regulator with 2 outputs. It offers a max dropout voltage of 0.12 V, operating temperature up to 150 °C, and output currents of 0.3 A per channel. Ideal for applications requiring precise voltage regulation in compact spaces like portable electronics and IoT devices.
TPS71818-33DRVT
TPS71818-33DRVT by Texas Instruments is a BICMOS technology-based LDO regulator with 3.3V and 1.8V output voltages, ideal for applications requiring a small outline package and very thin profile. It has a max dropout voltage of 0.4V, operating temperature range from -40°C to 125°C, and can handle up to 0.2A output current per channel.
NCP154MX330285TAG
NCP154MX330285TAG by Onsemi is a Fixed Positive Multiple Output LDO Regulator with 3.3V and 2.85V outputs, 0.25V dropout voltage, and 0.3A max output current per channel. Ideal for applications requiring low dropout voltage and multiple fixed output voltages in a compact package.
NCP152MX180180TCG
NCP152MX180180TCG by Onsemi is a Fixed Positive Multiple Output LDO Regulator with 1.8V nominal output voltage, 0.4V max dropout voltage, and 0.15A max output current per channel. It is ideal for applications requiring stable power supply in compact spaces, such as IoT devices and portable electronics.
TPS2147IDGQR
TPS2147IDGQR by Texas Instruments is a fixed positive multiple output LDO regulator with 2 outputs. It has a max dropout voltage of 0.35 V and operates in temperatures ranging from -40 to 100°C. Ideal for applications requiring stable power supply with minimal voltage drop, such as portable electronic devices.
NCP3335AMN330R2G
NCP3335AMN330R2G by Onsemi is a Fixed Positive Multiple Output LDO Regulator with 3.3V nominal output voltage, 0.34V max dropout voltage, and 1.5% max voltage tolerance. It is ideal for applications requiring stable power supply with dual outputs in compact designs.
LP3986TLX-2828/NOPB
LP3986TLX-2828/NOPB by Texas Instruments is a Fixed Positive Multiple Output LDO Regulator with 2 outputs. It has a max dropout voltage of 0.1 V, operating temperature range from -40 to 125°C, and a package style of Grid Array. Ideal for applications requiring precise voltage regulation in compact electronic devices.
LD3986J29R-E
LD3986J29R-E by STMicroelectronics is a fixed positive multiple output LDO regulator with a max dropout voltage of 0.1V and operates b/w -40 °C to 125°C. It features two outputs, each providing 2.9V at up to 150mA. Ideal for compact electronic applications requiring stable voltage regulation.
ADP320ACPZ-110-R7
ADP320ACPZ-110-R7 by Analog Devices is a fixed positive multiple output LDO regulator with 3.3V nominal output voltage and 0.2A max output current per channel. It operates in a temperature range from -40°C to 125°C, making it suitable for various applications requiring stable power supply with low dropout voltage. The package style includes chip carrier, heat sink/slug, and very thin profile for compact designs.
TPS71913-28DRVT
TPS71913-28DRVT by Texas Instruments is a BICMOS technology-based LDO regulator with 2 outputs. It has a max dropout voltage of 0.4 V, operating temperature range from -40 to 125 °C, and can handle up to 0.2 A output current per channel. Ideal for applications requiring precise voltage regulation in compact spaces.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved