Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
MCP1722-3312H/Q8BVAO by Microchip is a CMOS technology-based LDO regulator with 3.3V and 12V output voltages, ideal for automotive applications due to AEC-Q100 screening. It offers dual outputs, max load regulation of 0.0165%, and can handle up to 0.1A output current with a wide input voltage range from 13V to 55V.
Median Price
$1.288
Lifecycle Status
Suppliers In-Stock
4
In-Stock Inventory
1k+
Verical
1+ parts
-
100+ parts
1k+ parts
10k+ parts
TME
$1.180
$0.840
Vyrian
Nova Conductors
Ampacity Inc.
$1.090
AZTECH Wire
$6.520
$6.260
$6.140
$6.010
Montano Global Distributors
LOOK Integrated Logistics
NIA Electronics
Ledger Components
Argo Parts USA
LMD Electronica
Continental Prestige Electronics
Authorized Procurement Solutions
Microchip USA
Aranea Global
This material provides good durability and protection for the regulator, making it suitable for a variety of applications.
Low dropout voltage ensures efficient power delivery and minimal power loss.
Easy to mount on PCBs, saving space and facilitating automated assembly processes.
Stable output voltage suitable for powering various electronic components.
Wide operating temperature range enables use in extreme environmental conditions.
CMOS technology offers high efficiency and low power consumption.
Square shape allows for efficient use of space on the PCB.
Provides stable and reliable power output for multiple components in a circuit.
Fixed Regulators - Positive Multiple Output LDO MCP1722-3312H/Q8BVAO attributes and parameters. Explore more Fixed Regulators - Positive Multiple Output LDO devices from Microchip Technology
Adjustability:
Maximum Dropout Voltage-1:
Maximum Dropout Voltage-2:
Maximum Input Voltage:
Minimum Input Voltage:
JESD-30 Code:
Length:
Maximum Load Regulation:
No. of Functions:
No. of Outputs:
No. of Terminals:
Operating Temperature (TJ-Max):
Operating Temperature (TJ-Min):
Maximum Output Current-1:
Maximum Output Current-2:
Maximum Output Voltage-1:
Minimum Output Voltage-1:
Nominal Output Voltage-1:
Maximum Output Voltage-2:
Minimum Output Voltage-2:
Nominal Output Voltage-2:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Regulator Type:
Screening Level:
Maximum Seated Height:
Surface Mount:
Technology:
Terminal Form:
Terminal Pitch:
Terminal Position:
Width:
MCP1722-3312H/Q8BVAO Regulators trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
Microchip Technology Incorporated is a leading provider of integrated circuit (IC) solutions for the global market. Founded in 1989, the company designs, manufactures, tests and markets state-of-the-art microcontrollers and analog devices for use in a wide array of electronics applications, such as the automotive industry, consumer electronics and industrial automation. Through its world-class production processes and technologies, Microchip Technology has become an innovator of semiconductor solutions that enable customers to maximize their performance while streamlining costs.
President and CEO
Ganesh Moorthy
Executive Chair
Steve Sanghi
CFO, Senior VP
J. Eric Bjornholt
Fab 5 - Colorado
Fabrication
Fab Initiation
1995
USA
Colorado Springs
Wafer Capacity
70,000
Santa Clara
1990
1,290
Lawrence
1989
5,000
Fab 4 - Gresham
1988
Gresham
50,000
Fab 2 - Tempe
1994
Tempe
30,000
Beverly
1985
2,000
Lowell
1986
15,000
Garden Grove
12,000
New Fab - Gresham
2024
LM317T
Samsung
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Load Regulation (%): 1.5 %; Operating Temperature (TJ-Min): 0 Cel; Maximum Line Regulation (%/V): .07;
CRGCQ0805F10K
TE Connectivity
TE Connectivity's CRGCQ0805F10K is a 10000 ohm fixed resistor with 1% tolerance. It operates b/w -55 to 155 °C and has a power dissipation of 0.125 W. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance.
2N2222A
Microchip Technology
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Minimum Operating Temperature: -65 Cel; Terminal Position: BOTTOM;
Texas Instruments
2N2222A by Texas Instruments is a small signal NPN bipolar junction transistor (BJT) with a max collector-emitter voltage of 40V and a max collector current of 0.8A. It is commonly used for switching applications due to its fast turn on/off times (35ns/285ns) and high transition frequency (300MHz).
Gec Plessey Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
SMBJ18CA
Synsemi
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM7805CT/NOPB
LM7805CT/NOPB by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1.5A. It operates b/w 0-125°C, has a package style of flange mount, and offers low line/load regulation making it ideal for various electronic applications requiring stable power supply.
DS18B20Z/T&R
Maxim Integrated
DS18B20Z/T&R by Maxim Integrated is a 12-bit digital temperature sensor with a max supply voltage of 5.5V and an accuracy of 0.50°C. It features a 1-Wire interface, operates b/w -55°C to 125°C, and is ideal for applications requiring precise temperature monitoring in compact spaces.
BSS123,215
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Moisture Sensitivity Level (MSL): 1; No. of Terminals: 3; Maximum Time At Peak Reflow Temperature (s): 30;
KSZ9031RNXIA
KSZ9031RNXIA by Microchip is a 48-terminal Ethernet transceiver with data rate of 1000 Mbps. Operating temperature range from -40 to 85°C makes it suitable for industrial applications. This square-shaped chip carrier has a very thin profile and matte tin finish, ideal for network interfaces.
1N4148
Taiwan Semiconductor
RECTIFIER DIODE; Surface Mount: NO; Peak Reflow Temperature (C): 260; Maximum Operating Temperature: 175 Cel; JESD-609 Code: e3; No. of Elements: 1;
MC33269T-3.3G
Onsemi
MC33269T-3.3G by Onsemi is a fixed positive single output LDO regulator with a max output current of 0.8 A and a dropout voltage of 1.35 V. It is commonly used in applications that require stable voltage regulation, such as power supplies for electronic devices.
2N7002DWH6327XTSA1
Infineon Technologies
2N7002DWH6327XTSA1 by Infineon: N-CHANNEL FET with 60V DS Breakdown Voltage, 0.3A ID, and 3ohm RDS. Ideal for SWITCHING applications in small outline packages with GULL WING terminals.
Jgd Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Maximum Operating Temperature: 175 Cel; Maximum Reverse Recovery Time: .004 us; Maximum Non Repetitive Peak Forward Current: .5 A; Maximum Forward Voltage (VF): 1 V;
LM358MX
LM358MX by Texas Instruments is a dual operational amplifier with a max input offset voltage of 9000 uV. It has a nominal voltage of 5V and a min voltage gain of 15000. This op amp is commonly used in applications requiring amplification and signal conditioning.
LM107H
Linear Technology
LM107H by Linear Technology is an Operational Amplifier with a max input offset voltage of 3000uV, common mode reject ratio of 96dB, and min voltage gain of 50000. It is used in military applications due to its MILITARY temperature grade and BIPOLAR technology for precise signal processing in harsh environments.
1N4148WT
Diodes Incorporated
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
SPC TECHNOLOGY/ MULTICOMP
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Jiangsu Changjiang Electronics Technology
Nte Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 1 W; Maximum Collector Current (IC): .8 A; Terminal Form: WIRE;
LP5996SD-3333
LP5996SD-3333 by Texas Instruments is a Fixed Positive Multiple Output LDO Regulator with 3.3V and 3.176V nominal output voltages, 0.55V and 0.22V max dropout voltages, suitable for applications requiring stable voltage regulation in compact spaces.
LP3996SD-1018/NOPB
LP3996SD-1018/NOPB by Texas Instruments is a Fixed Positive Multiple Output LDO Regulator with 2 outputs. It offers a Max Dropout Voltage of 0.55V and 0.22V, making it suitable for applications requiring stable voltage regulation in compact spaces. With a small outline package style and dual terminal position, it is ideal for space-constrained designs where precise voltage control is essential.
TPS2149IDGNG4
TPS2149IDGNG4 by Texas Instruments is a Fixed Positive Multiple Output LDO Regulator with 3.3V nominal output voltage, 0.35V max dropout voltage, and 0.2A max output current per channel. It is ideal for applications requiring stable power supply with low dropout voltages in compact electronic devices.
LP2966MM3333EP
LP2966MM3333EP by Texas Instruments is a Fixed Positive Multiple Output LDO Regulator with 2 outputs. It offers a Nominal Output Voltage of 3.3V and Max Dropout Voltage of 0.27V, suitable for applications requiring stable power supply in compact electronic devices. The package style is Small Outline, Thin Profile, Shrink Pitch making it ideal for space-constrained designs.
TPS71257DRCT
TPS71257DRCT by Texas Instruments is a PMOS technology-based LDO regulator with 2 outputs. It has a max dropout voltage of 0.23 V, operating temperature range from -40 to 125 °C, and can handle up to 0.25 A output current per channel. Ideal for applications requiring fixed positive multiple output regulation in compact spaces.
MC33762DM-2828RG
MC33762DM-2828RG by Onsemi is a Fixed Positive Multiple Output LDO Regulator with 2 outputs. It has a Max Dropout Voltage of 0.25 V, operating temperature up to 125 °C, and a package style of Small Outline Thin Profile. Ideal for applications requiring stable voltage regulation in compact spaces.
TPS780270200DDCR
TPS780270200DDCR by Texas Instruments is a Fixed Positive Multiple Output LDO Regulator with 2.7V nominal output voltage, 0.15A max output current, and 1.2V min output voltage. It is ideal for applications requiring low dropout voltage and precise regulation in compact designs.
LD3986J3133R
STMicroelectronics
LD3986J3133R by STMicroelectronics is a fixed positive multiple output LDO regulator with a max dropout voltage of 0.1V and operates from -40 °C to 125 °C. It delivers dual outputs of 3.1V and 3.3V, each capable of 150mA. Ideal for compact electronic applications requiring stable voltage regulation.
LDR2533PT-R
LDR2533PT-R by STMicroelectronics is a fixed positive multiple output LDO regulator with a max dropout voltage of 0.8V and two outputs (2.5V & 3.3V). It supports surface mount applications, delivering up to 1A current. Ideal for compact electronic designs requiring stable voltage regulation.
L5958SM
STMicroelectronics' L5958SM is a Fixed Positive Multiple Output LDO Regulator with Matte Tin finish. It has MSL of 3, peak reflow temp of 245 °C, and max time at peak temp of 30s. Ideal for applications requiring multiple output voltage regulation in compact designs.
LP3986TL-3028/NOPB
LP3986TL-3028/NOPB by Texas Instruments is a Fixed Positive Multiple Output LDO Regulator with 3% max voltage tolerance. It offers two outputs at 2.8V and 3V, each with a max output current of 0.15A. Ideal for applications requiring precise voltage regulation in compact spaces.
TPS780330220DRVT
TPS780330220DRVT by Texas Instruments is a Fixed Positive Multiple Output LDO Regulator with a nominal output voltage of 3.3V and max output current of 0.15A. It operates in an extended temperature range from -40 to 125°C, making it suitable for various applications requiring stable power supply in compact designs. The regulator features a small outline package style with very thin profile, ideal for space-constrained PCB layouts.
ADP322ACPZ-155-R7
Analog Devices
Analog Devices' ADP322ACPZ-155-R7 is a Fixed Positive Multiple Output LDO Regulator with 3.3V and 1.8V outputs, offering max dropout voltage of 0.17V and operating temperature range from -40°C to 125°C. Ideal for applications requiring precise voltage regulation in compact spaces due to its small form factor and low dropout voltage characteristics.
LM9073T
LM9073T by Texas Instruments is a fixed positive multiple output LDO regulator with 2 outputs. It has a max dropout voltage of 1V and 0.8V, suitable for applications requiring stable power supply in the temperature range up to 150°C. The package style is flange mount with through-hole terminals, making it ideal for industrial electronics.
TLV7111333DDSET
TLV7111333DDSET by Texas Instruments is a Fixed Positive Multiple Output LDO Regulator with 2 outputs. It offers a Nominal Output Voltage of 3.3 V and Max Dropout Voltage of 0.2 V, suitable for applications requiring stable voltage regulation in compact electronic devices.
LP2967IBPX-2828
LP2967IBPX-2828 by Texas Instruments is a fixed positive multiple output LDO regulator with 2.8V nominal output voltage and 0.425V max dropout voltage. It has a package style of grid array, very thin profile, fine pitch, making it suitable for applications requiring precise voltage regulation in compact spaces at temperatures ranging from -40 to 125°C.
TPS71256DRCRG4
TPS71256DRCRG4 by Texas Instruments is a PMOS technology-based LDO regulator with 2 outputs. It has a max dropout voltage of 0.23 V and can handle an operating temperature range from -40 to 125°C. Ideal for applications requiring fixed positive multiple output regulation in compact spaces.
MAX8559ETA22+
MAX8559ETA22+ by Analog Devices is a BICMOS LDO regulator with 2 outputs. It offers fixed output voltages of 1.8V and 1.854V, with a max dropout voltage of 0.12V. Ideal for applications requiring precise voltage regulation in compact spaces due to its small outline package style.
ADP221ACBZ-2828-R7
Analog Devices' ADP221ACBZ-2828-R7 is a PMOS technology-based LDO regulator with 2 outputs. It offers fixed output voltages of 2.8V and has a max dropout voltage of 0.23V, making it ideal for applications requiring precise voltage regulation in compact electronic devices.
LP2967ITP-1825
LP2967ITP-1825 by Texas Instruments is a Fixed Positive Multiple Output LDO Regulator with 2 outputs. It has a Max Dropout Voltage of 0.425 V, operating temperature range from -40 to 125 °C, and package style of Grid Array. Ideal for applications requiring precise voltage regulation in compact electronic devices.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
MCP1722-3312H/Q8B
FIXED POSITIVE MULTIPLE OUTPUT LDO REGULATOR; No. of Terminals: 8; Package Code: HVSON; Terminal Form: NO LEAD; Terminal Position: DUAL; Length: 3 mm;
MCP1722-3310H/Q8B
FIXED POSITIVE MULTIPLE OUTPUT LDO REGULATOR; No. of Terminals: 8; Package Code: HVSON; Terminal Form: NO LEAD; Maximum Output Voltage-2: 3.366 V; Surface Mount: YES;
MCP1722-3310H/S7XVAO
FIXED POSITIVE MULTIPLE OUTPUT LDO REGULATOR; No. of Terminals: 8; Package Code: HSOP; Terminal Form: GULL WING; Surface Mount: YES; Minimum Input Voltage: 11 V;
MCP1722-3310H/Q8BVAO
FIXED POSITIVE MULTIPLE OUTPUT LDO REGULATOR; No. of Terminals: 8; Package Code: HVSON; Terminal Form: NO LEAD; Maximum Output Current-1: .05 A; Maximum Load Regulation: .0165 %;
MCP1722-3310H/S7X
MCP1722-3310H/S7X by Microchip Technology is a fixed positive multiple output LDO regulator with a max dropout voltage of 0.75V and operating temperature range from -40°C to 150°C. It is suitable for applications requiring a min input voltage of 11V and provides two outputs with nominal voltages of 10V and 3.3V.
MCP1722-3312H/S7X
FIXED POSITIVE MULTIPLE OUTPUT LDO REGULATOR; No. of Terminals: 8; Package Code: HSOP; Terminal Form: GULL WING; Width: 3.9 mm; Screening Level: AEC-Q100;
MCP1722-3312H/S7XVAO
FIXED POSITIVE MULTIPLE OUTPUT LDO REGULATOR; No. of Terminals: 8; Package Code: HSOP; Terminal Form: GULL WING; Maximum Dropout Voltage-1: .75 V; No. of Functions: 1;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved