Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
OTHER TERMINATOR; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
Median Price
$1.406
Lifecycle Status
Suppliers In-Stock
8
In-Stock Inventory
1k+
Chip Stock
1+ parts
-
100+ parts
1k+ parts
10k+ parts
Vyrian
Anansix
Digiode
Cyclops Electronics Ltd
Bristol Electronics
Microfarads
Prism Electronics
AZTECH Wire
$0.700
$0.670
$0.660
$0.650
Parana Technologies
$7.929
$8.490
DigiPath Technology Company
$8.731
$8.032
ChromeModa Solutions
$8.909
$7.305
IDEA Electronic Components Group
$8.464
$8.018
One Stop Electronics
$26.500
Alle Elektronik GmbH
Corphita
Kepictronics
Futuretech Components
Data Bus Terminators LP2998MA attributes and parameters. Explore more Data Bus Terminators devices from National Semiconductor
Differential Output:
Interface IC Type:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Signal Lines:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Qualification:
Maximum Seated Height:
Maximum Supply Voltage:
Minimum Supply Voltage:
Nominal Supply Voltage:
Surface Mount:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Width:
LP2998MA Interface ICs trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
National Semiconductor was an American semiconductor manufacturer which specialized in analog devices and subsystems, formerly with headquarters in Santa Clara, California. The company produced power management integrated circuits, display drivers, audio and operational amplifiers, communication interface products and data conversion solutions. National's key markets included wireless handsets, displays and a variety of broad electronics markets, including medical, automotive, industrial and test and measurement applications.On September 23, 2011, the company formally became part of Texas Instruments as the "Silicon Valley" division.
NE555DR
Texas Instruments
NE555DR by Texas Instruments is an Analog Waveform Generation IC with 8 terminals, operating voltage of 5V, and power supplies ranging from 5-15V. It is a versatile component for pulse generation applications due to its small outline package and commercial temperature grade suitability.
SMBJ18CA
Taiwan Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
NXP Semiconductors
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
PIC18F4550-I/ML
Microchip Technology
The Microchip Technology PIC18F4550-I/ML is an 8-bit microcontroller with a max clock frequency of 48 MHz. It features 13-Ch 10-Bit ADC channels and USB connectivity, making it ideal for industrial applications requiring high-speed data processing and analog-to-digital conversion. With low power mode and flash ROM programmability, this chip offers efficient performance in compact designs.
2N2222A
Vpt Components
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 1 W; Maximum Collector Current (IC): .8 A; Maximum Power Dissipation Ambient: .5 W;
BSS138
Weitron Technology
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Terminal Form: GULL WING; Terminal Position: DUAL;
FDV304P
Onsemi
The Onsemi FDV304P is a P-CHANNEL FET with 25V DS Breakdown Voltage, ideal for SWITCHING applications. It features a max Drain Current of 0.46A and an Operating Temperature range of -55 to 150 °C. The transistor comes in a PLASTIC/EPOXY package with GULL WING terminals, suitable for surface mount configurations.
RC0805FR-0710KL
Yageo
Yageo's RC0805FR-0710KL is a 10000 ohm SMT fixed resistor with 1% tolerance and 0.125 W power dissipation. Ideal for applications requiring resistance to operate b/w -55°C to 155°C, such as in automotive electronics or industrial control systems. Features metal glaze/thick film technology and matte tin finish with nickel barrier.
CRGCQ0805F10K
TE Connectivity
TE Connectivity's CRGCQ0805F10K is a 10000 ohm fixed resistor with 1% tolerance. It operates b/w -55 to 155 °C and has a power dissipation of 0.125 W. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance.
Transys Electronics
Cobham Plc
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Minimum DC Current Gain (hFE): 100; Maximum Turn Off Time (toff): 300 ns;
LM358N
Philips Semiconductors
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
C1206C104M5RACTU
KEMET Corporation
KEMET C1206C104M5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125°C operating range, and ±20% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance across temperatures.
1N4148
American Power Devices
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LAN8720AI-CP-TR
LAN8720AI-CP-TR by Microchip is an Ethernet transceiver with 100 Mbps data rate, operating at -40 to 85 °C. It features a 3.3 V supply voltage, 54 mA supply current, and TS 16949 screening level. Ideal for network interfaces in industrial applications due to its compact square package and low profile design.
SS14
SPC TECHNOLOGY/ MULTICOMP
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358AN
Fairchild Semiconductor
LM107H/883
Rochester Electronics
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Maximum Average Bias Current (IIB): .1 uA;
2N7002
Inter F E T
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 7.5 ohm; Maximum Drain Current (Abs) (ID): .115 A;
Electronic Devices
GTL2021DGG
OTHER TERMINATOR; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 56; Package Code: TSSOP; Package Shape: RECTANGULAR;
UCC5619MWPTRG4
UCC5619MWPTRG4 by Texas Instruments is a SCSI bus terminator with 27 signal lines and 110 ohm pull-up resistance. It operates b/w 0-70°C, with a supply voltage range of 4-7V. This BICMOS technology device is ideal for data bus termination applications.
UC5613QPTR
UC5613QPTR by Texas Instruments is a Data Bus Terminator with 28 terminals, operating at 5V. It features a pull-up resistance of 110 ohm and is designed for SCSI bus termination applications. With a temperature range of 0-70°C, this chip carrier package offers reliable performance in commercial-grade environments.
LP2998MAX/NOPB
LP2998MAX/NOPB by Texas Instruments is a Data Bus Terminator with 2.2-5.5V supply voltage range, -40 to 125°C operating temperature, and automotive-grade quality. It comes in a small outline package with 8 terminals, matte tin finish, and gull wing terminal form. Ideal for interface applications requiring a compact solution with high reliability in harsh environments.
UC5603J
UC5603J by Texas Instruments is a SCSI bus terminator with 16 terminals, operating at 5V. It features a ceramic package, measures 19.56mm in length, and has a max supply voltage of 5.25V. Ideal for commercial applications requiring a dual terminal position and nominal pull-up resistance of 110 ohms.
UCC5631AFQPG4
UCC5631AFQPG4 by Texas Instruments is a Data Bus Terminator with 48 terminals, operating at 3.3V nominal voltage and supporting SCSI interface. It features differential output, 105 ohm pull up resistance, and operates in commercial temperature range of 0-70°C. Ideal for applications requiring precise termination of signal lines in electronic systems.
UCC5670MWP
UCC5670MWP by Texas Instruments is a SCSI bus terminator with 36 terminals, BICMOS technology, and 3.3V nominal voltage. It features a max operating temperature of 70°C and differential output capability. Ideal for data bus termination applications requiring a compact design and high performance in commercial-grade environments.
74F1071MSA
National Semiconductor
74F1071MSA by National Semiconductor is a Data Bus Terminator with 20 terminals in a small outline package. It features Gull Wing terminal form, Tin/Lead finish, and 0.65mm pitch. Ideal for diode bus termination arrays in electronic applications.
UC5609J
UC5609J by Texas Instruments is a SCSI bus terminator with 18 signal lines. It operates b/w 0-70°C, with supply voltage range of 3.8-5.25V and pull-up resistance of 110Ω. Ideal for commercial applications requiring bipolar technology in an inline package style.
SN74ACT1071DRE4
SN74ACT1071DRE4 by Texas Instruments is a Data Bus Terminator with 14 terminals, operating at 5V. It has a temperature range of -40 to 85°C and peak reflow temperature of 260°C. This CMOS technology device is used for diode bus termination arrays in industrial applications.
UCC5622MWPTR
UCC5622MWPTR by Texas Instruments is a SCSI bus terminator with 27 signal lines and 110 ohm pull-up resistance. It operates b/w 0-70°C, with a supply voltage range of 4-7V. This small outline package is ideal for commercial applications requiring high-speed data transmission.
UCC5620MWPG4
UCC5620MWPG4 by Texas Instruments is a SCSI bus terminator with 27 signal lines and 110 ohm pull-up resistance. It operates b/w 0-70°C, with supply voltage ranging from 4-7V. This BICMOS technology device comes in a small outline package for surface mount applications.
UCC5672MWPTRG4
UCC5672MWPTRG4 by Texas Instruments is a SCSI bus terminator with 36 terminals, operating at 3.3V and supporting differential output. It features a max supply voltage of 5.25V, BICMOS technology, and operates in commercial temperature grades up to 70°C. Ideal for data bus termination applications requiring high performance in compact spaces.
UC5641PW28TR
UC5641PW28TR by Texas Instruments is a 28-terminal data bus terminator with a 3.3V supply voltage, suitable for commercial applications. It features a small outline package style, gull wing terminal form, and operates b/w 0°C to 70°C temperature range. Ideal for surface mount designs requiring bipolar technology.
UCC5630MWP
UCC5630MWP by Texas Instruments is a SCSI bus terminator with 36 terminals, operating voltage range of 2.7V to 5.25V, and BICMOS technology. It features a small outline package style, dual terminal position, and differential output for commercial temperature grade applications.
SDA24D16
Diodes Incorporated
DIODE BUS TERMINATION ARRAY; Terminal Form: THROUGH-HOLE; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR; Terminal Pitch: 2.54 mm;
UC5641PW24TR
UC5641PW24TR by Texas Instruments is a 3.3V Data Bus Terminator with 24 terminals in a small outline package. Operating b/w 0-70°C, it uses bipolar technology and has Gull Wing terminals for commercial applications requiring surface mount terminators.
USBDF01W5
STMicroelectronics
USBDF01W5 by STMicroelectronics is a Data Bus Terminator with 5V power supply, dual terminal position, and differential output. It has a small outline package style and operates b/w 0-70°C. Ideal for commercial applications requiring signal line termination in compact spaces.
DS2118MB+
Maxim Integrated
SCSI BUS TERMINATOR; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 36; Package Code: SSOP; Package Shape: RECTANGULAR;
UC5604PWP
UC5604PWP by Texas Instruments is a SCSI bus terminator with 24 terminals. It operates b/w 0-70°C, with supply voltage range of 3.8-5.25V and pull-up resistance of 110Ω. Ideal for data bus termination in commercial-grade applications due to its compact size and dual terminal position.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved