Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
AUDIO AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: BALL; No. of Terminals: 25; Package Code: FBGA; Package Shape: SQUARE;
Median Price
$2.200
Lifecycle Status
Suppliers In-Stock
6
In-Stock Inventory
1k+
Texas Instruments
1+ parts
100+ parts
$1.817
1k+ parts
$0.982
10k+ parts
-
Nova Conductors
$1.033
Digiode
$2.090
Vyrian
Anansix
Chip Stock
Argo Parts USA
Netroflash
$0.981
$0.961
Continental Prestige Electronics
$1.012
Parana Technologies
$1.056
$1.914
DigiPath Technology Company
$1.162
ChromeModa Solutions
$1.186
$0.973
IDEA Electronic Components Group
$1.067
Ampacity Inc.
$1.870
Corphita
$1.980
Audio & Video Amplifiers LMV1091TMX/NOPB attributes and parameters. Explore more Audio & Video Amplifiers devices from National Semiconductor
General IC Type:
JESD-30 Code:
JESD-609 Code:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Power Supplies (V):
Qualification:
Sub-Category:
Maximum Supply Current:
Surface Mount:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
LMV1091TMX/NOPB General Purpose ICs trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.33.00.01
SB
8542.33.00.00
National Semiconductor was an American semiconductor manufacturer which specialized in analog devices and subsystems, formerly with headquarters in Santa Clara, California. The company produced power management integrated circuits, display drivers, audio and operational amplifiers, communication interface products and data conversion solutions. National's key markets included wireless handsets, displays and a variety of broad electronics markets, including medical, automotive, industrial and test and measurement applications.On September 23, 2011, the company formally became part of Texas Instruments as the "Silicon Valley" division.
LL4148
Panjit International
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Bkc Semiconductors
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
LM107H/883
Advanced Micro Devices
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Low-Offset: NO;
1552200168
Molex
WIRE AND CABLE;
1N4148WT
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
DS18B20+
Maxim Integrated
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 3; Package Shape or Style: RECTANGULAR; Maximum Operating Current: 1.5 mA; Package Equivalence Code: SIP3,.1,50;
1N4148WS
C0603X104K5RACAUTO
KEMET Corporation
C0603X104K5RACAUTO by KEMET Corp is a ceramic capacitor with capacitance of 0.1 uF and rated DC voltage of 50 V. It has a temperature coefficient of 15% and can operate b/w -55 to 125 °C. This SMT package is commonly used in automotive applications due to its AEC-Q200 reference standard.
0460-202-16141
TE Connectivity
TE Connectivity's 0460-202-16141 contact features a crimp terminal type, machined contact design, and rated AC voltage of 1500V. With a wire gauge range of 20-16 AWG, it is ideal for applications requiring a male round pin-socket contact style in assembly products.
Vishay Semiconductors
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Meritek Electronics
LM317T
Integrated Power Semiconductors
Other Regulators; No. of Terminals: 3; Operating Temperature (TJ-Min): 0 Cel; Terminal Pitch: 2.54 mm; Maximum Load Regulation (%): 1.5 %; Nominal Dropout Voltage-1: 3 V;
1N4148
Invensys Sensor Systems
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; Maximum Repetitive Peak Reverse Voltage: 100 V;
Synsemi
SS495ASP
Micro Switch
The Micro Switch SS495ASP is an analog circuit IC with a supply voltage range of 4.5V to 10.5V, suitable for automotive applications. Its package body material is plastic/epoxy, and it has a rectangular shape with three terminals. Operating temperature ranges from -40°C to 125°C, making it ideal for various automotive sensor and control systems.
BAV99
Diotec Semiconductor Ag
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
Comset Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
RC0603FR-071KL
Yageo
Yageo's RC0603FR-071KL is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in electronics, it operates b/w -55 to 155 °C with a temperature coefficient of 100 ppm/°C.
STM32F405RGT6TR
STMicroelectronics
STM32F405RGT6TR by STMicroelectronics is a 32-bit microcontroller with 64 terminals, operating at a max frequency of 26 MHz. It features DAC and ADC channels, along with DMA support. Ideal for industrial applications requiring low power consumption and high-speed processing capabilities.
TPA751DG4
TPA751DG4 by Texas Instruments is an audio amplifier IC with 0.5% harmonic distortion, 3/5V power supplies, and 0.35W nominal output power. It is a CMOS technology device in a small outline package for industrial applications requiring high-quality audio amplification in compact spaces.
FHP3230IMU8X
Rochester Electronics
VIDEO AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SSOP; Package Shape: SQUARE;
SSM2211SZ
Analog Devices
Analog Devices' SSM2211SZ is a Class D audio amplifier with 0.2% harmonic distortion, ideal for industrial applications. Operating b/w -40 to 85°C, it offers 1.5W output power at 2.7-5V supplies in a small outline package with surface mount capability.
TDA8932BT/N2
NXP Semiconductors
NXP Semiconductors' TDA8932BT/N2 is a 22V audio amplifier IC with 32 terminals. It features dual functions, operates in industrial temperature range (-40 to 85°C), and draws max 50mA supply current. Ideal for audio applications requiring high-quality amplification in compact setups.
LM4991LD/NOPB
National Semiconductor
AUDIO AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 8; Package Code: HVSON; Package Shape: SQUARE;
TDA7491P13TR
TDA7491P13TR by STMicroelectronics is a Class D audio amplifier with 10W nominal output power and 32dB gain. It operates b/w 0-70°C, suitable for commercial applications. This small outline package has 36 terminals, supports a min supply voltage of 5V, and offers low harmonic distortion at 10%.
TPA6211A1DGNRG4
TPA6211A1DGNRG4 by Texas Instruments is an audio amplifier IC with 3.1W output power, 10% harmonic distortion, and 105dB noise figure. It operates b/w -40 to 85°C and requires a supply voltage of 2.5-5.5V. Ideal for industrial applications requiring high-quality audio amplification in a compact form factor.
E-TDA2003V
E-TDA2003V by STMicroelectronics is a rectangular audio amplifier with 1 function and 5 terminals. It has a nominal output power of 10W, gain of 40dB, and operates at a min supply voltage of 8V. This amplifier is commonly used in audio and video applications for its low harmonic distortion and wide nominal bandwidth of 0.022kHz.
MAX4466EXK+T
MAX4466EXK+T by Analog Devices is an audio preamplifier with 0.02% harmonic distortion. Operating b/w -40 to 85°C, it has a supply voltage range of 2.4-5.5V and bandwidth of 0.6 kHz. Ideal for audio applications requiring low distortion and wide temperature tolerance in a compact package.
LM4864MX/NOPB
AUDIO AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
PGA2505IDBR
PGA2505IDBR by Texas Instruments is an audio preamplifier with gain of 25.5 dB. It operates on +-5V power supplies, has 24 terminals in a small outline package, and withstands industrial temperature range. Ideal for audio and video amplification applications requiring precise signal processing in compact setups.
NE592D8R2G
Onsemi
NE592D8R2G by Onsemi is a video amplifier IC with 8 terminals, operating at +-6V. It has a bandwidth of 40 kHz and consumes 27mA max supply current. Ideal for audio/video applications due to its small outline package and commercial temperature grade suitability.
LM386M-1
AUDIO AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
MAX9736AETJ+T
Analog Devices' MAX9736AETJ+T is a Class D audio amplifier with 30W output power. Operating temperature range from -40 to 85°C, suitable for industrial applications. Surface mount package style, square shape, and quad terminal position make it ideal for compact audio and video systems.
TDA7293HS
TDA7293HS by STMicroelectronics is a Class AB audio amplifier with 100W output power, 10% harmonic distortion, and 30dB gain. It operates b/w 0-70°C, requires +-40V power supplies, and has a max supply current of 100mA. Ideal for audio & video applications requiring high-quality amplification in commercial temperature environments.
PAM8304ASR
Diodes Incorporated
PAM8304ASR by Diodes Inc. is an audio amplifier IC with 3W output power, 10% distortion, and 18dB gain. It operates b/w -40 to 85°C, suitable for industrial applications. With a small outline package and thin profile, it's ideal for compact audio systems.
MAX9719CEBE-T
MAX9719CEBE-T by Maxim Integrated is a 16-terminal audio amplifier with 1.4W output power, suitable for industrial applications. Operating b/w -40 to 85°C, it has a gain of 3dB and supports two channels. With a package style of grid array and very thin profile, it requires supply voltages ranging from 2.7V to 5.5V for operation.
TPA3255DDV
TPA3255DDV by Texas Instruments is a 315W audio amplifier with 4 channels. It has a gain of 21.5 dB and operates b/w 0-70°C. Ideal for audio applications requiring high power output in a compact package.
LMH6642MF
LMH6642MF by Texas Instruments is a video amplifier with 5 terminals and a small outline package. It operates b/w -40 to 85°C, with a supply voltage range of 2.7V to 12.8V. Ideal for audio/video applications requiring a bandwidth of up to 130 kHz.
MAX98357AEWL+T
Analog Devices' MAX98357AEWL+T is a Class D audio amplifier with 5V power supply, 9 terminals, and 3mA max supply current. Its industrial-grade design operates b/w -40 to 85°C, making it ideal for audio applications in various industries. The package features a grid array shape with fine pitch terminals for surface mount assembly.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
LMV1031UR-20/NOPB
CLASS AB AUDIO AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: BALL; No. of Terminals: 4; Package Code: VFBGA; Package Shape: SQUARE;
AUDIO PREAMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: BALL; No. of Terminals: 4; Package Code: FBGA; Package Shape: SQUARE;
LMV1031URX-20/NOPB
Texas Instruments LMV1031URX-20/NOPB is a Class AB audio amplifier with 2/5 V power supplies, 4 terminals, and gain of 20.1 dB. Ideal for industrial applications, it operates b/w -40 to 85°C, features a square package shape, and is surface mountable.
LMV1091TM/NOPB
CLASS AB AUDIO AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: BALL; No. of Terminals: 25; Package Code: VFBGA; Package Shape: SQUARE;
LMV1091TMX/NOPB
LMV1012UP-20/NOPB
AUDIO PREAMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: BALL; No. of Terminals: 4; Package Code: VFBGA; Package Shape: RECTANGULAR;
LMV1012TPX-15/NOPB
LMV1012UP-25/NOPB
LMV1012UP-20
LMV1012TPX-15
LMV1012UP-25
LMV1012TP-15/NOPB
LMV1012UPX-07
LMV1012TP-07/NOPB
LMV1012TP-25
LMV1012TPX-25/NOPB
LMV1012UP-07
LMV1091TMX
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved