Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Line Driver or Receivers; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 16; Package Code: QCCN; Package Shape: SQUARE;
Median Price
$7.960
Lifecycle Status
Suppliers In-Stock
20
In-Stock Inventory
1k+
Arrow
1+ parts
$7.506
100+ parts
$5.926
1k+ parts
$5.619
10k+ parts
-
Texas Instruments
$8.063
$6.573
$4.382
Chip1Stop
$9.050
$5.960
$4.820
Mouser Electronics
$12.800
$9.230
$7.800
DigiKey
$7.856
$7.737
Verical
Nova Conductors
$7.200
Digiode
$7.660
Chip Stock
Vyrian
Bristol Electronics
Component Sense
ComSIT Distribution GmbH
ACDS - Activité Composants Distribution Service
Anansix
Dark Horse Electronics
Rebound Electronics
Semtec, LLC
NexGen Digital
Elcom Components
Parana Technologies
$4.696
$5.181
DigiPath Technology Company
$5.170
$4.757
ChromeModa Solutions
$5.276
$4.326
IDEA Electronic Components Group
$4.748
Semicontronic
$5.450
$5.314
$5.286
Continental Prestige Electronics
$7.056
Corphita
$7.257
Corohmni
$14.874
S.R.D Solutions
Lixinc
Perfect Parts
Alle Elektronik GmbH
Authorized Procurement Solutions
GreenTree Electronics
Futuretech Components
Cyclops Electronics Ltd (Excess)
Robosynatics
$0.410
Lucentia Tech
Glotronic Ltd.
Argo Parts USA
Line Drivers & Receivers LMH0302SQE/NOPB attributes and parameters. Explore more Line Drivers & Receivers devices from National Semiconductor
Differential Output:
Driver No. of Bits:
JESD-30 Code:
JESD-609 Code:
Moisture Sensitivity Level (MSL):
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Minimum Out Swing:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Power Supplies (V):
Qualification:
Sub-Category:
Nominal Supply Voltage:
Surface Mount:
Technology:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
LMH0302SQE/NOPB Interface ICs trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Design/Specification - Cu Wire 21/Mar/2017
National Semiconductor was an American semiconductor manufacturer which specialized in analog devices and subsystems, formerly with headquarters in Santa Clara, California. The company produced power management integrated circuits, display drivers, audio and operational amplifiers, communication interface products and data conversion solutions. National's key markets included wireless handsets, displays and a variety of broad electronics markets, including medical, automotive, industrial and test and measurement applications.On September 23, 2011, the company formally became part of Texas Instruments as the "Silicon Valley" division.
NC7WZ07P6X
Onsemi
The Onsemi NC7WZ07P6X is a logic gate with 2 functions, featuring a propagation delay of 4.8 ns at 1.8V supply voltage. With open-drain output characteristics, it operates in industrial temperatures from -40 to 85°C. Ideal for applications requiring fast signal processing and low power consumption in compact designs.
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
LM317T
Micro Commercial Components
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Moisture Sensitivity Level (MSL): 1; Maximum Output Current-1: 1.5 A; Operating Temperature (TJ-Min): 0 Cel;
1N4148WT
Jiangsu Changjiang Electronics Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
KSZ9031RNXIA
Microchip Technology
KSZ9031RNXIA by Microchip is a 48-terminal Ethernet transceiver with data rate of 1000 Mbps. Operating temperature range from -40 to 85°C makes it suitable for industrial applications. This square-shaped chip carrier has a very thin profile and matte tin finish, ideal for network interfaces.
1N4148
Comchip Technology
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
MBR1560CT
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Surface Mount: NO; Maximum Operating Temperature: 150 Cel; Maximum Repetitive Peak Reverse Voltage: 60 V; Technology: SCHOTTKY; Maximum Non Repetitive Peak Forward Current: 150 A;
LM317T by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max input-output voltage differential of 40V. Operating temperature ranges from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. With a max output current of 1.5A, this through-hole package regulator is ideal for power supply designs where adjustable voltage levels are needed.
FDV303N
Fairchild Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Transistor Application: SWITCHING; JESD-609 Code: e3;
DS18B20Z+
Analog Devices
DS18B20Z+ by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.
BAV99LT1G
BAV99LT1G by Onsemi is a series connected diode with 2 elements in a small outline package. It has a max reverse recovery time of 0.006 us and can handle up to 100V repetitive peak reverse voltage. Ideal for rectification applications, this diode operates b/w -65°C to 150°C temperature range.
IRLML6402TRPBF
Infineon Technologies
IRLML6402TRPBF by Infineon is a P-CHANNEL FET for SWITCHING applications. It features a 20V DS Breakdown Voltage, 22A IDM, and 0.065 ohm RDS(on). With a small outline package and matte tin finish, it operates in temperatures from -55 to 150 °C.
BSS138
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Shape: RECTANGULAR; Terminal Position: DUAL;
LL4148
Micronas Semiconductor Holding Ag
RECTIFIER DIODE; Surface Mount: YES; No. of Phases: 1; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Output Current: .2 A; Maximum Forward Voltage (VF): 1.2 V;
OHN3140U
Optek Technology
MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 3; Output Type: ANALOG CURRENT; Package Shape or Style: RECTANGULAR; Output Range: 25mA;
2N2222A
General Diode
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LM555CN
Intersil
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
2N7002
Teledyne Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; JESD-30 Code: R-PDSO-G3; Maximum Operating Temperature: 150 Cel; No. of Terminals: 3;
MBR130T1G
MBR130T1G by Onsemi is a Schottky rectifier diode with max output current of 1A and max repetitive peak reverse voltage of 30V. It operates b/w -65 to 125°C, suitable for surface mount applications in electronics requiring low forward voltage drop.
MAX485ECSA-T
Maxim Integrated
MAX485ECSA-T by Maxim Integrated is a CMOS line transceiver with EIA-422 and EIA-485 interface standards. It operates on 5V, has 8 terminals, and offers differential outputs. With a max transmit delay of 60ns, it's ideal for applications requiring fast data transmission in commercial temperature environments up to 70°C.
ADM3485EARZ-REEL7
ADM3485EARZ-REEL7 by Analog Devices is a Line Driver & Receiver with 3.6V max supply voltage, 35ns max transmit delay, and 1.5mA max supply current. Ideal for EIA-422/EIA-485 interface standard applications in industrial settings due to its BICMOS technology and differential Schmitt trigger input characteristics.
SP3485CN-L
Sipex
LINE TRANSCEIVER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
SP485ECN-L/TR
Maxlinear
DS90LV047ATMTCX/NOPB
National Semiconductor
LINE DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: TSSOP; Package Shape: RECTANGULAR;
MAX3295AUT-T
MAX3295AUT-T by Analog Devices is a line driver & receiver with a max supply voltage of 3.465V and a max transmit delay of 25ns. It is commonly used in automotive applications due to its temperature grade and moisture sensitivity level.
MAX202ECSE+
LINE TRANSCEIVER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR;
SP485EEN-L
LINE TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
SP485EEN-L/TR
LTC2870IFE#PBF
LTC2870IFE#PBF by Analog Devices is a Line Driver & Receiver with 2 functions, operating at -40 to 85 °C. It has a max supply voltage of 5.5 V and offers EIA-232, EIA-422, EIA-485 interface standards. Ideal for industrial applications requiring differential output and CMOS technology in a compact package style.
MAX3221IDBR
MAX3221IDBR by Texas Instruments is a Line Driver & Receiver with 16 terminals, operating at 3.3/5V. It has a max supply voltage of 5.5V and can handle industrial temperatures from -40 to 85°C. Ideal for EIA-232-F, TIA-232-F, V.28 interfaces due to its CMOS technology and Schmitt trigger input characteristics.
LTC1480IS8#PBF
Linear Technology
MAX2769ETI+T
LINE RECEIVER; Moisture Sensitivity Level (MSL): 1; JESD-609 Code: e3; Peak Reflow Temperature (C): 260; Maximum Time At Peak Reflow Temperature (s): 30; Terminal Finish: Matte Tin (Sn) - annealed;
SP3072EEN-L
SP485EN-L
DS2480B+T&R
DS2480B+T&R by Analog Devices is a small outline line driver with 8 terminals. It operates b/w -40 to 85°C, with a supply voltage range of 4.5-5.5V. Ideal for EIA-232-C interface applications in industrial settings due to its compact size and standard input characteristics.
MAX3243EIPWR
MAX3243EIPWR by Texas Instruments is a Line Driver & Receiver with 28 terminals, operating at -40 to 85 °C. It has 3 functions, supports supply voltages of 3.3/5 V, and interfaces with EIA-232-F; TIA-232-F; V.28 standards. Ideal for industrial applications requiring high-speed data transmission in compact designs.
LT1785CN8#PBF
LT1785CN8#PBF by Analog Devices is a Line Driver & Receiver with 8 terminals, operating at 4.75-5.25V. It offers differential output, EIA-422/EIA-485 interface standards, and operates in commercial temperature range of 0-70°C. Ideal for applications requiring high-speed data transmission and noise immunity in industrial settings.
ISL3178EIBZ-T7A
Renesas Electronics
ISL3178EIBZ-T7A by Renesas Electronics is an EIA-422/EIA-485 line transceiver with a 3.3V nominal voltage and 40ns max transmit delay. It operates in industrial temperature range (-40 to 85 °C) and features differential output for reliable data transmission. Ideal for applications requiring robust communication over long distances.
ISL83483IBZ-T7A
Line Driver or Receivers; Moisture Sensitivity Level (MSL): 3; Peak Reflow Temperature (C): 250; JESD-609 Code: e3; Terminal Finish: MATTE TIN; Maximum Time At Peak Reflow Temperature (s): 30;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
LMH0387SLE/NOPB
LMH0387SLE/NOPB by Texas Instruments is a Line Transceiver with 48 terminals, operating at -40 to 85°C. It features a differential output with complementary polarity and requires a supply voltage of 3.135-3.465V. Ideal for industrial applications requiring high-speed data transmission in compact spaces due to its small form factor and low power consumption.
LINE TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 48; Package Code: VQCCN; Package Shape: SQUARE;
LMH0387SLX/NOPB
LMH0387SLX/NOPB by Texas Instruments is a Line Transceiver with 48 terminals, operating at -40 to 85 °C. It has a supply voltage range of 3.135V to 3.465V and offers differential outputs for industrial applications. The chip carrier package style with a very thin profile makes it suitable for surface mount designs, ensuring high performance in compact spaces.
LMH0302SQE/NOPB
LINE DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 16; Package Code: HVQCCN; Package Shape: SQUARE;
LMH0387SL/NOPB
LMH0387SL/NOPB by Texas Instruments is a line driver with differential output, operating at 3.135-3.465V. It features 48 terminals in a square chip carrier package, suitable for industrial applications requiring high-speed data transmission up to 260°C. With a terminal pitch of 0.5mm and nickel gold finish, it offers reliable performance in harsh environments.
LMH0302SQX/NOPB
LMH0302SQX/NOPB by Texas Instruments is a Line Driver & Receiver with 16 terminals and a supply voltage of 3.3V. It operates differentially, has a max temperature of 85°C, and uses bipolar technology. Ideal for industrial applications requiring complementary output polarity and low power consumption.
LMH0303SQE/NOPB
LMH0302SQ/NOPB
LINE DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 16; Package Code: VQCCN; Package Shape: SQUARE;
LMH0302SQ/NOPB by Texas Instruments is a Line Driver & Receiver with 16 terminals, operating at 3.3V. It offers differential outputs, complementary polarity, and operates in industrial temperature range (-40 to 85°C). Ideal for applications requiring high-speed signal transmission and precise voltage swings.
LMH0340SQE/NOPB
LMH0340SQE/NOPB by Texas Instruments is a Line Driver with 5 functions, operating at -40 to 85 °C. It has a supply voltage range of 2.375V to 3.465V and features an open-collector output polarity. Ideal for industrial applications requiring a differential input interface IC with a max supply current of 85mA.
LMH0302SQE
LMH0302SQ
LMH0307SQE/NOPB
LMH0302SQX
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved