Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
FIXED NEGATIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 3; Package Code: TO-263; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 26 V; Maximum Voltage Tolerance: 5 %;
Median Price
$2.380
Lifecycle Status
Suppliers In-Stock
22
In-Stock Inventory
1k+
Chip1Stop
1+ parts
$2.260
100+ parts
-
1k+ parts
10k+ parts
Texas Instruments
$3.345
$2.931
$1.656
DigiKey
$4.130
$2.746
$2.381
$2.254
Mouser Electronics
$2.550
$2.220
Rochester
$2.070
$1.850
$1.740
Verical
$2.313
$2.175
Arrow
$2.333
$2.086
Freelance Electronics
$1.832
$1.924
$1.814
Digiode
$2.185
Nova Conductors
$2.236
Vyrian
Anansix
Connector Distribution Corp
Right Parts Inc.
EZ Electronic Parts
Global Solutions Electronics Company
LIBRA Elektronik GmbH
Semi Source
Bristol Electronics
Atlantic Semiconductor
ACDS - Activité Composants Distribution Service
Prism Electronics
Ampacity Inc.
$1.950
Corphita
Continental Prestige Electronics
$2.191
Argo Parts USA
Bastille Electronics
$2.124
$2.018
$1.990
Component Stockers USA
$2.390
$2.250
$2.030
Parana Technologies
$6.239
$6.998
ChromeModa Solutions
$7.010
$5.748
IDEA Electronic Components Group
$6.309
Lixinc
A-Z Elektronik GmbH
Alle Elektronik GmbH
Perfect Parts
DigiPath Technology Company
$6.320
Kepictronics
Fixed Regulators - Negative Single Output LDO LM2990S-15/NOPB attributes and parameters. Explore more Fixed Regulators - Negative Single Output LDO devices from National Semiconductor
Adjustability:
Maximum Dropout Voltage-1:
Nominal Dropout Voltage-1:
Maximum Input Voltage Absolute:
Maximum Input Voltage:
Minimum Input Voltage:
JESD-30 Code:
JESD-609 Code:
Length:
Maximum Line Regulation:
Maximum Load Regulation:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Outputs:
No. of Terminals:
Operating Temperature (TJ-Max):
Operating Temperature (TJ-Min):
Maximum Output Current-1:
Maximum Output Voltage-1:
Minimum Output Voltage-1:
Nominal Output Voltage-1:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Qualification Status:
Regulator Type:
Maximum Seated Height:
Sub-Category:
Surface Mount:
Technology:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Maximum Voltage Tolerance:
Width:
LM2990S-15/NOPB Regulators trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Assembly/Origin - Mult Devices 21/Aug/2017
National Semiconductor was an American semiconductor manufacturer which specialized in analog devices and subsystems, formerly with headquarters in Santa Clara, California. The company produced power management integrated circuits, display drivers, audio and operational amplifiers, communication interface products and data conversion solutions. National's key markets included wireless handsets, displays and a variety of broad electronics markets, including medical, automotive, industrial and test and measurement applications.On September 23, 2011, the company formally became part of Texas Instruments as the "Silicon Valley" division.
BSS138
Good-ark Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
BAV99
Sprague Electric
RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): 1.3 V; Maximum Output Current: .1 A; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Operating Temperature: 175 Cel;
LM2931Z-5.0G
Onsemi
LM2931Z-5.0G by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V output voltage, 0.6V dropout voltage, and 0.1A output current. It is ideal for applications requiring stable power supply in temperature-sensitive environments due to its operating range of -40°C to 125°C.
M39029/56-351
Glenair
CONNECTOR ACCESSORY; Associated Backshell Military - Specifications: MIL-DTL-38999; Material: COPPER ALLOY; Associated Military - Specifications: MIL-DTL-38999; Contact Gender: FEMALE; DIN Conformity: NO;
Jiangsu Changjiang Electronics Technology
RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): .715 V; Maximum Operating Temperature: 150 Cel; Maximum Reverse Recovery Time: .006 us; Maximum Output Current: .2 A;
LL4148
Formosa Microsemi
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LM555CN
Intersil
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
Micro Commercial Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WS
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Itt Components
RECTIFIER DIODE; Surface Mount: YES; Maximum Reverse Recovery Time: .005 us; Config: SINGLE; Maximum Operating Temperature: 200 Cel; Maximum Non Repetitive Peak Forward Current: 1 A;
1N4148
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LIS3DHTR
STMicroelectronics
LIS3DHTR by STMicroelectronics is a 16-terminal accelerometer with output range of 0.18-1.62V, ideal for motion sensing applications. Operating temperature ranges from -40 to 85°C, making it suitable for various environments. With a compact square package body of 3x3mm and digital voltage output type, it is commonly used in surface mount designs.
2N2222A
Rectron
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Package Shape: ROUND;
1N5819HW-7-F
SPC TECHNOLOGY/ MULTICOMP
Sensitron Semiconductor
1N4148WT
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Solid State Devices
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LM358M
Raytheon Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
2N7002
Itt Semiconductor
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Package Body Material: PLASTIC/EPOXY; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Package Shape: RECTANGULAR;
LT3015IT-5#TRPBF
Analog Devices
LT3015IT-5#TRPBF by Analog Devices is a Fixed Negative Single Output LDO Regulator with 1.5A max output current, 0.68V dropout voltage, and 125 °C max operating temperature. Ideal for applications requiring stable 5V output voltage in environments ranging from -40°C to 125°C.
LT3015IMSE-3#PBF
LT3015IMSE-3#PBF by Analog Devices is a fixed negative single output LDO regulator with a max output current of 1.5A and dropout voltage of 0.5V. Operating temperature ranges from -40 to 125°C, making it suitable for various applications requiring stable 3V output voltage in compact designs.
ADP7185ACPZN0.5-R7
Analog Devices' ADP7185ACPZN0.5-R7 is a CMOS technology-based LDO regulator with a fixed negative single output at 0.5V, suitable for applications requiring precise voltage regulation in a compact form factor. Operating temperature range from -40 to 125°C makes it versatile for various environments. With surface mount capability and small outline package style, it offers ease of integration into space-constrained designs.
LT1175CQ-5#TRPBF
Linear Technology
FIXED NEGATIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: TO-263; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 20 V; Maximum Voltage Tolerance: 2.5 %;
UCC384DP-5
UCC384DP-5 by Texas Instruments is a fixed negative single output LDO regulator with a max output current of 0.5A and a nominal output voltage of 5V. It operates in temperatures ranging from -55°C to 150°C, making it suitable for various applications requiring stable voltage regulation in compact electronic devices.
LT3015EMSE-5#TRPBF
LT3015EMSE-5#TRPBF by Analog Devices is a Fixed Negative Single Output LDO Regulator with 1.5A max output current, 0.5V dropout voltage, and 2% voltage tolerance. Ideal for applications requiring a reliable 5V power source in compact designs due to its small outline package style and surface mount capability.
ADP7185ACPZN3.3-R7
Analog Devices' ADP7185ACPZN3.3-R7 is a CMOS technology-based LDO regulator with a fixed output voltage of 3.3 V. It operates in an extended temperature range from -40 to 125°C, making it suitable for various applications requiring stable power supply in compact designs. The package style features a small outline and very thin profile, ideal for space-constrained PCB layouts.
ADP7185ACPZN1.0-R7
Analog Devices' ADP7185ACPZN1.0-R7 is a CMOS technology-based fixed negative single output LDO regulator with 1V nominal output voltage. Operating temperature range from -40 to 125°C, suitable for applications requiring precise voltage regulation in compact spaces. Package style: small outline, heat sink/slug, very thin profile, ideal for surface mount designs.
LT1175IS8-5#TR
FIXED NEGATIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 20 V; Maximum Voltage Tolerance: 2.5 %;
LM2990T-15/NOPB
National Semiconductor
FIXED NEGATIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 26 V; Maximum Voltage Tolerance: 5 %;
LT3015MPQ-3#TRPBF
LT3015MPQ-3#TRPBF by Analog Devices is a fixed negative single output LDO regulator with 1.5A max output current and 2% voltage tolerance. Operating temperature ranges from -55 to 125 °C, making it suitable for various applications requiring stable 3V output voltage in compact designs.
LT3015MPMSE-2.5#TRPBF
Analog Devices' LT3015MPMSE-2.5#TRPBF is a fixed negative single output LDO regulator with a nominal output voltage of 2.5V and max output current of 1.5A. Operating temperature ranges from -55 to 125 °C, making it suitable for various applications requiring stable voltage regulation in compact spaces. The package style includes small outline, heat sink/slug, thin profile, and shrink pitch features for efficient thermal management and space-saving designs.
LT3015EDD-2.5#PBF
LT3015EDD-2.5#PBF by Analog Devices is a fixed negative single output LDO regulator with a nominal output voltage of 2.5V and max output current of 1.5A. Operating temperature ranges from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation in compact spaces like consumer electronics and industrial equipment.
LT3015IT-15#TRPBF
LT3015IT-15#TRPBF by Analog Devices is a Fixed Negative Single Output LDO Regulator with 1.5A max output current, 15V nominal output voltage, and 0.68V max dropout voltage. Ideal for applications requiring stable power supply in temperature-sensitive environments.
LT3015EQ-15#TRPBF
Analog Devices' LT3015EQ-15#TRPBF is a fixed negative single output LDO regulator with a nominal output voltage of 15V and max output current of 1.5A. Operating temperature ranges from 0 to 125 °C, making it suitable for various applications requiring stable voltage regulation in compact spaces. Its small outline package and surface mount capability enhance ease of integration into electronic designs.
UCC384DPTR-5G4
UCC384DPTR-5G4 by Texas Instruments is a fixed negative single output LDO regulator with a nominal output voltage of 5V and max output current of 0.5A. It operates in temperatures ranging from -55 to 150°C, making it suitable for various applications requiring stable voltage regulation in compact electronic devices.
LM2990SX-5.0
LM2990SX-5.0 by Texas Instruments is a fixed negative single output LDO regulator with a max output current of 1A and a nominal output voltage of 5V. It operates in temperatures ranging from -40°C to 125°C, making it suitable for various applications requiring stable voltage regulation in compact spaces. With a small outline package style and gull wing terminal form, this regulator is ideal for surface mount designs where space is limited.
LT3015IQ-3#TRPBF
LT3015IQ-3#TRPBF by Analog Devices is a fixed negative single output LDO regulator with a max output current of 1.5A and a dropout voltage of 0.68V. Operating in temperatures from -40 to 125 °C, it is ideal for applications requiring stable 3V output voltage such as industrial control systems or automotive electronics.
LT1964ES5-5#PBF
FIXED NEGATIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: VSSOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 20 V; Maximum Voltage Tolerance: 3 %;
LT3015MPQ-15#PBF
LT3015MPQ-15#PBF by Analog Devices is a fixed negative single output LDO regulator with a nominal output voltage of 15V and max output current of 1.5A. It operates in temperatures ranging from -55 to 125 °C, making it suitable for various applications requiring stable power supply such as industrial equipment and automotive electronics.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
LM2990T-5.0/NOPB
FIXED NEGATIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 3; Package Code: SFM; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 26 V; Maximum Voltage Tolerance: 5 %;
FIXED NEGATIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 26 V; Maximum Voltage Tolerance: 5 %; Moisture Sensitivity Level (MSL): 1;
LM2990S-5.0/NOPB
LM2990T-15
LM2990SX-5.0/NOPB
LM2990T-12/NOPB
FIXED NEGATIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 26 V; Maximum Voltage Tolerance: 5 %; Package Shape: RECTANGULAR;
LM2990S-15/NOPB
LM2990S-15/NOPB by Texas Instruments is a fixed negative single output LDO regulator with a nominal output voltage of 15V and max output current of 1A. It operates in temperatures ranging from -40°C to 125°C, making it suitable for various applications requiring stable voltage regulation in compact designs. With a small outline package style and gull wing terminal form, this regulator is ideal for surface mount applications where space is limited.
LM2990T-5.0
LM2990T-5.0 by Texas Instruments is a fixed negative single output LDO regulator with a max output current of 1A and a dropout voltage of 1V. It is commonly used in applications requiring stable and regulated power supply, such as automotive electronics and industrial control systems.
LM2990SX-15/NOPB
LM2990SX-12/NOPB
LM2990S-15
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved