Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
FIXED NEGATIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 26 V; Maximum Voltage Tolerance: 5 %;
Median Price
$2.730
Lifecycle Status
Suppliers In-Stock
22
In-Stock Inventory
1k+
Rochester
1+ parts
100+ parts
$2.560
1k+ parts
$2.320
10k+ parts
Digiode
$2.594
-
Nova Conductors
$3.518
Vyrian
Chip Stock
Anansix
Martec Srl
ComSIT Distribution GmbH
ComSIT USA
ACDS - Activité Composants Distribution Service
Holdelec - ElecDif-Pro
Semi Source
A2Z Electronics, Inc.
Manoshevitz Elec. Sales
EPE Components Inc.
Bristol Electronics
Connector Distribution Corp
Right Parts Inc.
LittleDiode
Prism Electronics
Elcom Components
PC Components Company LLC
Parana Technologies
$2.155
$2.667
Ampacity Inc.
IDEA Electronic Components Group
$2.421
$2.179
ChromeModa Solutions
$1.985
Advanced Electronics
$2.424
$2.206
$1.988
Corphita
$2.457
Continental Prestige Electronics
$3.448
Argo Parts USA
Netroflash
Corohmni
$8.450
AZTECH Wire
$10.965
Authorized Procurement Solutions
A-Z Elektronik GmbH
Alle Elektronik GmbH
DigiPath Technology Company
$2.183
Kepictronics
iodParts Technologies Inc.
Perfect Parts
Assy Fe
Montclair Electronics, Inc.
Fixed Regulators - Negative Single Output LDO LM2990T-15 attributes and parameters. Explore more Fixed Regulators - Negative Single Output LDO devices from National Semiconductor
Adjustability:
Maximum Dropout Voltage-1:
Nominal Dropout Voltage-1:
Maximum Input Voltage Absolute:
Maximum Input Voltage:
Minimum Input Voltage:
JESD-30 Code:
JESD-609 Code:
Maximum Line Regulation:
Maximum Load Regulation:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Outputs:
No. of Terminals:
Operating Temperature (TJ-Max):
Operating Temperature (TJ-Min):
Maximum Output Current-1:
Maximum Output Voltage-1:
Minimum Output Voltage-1:
Nominal Output Voltage-1:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Qualification Status:
Regulator Type:
Sub-Category:
Surface Mount:
Technology:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Maximum Voltage Tolerance:
LM2990T-15 Regulators trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
National Semiconductor was an American semiconductor manufacturer which specialized in analog devices and subsystems, formerly with headquarters in Santa Clara, California. The company produced power management integrated circuits, display drivers, audio and operational amplifiers, communication interface products and data conversion solutions. National's key markets included wireless handsets, displays and a variety of broad electronics markets, including medical, automotive, industrial and test and measurement applications.On September 23, 2011, the company formally became part of Texas Instruments as the "Silicon Valley" division.
E8WSDC12-32.768KTR
Ecliptek
PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Frequency Tolerance: 20 ppm; Aging: 3 PPM/YEAR; Load Capacitance: 12.5 pF; Nominal Operating Frequency: .032768 MHz;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
2N7002
North American Philips Discrete Products Div
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Operating Mode: ENHANCEMENT MODE; Maximum Drain Current (ID): .115 A;
BAV99
Vishay Sprague
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
DS18B20Z+T&R
Maxim Integrated
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Minimum Operating Temperature: -55 Cel; Package Body Material: PLASTIC/EPOXY;
LL4148
Good-ark Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
MMBT3906LT1G
Onsemi
MMBT3906LT1G by Onsemi is a PNP BJT with VCEsat of 0.4V, hFE of 30, and fT of 250MHz. Ideal for small signal applications in electronics due to its low power dissipation, high transition frequency, and compact SOT-23 package. Suitable for use in temperature-sensitive environments with an operating range from -65°C to 150°C.
SMBJ18CA
Continental Device India
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WS
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Maximum Repetitive Peak Reverse Voltage: 100 V; Config: SINGLE; No. of Phases: 1; No. of Elements: 1;
Sinyork
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Operating Temperature: 85 Cel; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Operating Mode: ENHANCEMENT MODE;
2N2222A
Vpt Components
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 1 W; Maximum Collector Current (IC): .8 A; Maximum Power Dissipation Ambient: .5 W;
LM358M
Fairchild Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Time At Peak Reflow Temperature (s): 30; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
Tesla Elektronicke Soucastky
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
CC0603KRX7R9BB103
Yageo
Yageo CC0603KRX7R9BB103 is a 0603 SMT ceramic capacitor with capacitance of 0.01uF and rated DC voltage of 50V. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance across temperatures.
C1210C104K5RACTU
KEMET Corporation
KEMET C1210C104K5RACTU is a ceramic capacitor with 0.1uF capacitance, rated for 50V. It has X7R temperature characteristics and ±10% tolerance, suitable for surface mount applications in a wide temperature range from -55°C to 125°C. Its compact rectangular package makes it ideal for various electronic devices.
Vishay Intertechnology
Vishay Intertechnology's SMBJ18CA is a bidirectional TRANS VOLTAGE SUPPRESSOR DIODE with a max clamping voltage of 29.2 V and a breakdown voltage of 21.05 V. It is surface mountable and commonly used in transient suppression applications.
EU2B-YS3203C
Idec
ROTARY SWITCH;
BSS138
Inter F E T
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Terminal Finish: TIN LEAD; Package Body Material: PLASTIC/EPOXY;
LT3015EMSE-5#PBF
Analog Devices
LT3015EMSE-5#PBF by Analog Devices is a Fixed Negative Single Output LDO Regulator with 1.5A max output current, 0.5V dropout voltage, and 2% voltage tolerance. Ideal for applications requiring stable 5V output in compact designs with surface mount capability.
LM2990T-5.0/NOPB
Texas Instruments
LM2990T-5.0/NOPB by Texas Instruments is a fixed negative single output LDO regulator with a max output current of 1A and a nominal output voltage of 5V. It has a dropout voltage of 1V, making it suitable for applications requiring stable power supply in temperature-sensitive environments. With a compact package style and high load regulation, it is ideal for use in various electronic devices where precise voltage regulation is crucial.
LT1175CQ-5#TRPBF
Linear Technology
FIXED NEGATIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: TO-263; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 20 V; Maximum Voltage Tolerance: 2.5 %;
UCC384DP-12TR
UCC384DP-12TR by Texas Instruments is a fixed negative single output LDO regulator with a nominal output voltage of 12V and max output current of 0.5A. It features a small outline package style, BCDMOS technology, and operates in temperatures ranging from -55 to 150°C. Ideal for applications requiring precise voltage regulation in compact electronic devices.
RP117K211D-TR
New Japan Radio
RP117K211D-TR by New Japan Radio is a fixed negative single output LDO regulator with a nominal output voltage of 2.1V and max dropout voltage of 0.45V. It operates in temperatures ranging from -40 to 125°C, making it suitable for applications requiring precise voltage regulation in compact electronic devices.
LT3015EQ-3#PBF
FIXED NEGATIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 33 V; Maximum Voltage Tolerance: 2 %; Maximum Time At Peak Reflow Temperature (s): 30;
LT1175IST-5#TRPBF
FIXED NEGATIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 4; Package Code: SOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 20 V; Maximum Voltage Tolerance: 2.5 %;
ADP7185ACPZN1.2-R7
Analog Devices' ADP7185ACPZN1.2-R7 is a CMOS technology-based LDO regulator with a fixed output voltage of 1.2V, suitable for applications requiring precise power management in compact spaces. With a wide operating temperature range from -40 to 125 °C and small outline package style, it offers reliable performance in various environments. The device features a surface-mount design with no-lead terminals, making it ideal for space-constrained electronic designs.
LT1964ES5-5#TRPBF
LT1964ES5-5#TRPBF by Analog Devices is a fixed negative single output LDO regulator with a max dropout voltage of 0.49V. It operates at temperatures ranging from -40°C to 125°C and has a max output current of 0.2A. This regulator is commonly used in applications requiring stable and regulated power supply, such as in electronic devices and circuits.
LT3015MPQ-2.5#TRPBF
LT3015MPQ-2.5#TRPBF by Analog Devices is a fixed negative single output LDO regulator with 1.5A max output current, 2% voltage tolerance, and 2.45V min output voltage. Ideal for applications requiring stable power supply in compact spaces like consumer electronics and industrial equipment.
FIXED NEGATIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: VSSOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 20 V; Maximum Voltage Tolerance: 3 %;
LT3015IT-5#TRPBF
LT3015IT-5#TRPBF by Analog Devices is a Fixed Negative Single Output LDO Regulator with 1.5A max output current, 0.68V dropout voltage, and 125 °C max operating temperature. Ideal for applications requiring stable 5V output voltage in environments ranging from -40°C to 125°C.
LT3015ET-12#TRPBF
Analog Devices' LT3015ET-12#TRPBF is a fixed negative single output LDO regulator with a max output current of 1.5A and a min input voltage of 12.5V. It has a nominal output voltage of 12V, making it suitable for applications requiring stable power supply in industrial settings or electronic devices with specific voltage requirements. The package style is flange mount, providing ease of installation and thermal management in various electronic systems.
LT1175IN8-5#PBF
LT1175IN8-5#PBF by Analog Devices is a Fixed Negative Single Output LDO Regulator with 5V nominal output voltage and 2.5% voltage tolerance. Operating temperature range from -40 to 85 °C makes it suitable for various applications requiring stable power supply in compact designs. Package style is in-line with through-hole terminals, ideal for PCB integration.
LT3015EQ-2.5#PBF
FIXED NEGATIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 33 V; Maximum Voltage Tolerance: 1 %; Nominal Dropout Voltage-1: .41 V;
LT3015IDD-2.5#TRPBF
FIXED NEGATIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 8; Package Code: HVSON; Terminal Form: NO LEAD; Maximum Input Voltage Absolute: 33 V; Maximum Voltage Tolerance: 1 %;
LM2990SX-5.0/NOPB
National Semiconductor
FIXED NEGATIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 3; Package Code: TO-263; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 26 V; Maximum Voltage Tolerance: 5 %;
LM2990T-15/NOPB
LM2990T-15/NOPB by Texas Instruments is a fixed negative single output LDO regulator with a max output current of 1A and nominal output voltage of 15V. It operates in temperatures ranging from -40°C to 125°C, making it suitable for various applications requiring stable voltage regulation in electronic circuits. With a dropout voltage of only 1V, this regulator offers efficient power management for devices with input voltages up to 26V.
Analog Devices' LT3015IDD-2.5#TRPBF is a fixed negative single output LDO regulator with a nominal output voltage of 2.5V and max output current of 1.5A. Operating temperature ranges from -40 to 125°C, making it suitable for various applications in electronics requiring stable power supply solutions. The package style is small outline, heat sink/slug, very thin profile, ideal for space-constrained designs.
5962-9571102MNA
Infineon Technologies
FIXED NEGATIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 3; Package Code: QCCN; Terminal Form: NO LEAD; Maximum Dropout Voltage-1: 1 V; Terminal Position: BOTTOM;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
FIXED NEGATIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 3; Package Code: SFM; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 26 V; Maximum Voltage Tolerance: 5 %;
FIXED NEGATIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 26 V; Maximum Voltage Tolerance: 5 %; Moisture Sensitivity Level (MSL): 1;
LM2990S-5.0/NOPB
LM2990T-15
LM2990T-12/NOPB
FIXED NEGATIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 26 V; Maximum Voltage Tolerance: 5 %; Package Shape: RECTANGULAR;
LM2990S-15/NOPB
LM2990S-15/NOPB by Texas Instruments is a fixed negative single output LDO regulator with a nominal output voltage of 15V and max output current of 1A. It operates in temperatures ranging from -40°C to 125°C, making it suitable for various applications requiring stable voltage regulation in compact designs. With a small outline package style and gull wing terminal form, this regulator is ideal for surface mount applications where space is limited.
LM2990T-5.0
LM2990T-5.0 by Texas Instruments is a fixed negative single output LDO regulator with a max output current of 1A and a dropout voltage of 1V. It is commonly used in applications requiring stable and regulated power supply, such as automotive electronics and industrial control systems.
LM2990SX-15/NOPB
LM2990SX-12/NOPB
LM2990T-5.2/NOPB
FIXED NEGATIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 26 V; Maximum Voltage Tolerance: 5 %; JESD-30 Code: R-PSFM-T3;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved