Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
FIXED NEGATIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 3; Package Code: TO-263; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 26 V; Maximum Voltage Tolerance: 5 %;
Median Price
$3.850
Lifecycle Status
Suppliers In-Stock
16
In-Stock Inventory
1k+
Rochester
1+ parts
-
100+ parts
$3.080
1k+ parts
$2.750
10k+ parts
$2.590
DigiKey
$4.050
Verical
$3.438
$3.237
TEDSS.com
$1.980
Freelance Electronics
$2.131
Digiode
$3.240
Nova Conductors
$3.790
Vyrian
Anansix
Prism Electronics
ComSIT Distribution GmbH
Ashlea Components Ltd
Electronics Depot
EMSNET
Mil-Aero Solutions, Inc.
Sunrise Surplus Inc.
Ampacity Inc.
$2.900
Corphita
$3.069
Parana Technologies
$3.636
$4.145
Aranea Global
$3.714
$3.566
ChromeModa Solutions
$4.085
$3.350
IDEA Electronic Components Group
$3.676
Kepictronics
A-Z Elektronik GmbH
Alle Elektronik GmbH
Infinite Electronics LLP (Excess)
Computer Components Inc. - USA
DigiPath Technology Company
$3.683
Perfect Parts
Speed Components Ltd (Excess)
SIE Connect GmbH (Excess)
Fixed Regulators - Negative Single Output LDO LM2990S-15 attributes and parameters. Explore more Fixed Regulators - Negative Single Output LDO devices from National Semiconductor
Adjustability:
Maximum Dropout Voltage-1:
Nominal Dropout Voltage-1:
Maximum Input Voltage Absolute:
Maximum Input Voltage:
Minimum Input Voltage:
JESD-30 Code:
JESD-609 Code:
Length:
Maximum Line Regulation:
Maximum Load Regulation:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Outputs:
No. of Terminals:
Operating Temperature (TJ-Max):
Operating Temperature (TJ-Min):
Maximum Output Current-1:
Maximum Output Voltage-1:
Minimum Output Voltage-1:
Nominal Output Voltage-1:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Qualification Status:
Regulator Type:
Maximum Seated Height:
Sub-Category:
Surface Mount:
Technology:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Maximum Voltage Tolerance:
Width:
LM2990S-15 Regulators trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Obsolescence/ EOL - EOL 18/Sept/2023
PCN Assembly/Origin - Mult Devices 21/Aug/2017
National Semiconductor was an American semiconductor manufacturer which specialized in analog devices and subsystems, formerly with headquarters in Santa Clara, California. The company produced power management integrated circuits, display drivers, audio and operational amplifiers, communication interface products and data conversion solutions. National's key markets included wireless handsets, displays and a variety of broad electronics markets, including medical, automotive, industrial and test and measurement applications.On September 23, 2011, the company formally became part of Texas Instruments as the "Silicon Valley" division.
BAV99+
Multicomp Pro
BAV99+ by Multicomp Pro is a series connected diode with 0.2A output current and 75V peak reverse voltage. Its 0.006us reverse recovery time makes it ideal for high-speed applications. This small outline rectifier diode is designed for surface mount installation in electronic circuits.
LM358AN
NXP Semiconductors
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
LL4148
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LL4148GS08
Temic Semiconductors
LL4148GS08 by Temic Semiconductors is a glass diode with a max reverse recovery time of 0.008 us and max forward voltage of 1 V. It is a rectifier diode with a max output current of 0.15 A, ideal for applications requiring fast switching speeds and low power dissipation in electronic circuits.
OPA2277UA
Burr-Brown Corporation
OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
2N7002
National Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Package Style (Meter): SMALL OUTLINE; Terminal Position: DUAL;
DS18B20Z+
Analog Devices
DS18B20Z+ by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.
BAV99
Allegro MicroSystems
RECTIFIER DIODE; Terminal Position: END; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
SS14
Taitron Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
NUP2105LT1G
Onsemi
NUP2105LT1G by Onsemi is a Transient Suppression Device with 350W power dissipation, 29.1V breakdown voltage, and 44V clamping voltage. Commonly used in electronic circuits for surge protection due to its bidirectional polarity and silicon diode element material.
Kec
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
Space Power Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
MBRS340T3G
MBRS340T3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.5V and output current of 4A. It operates b/w -65°C to 150°C, making it suitable for various applications requiring high-speed switching and low power loss in a small outline package. The diode's matte tin terminal finish and dual position make it ideal for surface mount PCB designs.
SPC TECHNOLOGY/ MULTICOMP
SMBJ18CA
Hy Electronic
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WS
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAT54C-7-F
Diodes Incorporated
BAT54C-7-F by Diodes Inc. is a Schottky rectifier diode with common cathode, 2 elements, and max forward voltage of 0.24V. Ideal for applications requiring fast reverse recovery time of 0.005 us, such as in small outline packages for surface mount technology at temperatures ranging from -65 to 150°C.
RC0402FR-071KL
Yageo
The Yageo RC0402FR-071KL is a fixed resistor with a resistance of 1000 ohm and a tolerance of 1%. It is suitable for surface mount applications and has a max operating temperature of 155 °C.
LM317T
Tt Electronics Plc
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Qualification Status: Not Qualified; JESD-30 Code: R-PSFM-T3;
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; No. of Terminals: 3;
TPS72325DBVRG4
Texas Instruments
TPS72325DBVRG4 by Texas Instruments is a fixed negative single output LDO regulator with a nominal output voltage of 2.5V and max output current of 0.2A. It operates in an extended temperature range from -40°C to 125°C, making it suitable for various applications requiring stable voltage regulation in compact spaces. The package style is small outline, low profile, shrink pitch, ideal for surface mount designs.
LT1175CN8-5
Analog Devices' LT1175CN8-5 is a fixed negative single output LDO regulator with a max dropout voltage of 0.5V and max output current of 0.5A. It operates b/w 0 to 125 °C, making it suitable for applications requiring stable 5V output voltage with low dropout and high accuracy requirements in various electronic devices.
LT1175MPS8-5#TR
Analog Devices' LT1175MPS8-5#TR is a fixed negative single output LDO regulator with a max output current of 0.5A and a nominal output voltage of 5V. It operates in temperatures ranging from -55 to 125 °C, making it suitable for various applications requiring stable voltage regulation in compact electronic devices.
LT1175CST-5
Analog Devices' LT1175CST-5 is a fixed negative single output LDO regulator with a max dropout voltage of 0.5V and max output current of 0.5A. It operates b/w 0 to 125 °C, making it suitable for applications requiring stable 5V output voltage in compact designs.
LT3015EQ-3.3#PBF
LT3015EQ-3.3#PBF by Analog Devices is a fixed negative single output LDO regulator with a nominal output voltage of 3.3 V and max output current of 1.5 A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation in compact designs.
RP117Q132D-TR-FE
Nisshinbo Micro Devices
FIXED NEGATIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: TSSOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: .3 V; Maximum Voltage Tolerance: 5 %;
LM2990T-5.2
LM2990T-5.2 by Texas Instruments is a fixed negative single output LDO regulator with a nominal output voltage of 5.2V and max output current of 1A. It has a low dropout voltage of 1V, making it suitable for applications requiring stable power supply in temperature-sensitive environments up to 125°C. The device comes in a through-hole package style with tin lead terminal finish, ideal for various electronic circuits that demand precise voltage regulation.
LT3015IT-2.5#PBF
LT3015IT-2.5#PBF by Analog Devices is a Fixed Negative Single Output LDO Regulator with 1.5A max output current, 2% voltage tolerance, and -40 to 125 °C operating temperature range. Ideal for applications requiring stable 2.5V output voltage in various electronic devices.
LT3015IQ-3.3#PBF
Linear Technology
FIXED NEGATIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 33 V; Maximum Voltage Tolerance: 2 %; Nominal Output Voltage-1: 3.3 V;
LT3015IMSE-2.5#PBF
LT3015IMSE-2.5#PBF by Analog Devices is a fixed negative single output LDO regulator with a nominal output voltage of 2.5V and max output current of 1.5A. It operates in temperatures ranging from -40 to 125 °C, making it suitable for various applications requiring stable voltage regulation in compact spaces.
LT1175CQ-5#TR
Analog Devices' LT1175CQ-5#TR is a fixed negative single output LDO regulator with a nominal output voltage of 5V and max voltage tolerance of 2.5%. This surface-mount device operates in temperatures ranging from 0°C to 70°C, making it suitable for various applications requiring stable power supplies in compact designs.
LT3015EMSE-5#PBF
LT3015EMSE-5#PBF by Analog Devices is a Fixed Negative Single Output LDO Regulator with 1.5A max output current, 0.5V dropout voltage, and 2% voltage tolerance. Ideal for applications requiring stable 5V output in compact designs with surface mount capability.
LT1175IS8-5#TRPBF
FIXED NEGATIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 20 V; Maximum Voltage Tolerance: 2.5 %;
LT3015ET-12#PBF
LT3015ET-12#PBF by Analog Devices is a Fixed Negative Single Output LDO Regulator with 1.5A max output current, 0.68V dropout voltage, and 2% voltage tolerance. Ideal for applications requiring stable 12V output voltage in temperature range of 0 to 125 °C such as industrial automation systems.
MIC5270-3.0YM5-TR
Micrel
FIXED NEGATIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: LSSOP; Terminal Form: GULL WING; Maximum Voltage Tolerance: 3 %; Minimum Output Voltage-1: 2.91 V;
LT1175IN8-5#PBF
LT1175IN8-5#PBF by Analog Devices is a Fixed Negative Single Output LDO Regulator with 5V nominal output voltage and 2.5% voltage tolerance. Operating temperature range from -40 to 85 °C makes it suitable for various applications requiring stable power supply in compact designs. Package style is in-line with through-hole terminals, ideal for PCB integration.
LT3015IMSE-5#PBF
LT3015IMSE-5#PBF by Analog Devices is a fixed negative single output LDO regulator with 1.5A max output current and 5V nominal output voltage. Operating temperature ranges from -40 to 125°C, making it suitable for various applications requiring stable power supply in compact spaces. Its small outline package with gull wing terminals and matte tin finish ensures reliable performance in surface mount configurations.
UCC284DP-12G4
UCC284DP-12G4 by Texas Instruments is a Fixed Negative Single Output LDO Regulator with 12V output voltage, 0.5A output current, and 3% voltage tolerance. It is ideal for applications requiring stable power supply in a compact package, suitable for surface mount assembly with operating temperatures ranging from -40°C to 85°C.
LT3015MPMSE-3#PBF
Analog Devices' LT3015MPMSE-3#PBF is a fixed negative single output LDO regulator with a max dropout voltage of 0.5V, operating temperature range from -55 to 125 °C, and max output current of 1.5A. It is suitable for applications requiring precise voltage regulation in compact spaces such as portable electronic devices or automotive systems.
LT1175IS8-5#PBF
Analog Devices' LT1175IS8-5#PBF is a fixed negative single output LDO regulator with a nominal output voltage of 5V and max dropout voltage of 0.7V. This surface-mount device operates in temperatures ranging from -40°C to 85°C, making it suitable for various applications requiring stable voltage regulation in compact spaces.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved