Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
OTP ROM; Temperature Grade: MILITARY; No. of Terminals: 20; Package Code: DIP; Package Shape: RECTANGULAR; Maximum Access Time: 60 ns;
Median Price
-
Lifecycle Status
Suppliers In-Stock
3
In-Stock Inventory
1k+
Anansix
1+ parts
100+ parts
1k+ parts
10k+ parts
Vyrian
Digiode
Corphita
OTP ROM DM54S472AJ/883 attributes and parameters. Explore more OTP ROM devices from National Semiconductor
Maximum Access Time:
JESD-30 Code:
JESD-609 Code:
Memory Density:
Memory IC Type:
Memory Width:
No. of Terminals:
No. of Words:
No. of Words Code:
Maximum Operating Temperature:
Minimum Operating Temperature:
Organization:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Power Supplies (V):
Qualification:
Screening Level:
Sub-Category:
Nominal Supply Voltage / Vsup (V):
Surface Mount:
Technology:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
DM54S472AJ/883 Memory ICs trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.32.00.71
SB
8542.32.00.70
National Semiconductor was an American semiconductor manufacturer which specialized in analog devices and subsystems, formerly with headquarters in Santa Clara, California. The company produced power management integrated circuits, display drivers, audio and operational amplifiers, communication interface products and data conversion solutions. National's key markets included wireless handsets, displays and a variety of broad electronics markets, including medical, automotive, industrial and test and measurement applications.On September 23, 2011, the company formally became part of Texas Instruments as the "Silicon Valley" division.
CRCW04020000Z0EDHP
Vishay Intertechnology
Vishay Intertechnology's CRCW04020000Z0EDHP is a 0402 SMT resistor with 0 ohm resistance, rated for temperatures from -55°C to 155°C. Ideal for jumper applications in automotive electronics due to AEC-Q200 compliance and compact size of 1mm x 0.5mm x 0.3mm.
USB2514BI-AEZG
Microchip Technology
USB2514BI-AEZG by Microchip is a BUS CONTROLLER IC with 36 terminals, operating at 3.3V, supporting I2C, SMBUS, and USB buses. It has a clock frequency of up to 24MHz and can withstand industrial temperatures from -40°C to 85°C. This chip carrier package is surface mountable and suitable for various applications requiring USB connectivity.
C1206C104M5RACTU
KEMET Corporation
KEMET C1206C104M5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125°C operating range, and ±20% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance across temperatures.
SMBJ18CA
Pro-an Electronic
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Polarity: BIDIRECTIONAL; Nominal Breakdown Voltage: 21.05 V; Maximum Repetitive Peak Reverse Voltage: 18 V;
LM107H
Advanced Micro Devices
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Maximum Bias Current (IIB) @25C: .075 uA;
BAV99
Cheng-yi Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
FDV303N
Onsemi
FDV303N by Onsemi is a N-CHANNEL FET with 25V DS Breakdown Voltage, 0.68A Drain Current, and 0.45 ohm On Resistance. Ideal for SWITCHING applications, it operates in ENHANCEMENT MODE at temperatures ranging from -55 to 150°C. Package style is SMALL OUTLINE with GULL WING terminals for surface mount assembly.
1N4148
New Jersey Semiconductor Products
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
2N7002
Continental Device India
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; Package Body Material: PLASTIC/EPOXY; JEDEC-95 Code: TO-236AB;
LM2675M-ADJ/NOPB
National Semiconductor
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
1N4148WT
Formosa Microsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Motorola
RECTIFIER DIODE; Surface Mount: YES; Maximum Output Current: .1 A; Maximum Reverse Recovery Time: .006 us; Maximum Repetitive Peak Reverse Voltage: 70 V; JESD-609 Code: e0;
1N4148WS
Synsemi
Micro Commercial Components
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Weitron Technology
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Inter F E T
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 7.5 ohm; Maximum Drain Current (Abs) (ID): .115 A;
2N7002 by Vishay Intertechnology is a N-CHANNEL FET with 60V DS Breakdown Voltage, 0.115A Drain Current, and 7.5 ohm On Resistance. Ideal for SWITCHING applications due to its SINGLE configuration with BUILT-IN DIODE. Operates in ENHANCEMENT MODE, suitable for surface mount with GULL WING terminals.
Wuxi Xuyang Electronic
M24308/2-1F
Adi Electronics
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; MIL Conformity: YES; Filter Feature: NO; Mating Info.: MULTIPLE MATING PARTS AVAILABLE;
LM358N
NXP Semiconductors
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
BQ2026LPR
Texas Instruments
BQ2026LPR by Texas Instruments is an OTP ROM with 1.5KX1 organization, operating in asynchronous mode at 3/5V. It features a memory density of 1536 bits and operates serially at a max clock frequency of 0.01667 MHz. This IC is commonly used for applications requiring non-volatile memory storage in devices with limited space constraints.
CY7C243-25PC
Cypress Semiconductor
CY7C243-25PC by Cypress Semiconductor is a 4KX8 OTP ROM with 3-STATE output, operating at 5V. It has a max access time of 25ns and memory density of 32768 bits. Commonly used in commercial applications requiring fast parallel memory access.
AT27C2048-90JU-T
Microchip Technology's AT27C2048-90JU-T is a 128Kx16 OTP ROM with 90 ns access time. Operating at 5V, it features 3-STATE output and supports parallel programming. Ideal for industrial applications requiring non-volatile memory with a capacity of 2Mb.
DS1982-F3
Dallas Semiconductor
OTP ROM; Temperature Grade: INDUSTRIAL; No. of Terminals: 2; Package Shape: ROUND; Terminal Position: RADIAL; Package Body Material: METAL;
AT27C4096-55JU
Microchip Technology's AT27C4096-55JU is a 256KX16 OTP ROM with 55 ns access time, operating at 5V. It features a 44-terminal chip carrier package and supports asynchronous mode. Ideal for industrial applications requiring non-volatile memory storage in a compact form factor.
SN54186W
SN54186W by Texas Instruments is a 64x8 OTP ROM with 75ns access time, operating b/w -55°C to 125°C. It features MIL-grade temperature rating and TTL technology, suitable for military applications requiring fast memory access in harsh environments. The flatpack package with 24 terminals and ceramic body ensures reliable performance in surface-mount configurations.
TBP18S22N1
TBP18S22N1 by Texas Instruments is a 256x8 OTP ROM with 2048-bit memory density. Operating at 5V, it has a max access time of 70ns and operates in commercial temperature grades. This rectangular package with 20 terminals is ideal for applications requiring non-volatile memory storage in TTL technology environments.
TBP28L45J
TBP28L45J by Texas Instruments is a 512x8 OTP ROM with 4096-bit memory density and 60ns max access time. It operates at a nominal voltage of 5V, suitable for commercial temperature grades. This rectangular ceramic package with 24 terminals is ideal for applications requiring reliable non-volatile memory storage in TTL technology.
5962-01-165-3131
Texas Instruments' 5962-01-165-3131 is a 32X8 OTP ROM with 5V supply, 40ns access time, and 110mA max supply current. Ideal for commercial applications requiring fast memory access in a rectangular plastic package with through-hole terminals.
TBP18SA46NP1
TBP18SA46NP1 by Texas Instruments is a 512x8 OTP ROM with 4096-bit memory density. It operates b/w 0-70°C, has a max access time of 75ns, and consumes up to 155mA. Ideal for commercial applications requiring reliable non-volatile memory in a rectangular package style with through-hole terminals.
JBP28L86MJ
JBP28L86MJ by Texas Instruments is a MILITARY-grade OTP ROM with 1KX8 organization, 8192-bit memory density, and 175 ns max access time. It operates b/w -55 to 125 °C and has a supply voltage of 5V. Ideal for applications requiring reliable non-volatile memory storage in harsh environments.
TBP18S030N3
TBP18S030N3 by Texas Instruments is a 32x8 OTP ROM with 5V supply, 40ns access time, and 110mA max supply current. It is used in commercial applications requiring non-volatile memory storage in a rectangular plastic/epoxy package with 16 terminals.
AT27C256R-12JC
Atmel
AT27C256R-12JC by Atmel is a 32KX8 OTP ROM with 3-STATE output, operating at 5V. It has a max access time of 120ns and is ideal for commercial applications requiring parallel memory technology. The chip carrier package style with J BEND terminals makes it suitable for surface mount assembly.
AT27C512R-15JC
AT27C512R-15JC by Atmel is a 64KX8 OTP ROM chip with 150 ns access time, operating at 5V. It features a 3-STATE output and operates in asynchronous mode. Commonly used for memory storage applications due to its 524288 bit density and parallel interface.
SN74186NP3
SN74186NP3 by Texas Instruments is a 64x8 OTP ROM IC with TTL technology. It operates b/w 0°C to 70°C, featuring a rectangular package with 24 terminals in an in-line style. Ideal for applications requiring non-volatile memory storage in commercial-grade environments.
93438DC
Fairchild Semiconductor
Fairchild Semiconductor's 93438DC is a 512x8 OTP ROM with memory density of 4096 bit. It operates b/w 0-70°C, using TTL technology in a ceramic rectangular package with 24 terminals. Ideal for commercial applications requiring non-volatile memory storage.
TBP18SA46JP4
TBP18SA46JP4 by Texas Instruments is a 512x8 OTP ROM with 4096-bit memory density. It operates b/w 0-70°C, has a max access time of 75ns, and consumes up to 155mA. Ideal for commercial applications requiring reliable non-volatile memory in a ceramic rectangular package with dual terminals.
TBP24S10NP1
TBP24S10NP1 by Texas Instruments is a 256x4 OTP ROM with 1024-bit memory density. It operates at 5V, has a max access time of 55ns, and supports TTL technology. This IC is ideal for applications requiring non-volatile memory storage in commercial-grade environments.
TBP28L86MJ
TBP28L86MJ by Texas Instruments is a 1Kx8 OTP ROM with 8192-bit memory density and 175 ns max access time. It operates at temperatures ranging from -55 to 125°C, making it suitable for military-grade applications requiring reliable non-volatile memory storage in harsh environments. The package style is in-line rectangular ceramic with 24 terminals on a 2.54mm pitch, ideal for through-hole mounting.
SN74S451N
SN74S451N by Texas Instruments is a 1KX8 OTP ROM IC with 8192-bit memory density. Operating b/w 0°C to 70°C, it features TTL technology and a rectangular package style with 24 terminals. Ideal for applications requiring non-volatile memory storage in commercial-grade environments.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved