Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
BUS TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 20; Package Code: SOP; Package Shape: RECTANGULAR;
Median Price
-
Lifecycle Status
Suppliers In-Stock
8
In-Stock Inventory
1k+
Digiode
1+ parts
100+ parts
1k+ parts
10k+ parts
Anansix
Semi Source
Vyrian
A&K Electronics
Bristol Electronics
Resion
Prism Electronics
Native Components
$1.160
Northwest PG Solutions
$1.276
A-Z Elektronik GmbH
QUARKTWIN TECHNOLOGY LTD
Problanco Electronics
Perfect Parts
TANS Electronics
SupplyDigital Components
Authorized Procurement Solutions
Kulean Microsystems
Supply Digital
Corphita
Corohmni
UHIMA Technologies
Microchip USA
Bus Driver & Transceivers 74ACT245SJ attributes and parameters. Explore more Bus Driver & Transceivers devices from National Semiconductor
Additional Features:
Control Type:
Count Direction:
Family:
JESD-30 Code:
JESD-609 Code:
Length:
Load Capacitance (CL):
Logic IC Type:
Maximum I (ol):
No. of Bits:
No. of Functions:
No. of Ports:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Output Characteristics:
Output Polarity:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Power Supplies (V):
Propagation Delay At Nominal Supply:
Propagation Delay (tpd):
Qualification:
Maximum Seated Height:
Sub-Category:
Maximum Supply Voltage (Vsup):
Minimum Supply Voltage (Vsup):
Nominal Supply Voltage / Vsup (V):
Surface Mount:
Technology:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Translation:
Width:
74ACT245SJ Logic ICs trade compliance attributes, and parameters.
HTS
8542.39.00.01
SB
8542.39.00.00
National Semiconductor was an American semiconductor manufacturer which specialized in analog devices and subsystems, formerly with headquarters in Santa Clara, California. The company produced power management integrated circuits, display drivers, audio and operational amplifiers, communication interface products and data conversion solutions. National's key markets included wireless handsets, displays and a variety of broad electronics markets, including medical, automotive, industrial and test and measurement applications.On September 23, 2011, the company formally became part of Texas Instruments as the "Silicon Valley" division.
LL4148
Leshan Radio
RECTIFIER DIODE; Surface Mount: YES; Maximum Non Repetitive Peak Forward Current: 2 A; Maximum Reverse Recovery Time: .004 us; No. of Phases: 1; Maximum Operating Temperature: 175 Cel;
1554216002
Molex
WIRE AND CABLE;
U.FL-R-SMT-1(10)
Hirose Electric
U.FL-R-SMT-1(10) by Hirose Electric is a RF connector with 50 ohm impedance, 0.05 dB insertion loss, and 8 GHz operating frequency. Ideal for board mounting in commercial applications, it features gold termination finish, liquid crystal polymer insulator, and 200VAC dielectric voltage resistance.
BAV99
Sensitron Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
Secos
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .6 A; JEDEC-95 Code: TO-92;
IRLML6402TRPBF
Infineon Technologies
IRLML6402TRPBF by Infineon is a P-CHANNEL FET for SWITCHING applications. It features a 20V DS Breakdown Voltage, 22A IDM, and 0.065 ohm RDS(on). With a small outline package and matte tin finish, it operates in temperatures from -55 to 150 °C.
BSS84-7-F
SPC TECHNOLOGY/ MULTICOMP
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Shape: RECTANGULAR; Transistor Element Material: SILICON;
LM358N
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
BAV99WT1G
Onsemi
BAV99WT1G by Onsemi is a series connected diode with 0.006 us reverse recovery time. It is a small outline rectifier diode with 70V peak reverse voltage, ideal for surface mount applications in electronics requiring fast switching and low forward voltage drop.
1N4148WS
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WT
Eic Semiconductor
CRCW04020000Z0ED
Vishay Intertechnology
Vishay Intertechnology's CRCW04020000Z0ED is a 0 ohm jumper resistor with METAL GLAZE/THICK FILM tech. Operating b/w -55 to 155 °C, it suits SMT applications in automotive electronics due to AEC-Q200 compliance and 0.063 W power dissipation.
IRLML6401TRPBF
International Rectifier
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.3 W; Minimum Operating Temperature: -55 Cel; Avalanche Energy Rating (EAS): 33 mJ;
261
Mercury Systems
Other Interface ICs; Temperature Grade: MILITARY; Terminal Form: FLAT; No. of Terminals: 14; Package Code: DFP; Package Shape: SQUARE;
Rugao Dachang Electronic
M39029/58-360
Defense Logistics Agency
CONNECTOR ACCESSORY; Contact Type: CRIMP REAR RELEASE; Mating Contacts: M39029/56-348, M39029/57-354; Insertion Tool Sources: MILITARY; Contact Gender: MALE; Alternate Contact Sources: MILITARY;
CL10B104KB8NNNC
Samsung Electro-mechanics
CL10B104KB8NNNC by Samsung Electro-mechanics is a ceramic capacitor with capacitance of 0.1uF and rated DC voltage of 50V. It has a negative tolerance of 10% and temperature coefficient of 15ppm/°C, suitable for surface mount applications in various electronic devices. With dimensions of 1.6mm x 0.8mm x 0.9mm, it operates b/w -55 to 125 °C providing stable performance in compact designs.
ULN2803A
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Package Body Material: PLASTIC/EPOXY; Qualification: Not Qualified;
1N4148
Sun Wai Electronic
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Reverse Recovery Time: .004 us; Maximum Repetitive Peak Reverse Voltage: 100 V;
Cobham Plc
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Minimum DC Current Gain (hFE): 100; Maximum Turn Off Time (toff): 300 ns;
SN74LV1T34DBVR
Texas Instruments
SN74LV1T34DBVR by Texas Instruments is a bus driver with 14.5 ns propagation delay, suitable for automotive applications. It operates at 1.8V nominal voltage and supports up to 30 pF load capacitance, making it ideal for low-power systems requiring fast signal transmission in compact spaces. With a small outline package style and dual terminal position, this device offers efficient performance in constrained environments while ensuring reliable data transmission at temperatures ranging from -40°C to 125°C.
CD74HCT245M
Intersil
BUS TRANSCEIVER; Temperature Grade: MILITARY; Terminal Form: GULL WING; No. of Terminals: 20; Package Code: SOP; Package Shape: RECTANGULAR;
CD40109BNSR
CD40109BNSR by Texas Instruments is a 4-bit bus driver with 600 ns propagation delay at 5V. It features 3-STATE output characteristics, operates in the temperature range of -55 to 125 °C, and has a max supply voltage of 18V. Ideal for military-grade applications requiring true output polarity control in compact designs.
74LCX125MTCX
74LCX125MTCX by Onsemi is a 4-function bus driver with a propagation delay of 6 ns at 2.5V, suitable for industrial applications. It operates at a supply voltage range of 2-3.6V, has a max operating temperature of 85°C, and features GULL WING terminals in a small outline package.
SN74AUP1G125DCKR
SN74AUP1G125DCKR by Texas Instruments is a bus driver with 21.4ns propagation delay, 30pF load capacitance, and 1.2V nominal voltage. It is ideal for industrial applications requiring a compact design, low power consumption, and true output polarity in a small outline package.
SN74HC245DWRE4
SN74HC245DWRE4 by Texas Instruments is an 8-bit bus driver with a propagation delay of 22ns at 6V. It features a small outline package, operates in industrial temperatures (-40 to 85°C), and has a max power supply current of 0.08mA. Ideal for bidirectional control applications requiring true output polarity.
SN74HC244NSRE4
SN74HC244NSRE4 by Texas Instruments is a 2-function bus driver & transceiver with a propagation delay of 29 ns and a load capacitance of 50 pF. It is commonly used in industrial applications due to its CMOS technology and wide temperature range (-40°C to 85°C).
SN74LVC4245ADBRG4
Texas Instruments SN74LVC4245ADBRG4 is an 8-bit bus driver with 3V/5V translation. It features a propagation delay of 6.7ns, operates at a supply voltage of 5V, and has a max operating temperature of 85°C. Ideal for bidirectional applications requiring common control in industrial settings.
CD40109BPWR
CD40109BPWR by Texas Instruments is a 4-bit bus driver with 600 ns propagation delay at 5V. It features a small outline package, true output polarity, and dual terminal position. Ideal for military-grade applications requiring UNIDIRECTIONAL control with ENABLE HIGH functionality.
74HC573D-Q100,118
NXP Semiconductors
NXP Semiconductors' 74HC573D-Q100,118 is an 8-bit bus driver with a propagation delay of 45 ns at 5V. AEC-Q100 screened for automotive applications, it features a true output polarity and operates b/w -40 to 125°C. Ideal for automotive electronics requiring fast signal transmission in compact spaces.
SN74LVC4245APWRE4
SN74LVC4245APWRE4 by Texas Instruments is an 8-bit bus driver with 3V & 5V translation, featuring a propagation delay of 6.7 ns. It operates at a nominal voltage of 5V and has a max operating temperature of 85°C. Ideal for bidirectional applications requiring fast signal transmission in industrial settings.
MM74HC245AWMX
Fairchild Semiconductor
SN74LVCH16T245DGGR
SN74LVCH16T245DGGR by Texas Instruments is a bus driver & transceiver with 2 functions, 8 bits, and operates at 1.8V nominal voltage. It has a propagation delay of 23.8ns and supports translation b/w 1.8V and 5V. Ideal for bidirectional applications in industrial settings due to its compact size, low power consumption, and wide operating temperature range from -40°C to 85°C.
SN74LVC573ADW
SN74LVC573ADW by Texas Instruments is an 8-bit bus driver with a propagation delay of 6.9 ns at 3.3V, suitable for automotive applications. It features a 3-STATE output and operates within a temperature range of -40 to 125°C, making it ideal for various electronic systems requiring fast signal transmission. With a small outline package style and surface mount capability, this CMOS technology device offers efficient performance in compact designs.
SN74LV1T34DBVRG4
SN74LV1T34DBVRG4 by Texas Instruments is a bus driver with 14.5 ns propagation delay, suitable for automotive applications. It operates at a supply voltage range of 1.6V to 5.5V and has a max power supply current of 0.0055 mA. With a compact design and dual terminal position, it offers efficient signal transmission in space-constrained environments.
74HC540D,652
NXP Semiconductors' 74HC540D,652 is an 8-bit bus driver with a propagation delay of 30ns at 5V. It features a small outline package and operates in the temperature range of -40 to 125°C. Ideal for automotive applications requiring inverted output polarity and low enable control.
74LVC1T45GW-Q100H
Nexperia
BUS TRANSCEIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 6; Package Code: TSSOP; Package Shape: RECTANGULAR;
74LVC1G125GW-Q100
BUS DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 5; Package Code: TSSOP; Package Shape: RECTANGULAR;
SN74HCT540DWRG4
SN74HCT540DWRG4 by Texas Instruments is an 8-bit bus driver with a propagation delay of 25 ns at 5V. It features a 3-STATE output and operates in industrial temperature range (-40 to 85 °C). Ideal for applications requiring fast signal transmission and control over multiple ports.
SN74LV1T34DCKRG4
SN74LV1T34DCKRG4 by Texas Instruments is a bus driver with 14.5 ns propagation delay, suitable for automotive applications. It operates at 1.8V with 30pF load capacitance and features a small outline package style. With dual terminal position and Gull Wing form, it offers true output polarity and can handle up to 8A max I (ol).
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved