Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Murata Manufacturing's PVG3A502C01R00 is a 5000 ohm linear trimmer resistor with 20% tolerance. It operates b/w -55 to 125 °C, suitable for applications requiring precise resistance adjustments in a compact SMT package. The screw actuator allows for easy adjustment within a wide 210° rotation angle.
Median Price
$0.725
Lifecycle Status
Suppliers In-Stock
21
In-Stock Inventory
1k+
Newark
1+ parts
$1.230
100+ parts
$0.854
1k+ parts
$0.696
10k+ parts
$0.646
Chip1Stop
$1.450
$0.557
$0.541
-
Distrelec
$1.611
$1.222
$0.973
TTI
$0.707
$0.627
Master Electronics
$0.663
$0.612
Bürklin Elektronik
$0.630
$0.550
Farnell
$0.743
$0.542
Element14
$1.270
$0.923
Verical
$0.706
Arrow
$0.574
Component Electronics Inc.
$3.850
$2.880
$2.500
Electro Sonic
$0.611
$0.549
IBS Electronics
$0.563
$0.676
Bristol Electronics
TME
ComSIT Distribution GmbH
ComSIT USA
Atlantic Semiconductor
Semi Source
Nova Conductors
Semtec, LLC
Perfect Parts
Continental Prestige Electronics
$0.720
$0.556
$0.445
Netroflash
Cyclops Electronics Ltd (Excess)
Operating within a temperature range of -55 to 125 °C ensures reliable performance in various environmental conditions.
With a resistance of 5000 ohm, this variable resistor can be used for precise adjustments in a circuit.
The 20% tolerance ensures that the resistance value stays within an acceptable range, providing consistent performance.
With a rated power dissipation of 0.25 W, this variable resistor can handle moderate power loads without overheating.
The wraparound terminal shape allows for easy soldering and secure connections, ensuring stable performance.
Variable Resistors PVG3A502C01R00 attributes and parameters. Explore more Variable Resistors devices from Murata Manufacturing
Orientation (Actuator):
Type (Actuator):
Construction:
Ganging Number:
JESD-609 Code:
Mounting Type:
No. of Terminals:
No. of Turns:
Maximum Operating Temperature:
Minimum Operating Temperature:
Height (Package):
Length (Package):
Shape (Package):
Package Style (Meter):
Width (Package):
Packing Method:
Rated Power Dissipation (P):
Rated Temperature:
Resistance:
Law Of Resistance:
Resistor Type:
Angle Of Rotation:
Size Code:
Sub-Category:
Technology:
Temperature Coef (ppm/Cel):
Terminal Finish:
Terminal Shape:
Tolerance:
Operating Voltage:
PVG3A502C01R00 Resistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8533.40.80.50
SB
8533.40.00.80
Murata Manufacturing Co., Ltd. is a Japanese electronics manufacturer founded in 1944 by Akira Murata. Through its expansive supply chain network and innovative product portfolio, Murata designs and manufactures a wide variety of electronic components including capacitors, inductor coils, buzzers, sensors and more for applications in the automotive, medical, industrial and consumer sectors. Based in Nagaokakyo City in Kyoto Prefecture of Japan, Murata operates factories around the world with other facilities located throughout Asia Pacific region such as China and Thailand; North America; Europe; Latin America; Middle East & Africa; as well as Oceania.
Chairman of the Board
Tsuneo Murata
President
Norio Nakajima
Senior Executive VP, Board Member
Hiroshi Iwatsubo
Murata Integrated Passive Solution
Fabrication
Fab Initiation
1989
France
Caen
Wafer Capacity
12,500
Sendai Fab
2008
Japan
Sendai
20,000
Kanazawa - Fab 2
2016
Hakusan
10,000
Komoro
1980
Yasu Plant
1987
Yasu
14,500
Kanazawa Plant
1985
5,000
Vantaa - Fab 1
1998
Finland
Vantaa
Vantaa - Fab 2
2006
12,000
SMBJ18CA
Db Lectro
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
AT90CAN128-16AUR
Microchip Technology
AT90CAN128-16AUR by Microchip: 16 MHz clock, 8-bit data RAM, and 131072 ROM words. Ideal for industrial applications with CAN, SPI, TWI connectivity and low power mode. Contains 4 timers, 8 ADC channels, and supports up to 10-bit analog to digital conversion.
LM317T
Motorola
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; No. of Outputs: 1; Package Equivalence Code: SIP3,.1TB;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
BSS138
North American Philips Discrete Products Div
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; No. of Elements: 1; Maximum Drain Current (Abs) (ID): .2 A;
LM78L05ACMX/NOPB
National Semiconductor
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
CRCW06031K00FKEAHP
Vishay Intertechnology
Vishay Intertechnology's CRCW06031K00FKEAHP is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.33 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance and operating voltage of 75 V.
1N4148
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
2N2222A
SPC TECHNOLOGY/ MULTICOMP
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
1552200253
Molex
WIRE AND CABLE;
BAV99
Secos
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
PIC18F4550-I/PT
PIC18F4550-I/PT by Microchip: 8-bit microcontroller with 44 terminals, 48 MHz clock frequency, and USB connectivity. Ideal for industrial applications requiring low power mode and 10-bit ADC channels.
BSS138-7-F
Diodes Incorporated
Diodes Inc. BSS138-7-F is a N-channel FET with 50V DS breakdown voltage, 0.2A max drain current, and 3.5 ohm RDS(on). Ideal for switching applications in small outline packages with matte tin finish, operating up to 150°C peak reflow temp.
Thinking Electronic Industrial
Analog Devices
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; No. of Functions: 1; Package Body Material: PLASTIC/EPOXY; Surface Mount: NO;
1N4148WS
Rugao Dachang Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ERJ6ENF10R0V
Panasonic
Panasonic ERJ6ENF10R0V is a 10 ohm fixed resistor with 1% tolerance, suitable for surface mount applications. With a rated power dissipation of 0.125W and operating voltage of 150V, it operates b/w -55°C to 155°C. Its metal glaze/thick film technology ensures stable performance in various electronic circuits.
Bourns
Daco Semiconductor
LM107H
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Code: TO-99; Package Shape: ROUND;
3290H-1-103
The Bourns 3290H-1-103 is a 10000 ohm linear wire wound trimmer resistor with 25 turns and 5% tolerance. It has a rated power dissipation of 1W, operates b/w -65 to 150 °C, and has an actuator type of screw. Ideal for PCB mount applications requiring precise resistance adjustments in a compact through-hole package.
3299X-1-502LF
The Bourns 3299X-1-502LF is a linear trimmer pot with a resistance of 5000 ohm and a tolerance of 10%. It is commonly used in PCB mount applications where precise resistance adjustments are required.
PVZ2R104C04R00
Murata Manufacturing
Murata Manufacturing's PVZ2R104C04R00 is a 100k ohm linear carbon trimmer resistor with 3 terminals. It has a temperature coefficient of 500 ppm/°C and operates b/w -25 to 85 °C. Ideal for applications requiring precise resistance adjustments in compact SMT packages.
PS45-20MA1BR5K
Tt Electronics Plc
PS45-20MA1BR5K by Tt Electronics Plc is a linear conductive plastic potentiometer with 5000 ohm resistance, 20% tolerance, and 0.125 W power dissipation. It is used in applications requiring precise voltage control, such as audio equipment and industrial machinery.
3296P-1-502LF
Bourns 3296P-1-502LF is a 5000 ohm CERMET trimmer resistor with linear resistance law, 25 turns, and 10% tolerance. Ideal for applications requiring precise resistance adjustments in circuits with operating voltage up to 300V. Suitable for through-hole mounting with a max temperature of 125°C.
PDB181-K220K-503B
Bourns PDB181-K220K-503B is a rotary carbon potentiometer with 50000 ohm resistance, 20% tolerance, and 200V operating voltage. Ideal for panel mount applications, it offers a wide temperature range from -10 to 50°C and features a compact package size of 17mm diameter and 9.5mm length.
PTV09A-4020U-B103
Bourns PTV09A-4020U-B103 is a linear potentiometer with 10000 ohm resistance, 20% tolerance, and 280° rotation angle. It is used in PCB mount applications for adjusting voltage levels in electronic circuits. Operating temperature ranges from -10 to 50 °C.
3048L-2-503
Bourns 3048L-2-503 is a compact potentiometer with 50000 ohm resistance, 20% tolerance, and 0.12 W power dissipation. Ideal for PCB mount applications, it operates b/w -55 to 125 °C with a temperature coefficient of 1000 ppm/°C.
3224X-1-504E
Bourns 3224X-1-504E is a linear trimmer pot with 12 turns, 500000 ohm resistance, and 10% tolerance. Ideal for surface mount applications in electronics due to its compact SMT package style and high operating temperature range from -65°C to 150°C. The cermet technology and screw actuator make it suitable for precise adjustments in various circuits.
3386W-1-104LF
Bourns 3386W-1-104LF is a CERMET trimmer resistor with 100k ohm resistance, 10% tolerance, and 0.5 W power dissipation. It has a linear law of resistance and operates b/w -55 to 125 °C. Ideal for PCB mounting applications requiring precise resistance adjustments.
3266X-1-103LF
Bourns 3266X-1-103LF is a CERMET trimmer resistor with 12 turns, 10000 ohm resistance, and linear law. It operates b/w -55 to 150 °C and has a power dissipation of 0.25 W. Ideal for precision applications requiring variable resistance control in electronic circuits.
T73XX205KT20
Vishay Intertechnology's T73XX205KT20 is a CERMET trimmer resistor with 2000000 ohm resistance, 10% tolerance, and 240° rotation angle. It is used in PCB mounting applications for temperature-sensitive circuits requiring precise resistance adjustments within -55 to 125 °C range.
3224W-1-104E
The Bourns 3224W-1-104E is a linear trimmer resistor with 12 turns, 100k ohm resistance, and 10% tolerance. It operates b/w -65°C to 150°C, making it suitable for temperature-sensitive applications. With SMT package style and J bend terminals, it's ideal for surface mounting in various electronic devices.
25VR100LF
25VR100LF by Tt Electronics Plc is a CERMET variable resistor with 100 ohm resistance, linear law, and 10% tolerance. It operates b/w -55 to 125 °C and has a rated power dissipation of 0.5 W. Ideal for PCB mounting in applications requiring precise resistance adjustments.
PTB0144-2010BPA103
The Bourns PTB0144-2010BPA103 is a 10000 ohm potentiometer with a slide actuator, rated for 0.25 W power dissipation. It features a vertical orientation, carbon technology, and audio law of resistance. Ideal for PCB mounting applications requiring a 350 V operating voltage range.
3590S-1-502L
Bourns 3590S-1-502L is a 5000 ohm linear wire wound potentiometer with 10 turns, 5% tolerance, and rated power dissipation of 2W. It has a circular package with panel mount style for applications requiring precise resistance adjustment in electronic circuits. Operating temperature range from -40 to 125 °C makes it suitable for various industrial settings.
3296W-1-503LF
Bourns 3296W-1-503LF is a CERMET multi-turn trimmer resistor with 50000 ohm resistance, 25 turns, and linear resistance law. It operates b/w -55 to 125 °C and has a tolerance of 10%. Ideal for applications requiring precise voltage adjustments in circuits with operating voltages up to 300 V.
3361P-1-503GLF
Bourns 3361P-1-503GLF is a CERMET variable resistor with 50000 ohm resistance, linear law, and 10% tolerance. It operates b/w -55 to 125 °C, has a power dissipation of 0.5 W, and can handle up to 300 V. Ideal for applications requiring precise resistance adjustments in compact SMT designs.
PA16NP104MAB15
Vishay Intertechnology's PA16NP104MAB15 is a 100k ohm linear potentiometer with 20% tolerance, suitable for panel mount applications. Featuring a circular package with a diameter of 16mm and an operating voltage of 224V, it has an angle of rotation of 270°. This conductive plastic resistor operates b/w -40°C to 85°C, making it ideal for various electronic control systems.
PTC15NV02104A2020
Piher Sensors And Controls Sa
PTC15NV02104A2020 by Piher Sensors And Controls Sa is a CERMET variable resistor with 100000 ohm resistance, 20% tolerance, and 0.5 W power dissipation. Ideal for PCB mount applications, it operates b/w -40 to 90 °C with a temperature coefficient of 100 ppm/°C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
PVG3A103C01R00
PVG3A103C01R00 by Murata is a 10000 ohm linear trimmer resistor with 20% tolerance, suitable for surface mount applications. It operates b/w -55 to 125 °C and has a temperature coefficient of 150 ppm/°C. The rectangular package measures 3.6mm in length, 3.4mm in width, and 2mm in height, with an actuator type of screw for a rotation angle of 210°.
PVG3A203C01R00
TRIMMER; Mounting Type: SURFACE MOUNT; Resistance: 20000 ohm; Rated Power Dissipation (P): .25 W; Maximum Operating Temperature: 125 Cel; Tolerance: 20 %;
PVG3G501C01R00
TRIMMER; Mounting Type: SURFACE MOUNT; Resistance: 500 ohm; Rated Power Dissipation (P): .25 W; Maximum Operating Temperature: 125 Cel; Tolerance: 20 %;
PVG3A503C01R00
TRIMMER; Mounting Type: SURFACE MOUNT; Resistance: 50000 ohm; Rated Power Dissipation (P): .25 W; Maximum Operating Temperature: 125 Cel; Tolerance: 20 %;
PVG3A100C01R00
TRIMMER; Mounting Type: SURFACE MOUNT; Resistance: 10 ohm; Rated Power Dissipation (P): .25 W; Maximum Operating Temperature: 125 Cel; Tolerance: 20 %;
PVG3A101C01R00
TRIMMER; Mounting Type: SURFACE MOUNT; Resistance: 100 ohm; Rated Power Dissipation (P): .25 W; Maximum Operating Temperature: 125 Cel; Tolerance: 20 %;
PVG3G103C01R00
TRIMMER; Mounting Type: SURFACE MOUNT; Resistance: 10000 ohm; Rated Power Dissipation (P): .25 W; Maximum Operating Temperature: 125 Cel; Tolerance: 20 %;
PVG3A501C01R00
PVG3G101C01R00
PVG3A202C01R00
PVG3A202C01R00 by Murata is a 2000 ohm linear trimmer resistor with 20% tolerance. It operates b/w -55 to 125 °C, suitable for surface mount applications at 200V. Featuring a CERMET technology, it has a temperature coefficient of 150 ppm/°C and an angle of rotation of 210°.
PVG3A102C01R00
TRIMMER; Mounting Type: SURFACE MOUNT; Resistance: 1000 ohm; Rated Power Dissipation (P): .25 W; Maximum Operating Temperature: 125 Cel; Tolerance: 20 %;
PVG3G104C01R00
TRIMMER; Mounting Type: SURFACE MOUNT; Resistance: 100000 ohm; Rated Power Dissipation (P): .25 W; Maximum Operating Temperature: 125 Cel; Tolerance: 20 %;
PVG3A500C01B00
TRIMMER; Mounting Type: SURFACE MOUNT; Resistance: 50 ohm; Rated Power Dissipation (P): .25 W; Maximum Operating Temperature: 125 Cel; Tolerance: 20 %;
PVG3A500C01R00
PVG3A501C01B00
PVG3A502C01B00
TRIMMER; Mounting Type: SURFACE MOUNT; Resistance: 5000 ohm; Rated Power Dissipation (P): .25 W; Maximum Operating Temperature: 125 Cel; Tolerance: 20 %;
PVG3A503C01B00
PVG3A504C01B00
TRIMMER; Mounting Type: SURFACE MOUNT; Resistance: 500000 ohm; Rated Power Dissipation (P): .25 W; Maximum Operating Temperature: 125 Cel; Tolerance: 20 %;
PVG3A502C01R00
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved