Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
PS45M-1MD2LR20K by Tt Electronics Plc is a linear potentiometer with 20000 ohm resistance, 20% tolerance, and 0.125 W power dissipation. Ideal for applications requiring precise voltage control in PCB-mounted devices due to its slide actuator type and through-hole mounting.
Median Price
$2.070
Lifecycle Status
Suppliers In-Stock
3
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
100+ parts
$1.530
1k+ parts
-
10k+ parts
Vyrian
Nova Conductors
Aztec Data Supply Inc.
$0.420
AZTECH Wire
$8.987
Continental Prestige Electronics
Argo Parts USA
Bastille Electronics
Vertical orientation allows for easy installation and adjustment in most electronic circuits.
Linear resistance ensures a proportional change in resistance with the movement of the actuator, providing precise control over the circuit.
Rectangular construction makes the variable resistor easy to integrate into circuit designs and provides stability during operation.
With a resistance of 20000 ohm, this variable resistor is suitable for a wide range of applications requiring precise resistance values.
Having 4 terminals allows for flexibility in circuit connections and enables more precise control over resistance values.
PCB mount package style makes it easy to solder the variable resistor directly onto a PCB, saving space and simplifying the assembly process.
Flat terminal shape ensures a secure connection and easy soldering onto PCBs or other circuit components.
Compact height of 7mm allows for easy integration into tight spaces in electronic devices.
Potentiometer design allows for smooth and precise adjustment of resistance, making it suitable for applications requiring variable control.
Slide actuator type provides a convenient and intuitive way to adjust the resistance value in real-time.
A tolerance of 20% ensures that the actual resistance value stays within an acceptable range, providing reliability in circuit operation.
A length of 60mm provides ample space for the variable resistor to be mounted securely onto a PCB or other surfaces.
Through hole mount allows for easy and secure installation of the variable resistor onto a PCB or other mounting surfaces.
With a rated power dissipation of 0.125W, this variable resistor can handle moderate power loads without overheating or failing.
Width of 9mm ensures compatibility with standard PCB layouts and makes it easy to integrate the variable resistor into circuit designs.
Having a ganging number of 2 allows for multiple variable resistors to be interconnected for combined resistance control in complex circuit designs.
Variable Resistors PS45M-1MD2LR20K attributes and parameters. Explore more Variable Resistors devices from Tt Electronics Plc
Orientation (Actuator):
Type (Actuator):
Additional Features:
Construction:
Ganging Number:
Mounting Type:
No. of Terminals:
No. of Turns:
Height (Package):
Length (Package):
Package Style (Meter):
Width (Package):
Rated Power Dissipation (P):
Resistance:
Law Of Resistance:
Resistor Type:
Terminal Shape:
Tolerance:
PS45M-1MD2LR20K Resistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
Our primary focus areas for growth and investment are in the end markets of healthcare, aerospace & defence, and automation & electrification which includes products that address resource scarcity, improve energy efficiency, support renewables and drive productivity, connectivity and health.
BAV99
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Promax-johnton
BSS138LT3G
Onsemi
BSS138LT3G by Onsemi is a N-CHANNEL FET with a min DS breakdown voltage of 50V. It is used for switching applications and has a max drain current of 0.2A and max drain-source on resistance of 3.5 ohm.
CRCW04020000Z0EDHP
Vishay Intertechnology
Vishay Intertechnology's CRCW04020000Z0EDHP is a 0402 SMT resistor with 0 ohm resistance, rated for temperatures from -55°C to 155°C. Ideal for jumper applications in automotive electronics due to AEC-Q200 compliance and compact size of 1mm x 0.5mm x 0.3mm.
SMBJ18CA
Goodwork Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Hitachi
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
National Semiconductor
NE555D
NXP Semiconductors
SQUARE; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: LSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
AB26TRB-32.768KHZ--T
Abracon
AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.
1N4148WS
Taitron Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Changzhou Galaxy Century Microelectronics
SBAV99LT1G
SBAV99LT1G by Onsemi is a rectifier diode with a max repetitive peak reverse voltage of 100V. It has a small outline package style and a fast max reverse recovery time of 0.006 us. It is commonly used in applications requiring low power dissipation and high operating temperatures.
NDT2955
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 3 W; JESD-609 Code: e0; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
BSS123,215
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Moisture Sensitivity Level (MSL): 1; No. of Terminals: 3; Maximum Time At Peak Reflow Temperature (s): 30;
2N2222A
Micro Commercial Components
Small Signal Bipolar Transistors; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JESD-609 Code: e0;
SS14
Hitano Enterprise
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Diotec Semiconductor Ag
1N4148WT
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
MMBT3904-7-F
Diodes Incorporated
Diodes Inc. MMBT3904-7-F is a NPN BJT transistor for switching applications. Features include VCEsat of 0.3V, hFE of 30, and IC of 0.2A. With a max operating temp of 150°C, it's ideal for small outline SMT designs in automotive electronics.
2N7002
Zetex Plc
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Peak Reflow Temperature (C): 260; Package Shape: RECTANGULAR;
409HA104M
TE Connectivity
TE Connectivity's 409HA104M is a CERMET variable resistor with 100k ohm resistance, linear law, and 20% tolerance. It has a max operating temperature of 100°C and is used in PCB mount applications for voltage control with a rated power dissipation of 0.5W.
P0915N-FC15BR100K
Tt Electronics Plc
P0915N-FC15BR100K by Tt Electronics Plc is a linear conductive plastic potentiometer with 100k ohm resistance, 20% tolerance, and 0.05W power dissipation. It is used in applications requiring precise control of electrical resistance, such as panel mount PCB assemblies for temperature-sensitive devices.
3299Y-1-102
Bourns
Bourns 3299Y-1-102 is a CERMET trimmer pot with 1000 ohm resistance, 25 turns, and linear resistance law. Ideal for PCB mounting applications, it has a max operating temperature of 125°C and operates at voltages up to 300V. The package is rectangular with through-hole mounting, making it suitable for various electronic circuits.
RV4NAYSD252A
Ohmite Manufacturing
POTENTIOMETER; Mounting Type: PANEL MOUNT; Resistance: 2500 ohm; Rated Power Dissipation (P): 2 W; Maximum Operating Temperature: 120 Cel; Diameter (Package): 29.4 mm;
TSM4YJ204KB25
Vishay Intertechnology's TSM4YJ204KB25 is a CERMET TRIMMER with 11 turns, linear resistance law, and 10% tolerance. Operating voltage of 200 V, rated power of 0.25 W, and temperature coefficient of 100 ppm/°C make it ideal for precision applications in electronics. Its compact SMT package with wraparound terminals suits surface mounting type for various electronic devices.
3224W-1-501E
The Bourns 3224W-1-501E is a 500 ohm linear trimmer resistor with 12 turns and a temperature coefficient of 100 ppm/°C. It has a rated power dissipation of 0.25 W, suitable for surface mount applications in electronic circuits requiring precise resistance adjustments. The resistor operates within a wide temperature range from -65 to 150 °C, making it versatile for various industrial and consumer electronics.
93R1A-R22-A20L
The Bourns 93R1A-R22-A20L is a linear cermet potentiometer with 100k ohm resistance, 10% tolerance, and 2W power dissipation. It operates b/w -40°C to 125°C, making it suitable for various panel mount applications requiring precise resistance adjustments in a compact form factor. The shaft actuator allows for easy adjustment with a rotation angle of 240°.
T7YA105MT20
Vishay Intertechnology's T7YA105MT20 is a CERMET variable resistor with 1000000 ohm resistance, 20% tolerance, and 0.06 W power dissipation. It is used in PCB mounting applications for temperature-sensitive circuits due to its -55 to 125 °C operating range and linear resistance law. The trimmer type screw actuator allows precise adjustments in various electronic devices.
PTV09A-4020F-B104
Bourns PTV09A-4020F-B104 is a linear carbon potentiometer with 100k ohm resistance, 20% tolerance, and 280° rotation angle. It is used in applications requiring precise voltage control on PCBs due to its rectangular package shape and flat terminal design.
89PHR10LF
89PHR10LF by Tt Electronics Plc is a TRIMMER resistor with 10 ohm resistance, rated for 0.75 W power dissipation and 20% tolerance. It features CERMET technology, LINEAR resistance law, and operates b/w -55 to 125 °C. Ideal for PCB mounting applications requiring precise resistance adjustments in a compact rectangular package.
PS45-11PC3BR10K
PS45-11PC3BR10K by Tt Electronics Plc is a linear conductive plastic potentiometer with 10000 ohm resistance, 20% tolerance, and 0.25 W power dissipation. It is a PCB mount slide potentiometer suitable for applications requiring precise voltage control in compact spaces.
1-1624217-0
TE Connectivity's 1-1624217-0 is a linear carbon film potentiometer with 10000 ohm resistance, 10% tolerance, and 0.4 W power dissipation. It has a circular package with horizontal actuator orientation and shaft actuator type. Ideal for through hole mounting applications.
534B1202JC
Vishay Intertechnology's 534B1202JC is a 2000 ohm linear wire wound potentiometer with 10 turns and 5% tolerance. Operating at temperatures from -55 to 125 °C, it has a rated power of 2W and operates at an operating voltage of 63.2V. Ideal for precise resistance adjustments in various electronic applications.
14910F0GJSX10502KA
Vishay Intertechnology's 14910F0GJSX10502KA is a CERMET trimmer pot with 5000 ohm resistance, 10% tolerance, and 1W power dissipation. Ideal for PCB mount applications, it operates b/w -40 to 125 °C with a temperature coefficient of 150 ppm/°C.
3296P-1-500LF
Bourns 3296P-1-500LF is a 50 ohm, 25-turn linear cermet trimmer resistor with a tolerance of 10%. Operating voltage of 300V and rated power dissipation of 0.5W. Ideal for applications requiring precise resistance adjustments in electronic circuits.
23BR20KLFTR
23BR20KLFTR by Tt Electronics Plc is a 20000 ohm linear trimmer resistor with CERMET technology. It operates b/w -55 to 125 °C, has a tolerance of 20%, and can handle up to 200 V. Ideal for surface mount applications requiring precise resistance adjustments in electronic circuits.
RK2711120026
Alps Electric
POTENTIOMETER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 100000 ohm; Rated Power Dissipation (P): .05 W; Maximum Operating Temperature: 70 Cel; Tolerance: 20 %;
3299Z-1-503LF
Bourns 3299Z-1-503LF is a CERMET trimmer pot with 50000 ohm resistance, 25 turns, and linear resistance law. It has a max operating temperature of 125°C and is ideal for PCB mounting applications requiring precise voltage adjustments in electronic circuits.
PS100-1B1BR5K
PS100-1B1BR5K by Tt Electronics Plc is a linear conductive plastic potentiometer with 5000 ohm resistance, 20% tolerance, and 0.25 W power dissipation. It is used in PCB mount applications for precise voltage control due to its slide actuator and through-hole mounting capability.
P271-DS11R5K
P271-DS11R5K by Tt Electronics Plc is a 5000 ohm linear potentiometer with 10% tolerance and 2W power dissipation. It has a circular package, horizontal actuator orientation, and conductive plastic technology. Ideal for panel mount applications, it operates b/w -55°C to 120°C temperatures.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
PS45-10MA1BR5K
POTENTIOMETER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 5000 ohm; Rated Power Dissipation (P): .25 W; Tolerance: 20 %; No. of Terminals: 3;
POTENTIOMETER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 10000 ohm; Rated Power Dissipation (P): .25 W; Tolerance: 20 %; Package Style (Meter): PCB Mount;
PS45-20MA1BR5K
PS45-20MA1BR5K by Tt Electronics Plc is a linear conductive plastic potentiometer with 5000 ohm resistance, 20% tolerance, and 0.125 W power dissipation. It is used in applications requiring precise voltage control, such as audio equipment and industrial machinery.
PS45M-0MC2LR10KN
POTENTIOMETER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 10000 ohm; Rated Power Dissipation (P): .125 W; Tolerance: 20 %; Ganging Number: 2;
PS45M-1MD2LR200KN
POTENTIOMETER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 200000 ohm; Rated Power Dissipation (P): .125 W; Tolerance: 20 %; Package Style (Meter): PCB Mount;
PS45M-1MD2LR20KN
POTENTIOMETER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 20000 ohm; Rated Power Dissipation (P): .125 W; Tolerance: 20 %; No. of Turns: 1;
PS45M-1MD2LR2K
POTENTIOMETER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 2000 ohm; Rated Power Dissipation (P): .125 W; Tolerance: 20 %; No. of Terminals: 4;
PS45M-1MD2LR500KN
POTENTIOMETER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 500000 ohm; Rated Power Dissipation (P): .125 W; Tolerance: 20 %; No. of Turns: 1;
PS45M-1MD2LR50K
POTENTIOMETER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 50000 ohm; Rated Power Dissipation (P): .125 W; Tolerance: 20 %; Ganging Number: 2;
PS45M-1MD2LR50KN
POTENTIOMETER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 50000 ohm; Rated Power Dissipation (P): .125 W; Tolerance: 20 %; Orientation (Actuator): VERTICAL;
PS45M-1MD2LR1MEG
POTENTIOMETER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 1000000 ohm; Rated Power Dissipation (P): .125 W; Tolerance: 20 %; Length (Package): 60 mm;
PS45M-1MD2LR1MEGN
PS45M-1MD2LR500K
POTENTIOMETER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 500000 ohm; Rated Power Dissipation (P): .125 W; Tolerance: 20 %; Package Style (Meter): PCB Mount;
PS45M-1MD2LR500N
POTENTIOMETER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 500 ohm; Rated Power Dissipation (P): .125 W; Tolerance: 20 %; Ganging Number: 2;
PS45M-1MD2LR5K
POTENTIOMETER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 5000 ohm; Rated Power Dissipation (P): .125 W; Tolerance: 20 %; Law Of Resistance: LINEAR;
PS45M-1MD2LR10K
POTENTIOMETER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 10000 ohm; Rated Power Dissipation (P): .125 W; Tolerance: 20 %; Width (Package): 9 mm;
PS45M-1MD2LR1K
POTENTIOMETER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 1000 ohm; Rated Power Dissipation (P): .125 W; Tolerance: 20 %; Height (Package): 7 mm;
PS45M-1MD2LR1KN
POTENTIOMETER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 1000 ohm; Rated Power Dissipation (P): .125 W; Tolerance: 20 %; Additional Features: RATED AC VOLTAGE (V): 200;
PS45M-1MD2LR100K
POTENTIOMETER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 100000 ohm; Rated Power Dissipation (P): .125 W; Tolerance: 20 %; No. of Terminals: 4;
PS45M-1MD2LR5KN
POTENTIOMETER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 5000 ohm; Rated Power Dissipation (P): .125 W; Tolerance: 20 %; Height (Package): 7 mm;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved