Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
PVG3G501C01R00 by Murata is a 500 ohm linear trimmer resistor with CERMET technology. It has an operating voltage of 200V, temperature coefficient of 150 ppm/°C, and can handle temperatures from -55 to 125 °C. Ideal for applications requiring precise resistance adjustments in compact SMT packages.
Median Price
$0.627
Lifecycle Status
Suppliers In-Stock
15
In-Stock Inventory
1k+
Adafruit Industries
1+ parts
$0.019
100+ parts
$0.017
1k+ parts
$0.016
10k+ parts
-
Arrow
$0.163
Mouser Electronics
$1.230
$0.854
$0.681
$0.609
Master Electronics
$0.645
$0.563
Verical
$0.763
DigiKey
$0.707
$0.585
TTI
Chip1Stop
$0.564
Nova Conductors
$0.722
Electro Sonic
$0.647
$0.575
IBS Electronics
$0.905
$0.790
Vyrian
ComSIT Distribution GmbH
PC Components Company LLC
Bristol Electronics
Advanced Electronics
Aranea Global
$0.708
$0.679
Authorized Procurement Solutions
Perfect Parts
This product can operate efficiently at temperatures up to 70°C, making it suitable for a variety of environments.
The vertical orientation of the actuator makes it easy to adjust and control, providing convenient usability.
The cermet technology used in this variable resistor ensures high precision and stability in resistance values, making it a reliable choice.
The rectangular package shape allows for easy installation and compatibility with a wide range of electronic devices.
The linear law of resistance ensures a proportional change in resistance value, providing accurate and consistent performance.
With a resistance value of 500 ohms, this variable resistor offers versatility in applications and precise control over current flow.
Having 3 terminals allows for easy connection and compatibility with different circuit configurations.
The SMT package style enables surface mount installation, saving space and providing a sleek appearance.
The high maximum operating temperature of 125°C ensures a wide range of application possibilities and durability in harsh conditions.
With a temperature coefficient of 150 ppm/°C, this variable resistor maintains stable resistance values over a range of temperatures.
The rated power dissipation of 0.25 W indicates the amount of power this resistor can handle without overheating, ensuring long-term reliability.
Variable Resistors PVG3G501C01R00 attributes and parameters. Explore more Variable Resistors devices from Murata Manufacturing
Orientation (Actuator):
Type (Actuator):
Construction:
Ganging Number:
JESD-609 Code:
Mounting Type:
No. of Terminals:
No. of Turns:
Maximum Operating Temperature:
Minimum Operating Temperature:
Height (Package):
Length (Package):
Shape (Package):
Package Style (Meter):
Width (Package):
Packing Method:
Rated Power Dissipation (P):
Rated Temperature:
Resistance:
Law Of Resistance:
Resistor Type:
Angle Of Rotation:
Size Code:
Sub-Category:
Technology:
Temperature Coef (ppm/Cel):
Terminal Finish:
Terminal Shape:
Tolerance:
Operating Voltage:
PVG3G501C01R00 Resistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8533.40.80.50
SB
8533.40.00.80
Murata Manufacturing Co., Ltd. is a Japanese electronics manufacturer founded in 1944 by Akira Murata. Through its expansive supply chain network and innovative product portfolio, Murata designs and manufactures a wide variety of electronic components including capacitors, inductor coils, buzzers, sensors and more for applications in the automotive, medical, industrial and consumer sectors. Based in Nagaokakyo City in Kyoto Prefecture of Japan, Murata operates factories around the world with other facilities located throughout Asia Pacific region such as China and Thailand; North America; Europe; Latin America; Middle East & Africa; as well as Oceania.
Chairman of the Board
Tsuneo Murata
President
Norio Nakajima
Senior Executive VP, Board Member
Hiroshi Iwatsubo
Murata Integrated Passive Solution
Fabrication
Fab Initiation
1989
France
Caen
Wafer Capacity
12,500
Sendai Fab
2008
Japan
Sendai
20,000
Kanazawa - Fab 2
2016
Hakusan
10,000
Komoro
1980
Yasu Plant
1987
Yasu
14,500
Kanazawa Plant
1985
5,000
Vantaa - Fab 1
1998
Finland
Vantaa
Vantaa - Fab 2
2006
12,000
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
BSS138
Taitron Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3.5 ohm; Maximum Drain Current (ID): .2 A; Peak Reflow Temperature (C): NOT SPECIFIED;
BAT54C-7-F
Diodes Incorporated
BAT54C-7-F by Diodes Inc. is a Schottky rectifier diode with common cathode, 2 elements, and max forward voltage of 0.24V. Ideal for applications requiring fast reverse recovery time of 0.005 us, such as in small outline packages for surface mount technology at temperatures ranging from -65 to 150°C.
1N4148
Bkc Semiconductors
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LL4148
Hy Electronic
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
2N7002
Comchip Technology
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Operating Temperature: 150 Cel; Operating Mode: ENHANCEMENT MODE;
BAV99
MICRODIODE ELECTRONICS SHENZHEN CO LTD
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
ERJU06F10R0V
Panasonic
ERJU06F10R0V by Panasonic is an 0805 size SMT fixed resistor with a resistance of 10 ohm and 1% tolerance. It operates b/w -55 to 155 °C, suitable for AEC-Q200 standards in automotive applications due to its high temperature coefficient of 100 ppm/°C. With a max operating voltage of 150 V and power dissipation of 0.125 W, it is ideal for surface mounting type.
BSS138BK,215
NXP Semiconductors
NXP Semiconductors' BSS138BK,215 is a N-CHANNEL FET with 0.36A max drain current and 0.42W power dissipation. Ideal for applications requiring single configuration and surface mount technology, such as enhancement mode operation in temperatures up to 150°C.
2N2222A
Transistor & Electronic
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LM317T
Linear Technology
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Operating Temperature (TJ-Min): 0 Cel; No. of Functions: 1; JESD-609 Code: e0;
LM358ADR
Texas Instruments
LM358ADR by Texas Instruments is an operational amplifier with 2 functions, featuring a max input offset voltage of 5000 uV and nominal voltage of 5V. Widely used in applications requiring high voltage gain, it operates within a temperature range of 0-70°C and offers frequency compensation for stability.
Infineon Technologies
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Transistor Element Material: SILICON; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
Sangdest Microelectronics (Nanjing)
SS14
Cheng-yi Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Rfe International
RECTIFIER DIODE; Surface Mount: NO; No. of Elements: 1; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Forward Voltage (VF): 1 V; Config: SINGLE;
M24308/2-1F
Souriau-sunbank Connection Technologies
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body Length: 1.228 inch; Mounting Type: CABLE AND PANEL; Termination Type: CRIMP;
C0603C104K5RACAUTO
KEMET Corporation
KEMET C0603C104K5RACAUTO is a ceramic capacitor with 0.1uF capacitance, rated for 50V. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for automotive applications meeting AEC-Q200 standard, it comes in SMT package with matte tin finish and wraparound terminals.
Loras Industries
Micro Commercial Components
Small Signal Bipolar Transistors; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JESD-609 Code: e0;
CMU1511E
Ohmite Manufacturing
The Ohmite Manufacturing CMU1511E is a 150 ohm linear potentiometer with 3 terminals. It has a rated power dissipation of 2W and operates b/w -55°C to 120°C. Ideal for panel mount applications, this circular package resistor features a shaft actuator and horizontal orientation.
91A1A-B28-A10L
Bourns
The Bourns 91A1A-B28-A10L is a linear cermet potentiometer with 1000 ohm resistance, 10% tolerance, and 2W power dissipation. It operates b/w -40 to 125 °C and has a temperature coefficient of 150 ppm/°C. Ideal for panel mount applications requiring precise resistance adjustments in a compact package.
P10XXAI502KB30
Vishay Intertechnology
Vishay Intertechnology's P10XXAI502KB30 is a CERMET POTENTIOMETER with 10% Tolerance, 50 V Operating Voltage, and 0.5 W Rated Power Dissipation. It is ideal for PCB Mount applications requiring precise linear resistance adjustments in temperatures ranging from -55 to 125°C.
3386W-1-102LF
Bourns 3386W-1-102LF is a linear trimmer resistor with 1000 ohm resistance, 10% tolerance, and 0.5 W power dissipation. It is used in PCB mount applications for temperature-sensitive circuits due to its wide operating range from -55 to 125 °C. The rectangular package with wire terminals makes it suitable for through-hole mounting.
M43P502KB30T601
Vishay Intertechnology's M43P502KB30T601 is a CERMET trimmer resistor with 5000 ohm resistance, 10% tolerance, and 0.75 W power dissipation. Ideal for PCB mount applications, it operates b/w -55 to 125 °C with a temperature coefficient of 100 ppm/°C.
TC73W-1-202E
Bourns TC73W-1-202E is a SMT POTENTIOMETER with 2000 ohm resistance, 30% tolerance, and 50V operating voltage. Ideal for applications requiring precise resistance adjustments in compact spaces due to its small package size (3.6mm x 3.1mm x 1.8mm) and wide 260° angle of rotation capability.
1-1879318-8
TE Connectivity
POTENTIOMETER; Orientation (Actuator): VERTICAL; Dimensions: 17.3mm x 16mm x 6.5mm;
89PHR500KLF
Tt Electronics Plc
89PHR500KLF by Tt Electronics Plc is a TRIMMER resistor with 500000 ohm resistance, rated at 0.75 W power dissipation. It has a linear law of resistance, operates b/w -55 to 125 °C, and features CERMET technology. Ideal for PCB mounting applications requiring precise resistance adjustments in electronic circuits.
22AR50KLFTR
22AR50KLFTR by Tt Electronics Plc is a CERMET variable resistor with 50000 ohm resistance, 3 terminals, and linear law of resistance. It operates b/w -50 to 125 °C and has a tolerance of 20%. Used in applications requiring precise voltage adjustments in compact SMT packages.
P16NP472MAB15
Vishay Intertechnology's P16NP472MAB15 is a 4700 ohm CERMET POTENTIOMETER with linear resistance law and 20% tolerance. It has a rated power dissipation of 1W, operates b/w -40 to 85 °C, and features a circular package for panel mount applications.
3266W-1-501LF
Bourns 3266W-1-501LF is a 500 ohm, linear law, multi-turn trimmer resistor with 12 turns and CERMET technology. Operating voltage of 300V, rated power dissipation of 0.25W, and temperature coefficient of 100 ppm/°C make it ideal for precision applications in electronics. Suitable for through hole mounting with a vertical actuator type.
3382G-1-252G
POTENTIOMETER;
T93XA502KT20
Vishay Intertechnology's T93XA502KT20 is a 5000 ohm linear trimmer resistor with 21 turns, rated for temperatures b/w -55 to 125 °C. It features a CERMET technology in a rectangular package suitable for PCB mounting applications. With an operating voltage of 50 V and power dissipation of 0.5 W, it offers precise resistance adjustment in various electronic circuits.
PTC15LV02-103A2020
Amphenol
Amphenol's PTC15LV02-103A2020 is a CERMET POTENTIOMETER with 10000 ohm resistance, 20% tolerance, and 0.5 W power dissipation. It has a linear law of resistance and operates b/w -40 to 90 °C. Ideal for PCB mounting applications requiring precise voltage control in a compact package.
TSM4YJ201KR05
Vishay Intertechnology's TSM4YJ201KR05 is a 11-turn linear cermet trimmer resistor with 10% tolerance, operating voltage of 7.07V, and rated power dissipation of 0.25W. It is designed for surface mount applications in various electronic circuits requiring precise resistance adjustments within a temperature range of -55 to 155°C.
3382G-1-103G
Bourns 3382G-1-103G is a linear potentiometer with 10000 ohm resistance, 30% tolerance, and 0.05 W power dissipation. It has a vertical actuator orientation and gull wing terminal shape. Ideal for applications requiring precise voltage control in electronic circuits.
TC73W-1-102E
The Bourns TC73W-1-102E is a SMT carbon potentiometer with 1000 ohm resistance, 30% tolerance, and 50V operating voltage. It is ideal for applications requiring precise resistance adjustments in compact spaces. With a temperature range of -25 to 85 °C, it offers reliable performance in various electronic devices.
P0915N-FC15BR50K
P0915N-FC15BR50K by Tt Electronics Plc is a linear conductive plastic potentiometer with 50000 ohm resistance, 20% tolerance, and 300° rotation angle. It is used in applications requiring precise resistance adjustments such as audio equipment, lighting controls, and industrial machinery.
RK27112A00CC
Alps Electric
POTENTIOMETER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 100000 ohm; Rated Power Dissipation (P): .05 W; Maximum Operating Temperature: 70 Cel; Tolerance: 20 %;
PTB6053-2010APB103
The Bourns PTB6053-2010APB103 is a linear carbon potentiometer with 10000 ohm resistance, 20% tolerance, and 0.25 W power dissipation. It features a vertical actuator orientation, slide type actuator, and through hole mount for PCB applications. Ideal for precise voltage control in electronic circuits with operating temperatures ranging from -10 to 60 °C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
PVG3A103C01R00
Murata Manufacturing
PVG3A103C01R00 by Murata is a 10000 ohm linear trimmer resistor with 20% tolerance, suitable for surface mount applications. It operates b/w -55 to 125 °C and has a temperature coefficient of 150 ppm/°C. The rectangular package measures 3.6mm in length, 3.4mm in width, and 2mm in height, with an actuator type of screw for a rotation angle of 210°.
PVG3A203C01R00
TRIMMER; Mounting Type: SURFACE MOUNT; Resistance: 20000 ohm; Rated Power Dissipation (P): .25 W; Maximum Operating Temperature: 125 Cel; Tolerance: 20 %;
PVG3A503C01R00
TRIMMER; Mounting Type: SURFACE MOUNT; Resistance: 50000 ohm; Rated Power Dissipation (P): .25 W; Maximum Operating Temperature: 125 Cel; Tolerance: 20 %;
PVG3A100C01R00
TRIMMER; Mounting Type: SURFACE MOUNT; Resistance: 10 ohm; Rated Power Dissipation (P): .25 W; Maximum Operating Temperature: 125 Cel; Tolerance: 20 %;
PVG3A101C01R00
TRIMMER; Mounting Type: SURFACE MOUNT; Resistance: 100 ohm; Rated Power Dissipation (P): .25 W; Maximum Operating Temperature: 125 Cel; Tolerance: 20 %;
PVG3G103C01R00
TRIMMER; Mounting Type: SURFACE MOUNT; Resistance: 10000 ohm; Rated Power Dissipation (P): .25 W; Maximum Operating Temperature: 125 Cel; Tolerance: 20 %;
PVG3A501C01R00
TRIMMER; Mounting Type: SURFACE MOUNT; Resistance: 500 ohm; Rated Power Dissipation (P): .25 W; Maximum Operating Temperature: 125 Cel; Tolerance: 20 %;
PVG3G101C01R00
PVG3A202C01R00
PVG3A202C01R00 by Murata is a 2000 ohm linear trimmer resistor with 20% tolerance. It operates b/w -55 to 125 °C, suitable for surface mount applications at 200V. Featuring a CERMET technology, it has a temperature coefficient of 150 ppm/°C and an angle of rotation of 210°.
PVG3A102C01R00
TRIMMER; Mounting Type: SURFACE MOUNT; Resistance: 1000 ohm; Rated Power Dissipation (P): .25 W; Maximum Operating Temperature: 125 Cel; Tolerance: 20 %;
PVG3A502C01R00
TRIMMER; Mounting Type: SURFACE MOUNT; Resistance: 5000 ohm; Rated Power Dissipation (P): .25 W; Maximum Operating Temperature: 125 Cel; Tolerance: 20 %;
PVG3G104C01R00
TRIMMER; Mounting Type: SURFACE MOUNT; Resistance: 100000 ohm; Rated Power Dissipation (P): .25 W; Maximum Operating Temperature: 125 Cel; Tolerance: 20 %;
PVG3G501C01B00
PVG3G500C01B00
TRIMMER; Mounting Type: SURFACE MOUNT; Resistance: 50 ohm; Rated Power Dissipation (P): .25 W; Maximum Operating Temperature: 125 Cel; Tolerance: 20 %;
PVG3G502C01R00
PVG3G503C01R00
PVG3G500C01R00
PVG3G501C01R00
PVG3G504C01R00
TRIMMER; Mounting Type: SURFACE MOUNT; Resistance: 500000 ohm; Rated Power Dissipation (P): .25 W; Maximum Operating Temperature: 125 Cel; Tolerance: 20 %;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved