Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Bourns PTA6043-2015DPB103 is a linear potentiometer with 10000 ohm resistance, 20% tolerance, and 0.25 W power dissipation. It has a slide actuator type and operates at voltages up to 200 V. Ideal for applications requiring precise voltage control in PCB mount setups.
Median Price
$1.910
Lifecycle Status
Suppliers In-Stock
13
In-Stock Inventory
1k+
Farnell
1+ parts
$1.570
100+ parts
$1.030
1k+ parts
-
10k+ parts
Distrelec
$1.760
DigiKey
$1.325
$1.098
$0.962
Mouser Electronics
$1.320
$1.090
$0.990
Bürklin Elektronik
$1.500
$1.310
Newark
$2.670
$1.720
$1.400
$1.270
Element14
$3.410
$2.040
$1.840
Master Electronics
$1.269
$1.114
$0.966
Verical
$1.494
$1.423
Nova Conductors
$1.130
Electro Sonic
$1.144
$0.985
$0.874
IBS Electronics
$1.780
$1.562
$1.355
Vyrian
Corohmni
$0.104
Aztec Data Supply Inc.
$0.441
Semicontronic
$0.970
$0.946
$0.941
Argo Parts USA
$1.099
Bastille Electronics
$1.074
$1.020
$1.006
Continental Prestige Electronics
$2.110
$1.100
$1.000
Authorized Procurement Solutions
Perfect Parts
The vertical orientation allows for easy adjustment and control.
Carbon technology provides stable and reliable resistance values.
The rectangular package shape is commonly used and easy to mount.
Linear resistance provides a consistent and predictable output.
The rectangular construction is durable and space-saving.
With a resistance of 10000 ohm, this variable resistor is versatile and suitable for a wide range of applications.
Three terminals allow for easy connection and adjustment.
PCB mounting style ensures secure installation on a circuit board.
Flat terminals provide stable connections.
With a maximum operating temperature of 50°C, this variable resistor can withstand heat and harsh environments.
The minimum operating temperature of -10°C ensures reliable performance in cold conditions.
Tin terminal finish provides corrosion resistance and good conductivity.
The 3.7 mm lead length allows for easy connection.
The 5.7 mm package height is compact and space-efficient.
Potentiometer type allows for precise voltage control.
Slide actuator type enables smooth and easy adjustment.
With an operating voltage of 200 V, this variable resistor is suitable for high-power applications.
The 20% tolerance ensures accurate and consistent resistance values.
The 75 mm package length provides ample space for installation.
Through-hole mounting type offers secure and stable installation.
With a rated power dissipation of 0.25 W, this variable resistor can handle moderate power loads.
The 9 mm package width is compact and efficient for space-constrained applications.
Variable Resistors PTA6043-2015DPB103 attributes and parameters. Explore more Variable Resistors devices from Bourns
Orientation (Actuator):
Type (Actuator):
Construction:
Ganging Number:
JESD-609 Code:
Length (Lead):
Mounting Type:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Height (Package):
Length (Package):
Shape (Package):
Package Style (Meter):
Width (Package):
Rated Power Dissipation (P):
Resistance:
Law Of Resistance:
Resistor Type:
Sub-Category:
Technology:
Terminal Finish:
Terminal Shape:
Tolerance:
Operating Voltage:
PTA6043-2015DPB103 Resistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8533.40.80.70
SB
8533.40.00.80
Bourns, Inc. is an American electronics company that develops, manufactures and supplies electronic components for a variety of industries including automotive, industrial, instrumentation, medical electronics, consumer equipment and portable electronics. Established in Altadena, California in 1947 by Marlan and Rosemary Bourns, graduates of the University of Michigan, the company was founded to develop and sell electronic components and sensors to the aerospace industry. Bourns has 15 manufacturing facilities around the world and has continued growing through the development of new products and technologies as well as through acquisitions. The company has approximately 9000 employees worldwide.
IRLML6401TRPBF
Infineon Technologies
IRLML6401TRPBF by Infineon is a P-CHANNEL FET for SWITCHING applications. It features a 12V DS Breakdown Voltage, 34A IDM, and 0.05ohm RDS(on). With a small outline package style, it operates in an ambient temperature range of -55 to 150 °C.
2N7002
Nte Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Transistor Application: SWITCHING; Maximum Drain Current (ID): .115 A; No. of Terminals: 3;
B340A-13-F
SPC TECHNOLOGY/ MULTICOMP
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
AT90CAN128-16AUR
Microchip Technology
AT90CAN128-16AUR by Microchip: 16 MHz clock, 8-bit data RAM, and 131072 ROM words. Ideal for industrial applications with CAN, SPI, TWI connectivity and low power mode. Contains 4 timers, 8 ADC channels, and supports up to 10-bit analog to digital conversion.
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
NE555/D
General Electric Solid State
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; Maximum Operating Temperature: 70 Cel; Technology: BIPOLAR; Package Equivalence Code: DIE OR CHIP; Qualification: Not Qualified;
LM555CMX
Onsemi
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
ULN2803A
YOUTAI SEMICONDUCTOR CO LTD
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 18; Package Code: SOP; Package Shape: RECTANGULAR; JESD-30 Code: R-PDSO-G18;
1N4148
Shanghai Lunsure Electronic Technology
RECTIFIER DIODE; Surface Mount: NO; Maximum Forward Voltage (VF): 1 V; Maximum Output Current: .15 A; Maximum Reverse Recovery Time: .004 us; Config: SINGLE;
M24308/2-1F
TE Connectivity
TE Connectivity's M24308/2-1F D-Sub Connector features 9 contacts, 2 rows, and a shell size of 1/E. With a rated current of 7.5A, it operates b/w -55°C to 125°C. Ideal for cable mounting applications, this connector has a steel shell with cadmium finish and uses crimp termination for female contact pins.
SMBJ18CA
Jiangsu Jiejie Microelectronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
New Jersey Semiconductor Products
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Package Shape: ROUND;
ERJ6ENF10R0V
Panasonic
Panasonic ERJ6ENF10R0V is a 10 ohm fixed resistor with 1% tolerance, suitable for surface mount applications. With a rated power dissipation of 0.125W and operating voltage of 150V, it operates b/w -55°C to 155°C. Its metal glaze/thick film technology ensures stable performance in various electronic circuits.
2N7002-7-F
Diodes Incorporated
Diodes Inc. 2N7002-7-F is a N-channel FET with 60V DS breakdown voltage, 0.115A max drain current, and 13.5 ohm RDS(on). Ideal for switching applications in enhancement mode operation. Features Gull Wing terminals, small outline package style, and operates up to 150°C.
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
ROHM
DS18B20Z
Dallas Semiconductor
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Housing: PLASTIC; Maximum Accuracy (Cel): 0.50;
Swampscott Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
BSS123,215
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Moisture Sensitivity Level (MSL): 1; No. of Terminals: 3; Maximum Time At Peak Reflow Temperature (s): 30;
ULN-2803A
Sprague Electric
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: OTHER; Terminal Form: THROUGH-HOLE; No. of Terminals: 18; Package Code: DIP; Package Shape: RECTANGULAR;
T93YB201KT20
Vishay Intertechnology
Vishay Intertechnology's T93YB201KT20 is a 200 ohm linear trimmer resistor with 21 turns and 10% tolerance. It operates b/w -55 to 125 °C, suitable for PCB mounting applications requiring precise resistance adjustments in a compact rectangular package. The resistor features a screw actuator, matte tin terminal finish, and can handle up to 0.5 W power dissipation.
M63M201KB40
Vishay Intertechnology's M63M201KB40 is a CERMET variable resistor with 200 ohm resistance, 10% tolerance, and 0.5 W power dissipation. Ideal for PCB mounting, it operates b/w -55 to 125 °C and offers a 270° rotation angle.
ST-2TA102
Nidec Copal Electronics
ST-2TA102 by Nidec Copal Electronics is a 1000 ohm linear trimmer resistor with 3 terminals. It operates b/w -55 to 125 °C and has a tolerance of 20%. Ideal for applications requiring precise resistance adjustments in compact SMT packages.
7-1879321-1
POTENTIOMETER; Orientation (Actuator): HORIZONTAL; Dimensions: 13.75mm x 11.7mm x 5.1mm;
3362U-1-503LF
Bourns
Bourns 3362U-1-503LF is a CERMET trimmer resistor with 50000 ohm resistance, linear law, and 10% tolerance. It is used in PCB mount applications for temperature compensation circuits due to its wide operating range (-55 to 125 °C) and low temp coefficient (100 ppm/°C).
RK2711120026
Alps Alpine
Alps Alpine RK2711120026 is a linear potentiometer with 100k ohm resistance, 20% tolerance, and 300° rotation angle. It is used in PCB mount applications for precise control of electronic devices with operating temperatures ranging from -10 to 70 °C.
3296W-1-104LF
Bourns 3296W-1-104LF is a CERMET multi-turn trimmer resistor with 100000 ohm resistance, 25 turns, and linear resistance law. It operates b/w -55 to 125 °C and has a tolerance of 10%. Ideal for applications requiring precise voltage adjustments in electronic circuits.
PVZ3A104C01R00
Murata Manufacturing
Murata Manufacturing's PVZ3A104C01R00 is a 100k ohm linear trimmer resistor with 30% tolerance. It operates at -25 to 85°C, has a power dissipation of 0.1W, and can handle up to 50V. Ideal for applications requiring precise resistance adjustments in compact SMT designs.
3005P-1-502
The Bourns 3005P-1-502 is a linear wire wound variable resistor with 20 turns and a resistance of 5000 ohm. It has a rated power dissipation of 1W and can operate in temperatures ranging from -65 to 125 °C. This trimmer resistor is commonly used in PCB mount applications requiring precise resistance adjustments.
T93XA103KT20
Vishay Intertechnology's T93XA103KT20 is a CERMET trimmer resistor with 10000 ohm resistance, 21 turns, and linear resistance law. It operates b/w -55 to 125 °C and has a tolerance of 10%. Ideal for PCB mounting applications requiring precise voltage adjustments in electronic circuits.
3296W-1-504LF
Bourns 3296W-1-504LF is a CERMET variable resistor with 25 turns, 500000 ohm resistance, and linear law. Ideal for applications requiring precise resistance adjustments in circuits with operating voltage up to 300 V. Features multi-turn construction, through-hole mounting, and a rated power dissipation of 0.5 W.
93PR50KLF
Tt Electronics Plc
93PR50KLF by Tt Electronics Plc is a CERMET variable resistor with 50000 ohm resistance, suitable for PCB mounting. It features a linear law of resistance, thumb wheel actuator type, and can operate b/w -55 to 125 °C temperatures. Ideal for applications requiring precise voltage adjustments in electronic circuits.
53C350
Honeywell Sensing And Control
The Honeywell Sensing And Control 53C350 is a circular package potentiometer with a linear resistance of 50 ohm. It has a max operating temperature of 120°C and is suitable for panel mounting applications.
3386F-1-102TLF
Bourns 3386F-1-102TLF is a CERMET trimmer resistor with 1000 ohm resistance, 10% tolerance, and 0.5 W power dissipation. Ideal for PCB mounting applications, it operates b/w -55 to 125 °C with linear resistance law and 280° rotation angle.
PT10LV10-103A2020-S
Amphenol
Amphenol's PT10LV10-103A2020-S is a 10000 ohm linear carbon potentiometer with 3 terminals. It has a tolerance of 20%, operates at voltages up to 200V, and can handle temperatures from -25 to 70 °C. Ideal for PCB mounting applications requiring precise resistance adjustments in compact spaces.
3296Y-1-103LF
Bourns 3296Y-1-103LF is a 10000 ohm, 25-turn linear cermet trimmer resistor with 10% tolerance. Operating voltage of 300V and rated power dissipation of 0.5W. Ideal for precision circuit adjustments in electronic devices due to its multi-turn construction and vertical actuator orientation.
PTL60-10O0-103B2
Bourns PTL60-10O0-103B2 is a linear carbon potentiometer with 10000 ohm resistance, 20% tolerance, and 0.1 W power dissipation. It features a slide actuator in a rectangular package for PCB mount applications. Operating temperature range from -10 to 55 °C makes it suitable for various electronic devices.
3299Y-1-201
The Bourns 3299Y-1-201 is a CERMET trimmer pot with 200 ohm resistance, 25 turns, and linear resistance law. It is used in PCB mount applications for adjusting voltage with a max operating temperature of 125°C.
3296P-1-502LF
Bourns 3296P-1-502LF is a 5000 ohm CERMET trimmer resistor with linear resistance law, 25 turns, and 10% tolerance. Ideal for applications requiring precise resistance adjustments in circuits with operating voltage up to 300V. Suitable for through-hole mounting with a max temperature of 125°C.
51CAD-E24-A15L
The Bourns 51CAD-E24-A15L is a linear potentiometer with 10000 ohm resistance, 10% tolerance, and 1W power dissipation. It has a temperature coefficient of 150 ppm/°C and operates b/w -40 to +125 °C. Ideal for PCB mounting applications requiring precise resistance adjustments in a compact rectangular package.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
PTA6044-2015DPA103
POTENTIOMETER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 10000 ohm; Rated Power Dissipation (P): .06 W; Maximum Operating Temperature: 50 Cel; Tolerance: 20 %;
PTA6043-2010CIB103
POTENTIOMETER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 10000 ohm; Rated Power Dissipation (P): .25 W; Maximum Operating Temperature: 50 Cel; Tolerance: 20 %;
PTA6043-2015CPB103
PTA6043-2215DPB103
PTA6044-2015DPB103
Bourns PTA6044-2015DPB103 is a 10000 ohm linear potentiometer with 6 terminals, rated at 0.125 W power dissipation. It has a vertical actuator and slide type, suitable for PCB mounting applications. Operating voltage of 200 V, temperature range from -10 to 50 °C.
PTA6043-2015DPA103
POTENTIOMETER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 10000 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 50 Cel; Tolerance: 20 %;
PTA6043-2015DPB502
POTENTIOMETER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 5000 ohm; Rated Power Dissipation (P): .25 W; Maximum Operating Temperature: 50 Cel; Tolerance: 20 %;
PTA6043-2015DPA102
POTENTIOMETER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 1000 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 50 Cel; Tolerance: 20 %;
PTA6043-2015DPA104
POTENTIOMETER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 100000 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 50 Cel; Tolerance: 20 %;
PTA6043-2015DPA105
POTENTIOMETER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 1000000 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 50 Cel; Tolerance: 20 %;
PTA6043-2015DPA202
POTENTIOMETER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 2000 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 50 Cel; Tolerance: 20 %;
PTA6043-2015DPA203
POTENTIOMETER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 20000 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 50 Cel; Tolerance: 20 %;
PTA6043-2015DPA204
POTENTIOMETER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 200000 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 50 Cel; Tolerance: 20 %;
PTA6043-2015DPA503
POTENTIOMETER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 50000 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 50 Cel; Tolerance: 20 %;
PTA6043-2015DPA504
POTENTIOMETER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 500000 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 50 Cel; Tolerance: 20 %;
PTA6043-2015DPB102
POTENTIOMETER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 1000 ohm; Rated Power Dissipation (P): .25 W; Maximum Operating Temperature: 50 Cel; Tolerance: 20 %;
PTA6043-2015DPB104
POTENTIOMETER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 100000 ohm; Rated Power Dissipation (P): .25 W; Maximum Operating Temperature: 50 Cel; Tolerance: 20 %;
PTA6043-2015DPB105
POTENTIOMETER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 1000000 ohm; Rated Power Dissipation (P): .25 W; Maximum Operating Temperature: 50 Cel; Tolerance: 20 %;
PTA6043-2015DPB203
POTENTIOMETER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 20000 ohm; Rated Power Dissipation (P): .25 W; Maximum Operating Temperature: 50 Cel; Tolerance: 20 %;
PTA6043-2015DPB504
POTENTIOMETER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 500000 ohm; Rated Power Dissipation (P): .25 W; Maximum Operating Temperature: 50 Cel; Tolerance: 20 %;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved