Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Murata Manufacturing's NCU18XH103D60RB is a Non-linear Resistor with 10000 ohm resistance, operating voltage of 5V, and thermal sensitivity index of 3380K. It is used for temperature sensing applications with a max operating temperature of 125°C and min of -40°C. The thermistor has dual-ended terminals in SMT package style suitable for surface mounting method.
Median Price
$0.271
Lifecycle Status
Suppliers In-Stock
13
In-Stock Inventory
1k+
Arrow
1+ parts
$0.290
100+ parts
$0.253
1k+ parts
$0.207
10k+ parts
$0.187
Mouser Electronics
$0.360
$0.286
$0.219
$0.203
DigiKey
$0.410
$0.245
-
Farnell
$0.233
$0.177
$0.144
Element14
$0.320
$0.222
$0.209
TTI
Future Electronics
$0.198
Newark
$0.285
$0.249
Verical
Chip1Stop
$0.257
Nova Conductors
$0.145
TME
$0.240
$0.095
Vyrian
Argo Parts USA
$0.141
Bastille Electronics
$0.138
$0.131
$0.129
Andel Nordic
$8.594
$8.250
Authorized Procurement Solutions
Continental Prestige Electronics
$0.171
$0.125
$0.096
This thermistor is specifically designed for temperature sensing applications, ensuring accurate and reliable temperature measurements.
The dual-ended terminal placement allows for easy and flexible connection options, making installation and integration simpler.
The packing method ensures safe transportation and storage of the thermistors, preventing any damage during handling.
With a resistance of 10000 ohm, this thermistor offers a stable and consistent electrical characteristic, ideal for temperature sensing applications.
The surface mount package style enables easy and secure integration onto circuit boards, saving space and improving overall efficiency.
The high maximum operating temperature of 125°C ensures reliable performance in a wide range of temperature environments.
The high thermal sensitivity index of 3380 K allows for accurate and precise temperature measurements, essential for temperature sensing applications.
The low operating voltage of 5 V ensures energy efficiency and compatibility with a wide range of electronic systems.
With a low tolerance of 0.5%, this thermistor offers high precision and accuracy in temperature sensing applications.
The surface mounting type simplifies installation and improves reliability, making it a convenient choice for various applications.
Compliance with CUL and UL standards ensures high quality, safety, and reliability of the thermistors, meeting industry regulations and requirements.
Non-linear Resistors NCU18XH103D60RB attributes and parameters. Explore more Non-linear Resistors devices from Murata Manufacturing
Mounting Type:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Height (Package):
Length (Package):
Package Style (Meter):
Width (Package):
Packing Method:
Reference Standard:
Resistance:
Resistor Type:
Terminal Placement:
Terminal Shape:
Thermal Sensitivity Index:
Thermistor Application:
Tolerance:
Operating Voltage:
NCU18XH103D60RB Resistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8533.40.80.70
SB
8533.40.00.80
Murata Manufacturing Co., Ltd. is a Japanese electronics manufacturer founded in 1944 by Akira Murata. Through its expansive supply chain network and innovative product portfolio, Murata designs and manufactures a wide variety of electronic components including capacitors, inductor coils, buzzers, sensors and more for applications in the automotive, medical, industrial and consumer sectors. Based in Nagaokakyo City in Kyoto Prefecture of Japan, Murata operates factories around the world with other facilities located throughout Asia Pacific region such as China and Thailand; North America; Europe; Latin America; Middle East & Africa; as well as Oceania.
Chairman of the Board
Tsuneo Murata
President
Norio Nakajima
Senior Executive VP, Board Member
Hiroshi Iwatsubo
Murata Integrated Passive Solution
Fabrication
Fab Initiation
1989
France
Caen
Wafer Capacity
12,500
Sendai Fab
2008
Japan
Sendai
20,000
Kanazawa - Fab 2
2016
Hakusan
10,000
Komoro
1980
Yasu Plant
1987
Yasu
14,500
Kanazawa Plant
1985
5,000
Vantaa - Fab 1
1998
Finland
Vantaa
Vantaa - Fab 2
2006
12,000
NE555D
STMicroelectronics
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
SMBJ18CA
Sensitron Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
NE555DR
Texas Instruments
NE555DR by Texas Instruments is an Analog Waveform Generation IC with 8 terminals, operating voltage of 5V, and power supplies ranging from 5-15V. It is a versatile component for pulse generation applications due to its small outline package and commercial temperature grade suitability.
1N4148
New Jersey Semiconductor Products
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
2N7002DWH6327XTSA1
Infineon Technologies
2N7002DWH6327XTSA1 by Infineon: N-CHANNEL FET with 60V DS Breakdown Voltage, 0.3A ID, and 3ohm RDS. Ideal for SWITCHING applications in small outline packages with GULL WING terminals.
LD1117S33TR
LD1117S33TR by STMicroelectronics is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 1.3A. It has a small outline package style, operates at an adjustable temperature range from 0 to 125°C, and is ideal for applications requiring stable voltage regulation in compact electronic devices.
LL4148
Secos
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
M39029/58-360
TE Connectivity
TE Connectivity's M39029/58-360 is a CRIMP terminal backshell for 22-28 AWG wires, rated at 5A. Ideal for male contacts in Mil-Spec applications, it offers a cross-section area of 0.34 mm2 and ensures secure connections in demanding environments.
2N7002
Bytesonic Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Terminal Position: DUAL; Minimum Operating Temperature: -55 Cel;
LM317T
Onsemi
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; JESD-30 Code: R-PSFM-T3; Adjustability: ADJUSTABLE; Package Equivalence Code: SIP3,.1TB;
BAV99
Electronic Devices
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Promax-johnton
Hitano Enterprise
Vishay Sprague
BSS138LT3G
BSS138LT3G by Onsemi is a N-CHANNEL FET with a min DS breakdown voltage of 50V. It is used for switching applications and has a max drain current of 0.2A and max drain-source on resistance of 3.5 ohm.
CL10B104KB8NNNC
Samsung Electro-mechanics
CL10B104KB8NNNC by Samsung Electro-mechanics is a ceramic capacitor with capacitance of 0.1uF and rated DC voltage of 50V. It has a negative tolerance of 10% and temperature coefficient of 15ppm/°C, suitable for surface mount applications in various electronic devices. With dimensions of 1.6mm x 0.8mm x 0.9mm, it operates b/w -55 to 125 °C providing stable performance in compact designs.
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Operating Temperature: 200 Cel; Config: SINGLE; Terminal Finish: Tin/Lead (Sn/Pb);
2N2222A
Diotec Semiconductor Ag
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .6 A; Maximum Time At Peak Reflow Temperature (s): 10;
Eic Semiconductor
Rectron
B72210-S271-K101
TDK
TDK's B72210-S271-K101 varistor has a max energy capacity of 43J, operating voltage of 350V, and max circuit RMS voltage of 275V. Ideal for surge protection in applications requiring non-linear resistors with radial terminal placement and disk package shape.
MOV-10D471KTR
Bourns
MOV-10D471KTR by Bourns is a VARISTOR with 70J energy capacity, 385V operating voltage, and -40 to 105°C temperature range. Ideal for surge protection in various applications due to its METAL OXIDE FILM technology and THROUGH HOLE MOUNT design.
ERZE14A681
Panasonic
Panasonic ERZE14A681 is a VARISTOR with 382J energy capacity, 420V RMS voltage, and 560V operating voltage. Ideal for surge protection in applications requiring high energy absorption like power supplies and industrial equipment due to its radial terminal placement and bulk packing method.
MF-R050-2-17
The Bourns MF-R050-2-17 is a PTC resettable fuse with resistance of 0.41 ohm, operating voltage of 60V, and max temp of 85°C. It's used for overcurrent protection in applications requiring radial terminal placement and matte tin finish. Ideal for CUL, TUV, UL reference standards.
MF-R1100
Bourns MF-R1100 is a PTC resettable fuse with 16V operating voltage, ideal for overcurrent protection. Featuring radial terminal placement and tin finish, it has a temperature range of -40 to 85°C. With through-hole mounting, this non-linear resistor is compact at 24.2mm x 3mm x 32.9mm for various applications.
NTCS0805E3103GMT
Vishay Bc Components
NTC THERMISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10000 ohm; Rated Power Dissipation (P): .21 W; Maximum Operating Temperature: 150 Cel; Tolerance: 2 %;
TRF250-145U
TE Connectivity's TRF250-145U is a PTC resettable fuse with 2 terminals, rated for 60V AC voltage. Its disk package measures 6mm x 3.8mm x 10mm and operates b/w -40°C to 85°C. Ideal for temperature sensing applications with radial terminal placement.
RF2487-000
TE Connectivity's RF2487-000 is a PTC resettable fuse with 0.11 ohm resistance, suitable for overcurrent protection applications. Featuring dual-ended terminals and SMT package style, it operates at -40 to 85°C with a max voltage of 33V. Compliant with CSA, TUV, and UL standards, this surface-mount device measures 4.83mm x 3.41mm x 1.46mm.
MOV-10D561K
The Bourns MOV-10D561K is a VARISTOR with 70J energy capacity, 350V RMS voltage, and 460V DC operating voltage. It is used for surge protection in circuits with radial terminal placement and metal oxide film technology. Ideal for applications requiring high energy absorption and UL compliance.
TFPT0603L2200FV
Vishay Intertechnology
Vishay Intertechnology's TFPT0603L2200FV is a PTC thermistor with 220 ohm resistance, 1% tolerance, and 0.075 W power dissipation. It is used for temperature sensing applications with a rated temperature range of -55 to 125 °C. The dual-ended rectangular package has wraparound terminals and surface mounting type.
ERTJ1VS104FA
Panasonic ERTJ1VS104FA is a NTC thermistor with 100000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. It is used for temperature compensation in applications requiring thermal sensitivity index of 4390 K. The dual-ended rectangular package with SMT style and wraparound terminals makes it suitable for surface mounting method.
NTCS0603E3473FHT
NTC THERMISTOR; Mounting Type: SURFACE MOUNT; Resistance: 47000 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 150 Cel; Tolerance: 1 %;
V250LA20AP
Littelfuse
V250LA20AP by Littelfuse is a VARISTOR with 250V URac and 330V operating voltage. It has a max energy absorption of 72J, ideal for TEMPERATURE COMPENSATION applications. With radial terminal placement and metal oxide film technology, it operates b/w -55°C to 125°C effectively.
NTC0805J220R
TE Connectivity's NTC0805J220R is a 220 ohm NTC thermistor with 5% tolerance and 0.125 W power dissipation. It is used for temperature sensing applications, featuring dual-ended terminals in a rectangular package. Ideal for surface mounting, it measures 2mm x 1.25mm x 0.5mm.
NANOSMDC075F-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .09 ohm; Maximum Operating Temperature: 85 Cel; Minimum Operating Temperature: -40 Cel; Package Style (Meter): SMT;
ERTJ0ES104F
Panasonic ERTJ0ES104F is a NTC thermistor with 100000 ohm resistance, 1% tolerance, and 125°C max operating temp. Ideal for temperature compensation in various applications due to its SMT package style and thermal sensitivity index of 4390 K. Dual-ended terminals make it suitable for surface mounting methods.
1812L150/24MR
1812L150/24MR by Littelfuse is a PTC resettable fuse with resistance of 0.04 ohm. It features dual-ended terminals in a rectangular SMT package. Primarily used for overcurrent protection, it has a temperature range from -40 to 85 °C and meets CUL, TUV, and UL standards.
MICROSMD150F-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .04 ohm; Maximum Operating Temperature: 85 Cel; Width (Package): 2.8 mm; Shape (Package): RECTANGULAR PACKAGE;
NTCS0603E3103FLT
NTC THERMISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10000 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 150 Cel; Tolerance: 1 %;
ERTJ1VG103JA
Panasonic ERTJ1VG103JA is a 10000 ohm NTC thermistor with 5% tolerance. It has a thermal sensitivity index of 3435 K and operates b/w -40 to 125 °C. Ideal for temperature compensation applications due to its dual-ended terminal placement in a rectangular SMT package.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
NCU18XH103F6SRB
Murata Manufacturing
Murata Manufacturing's NCU18XH103F6SRB is a Non-linear Resistor with 10000 ohm resistance, -40 to 150 °C operating temperature range, and 1% tolerance. It is used for TEMPERATURE SENSING applications with DUAL ENDED terminals in a RECTANGULAR PACKAGE. The NTC THERMISTOR has WRAPAROUND terminals, operates at 5V voltage, and complies with AEC-Q200 standard.
NCU18XH103F60RB
Murata Manufacturing's NCU18XH103F60RB is a 10000 ohm NTC thermistor with 1% tolerance. It operates at -40 to 125 °C, suitable for temperature sensing applications. With dual-ended terminals and SMT package style, it offers high thermal sensitivity index of 3380 K.
NCU15XH103F6SRC
Murata Manufacturing's NCU15XH103F6SRC is a 10000 ohm NTC thermistor with dual-ended terminals for temperature sensing applications. It has a thermal sensitivity index of 3380 K and operates b/w -40 to 150 °C, suitable for surface mounting with a tolerance of 1%.
NCU15XH103F60RC
Murata Manufacturing's NCU15XH103F60RC is a 10000 ohm NTC thermistor with dual-ended terminals for temperature sensing applications. It has a thermal sensitivity index of 3380 K and operates b/w -40 to 125 °C, with a tolerance of 1%. Ideal for surface mounting, it comes in an SMT package style measuring 0.5mm in height, length, and width.
NCU18XH103J6SRB
NTC THERMISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10000 ohm; Maximum Operating Temperature: 150 Cel; Tolerance: 5 %; Shape (Package): RECTANGULAR PACKAGE;
NCU18WB473F6SRB
NTC THERMISTOR; Mounting Type: SURFACE MOUNT; Resistance: 47000 ohm; Maximum Operating Temperature: 150 Cel; Tolerance: 1 %; Height (Package): .8 mm;
NCU18WB473F60RB
NTC THERMISTOR; Mounting Type: SURFACE MOUNT; Resistance: 47000 ohm; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %; Packing Method: TR, PAPER, 7 INCH;
NCU18XH103E6SRB
Murata Manufacturing's NCU18XH103E6SRB is a Non-linear Resistor with 10000 ohm resistance, -40 to 150 °C operating temperature range, and 3% tolerance. It is used for TEMPERATURE SENSING applications with DUAL ENDED terminals in a RECTANGULAR PACKAGE. The NTC THERMISTOR has WRAPAROUND terminals, operates at 5V voltage, and complies with AEC-Q200 standard.
NCU18WF104F6SRB
NTC THERMISTOR; Mounting Type: SURFACE MOUNT; Resistance: 100000 ohm; Maximum Operating Temperature: 150 Cel; Tolerance: 1 %; No. of Terminals: 2;
NCU15XH103D6SRC
NTC THERMISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10000 ohm; Maximum Operating Temperature: 150 Cel; Tolerance: .5 %; Length (Package): 1 mm;
NCU18XH103D6SRB
NTC THERMISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10000 ohm; Maximum Operating Temperature: 150 Cel; Tolerance: .5 %; Packing Method: TR, PAPER, 7 INCH;
NCU18WF104J60RB
NTC THERMISTOR; Mounting Type: SURFACE MOUNT; Resistance: 100000 ohm; Maximum Operating Temperature: 125 Cel; Tolerance: 5 %; Minimum Operating Temperature: -40 Cel;
NCU15WF104D60RC
NTC THERMISTOR; Mounting Type: SURFACE MOUNT; Resistance: 100000 ohm; Maximum Operating Temperature: 125 Cel; Tolerance: .5 %; Package Style (Meter): SMT;
NCU15WF104F60RC
NTC THERMISTOR; Mounting Type: SURFACE MOUNT; Resistance: 100000 ohm; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %; No. of Terminals: 2;
NCU15WF104F6SRC
Murata Manufacturing's NCU15WF104F6SRC is a Non-linear Resistor with 100k ohm resistance, 1% tolerance, and 5V operating voltage. It is an NTC Thermistor for temperature sensing applications, featuring dual-ended terminals and surface mounting type. With a thermal sensitivity index of 4250K, it operates b/w -40°C to 150°C efficiently.
NCU18WB473J6SRB
NTC THERMISTOR; Mounting Type: SURFACE MOUNT; Resistance: 47000 ohm; Maximum Operating Temperature: 150 Cel; Tolerance: 5 %; Packing Method: TR, PAPER, 7 INCH;
NCU15XH103J6SRC
NTC THERMISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10000 ohm; Maximum Operating Temperature: 150 Cel; Tolerance: 5 %; Width (Package): .5 mm;
NCU18WF104F60RB
NTC THERMISTOR; Mounting Type: SURFACE MOUNT; Resistance: 100000 ohm; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %; Height (Package): .8 mm;
NCU18XH103J60RB
NTC THERMISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10000 ohm; Maximum Operating Temperature: 125 Cel; Tolerance: 5 %; Package Style (Meter): SMT;
NCU18XH103E60RB
NTC THERMISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10000 ohm; Maximum Operating Temperature: 125 Cel; Tolerance: 3 %; Length (Package): 1.6 mm;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved