Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Murata Manufacturing's NCU18WB473F6SRB is a Non-linear Resistor with 47000 ohm resistance, NTC Thermistor type, and 1% tolerance. It is used for TEMPERATURE SENSING applications with dual-ended terminals and surface mount package style. Operating voltage of 5V, operating temperature range from -40 to 150 °C, and AEC-Q200 reference standard make it ideal for various electronic devices.
Median Price
$0.160
Lifecycle Status
Suppliers In-Stock
11
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
100+ parts
$0.121
1k+ parts
$0.092
10k+ parts
$0.083
DigiKey
$0.180
$0.102
-
Arrow
$0.285
$0.166
$0.111
$0.089
Future Electronics
$0.073
Verical
$0.105
$0.104
Nova Conductors
$0.126
Maritex
$0.141
IBS Electronics
NAC Semi
$0.107
Vyrian
Sensible Micro Corp
Advanced Electronics
$0.042
$0.038
$0.034
Modulus Dynamics
$0.125
Corohmni
Argo Parts USA
$0.122
Netroflash
$0.119
$0.117
Aztec Data Supply Inc.
$0.130
Semicontronic
$0.137
AZTECH Wire
$20.060
This thermistor is specifically designed for temperature sensing applications, ensuring accurate and reliable temperature measurements.
With a resistance of 47000 ohm, this thermistor can provide precise temperature readings within a specific range.
The low operating voltage of 5 V makes this thermistor suitable for a variety of low-power temperature sensing applications.
The tight tolerance of 1% ensures that the temperature readings provided by this thermistor are highly accurate and consistent.
The SMT package style allows for easy surface mounting, making the installation process convenient and efficient.
Non-linear Resistors NCU18WB473F6SRB attributes and parameters. Explore more Non-linear Resistors devices from Murata Manufacturing
Mounting Type:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Height (Package):
Length (Package):
Package Style (Meter):
Width (Package):
Packing Method:
Reference Standard:
Resistance:
Resistor Type:
Terminal Placement:
Terminal Shape:
Thermal Sensitivity Index:
Thermistor Application:
Tolerance:
Operating Voltage:
NCU18WB473F6SRB Resistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8533.40.80.70
SB
8533.40.00.80
Murata Manufacturing Co., Ltd. is a Japanese electronics manufacturer founded in 1944 by Akira Murata. Through its expansive supply chain network and innovative product portfolio, Murata designs and manufactures a wide variety of electronic components including capacitors, inductor coils, buzzers, sensors and more for applications in the automotive, medical, industrial and consumer sectors. Based in Nagaokakyo City in Kyoto Prefecture of Japan, Murata operates factories around the world with other facilities located throughout Asia Pacific region such as China and Thailand; North America; Europe; Latin America; Middle East & Africa; as well as Oceania.
Chairman of the Board
Tsuneo Murata
President
Norio Nakajima
Senior Executive VP, Board Member
Hiroshi Iwatsubo
Murata Integrated Passive Solution
Fabrication
Fab Initiation
1989
France
Caen
Wafer Capacity
12,500
Sendai Fab
2008
Japan
Sendai
20,000
Kanazawa - Fab 2
2016
Hakusan
10,000
Komoro
1980
Yasu Plant
1987
Yasu
14,500
Kanazawa Plant
1985
5,000
Vantaa - Fab 1
1998
Finland
Vantaa
Vantaa - Fab 2
2006
12,000
M24308/2-1F
Cinch Connectivity Solutions
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1750VAC; No. of Connectors: ONE; Body Depth: .375 inch;
C0603X104K5RACAUTO
KEMET Corporation
C0603X104K5RACAUTO by KEMET Corp is a ceramic capacitor with capacitance of 0.1 uF and rated DC voltage of 50 V. It has a temperature coefficient of 15% and can operate b/w -55 to 125 °C. This SMT package is commonly used in automotive applications due to its AEC-Q200 reference standard.
LL4148-GS08
Vishay Intertechnology
The Vishay Intertechnology LL4148-GS08 is a glass diode with fast recovery time of 0.008 us and max reverse current of 5 uA. Ideal for applications requiring rectification, it has a breakdown voltage of 100 V and can handle a peak forward current of 2 A.
M39029/58-360
Amphenol
CONNECTOR ACCESSORY; MIL Conformity: YES; Associated Military - Specifications: MIL-DTL-38999; Contact Gender: MALE; Terminal Type: CRIMP; IEC Conformity: NO;
LM555CM
Texas Instruments
LM555CM by Texas Instruments is an Analog Waveform Generation IC with a supply voltage range of 4.5V to 16V and max operating temperature of 70°C. It comes in a small outline package, suitable for applications requiring pulse generation or rectangular waveform outputs. With surface mount capability and low supply current of 15mA, it is ideal for commercial-grade electronic circuits.
FDV304P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Moisture Sensitivity Level (MSL): 1; Maximum Drain Current (ID): .46 A;
FDC5614P
MSKSEMI SEMICONDUCTOR
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 2 W; Transistor Element Material: SILICON; Minimum DS Breakdown Voltage: 60 V;
2N7002DWH6327XTSA1
Infineon Technologies
2N7002DWH6327XTSA1 by Infineon: N-CHANNEL FET with 60V DS Breakdown Voltage, 0.3A ID, and 3ohm RDS. Ideal for SWITCHING applications in small outline packages with GULL WING terminals.
1N4148
Surge Components
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
1N4148W-7-F
Multicomp Pro
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SS14
Microsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ERJ3EKF1002V
Panasonic
Panasonic's ERJ3EKF1002V is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. It operates b/w -55 to 155 °C and is ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance.
Sun Wai Electronic
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Reverse Recovery Time: .004 us; Maximum Repetitive Peak Reverse Voltage: 100 V;
LM317AEMP/NOPB
LM317AEMP/NOPB by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and a max output current of 1.5A. It operates in temperatures ranging from -40°C to 125°C, making it suitable for various applications requiring precise voltage regulation in a compact package.
2N2222A
Cobham Plc
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Minimum DC Current Gain (hFE): 100; Maximum Turn Off Time (toff): 300 ns;
2N7002
Diotec Semiconductor Ag
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Time At Peak Reflow Temperature (s): 10; Terminal Finish: MATTE TIN;
Crystalonics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
BSS138
Vishay Intertechnology's BSS138 is a N-CHANNEL FET with SINGLE configuration and ENHANCEMENT MODE operation. It features 0.35W power dissipation, METAL-OXIDE SEMICONDUCTOR tech, and 150°C max temp. Ideal for surface mount applications in various electronic circuits requiring efficient power management.
SMBJ18CA
Good-ark Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Maximum Time At Peak Reflow Temperature (s): 10; JESD-609 Code: e3;
Yangzhou Yangjie Electronics
NTCS0603E3103GMT
Vishay Intertechnology's NTCS0603E3103GMT is a NTC thermistor with 10000 ohm resistance, 2% tolerance, and 150°C max operating temp. Ideal for temperature sensing applications due to its thermal sensitivity index of 3610 K and surface mount package style.
MINIASMDC014F-2
Littelfuse
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: 1.5 ohm; Maximum Operating Temperature: 85 Cel; Height (Package): .89 mm; Terminal Shape: WRAPAROUND;
USP10975
Littelfuse USP10975 NTC Thermistor has 10000 ohm resistance with 1% tolerance. It is a chassis mount device with flexible wire terminals, operating b/w -55 to 125 °C. Ideal for temperature sensing applications due to its high thermal sensitivity index of 3892 K.
MINISMDC075F/24-02
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Rated Power Dissipation (P): .8 W; Maximum Operating Temperature: 85 Cel; Thermistor Application: TEMPERATURE SENSING; Packing Method: TR, EMBOSSED, 7 INCH;
NTCALUG01T103G501
Vishay Intertechnology's NTCALUG01T103G501 is a 10000 ohm NTC thermistor with 2 terminals, radial placement, and chassis mount package. It has a thermal sensitivity index of 3984 K and operates b/w -40 to 150 °C. Ideal for temperature sensing applications, meeting AEC-Q200, CUL, and UL standards.
V18AUMLA2220H
V18AUMLA2220H by Littelfuse is a VARISTOR with 18V operating voltage and 25J energy capacity. It has a metal oxide film technology, dual-ended terminals, and operates b/w -40°C to 150°C. Ideal for surge protection in automotive electronics due to AEC-Q200 compliance.
NB20N50104JBA
KYOCERA AVX
NB20N50104JBA by KYOCERA AVX is a NTC thermistor with 100000 ohm resistance, 5% tolerance, and 0.24 W power dissipation. It is used for temperature compensation in various applications due to its thermal sensitivity index of 4160 K and operating temperature range from -55 to 150 °C. The dual-ended terminal placement and SMT package style make it suitable for surface mount installations.
NTC0805J100K
TE Connectivity
TE Connectivity's NTC0805J100K is a 100k ohm NTC thermistor with 5% tolerance. It operates b/w -55°C to 125°C, making it ideal for temperature sensing applications. With a thermal sensitivity index of 4100 K, this surface mount thermistor offers accurate and reliable performance in compact devices.
B59607A0120A062
TDK
TDK B59607A0120A062 is a PTC thermistor with 30 ohm resistance, rated for 30V AC/DC. It offers overcurrent protection in SMT applications, with dual-ended terminals and wraparound shape. Operating from -40 to 125°C, it meets AEC-Q200 and UL standards for automotive and industrial use.
SG200
Rhopoint Components
NTC THERMISTOR; Mounting Type: THROUGH HOLE MOUNT; Resistance: 5 ohm; Tolerance: 15 %; Terminal Shape: WIRE; Height (Package): 15.24 mm;
CG0402MLU-12G
Bourns
The Bourns CG0402MLU-12G is a varistor with 12V operating voltage, -40 to 125°C temp range. It has dual-ended terminals, metal oxide film tech, and SMT package style. Ideal for surge protection in electronic circuits due to its compact size and high reliability.
TRF250-180
TE Connectivity's TRF250-180 is a PTC resettable fuse with 4 ohm resistance and rated power dissipation of 1.5W. Ideal for temperature sensing applications, it has radial terminal placement in a disk package, dimensions of 9mm x 3.8mm x 12mm, and operates b/w -40°C to 85°C.
1206L150THWR
1206L150THWR by Littelfuse is a PTC resettable fuse with resistance of 0.04 ohm, operating voltage of 8V, and max temp of 85°C. It is used for overcurrent protection in various applications due to its dual-ended terminal placement and SMT package style. The thermistor has a compact size (3.4mm x 1.8mm x 1mm) and meets standards like CUL, TUV, and UL.
Harris Semiconductor
VARISTOR; Mounting Type: SURFACE MOUNT; Maximum Operating Temperature: 150 Cel; Minimum Operating Temperature: -40 Cel; Shape (Package): RECTANGULAR PACKAGE; Operating Voltage: 18 V;
B72220P3461K101
The TDK B72220P3461K101 is a VARISTOR with 445J energy capacity, 615V operating voltage, and 460V max RMS voltage. Ideal for surge protection in circuits exposed to transient overvoltage events. Suitable for applications requiring high reliability in harsh environments due to its metal oxide film technology and radial terminal placement.
V275LA20A
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Rated Power Dissipation (P): .6 W; Maximum Operating Temperature: 85 Cel; Operating Voltage: 369 V; Technology: METAL OXIDE FILM;
2920L500/16MR-A
Littelfuse 2920L500/16MR-A is a PTC thermistor with resistance of 0.005 ohm, operating voltage of 16V, and dual-ended terminals. It is used for overcurrent protection in surface mount applications with a temperature range from -40 to 85°C.
MF-MSMF020-2
The Bourns MF-MSMF020-2 is a PTC resettable fuse with a resistance of 0.4 ohm and an operating voltage of 30V. It is commonly used for overcurrent protection in various applications, featuring dual-ended terminal placement and surface mount mounting type.
NTCS0805E3103JMT
Vishay Intertechnology's NTCS0805E3103JMT is a NTC thermistor with 10000 ohm resistance, -40 to 150 °C operating range, and 5% tolerance. It is used for temperature sensing applications in automotive electronics due to its high thermal sensitivity index of 3570 K. The thermistor comes in a rectangular SMT package with dual-ended terminals and wraparound shape.
RXEF050-AP
PTC RESETTABLE FUSE; Mounting Type: THROUGH HOLE MOUNT; Maximum Operating Temperature: 85 Cel; Rated AC Voltage (URac): 72 V; Terminal Placement: RADIAL; Additional Features: 0.5-0.77 OHMS AT 20 DEG CEL;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
NCU18XH103F6SRB
Murata Manufacturing
Murata Manufacturing's NCU18XH103F6SRB is a Non-linear Resistor with 10000 ohm resistance, -40 to 150 °C operating temperature range, and 1% tolerance. It is used for TEMPERATURE SENSING applications with DUAL ENDED terminals in a RECTANGULAR PACKAGE. The NTC THERMISTOR has WRAPAROUND terminals, operates at 5V voltage, and complies with AEC-Q200 standard.
NCU18XH103F60RB
Murata Manufacturing's NCU18XH103F60RB is a 10000 ohm NTC thermistor with 1% tolerance. It operates at -40 to 125 °C, suitable for temperature sensing applications. With dual-ended terminals and SMT package style, it offers high thermal sensitivity index of 3380 K.
NCU15XH103F6SRC
Murata Manufacturing's NCU15XH103F6SRC is a 10000 ohm NTC thermistor with dual-ended terminals for temperature sensing applications. It has a thermal sensitivity index of 3380 K and operates b/w -40 to 150 °C, suitable for surface mounting with a tolerance of 1%.
NCU15XH103F60RC
Murata Manufacturing's NCU15XH103F60RC is a 10000 ohm NTC thermistor with dual-ended terminals for temperature sensing applications. It has a thermal sensitivity index of 3380 K and operates b/w -40 to 125 °C, with a tolerance of 1%. Ideal for surface mounting, it comes in an SMT package style measuring 0.5mm in height, length, and width.
NCU18XH103J6SRB
NTC THERMISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10000 ohm; Maximum Operating Temperature: 150 Cel; Tolerance: 5 %; Shape (Package): RECTANGULAR PACKAGE;
NCU18XH103D60RB
NTC THERMISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10000 ohm; Maximum Operating Temperature: 125 Cel; Tolerance: .5 %; No. of Terminals: 2;
NCU18WB473F60RB
NTC THERMISTOR; Mounting Type: SURFACE MOUNT; Resistance: 47000 ohm; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %; Packing Method: TR, PAPER, 7 INCH;
NCU18XH103E6SRB
Murata Manufacturing's NCU18XH103E6SRB is a Non-linear Resistor with 10000 ohm resistance, -40 to 150 °C operating temperature range, and 3% tolerance. It is used for TEMPERATURE SENSING applications with DUAL ENDED terminals in a RECTANGULAR PACKAGE. The NTC THERMISTOR has WRAPAROUND terminals, operates at 5V voltage, and complies with AEC-Q200 standard.
NCU18WF104F6SRB
NTC THERMISTOR; Mounting Type: SURFACE MOUNT; Resistance: 100000 ohm; Maximum Operating Temperature: 150 Cel; Tolerance: 1 %; No. of Terminals: 2;
NCU15XH103D6SRC
NTC THERMISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10000 ohm; Maximum Operating Temperature: 150 Cel; Tolerance: .5 %; Length (Package): 1 mm;
NCU18XH103D6SRB
NTC THERMISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10000 ohm; Maximum Operating Temperature: 150 Cel; Tolerance: .5 %; Packing Method: TR, PAPER, 7 INCH;
NCU18WF104J60RB
NTC THERMISTOR; Mounting Type: SURFACE MOUNT; Resistance: 100000 ohm; Maximum Operating Temperature: 125 Cel; Tolerance: 5 %; Minimum Operating Temperature: -40 Cel;
NCU15WF104D60RC
NTC THERMISTOR; Mounting Type: SURFACE MOUNT; Resistance: 100000 ohm; Maximum Operating Temperature: 125 Cel; Tolerance: .5 %; Package Style (Meter): SMT;
NCU15WF104F60RC
NTC THERMISTOR; Mounting Type: SURFACE MOUNT; Resistance: 100000 ohm; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %; No. of Terminals: 2;
NCU15WF104F6SRC
Murata Manufacturing's NCU15WF104F6SRC is a Non-linear Resistor with 100k ohm resistance, 1% tolerance, and 5V operating voltage. It is an NTC Thermistor for temperature sensing applications, featuring dual-ended terminals and surface mounting type. With a thermal sensitivity index of 4250K, it operates b/w -40°C to 150°C efficiently.
NCU18WB473J6SRB
NTC THERMISTOR; Mounting Type: SURFACE MOUNT; Resistance: 47000 ohm; Maximum Operating Temperature: 150 Cel; Tolerance: 5 %; Packing Method: TR, PAPER, 7 INCH;
NCU15XH103J6SRC
NTC THERMISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10000 ohm; Maximum Operating Temperature: 150 Cel; Tolerance: 5 %; Width (Package): .5 mm;
NCU18WF104F60RB
NTC THERMISTOR; Mounting Type: SURFACE MOUNT; Resistance: 100000 ohm; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %; Height (Package): .8 mm;
NCU18WB473D6SRB
NTC THERMISTOR; Mounting Type: SURFACE MOUNT; Resistance: 47000 ohm; Maximum Operating Temperature: 150 Cel; Tolerance: .5 %; Operating Voltage: 5 V;
NCU18WB473D60RB
NTC THERMISTOR; Mounting Type: SURFACE MOUNT; Resistance: 47000 ohm; Maximum Operating Temperature: 125 Cel; Tolerance: .5 %; Thermal Sensitivity Index: 4050 K;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved