Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Murata Manufacturing's LQW2BASR15J00L is an 0805 chip inductor with 0.15 uH nominal inductance, suitable for RF applications. Featuring dual-ended terminals and a max operating temperature of 125°C, it has a Q factor of at least 50 at 250 MHz. This general-purpose inductor has a self-resonance frequency of 920 MHz and is constructed with ferrite material.
Median Price
$0.096
Lifecycle Status
Suppliers In-Stock
12
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
$0.150
100+ parts
$0.103
1k+ parts
$0.081
10k+ parts
$0.070
DigiKey
$0.102
$0.084
$0.071
Newark
$0.155
$0.106
-
Arrow
$0.045
Chip1Stop
$0.058
Farnell
$0.088
$0.057
Element14
$0.104
$0.098
Verical
TME
$0.130
$0.090
$0.068
$0.062
IBS Electronics
$0.082
HZD GmbH
Nova Conductors
Corohmni
$0.905
RC Electronics
A-Z Elektronik GmbH
Authorized Procurement Solutions
Alle Elektronik GmbH
Argo Parts USA
Aranea Global
Robosynatics
Lucentia Tech
$0.689
$0.675
Continental Prestige Electronics
$0.097
$0.078
$0.059
Surface mount technology allows for easy installation and placement on PCBs, making it convenient for manufacturing processes.
Optimized for high frequency applications, ensuring reliable performance in RF circuits.
Suitable for applications requiring a specific level of inductance, providing precise control over circuit characteristics.
Capable of handling moderate current levels, making it versatile for various circuit designs.
Low DC resistance minimizes power loss and heat generation, contributing to the efficiency of the circuit.
Ferrite core offers high magnetic permeability, increasing inductance and ensuring stable performance over a wide frequency range.
Fixed Inductors LQW2BASR15J00L attributes and parameters. Explore more Fixed Inductors devices from Murata Manufacturing
Inductor Type:
Inductor Application:
Nominal Inductance:
Maximum Rated Current:
Minimum Quality Factor (at L-nom):
DC Resistance:
Tolerance:
No. of Functions:
Self Resonance Frequency:
Test Frequency:
Special Feature:
Package Shape:
Case or Size Code:
Shielded:
Construction:
Core Material:
Surface Mounted:
Minimum Operating Temperature:
Maximum Operating Temperature:
Terminal Position:
Terminal Shape:
Terminal Finish:
No. of Terminals:
Package Style:
Package Length:
Package Height:
Package Width:
Packing Method:
JESD-609 Code:
LQW2BASR15J00L Inductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8504.50.80.00
SB
8504.50.00.00
Murata Manufacturing Co., Ltd. is a Japanese electronics manufacturer founded in 1944 by Akira Murata. Through its expansive supply chain network and innovative product portfolio, Murata designs and manufactures a wide variety of electronic components including capacitors, inductor coils, buzzers, sensors and more for applications in the automotive, medical, industrial and consumer sectors. Based in Nagaokakyo City in Kyoto Prefecture of Japan, Murata operates factories around the world with other facilities located throughout Asia Pacific region such as China and Thailand; North America; Europe; Latin America; Middle East & Africa; as well as Oceania.
Chairman of the Board
Tsuneo Murata
President
Norio Nakajima
Senior Executive VP, Board Member
Hiroshi Iwatsubo
Murata Integrated Passive Solution
Fabrication
Fab Initiation
1989
France
Caen
Wafer Capacity
12,500
Sendai Fab
2008
Japan
Sendai
20,000
Kanazawa - Fab 2
2016
Hakusan
10,000
Komoro
1980
Yasu Plant
1987
Yasu
14,500
Kanazawa Plant
1985
5,000
Vantaa - Fab 1
1998
Finland
Vantaa
Vantaa - Fab 2
2006
12,000
2N7002
Motorola
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Package Body Material: PLASTIC/EPOXY; Qualification: Not Qualified; Minimum Operating Temperature: -55 Cel;
Secos
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .3 W; Maximum Drain Current (ID): .115 A; Maximum Drain-Source On Resistance: 7.5 ohm;
M39029/58-360
Glenair
CONNECTOR ACCESSORY; Contact Gender: MALE; Material: COPPER ALLOY; IEC Conformity: NO; MIL-Connector Accessory Name: CONTACT; MIL Conformity: YES;
SMBJ18CA
Uniohm
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ULN2803A
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Terminal Position: DUAL; JESD-30 Code: R-PDIP-T18;
Jgd Semiconductors
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Polarity: BIDIRECTIONAL; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.2 V; Maximum Repetitive Peak Reverse Voltage: 18 V;
M85049/85-08W02
TE Connectivity
CONNECTOR ACCESSORY; Minimum Operating Temperature: -65 Cel; Wire Gauge (AWG): 0; Maximum Wire Size: 0 AWG; Maximum Operating Temperature: 175 Cel; Material: ALUMINUM ALLOY;
LM317T
Tt Electronics Plc
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Qualification Status: Not Qualified; JESD-30 Code: R-PSFM-T3;
IRLML6402TRPBF
Infineon Technologies
IRLML6402TRPBF by Infineon is a P-CHANNEL FET for SWITCHING applications. It features a 20V DS Breakdown Voltage, 22A IDM, and 0.065 ohm RDS(on). With a small outline package and matte tin finish, it operates in temperatures from -55 to 150 °C.
2N2222A
Shanghai Lunsure Electronic Technology
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JESD-30 Code: O-MBCY-W3;
LM2931AZ-5.0RPG
Onsemi
LM2931AZ-5.0RPG by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V nominal output voltage and 0.1A max output current. It features a low dropout voltage of 0.6V, making it suitable for applications requiring stable power supply in temperature range from -40 to 125°C. The package style is cylindrical with matte tin terminal finish, ideal for various electronic devices needing precise voltage regulation.
SS14
Hy Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM78L05ACMX/NOPB
Texas Instruments
LM78L05ACMX/NOPB by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and max current of 0.1A. It operates b/w 0-125°C, has a dropout voltage of 1.6V, and can handle input voltages up to 30V making it ideal for various electronic applications requiring stable power supply.
LAN8720AI-CP-TR
Standard Microsystems
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 24; Package Code: HVQCCN; Package Shape: SQUARE;
RC0603FR-0710KL
Yageo
Yageo's RC0603FR-0710KL is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. It operates b/w -55 to 155 °C and is ideal for surface mount applications in electronics requiring precise resistance values.
Sensitron Semiconductor
BAV99
STMicroelectronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS84-7-F
SPC TECHNOLOGY/ MULTICOMP
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Shape: RECTANGULAR; Transistor Element Material: SILICON;
LM358AN
Philips Semiconductors
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
Taiwan Semiconductor
ELC18B102L
Panasonic
ELC18B102L by Panasonic is a fixed inductor with 1000uH nominal inductance, suitable for power applications. Featuring a cylindrical package with radial terminal placement, it has a max rated current of 1.1A and operates b/w -20 to 105°C. With a DC resistance of 0.39 ohm and ferrite core material, it offers general-purpose functionality in compact dimensions.
SRR1210-470M
Bourns
Bourns SRR1210-470M is a shielded, surface mount fixed inductor with 47uH nominal inductance. It has a max rated current of 3.8A and operates b/w -40 to 125°C. Ideal for power applications, this general purpose inductor features a self-resonance frequency of 4.5MHz and DC resistance of 0.072 ohm.
36501J10NJTDG
Tyco Electronics Components
GENERAL PURPOSE INDUCTOR; Inductor Application: RF INDUCTOR; No. of Terminals: 2; Shielded: NO; Surface Mount: YES; Nominal Inductance (L): .01 uH;
IHLP1212BZER1R0M11
Vishay Intertechnology
Vishay Intertechnology's IHLP1212BZER1R0M11 is a shielded, surface mount fixed inductor with 1uH nominal inductance and 5A max rated current. Ideal for high current applications, this rectangular package inductor operates b/w -55°C to 125°C, featuring a DC resistance of 0.024 ohm and self-resonance frequency of 75MHz.
VLS252012HBX-2R2M-1
TDK
VLS252012HBX-2R2M-1 by TDK is a shielded, surface mount fixed inductor with 2.2uH nominal inductance and 105°C max operating temp. Ideal for power applications, this general purpose inductor has a DC resistance of 0.102 ohm and can handle a max rated current of 2.04A.
MLZ2012N100LT000
MLZ2012N100LT000 by TDK is a 0805 fixed inductor with 10uH nominal inductance, 0.3 ohm DC resistance, and 20% tolerance. It is a general purpose inductor suitable for various applications requiring a max rated current of 0.5A and operating temperatures ranging from -55 to 125 °C.
NRS4018T4R7MDGJV
Taiyo Yuden
Taiyo Yuden's NRS4018T4R7MDGJV is a fixed inductor with 4.7uH nominal inductance, 1.7A max rated current, and 35MHz self-resonance frequency. Ideal for power applications, it features a ferrite core, operates b/w -40 to 125 °C, and has dual-ended terminals for SMT installation.
ETQP4M220KVC
Panasonic ETQP4M220KVC is a shielded, surface mount fixed inductor with 22uH nominal inductance. It has a max rated current of 5A and operates b/w -55 to 155°C. Ideal for power applications, this general purpose inductor features metal composite core material and dual-ended terminal placement.
LQH32CN100K33L
Murata Manufacturing
Murata Manufacturing's LQH32CN100K33L is a 10uH general purpose inductor with 0.39ohm DC resistance and 26MHz self-resonance frequency. It is a surface mount component suitable for RF applications, featuring dual-ended terminals and a compact 1210 size package.
DR74-680-R
Cooper Electronic Technologies
GENERAL PURPOSE INDUCTOR; Inductor Application: POWER INDUCTOR; No. of Terminals: 2; Package Style (Meter): SMT; Shielded: YES; Surface Mount: YES;
MLZ2012M3R3ATD69
MLZ2012M3R3ATD69 by TDK is an 0805 fixed inductor with 3.3uH nominal inductance, 0.2 ohm DC resistance, and 20% tolerance. Ideal for decoupling circuits, it operates b/w -55 to 125 °C with a max rated current of 0.5A. This shielded SMT inductor features dual-ended terminals and ferrite core material.
XAL4030-472MEC
Coilcraft
Coilcraft XAL4030-472MEC is a shielded, surface mount fixed inductor with 4.7uH nominal inductance and 5.1A max rated current. Ideal for power applications, it operates b/w -40 to 125°C, featuring a self-resonance frequency of 36MHz.
SD53-4R7-R
Coiltronics
GENERAL PURPOSE INDUCTOR; No. of Terminals: 2; Package Style (Meter): SMT; Shielded: YES; Surface Mount: YES; Maximum Operating Temperature: 125 Cel;
1506
Hammond Manufacturing
GENERAL PURPOSE INDUCTOR; Inductor Application: RF INDUCTOR; No. of Terminals: 2; Package Style (Meter): Axial; Shielded: NO; Surface Mount: NO;
LQH32PHR47NNCL
Murata Manufacturing's LQH32PHR47NNCL is a shielded SMT inductor with 0.47uH nominal inductance, 2.9A max current, and 30% tolerance. Ideal for RF applications, it operates b/w -40 to 125 °C with a self-resonance frequency of 100 MHz.
B82477R4683M100
B82477R4683M100 by TDK is a surface mount, shielded fixed inductor with dual-ended terminal placement. It has a nominal inductance of 68 uH and can handle a max rated current of 2.8 A. This general purpose inductor is commonly used for power applications due to its high operating temperature range and low DC resistance.
3615A100K
TE Connectivity's 3615A100K is a surface mount fixed inductor with dual-ended terminals, ideal for RF applications. It offers a nominal inductance of 10uH, max operating temperature of 100°C, and self-resonance frequency of 42MHz. This general-purpose inductor has a compact rectangular package measuring 13mm x 5mm x 5.3mm.
ASPI-4030S-100M-T
Abracon
Abracon's ASPI-4030S-100M-T is a shielded, surface mount fixed inductor with 10uH nominal inductance and 1.5A max rated current. Ideal for power applications, it features a nickel-zinc ferrite core, operates b/w -40 to 125°C, and has a self-resonance frequency of 21MHz.
NR4018T100M
NR4018T100M by Taiyo Yuden is a shielded fixed inductor with 10uH nominal inductance, 0.84A max rated current, and 24MHz self-resonance frequency. It is a power inductor suitable for general purpose applications, featuring dual-ended terminals and ferrite core material. This SMT component has a compact size of 4x4x1.8mm and operates b/w -25°C to 120°C.
B78108S1104J000
TDK B78108S1104J000 is a 100uH general purpose RF inductor with 0.8mm lead diameter. It operates b/w -55 to 125°C, has 1.7ohm DC resistance, and self-resonance frequency of 5MHz. Ideal for applications requiring high Q factor and reliability in tubular package design.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
LQW2UAS1R5J00L
Murata Manufacturing's LQW2UAS1R5J00L is a 1.5uH chip inductor with dual-ended terminals, suitable for RF applications. It has a max operating temperature of 125°C and a DC resistance of 2.3 ohm, making it ideal for general purpose use at self-resonance frequency of 120 MHz.
LQW2UAS39NG00L
LQW2UAS39NG00L by Murata Manufacturing is a surface mount fixed inductor with a nominal inductance of 0.039 uH. It is a general purpose inductor suitable for RF applications, with a max operating temperature of 125 °C and a max rated current of 1 A.
LQW2BASR27J00L
Murata Manufacturing's LQW2BASR27J00L is an 0805 chip inductor with 0.27 uH nominal inductance, suitable for RF applications. Featuring a max rated current of 0.35 A and self-resonance frequency of 730 MHz, it offers high quality factor at 250 MHz. With dual-ended terminals and ferrite core material, this general purpose inductor operates b/w -55 to 125 °C.
LQW2BASR47J00L
GENERAL PURPOSE INDUCTOR; Inductor Application: RF INDUCTOR; No. of Terminals: 2; Package Style (Meter): SMT; Shielded: NO; Surface Mount: YES;
LQW2BASR22J00L
LQW21HN2R2J00L
LQW2BHN2N7D13L
LQW2BAS33NG00L
LQW2UAS1R2J00L
Murata Manufacturing's LQW2UAS1R2J00L is a 1008-sized chip inductor with 1.2uH nominal inductance, suitable for RF applications. It features dual-ended terminals, operates at -55 to 125 °C, and has a max rated current of 0.31A.
LQW2BHN12NJ03L
LQW21FTR47M0HL
GENERAL PURPOSE INDUCTOR; Inductor Application: RF INDUCTOR; No. of Terminals: 2; Package Style (Meter): SMT; Shielded: YES; Surface Mount: YES;
LQW2UAS3R3J00L
The Murata Manufacturing LQW2UAS3R3J00L is a chip inductor with 3.3uH nominal inductance, suitable for RF applications. It has a max operating temperature of 125°C and a self-resonance frequency of 90MHz. With dual-ended terminals and a compact size of 1008, it is ideal for surface mount designs requiring high-quality factor components.
LQW2UASR39J00L
LQW21HNR47J00L
LQW2BHN12NJ01L
LQW2BHN12NJ03K
Murata Manufacturing's LQW2BHN12NJ03K is an 0805 wirewound chip inductor with 0.012 uH nominal inductance, suitable for RF applications. With a max operating temperature of 85°C and self-resonance frequency of 3200 MHz, it offers high performance in a compact SMT package. Featuring dual-ended terminals and Q measured at 250 MHz, this general-purpose inductor ensures reliable operation with a min quality factor of 30.
LQW2BHN12NK13
GENERAL PURPOSE INDUCTOR; Inductor Application: RF INDUCTOR; No. of Terminals: 2; Shielded: NO; Surface Mount: YES; Terminal Shape: WRAPAROUND;
LQW2BHN12NK13K
LQW2BASR24J00L
LQW2BASR15J00K
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved