Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Murata Manufacturing's LQW2BASR47J00L is a chip inductor with 0.47uH nominal inductance, 1.76 ohm DC resistance, and 300 MHz self-resonance frequency. Ideal for RF applications, this SMT inductor has dual-ended terminals and operates b/w -55 to 125 °C.
Median Price
$0.094
Lifecycle Status
Suppliers In-Stock
22
In-Stock Inventory
1k+
Master Electronics
1+ parts
$0.142
100+ parts
-
1k+ parts
10k+ parts
$0.116
DigiKey
$0.160
$0.106
$0.087
Newark
$0.165
$0.118
$0.096
TTI
$0.066
Arrow
Verical
Farnell
$0.069
$0.058
Element14
$0.236
$0.205
$0.117
Future Electronics
$0.125
Chip1Stop
$0.059
TTI Europe
$0.065
RS (Exports)
$0.095
Nova Conductors
$0.110
TME
$0.100
$0.073
$0.050
Chip Stock
NexGen Digital
Bristol Electronics
Semtec, LLC
Vyrian
Rapid Electronics
IBS Electronics
$0.119
Semi Source
Argo Parts USA
$0.107
Modulus Dynamics
$0.425
Corohmni
$0.595
Aztec Data Supply Inc.
$0.730
Abacus Technologies
Eastek
Glotronic Ltd.
Perfect Parts
Alle Elektronik GmbH
Authorized Procurement Solutions
Continental Prestige Electronics
$0.101
$0.078
Netroflash
$0.108
$0.104
$0.102
Infinite Electronics LLP (Excess)
GreenTree Electronics
This allows for easy and convenient mounting on PCBs, saving space and making assembly more efficient.
Suitable for high frequency applications, ensuring reliable performance in RF circuits.
Offers a reasonable level of inductance, making it versatile for a range of applications.
Can handle relatively high currents, suitable for various circuit designs.
Low resistance helps minimize power loss and improve efficiency in the circuit.
Compact size ideal for space-constrained designs, while still providing good performance.
Fixed Inductors LQW2BASR47J00L attributes and parameters. Explore more Fixed Inductors devices from Murata Manufacturing
Inductor Type:
Inductor Application:
Nominal Inductance:
Maximum Rated Current:
Minimum Quality Factor (at L-nom):
DC Resistance:
Tolerance:
No. of Functions:
Self Resonance Frequency:
Test Frequency:
Special Feature:
Package Shape:
Case or Size Code:
Shielded:
Construction:
Core Material:
Surface Mounted:
Minimum Operating Temperature:
Maximum Operating Temperature:
Terminal Position:
Terminal Shape:
No. of Terminals:
Package Style:
Package Length:
Package Height:
Package Width:
Packing Method:
LQW2BASR47J00L Inductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8504.50.80.00
SB
8504.50.00.00
Murata Manufacturing Co., Ltd. is a Japanese electronics manufacturer founded in 1944 by Akira Murata. Through its expansive supply chain network and innovative product portfolio, Murata designs and manufactures a wide variety of electronic components including capacitors, inductor coils, buzzers, sensors and more for applications in the automotive, medical, industrial and consumer sectors. Based in Nagaokakyo City in Kyoto Prefecture of Japan, Murata operates factories around the world with other facilities located throughout Asia Pacific region such as China and Thailand; North America; Europe; Latin America; Middle East & Africa; as well as Oceania.
Chairman of the Board
Tsuneo Murata
President
Norio Nakajima
Senior Executive VP, Board Member
Hiroshi Iwatsubo
Murata Integrated Passive Solution
Fabrication
Fab Initiation
1989
France
Caen
Wafer Capacity
12,500
Sendai Fab
2008
Japan
Sendai
20,000
Kanazawa - Fab 2
2016
Hakusan
10,000
Komoro
1980
Yasu Plant
1987
Yasu
14,500
Kanazawa Plant
1985
5,000
Vantaa - Fab 1
1998
Finland
Vantaa
Vantaa - Fab 2
2006
12,000
2N2222A
Minilogic Device
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .625 W; Maximum Collector Current (IC): .001 A;
DS18B20Z/T&R
Maxim Integrated
DS18B20Z/T&R by Maxim Integrated is a 12-bit digital temperature sensor with a max supply voltage of 5.5V and an accuracy of 0.50°C. It features a 1-Wire interface, operates b/w -55°C to 125°C, and is ideal for applications requiring precise temperature monitoring in compact spaces.
BSS138
Taitron Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3.5 ohm; Maximum Drain Current (ID): .2 A; Peak Reflow Temperature (C): NOT SPECIFIED;
LL4148
Lite-on Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
CRCW080510R0FKEA
Vishay Intertechnology
Vishay Intertechnology's CRCW080510R0FKEA is a fixed resistor with 10 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for surface mount applications in automotive electronics due to its AEC-Q200 reference standard and operating voltage of 150 V. Operating temperature range from -55 to 155 °C ensures reliability in various environments.
DS18B20U
Dallas Semiconductor
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Minimum Operating Temperature: -55 Cel; Package Equivalence Code: TSSOP8,.19;
BAV99
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
DS18B20Z+
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Body Width: 3.9 inch; Maximum Supply Voltage: 5.5 V;
Daco Semiconductor
1N4148
Rectron
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM107H/883
Texas Instruments
LM107H/883 by Texas Instruments is a MIL-STD-883 compliant operational amplifier with 3000uV max input offset voltage, 80dB common mode reject ratio, and 250kHz unity gain bandwidth. Ideal for military applications due to its -55 to 125 °C operating temperature range and robust metal package body material.
SS14
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
B340A-13-F
SPC TECHNOLOGY/ MULTICOMP
New Jersey Semiconductor Products
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Package Shape: ROUND;
1N4148WS
Weitron Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM7805CT
Comset Semiconductors
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Operating Temperature (TJ-Min): 0 Cel; Technology: BIPOLAR;
Kec
RECTIFIER DIODE; Surface Mount: NO; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Non Repetitive Peak Forward Current: 2 A; Config: SINGLE; Maximum Operating Temperature: 200 Cel;
Itt Components
RECTIFIER DIODE; Surface Mount: YES; Maximum Reverse Recovery Time: .005 us; Config: SINGLE; Maximum Operating Temperature: 200 Cel; Maximum Non Repetitive Peak Forward Current: 1 A;
1N5819HW-7-F
XFL4020-472MEB
Coilcraft
XFL4020-472MEB by Coilcraft is a surface mount, shielded fixed inductor with a nominal inductance of 4.7 uH and max rated current of 5 A. It is commonly used as a power inductor in general purpose applications.
IHLP3232DZER4R7M11
Vishay Intertechnology's IHLP3232DZER4R7M11 is a shielded, surface mount fixed inductor with 4.7uH nominal inductance and 8A max rated current. Ideal for high current applications, this general purpose inductor has a self-resonance frequency of 17MHz and operates b/w -55°C to 125°C.
PE-0402CD400KTT
Pulse Electronics
PE-0402CD400KTT by Pulse Electronics is a 0402 wirewound chip inductor with 0.04uH nominal inductance, suitable for RF applications. With a max operating temp of 125°C and self-resonance frequency of 2240MHz, it's ideal for general purpose use in SMT configurations. Featuring dual-ended terminals and ceramic core material, this inductor offers high quality factor and low DC resistance.
744771133
Wuerth Elektronik & Kg
Wurth Elektronik 744771133 is a shielded fixed inductor with 33uH nominal inductance, suitable for power applications. It has a max rated current of 2.8A and operates b/w -40 to 125°C. The dual-ended terminal placement and ferrite core make it ideal for general purpose use in SMT packages.
5511
Bourns
The Bourns 5511 is a high current inductor with 50uH nominal inductance and 8A max rated current. Featuring radial terminal placement, it has a tubular package shape and operates b/w -55°C to 105°C. Ideal for general purpose applications requiring high current handling capabilities.
NRS4012T1R0NDGG
Taiyo Yuden
NRS4012T1R0NDGG by Taiyo Yuden is a SMT fixed inductor with 1uH nominal inductance, 2.2A max current, and 100MHz self-resonance freq. Ideal for power applications due to its general purpose design, ferrite core material, and compact rectangular package measuring 4x4x1.2mm.
DFE252012F-1R0M=P2
Murata Manufacturing
Murata Manufacturing's DFE252012F-1R0M=P2 is a shielded, surface mount fixed inductor with 1uH nominal inductance and 3.3A max rated current. Ideal for power applications, it operates b/w -40°C to 125°C and features a compact rectangular package (2.5mm x 2mm x 1.2mm).
74408942047
Wurth Elektronik 74408942047 is a shielded, dual-ended fixed inductor with 4.7uH nominal inductance and 1.55A max rated current. Ideal for power applications, this SMT inductor has a rectangular package measuring 4.8mm x 4.8mm x 2.8mm, operating b/w -40°C to 125°C with a DC resistance of 0.103 ohm at a self-resonance frequency of 38MHz.
IHLP5050EZER1R0M01
Vishay Intertechnology's IHLP5050EZER1R0M01 is a shielded, surface mount fixed inductor with 1uH nominal inductance and 29A max rated current. Ideal for high current applications, this rectangular package inductor operates b/w -55°C to 125°C, featuring a DC resistance of 0.0025 ohm and a compact size of 13.2mm x 12.9mm x 5mm.
DR127-150-R
Eaton Corporation
Eaton Corporation's DR127-150-R is a shielded, surface mount fixed inductor with 15uH nominal inductance. It has a max rated current of 5.03A and operates b/w -40 to 125°C, making it ideal for power applications requiring general purpose inductors.
2103
Jw Miller Magnetics
GENERAL PURPOSE INDUCTOR; Inductor Application: HIGH CURRENT INDUCTOR; No. of Terminals: 2; Shielded: NO; Surface Mount: NO; DC Resistance: .012 ohm;
46104C
46104C by Murata Manufacturing is a shielded, surface mount fixed inductor with 100uH nominal inductance. It has a max rated current of 0.86A and operates b/w -40 to 125°C. Ideal for power applications due to its general purpose design and compact rectangular package.
B82731T2102A020
TDK
B82731T2102A020 by TDK is a fixed inductor with 10000 uH nominal inductance, 0.63 ohm DC resistance, and 1 A max rated current. It is a power inductor for PCB mount applications, featuring dual in-line terminal placement and ferrite core material. Operating temperature ranges from -40 to 125 °C.
IHLP5050CEER2R2M01
Vishay Intertechnology's IHLP5050CEER2R2M01 is a shielded, surface mount inductor with 2.2uH nominal inductance and 16A max rated current. Ideal for high current applications, this rectangular package has dual-ended terminals and operates b/w -55°C to 125°C.
XAL6060-223MEC
Coilcraft XAL6060-223MEC is a shielded, surface mount inductor with 22uH nominal inductance and 5A max rated current. Ideal for power applications, it has dual-ended terminals, operates b/w -40 to 125°C, and features composite core material.
B82734R2132B030
B82734R2132B030 by TDK is a fixed inductor with 47000 uH nominal inductance, suitable for power applications. It has a max rated current of 1.3 A and operates b/w -40 to 125 °C, featuring a rectangular package style for PCB mount. Ideal for general purpose use, this inductor offers low DC resistance at 0.56 ohm and is constructed with ferrite core material.
0603CS-36NXJLU
0603CS-36NXJLU by Coilcraft is a surface mount fixed inductor with 0.036uH nominal inductance, 2080MHz self-resonance frequency, and 125°C max operating temp. Ideal for RF applications due to its 250MHz test frequency and ceramic core material.
LQP03TN9N1J02D
Murata Manufacturing's LQP03TN9N1J02D is a chip inductor with 0.0091 uH nominal inductance, 3300 MHz self-resonance frequency, and 125 °C max operating temp. Ideal for RF applications due to its small size (0201) and high quality factor of 14 at L-nom.
41480
Pico Electronics
GENERAL PURPOSE INDUCTOR; Inductor Application: POWER INDUCTOR; No. of Terminals: 4; Package Style (Meter): SMT; Shielded: NO; Surface Mount: YES;
74477710
Wurth Elektronik 74477710 is a shielded, dual-ended SMT inductor with 10uH nominal inductance and 2A max current. Ideal for power applications, it has a self-resonance frequency of 26MHz and operates b/w -40°C to 125°C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
LQW2UAS1R5J00L
Murata Manufacturing's LQW2UAS1R5J00L is a 1.5uH chip inductor with dual-ended terminals, suitable for RF applications. It has a max operating temperature of 125°C and a DC resistance of 2.3 ohm, making it ideal for general purpose use at self-resonance frequency of 120 MHz.
LQW2UAS39NG00L
LQW2UAS39NG00L by Murata Manufacturing is a surface mount fixed inductor with a nominal inductance of 0.039 uH. It is a general purpose inductor suitable for RF applications, with a max operating temperature of 125 °C and a max rated current of 1 A.
LQW2BASR27J00L
Murata Manufacturing's LQW2BASR27J00L is an 0805 chip inductor with 0.27 uH nominal inductance, suitable for RF applications. Featuring a max rated current of 0.35 A and self-resonance frequency of 730 MHz, it offers high quality factor at 250 MHz. With dual-ended terminals and ferrite core material, this general purpose inductor operates b/w -55 to 125 °C.
LQW2BASR22J00L
GENERAL PURPOSE INDUCTOR; Inductor Application: RF INDUCTOR; No. of Terminals: 2; Package Style (Meter): SMT; Shielded: NO; Surface Mount: YES;
LQW21HN2R2J00L
LQW2BHN2N7D13L
LQW2BAS33NG00L
LQW2UAS1R2J00L
Murata Manufacturing's LQW2UAS1R2J00L is a 1008-sized chip inductor with 1.2uH nominal inductance, suitable for RF applications. It features dual-ended terminals, operates at -55 to 125 °C, and has a max rated current of 0.31A.
LQW2BHN12NJ03L
LQW21FTR47M0HL
GENERAL PURPOSE INDUCTOR; Inductor Application: RF INDUCTOR; No. of Terminals: 2; Package Style (Meter): SMT; Shielded: YES; Surface Mount: YES;
LQW2UAS3R3J00L
The Murata Manufacturing LQW2UAS3R3J00L is a chip inductor with 3.3uH nominal inductance, suitable for RF applications. It has a max operating temperature of 125°C and a self-resonance frequency of 90MHz. With dual-ended terminals and a compact size of 1008, it is ideal for surface mount designs requiring high-quality factor components.
LQW2UASR39J00L
LQW21HNR47J00L
LQW2BHN12NJ01L
LQW2BHN12NJ03K
Murata Manufacturing's LQW2BHN12NJ03K is an 0805 wirewound chip inductor with 0.012 uH nominal inductance, suitable for RF applications. With a max operating temperature of 85°C and self-resonance frequency of 3200 MHz, it offers high performance in a compact SMT package. Featuring dual-ended terminals and Q measured at 250 MHz, this general-purpose inductor ensures reliable operation with a min quality factor of 30.
LQW2BHN12NK13
GENERAL PURPOSE INDUCTOR; Inductor Application: RF INDUCTOR; No. of Terminals: 2; Shielded: NO; Surface Mount: YES; Terminal Shape: WRAPAROUND;
LQW2BHN12NK13K
LQW2BASR24J00L
LQW2BASR15J00L
LQW2BASR47J0CB
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved