Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Murata Manufacturing's LQW2UAS1R5J00L is a 1.5uH chip inductor with dual-ended terminals, suitable for RF applications. It has a max operating temperature of 125°C and a DC resistance of 2.3 ohm, making it ideal for general purpose use at self-resonance frequency of 120 MHz.
Median Price
$0.112
Lifecycle Status
Suppliers In-Stock
10
In-Stock Inventory
1k+
Arrow
1+ parts
$0.014
100+ parts
1k+ parts
10k+ parts
Mouser Electronics
$0.180
$0.121
$0.095
$0.079
DigiKey
$0.125
$0.103
-
Chip1Stop
$0.045
Nova Conductors
$0.102
Bristol Electronics
$0.408
$0.204
$0.082
ACDS - Activité Composants Distribution Service
IBS Electronics
$0.062
Dan-Mar Components
Vyrian
Semicontronic
$0.012
Aranea Global
$0.100
$0.096
Continental Prestige Electronics
Argo Parts USA
$0.099
Corohmni
$0.110
Modulus Dynamics
$0.113
$0.109
Advanced Electronics
$0.262
$0.249
Aztec Data Supply Inc.
$0.630
QUARKTWIN TECHNOLOGY LTD
Robosynatics
Lucentia Tech
$98.090
Being surface mount allows for easy installation and space-saving on PCB.
Dual ended terminal placement provides flexibility in circuit design and easy connectivity.
Tested at a high frequency of 50 MHz, ensuring its suitability for RF applications.
Standard size code makes it compatible with various applications and devices.
Specifically designed for RF applications, ensuring optimal performance in such scenarios.
With a nominal inductance of 1.5 uH, it is suitable for a range of circuit requirements.
Capable of operating at high temperatures, ensuring reliability under challenging conditions.
Can handle a maximum rated current of 0.33 A, providing sufficient power handling capability.
High quality factor ensures efficient energy storage and minimal loss in the circuit.
Tin terminal finish enhances solderability and conductivity for reliable connections.
With a self-resonance frequency of 120 MHz, it is suitable for high-frequency applications.
Low DC resistance helps in minimizing power loss and improving overall efficiency.
Air core material reduces electromagnetic interference and is ideal for high-frequency applications.
Special feature of measuring Q at 50 MHz indicates its performance at high frequencies.
Tight tolerance of 5% ensures consistency and accuracy in circuit performance.
Fixed Inductors LQW2UAS1R5J00L attributes and parameters. Explore more Fixed Inductors devices from Murata Manufacturing
Inductor Type:
Inductor Application:
Nominal Inductance:
Maximum Rated Current:
Minimum Quality Factor (at L-nom):
DC Resistance:
Tolerance:
No. of Functions:
Self Resonance Frequency:
Test Frequency:
Special Feature:
Package Shape:
Case or Size Code:
Shielded:
Construction:
Core Material:
Surface Mounted:
Minimum Operating Temperature:
Maximum Operating Temperature:
Terminal Position:
Terminal Shape:
Terminal Finish:
No. of Terminals:
Package Style:
Package Length:
Package Height:
Package Width:
Packing Method:
JESD-609 Code:
LQW2UAS1R5J00L Inductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8504.50.80.00
SB
8504.50.00.00
Murata Manufacturing Co., Ltd. is a Japanese electronics manufacturer founded in 1944 by Akira Murata. Through its expansive supply chain network and innovative product portfolio, Murata designs and manufactures a wide variety of electronic components including capacitors, inductor coils, buzzers, sensors and more for applications in the automotive, medical, industrial and consumer sectors. Based in Nagaokakyo City in Kyoto Prefecture of Japan, Murata operates factories around the world with other facilities located throughout Asia Pacific region such as China and Thailand; North America; Europe; Latin America; Middle East & Africa; as well as Oceania.
Chairman of the Board
Tsuneo Murata
President
Norio Nakajima
Senior Executive VP, Board Member
Hiroshi Iwatsubo
Murata Integrated Passive Solution
Fabrication
Fab Initiation
1989
France
Caen
Wafer Capacity
12,500
Sendai Fab
2008
Japan
Sendai
20,000
Kanazawa - Fab 2
2016
Hakusan
10,000
Komoro
1980
Yasu Plant
1987
Yasu
14,500
Kanazawa Plant
1985
5,000
Vantaa - Fab 1
1998
Finland
Vantaa
Vantaa - Fab 2
2006
12,000
INA826AIDGKR
Texas Instruments
INA826AIDGKR by Texas Instruments is an instrumentation amplifier with 150uV max input offset voltage, 0.095uA max average bias current, and 1MHz nominal bandwidth. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and high common mode rejection ratio of 120dB.
2N7002
Panjit International
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Time At Peak Reflow Temperature (s): 40; Minimum DS Breakdown Voltage: 60 V;
TM4C1294NCPDTI3
TM4C1294NCPDTI3 by Texas Instruments is a 32-bit microcontroller with Cortex-M4F CPU family. It features 8KB data EEPROM, 20-Ch 12-Bit ADC channels, and 32 DMA channels. Ideal for industrial applications requiring high-speed processing, it offers connectivity options like CAN, Ethernet, I2C, SPI, UART, and USB.
BSS84PH6327XTSA2
Infineon Technologies
BSS84PH6327XTSA2 by Infineon is a P-CHANNEL FET with 60V DS breakdown voltage, ideal for switching applications. It features a single configuration with built-in diode and operates in enhancement mode. With a max drain current of 0.17A and on-resistance of 8 ohm, it offers reliable performance in small outline packages.
OPA2277UA/2K5E4
OPA2277UA/2K5E4 by Texas Instruments is a dual operational amplifier with low-offset and micropower features. It has a max input offset voltage of 100uV, nominal common mode reject ratio of 140dB, and min slew rate of 0.8V/us. Ideal for industrial applications requiring precise signal amplification in compact designs.
LM358AN
Fairchild Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
LL4148
Vishay Intertechnology
Vishay Intertechnology's LL4148 diode features a max reverse recovery time of 0.004 us, forward voltage of 1 V, and output current of 0.15 A. Ideal for rectification applications in electronics due to its high efficiency and low power dissipation capabilities.
2N2222A
Semitronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
CDSOT23-SM712
Bourns
Bourns CDSOT23-SM712 is a bidirectional Transient Voltage Suppressor diode with 400W peak power dissipation and 20uA reverse current. Ideal for surge protection in applications requiring a max clamping voltage of 14V, such as IEC-61000-4-2 compliant systems. Operates b/w -55°C to 150°C with matte tin finish and Gull Wing terminals.
ULN2803A
Onsemi
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Package Body Material: PLASTIC/EPOXY; Qualification: Not Qualified;
Siliconix
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain Current (ID): .115 A; Operating Mode: ENHANCEMENT MODE;
SMBJ18CA
Bytesonic Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
M39029/56-351
TE Connectivity
TE Connectivity's M39029/56-351 is a CRIMP contact type backshell accessory with rated voltage of 115V. It operates b/w -65 to 175 °C, suitable for MIL-C-39029/56 connectors with wire gauge ranging from 28 to 22 AWG. Ideal for military applications requiring female contacts and copper alloy material.
LM358MX
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
NUP2105LT1G
NUP2105LT1G by Onsemi is a Transient Suppression Device with 350W power dissipation, 29.1V breakdown voltage, and 44V clamping voltage. Commonly used in electronic circuits for surge protection due to its bidirectional polarity and silicon diode element material.
PIC18F4550T-I/PT
Microchip Technology
The Microchip Technology PIC18F4550T-I/PT microcontroller operates at a max clock frequency of 48 MHz with 8-bit architecture. It features 13-Ch 10-Bit ADC channels and USB connectivity, making it suitable for industrial applications requiring high-speed data processing and analog-to-digital conversion. With low power mode and flash ROM programmability, this device offers efficient performance in compact designs.
LM317T
Analog Devices
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; No. of Functions: 1; Package Body Material: PLASTIC/EPOXY; Surface Mount: NO;
DS18B20Z
Dallas Semiconductor
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Housing: PLASTIC; Maximum Accuracy (Cel): 0.50;
BSS123,215
NXP Semiconductors
NXP Semiconductors' BSS123,215 is a N-CHANNEL FET for SWITCHING applications. Features include 100V DS Breakdown Voltage, 0.17A Drain Current, and 6 ohm On Resistance. With GULL WING terminals and ENHANCEMENT MODE operation, it's ideal for small outline packages in various electronic devices.
M39029/56351
Esterline Technologies
CONNECTOR ACCESSORY; IEC Conformity: NO; Contact Gender: FEMALE; DIN Conformity: NO; MIL-Connector Accessory Name: CONTACT; Tool Settings: M22520/2-10;
SRR1280-3R3Y
Bourns SRR1280-3R3Y is a shielded, surface mount fixed inductor with 3.3uH nominal inductance and 8.8A max rated current. Ideal for power applications, it features a ferrite core, 30% tolerance, and operates b/w -40 to 125°C temperatures.
LQH43MN330J03L
Murata Manufacturing
Murata Manufacturing's LQH43MN330J03L is a 33uH RF inductor with 1.2 ohm DC resistance and 5% tolerance. Featuring dual-ended terminals, it operates b/w -40 to 85 °C with a max rated current of 0.27 A. Ideal for general purpose applications, this SMT inductor has a self-resonance frequency of 12 MHz and measures 4.5mm x 3.2mm x 2.6mm in size.
IHLP1212ABERR47M11
Vishay Intertechnology's IHLP1212ABERR47M11 is a shielded, high current inductor with 0.47uH nominal inductance and 6.4A max rated current. Ideal for general purpose applications, this SMT fixed inductor has a DC resistance of 0.0195 ohm and operates b/w -55°C to 125°C.
DR125-470-R
Coiltronics
GENERAL PURPOSE INDUCTOR; Inductor Application: POWER INDUCTOR; No. of Terminals: 2; Package Style (Meter): SMT; Shielded: YES; Surface Mount: YES;
SRR1210-101M
Bourns SRR1210-101M is a shielded, surface mount fixed inductor with 100uH nominal inductance. It has a max rated current of 2.5A and operates b/w -40 to 125°C. Ideal for power applications, this general purpose inductor features a ferrite core and wraparound terminals.
XFL4020-332MEB
Coilcraft
XFL4020-332MEB by Coilcraft is a surface mount, shielded fixed inductor with a nominal inductance of 3.3 uH and max rated current of 5.2 A. It is commonly used as a power inductor in general purpose applications.
DR127-1R0-R
Cooper Industries
NRS6045T100MMGKV
Taiyo Yuden
NRS6045T100MMGKV by Taiyo Yuden is a surface mount fixed inductor with a nominal inductance of 10 uH. It has a max rated current of 2.4 A and can operate at temperatures ranging from -40 to 125 °C. This general purpose inductor is commonly used for power applications.
SD53-4R7-R
GENERAL PURPOSE INDUCTOR; No. of Terminals: 2; Package Style (Meter): SMT; Shielded: YES; Surface Mount: YES; Maximum Operating Temperature: 125 Cel;
U05-3
Torotel Products
The Torotel Products U05-3 is a shielded RF inductor with 20000 uH nominal inductance, 1.23 ohm DC resistance, and operates b/w -55 to 85 °C. It features radial terminal placement, molybdenum permalloy core material, and circular package shape. Ideal for general purpose applications requiring precise inductance values at 0.001 MHz test frequency.
SRR1260-471K
Bourns SRR1260-471K is a shielded, dual-ended surface mount inductor with 470uH nominal inductance. Ideal for power applications, it operates b/w -40 to 125°C with a max rated current of 0.95A and self-resonance frequency of 2.6MHz.
82473C
Murata Manufacturing's 82473C is a surface mount fixed inductor with 47uH nominal inductance, suitable for power applications. It has a max rated current of 0.25A and operates b/w -40 to 85°C. The dual-ended terminal placement and rectangular construction make it ideal for general purpose inductor needs.
DR74-101-R
IHLP2525CZER2R2M01
Vishay Intertechnology's IHLP2525CZER2R2M01 is a shielded, surface mount inductor with 2.2uH nominal inductance and 8A max rated current. Ideal for high current applications, this rectangular package features a wraparound terminal shape and operates b/w -55°C to 125°C.
DRA124-4R7-R
GENERAL PURPOSE INDUCTOR; Inductor Application: DC-DC CONVERTER; No. of Terminals: 2; Package Style (Meter): SMT; Shielded: YES; Surface Mount: YES;
SRN6045-150M
Bourns SRN6045-150M is a shielded, surface mount fixed inductor with 15uH nominal inductance and 1.9A max rated current. Ideal for power applications, it operates b/w -40 to 125°C with a self-resonance frequency of 13MHz.
DFE252012P-4R7M=P2
Murata Manufacturing's DFE252012P-4R7M=P2 is a shielded, dual-ended fixed inductor with 4.7uH nominal inductance and 1.4A max rated current. Ideal for power applications, this SMT inductor has WRAPAROUND terminals, operates b/w -40 to 125 °C, and features a metal alloy core in a compact 1008 case size.
CKS2125100M-T
CKS2125100M-T by Taiyo Yuden is an 0805 fixed inductor with 10uH nominal inductance, suitable for RF applications. It has a max operating temperature of 85°C and a self-resonance frequency of 24MHz. This surface-mount component features dual-ended terminals and wraparound terminal shape.
SRU5016-101Y
Bourns SRU5016-101Y is a shielded SMT inductor with 100uH nominal inductance, 0.85 ohm DC resistance, and 30% tolerance. Ideal for power applications, it operates b/w -40 to 125°C with a max rated current of 0.3A.
LQW15AN5N1C00D
Murata Manufacturing's LQW15AN5N1C00D is a 0402-sized wirewound chip inductor with 0.0051 uH nominal inductance. Ideal for RF applications, it has a max operating temperature of 125 °C and self-resonance frequency of 8000 MHz. With dual-ended terminals and matte tin finish, it offers high quality factor at 250 MHz test frequency.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
LQW2UAS39NG00L
LQW2UAS39NG00L by Murata Manufacturing is a surface mount fixed inductor with a nominal inductance of 0.039 uH. It is a general purpose inductor suitable for RF applications, with a max operating temperature of 125 °C and a max rated current of 1 A.
LQW2BASR27J00L
Murata Manufacturing's LQW2BASR27J00L is an 0805 chip inductor with 0.27 uH nominal inductance, suitable for RF applications. Featuring a max rated current of 0.35 A and self-resonance frequency of 730 MHz, it offers high quality factor at 250 MHz. With dual-ended terminals and ferrite core material, this general purpose inductor operates b/w -55 to 125 °C.
LQW2BASR47J00L
GENERAL PURPOSE INDUCTOR; Inductor Application: RF INDUCTOR; No. of Terminals: 2; Package Style (Meter): SMT; Shielded: NO; Surface Mount: YES;
LQW2BASR22J00L
LQW21HN2R2J00L
LQW2BHN2N7D13L
LQW2BAS33NG00L
LQW2UAS1R2J00L
Murata Manufacturing's LQW2UAS1R2J00L is a 1008-sized chip inductor with 1.2uH nominal inductance, suitable for RF applications. It features dual-ended terminals, operates at -55 to 125 °C, and has a max rated current of 0.31A.
LQW2BHN12NJ03L
LQW21FTR47M0HL
GENERAL PURPOSE INDUCTOR; Inductor Application: RF INDUCTOR; No. of Terminals: 2; Package Style (Meter): SMT; Shielded: YES; Surface Mount: YES;
LQW2UAS3R3J00L
The Murata Manufacturing LQW2UAS3R3J00L is a chip inductor with 3.3uH nominal inductance, suitable for RF applications. It has a max operating temperature of 125°C and a self-resonance frequency of 90MHz. With dual-ended terminals and a compact size of 1008, it is ideal for surface mount designs requiring high-quality factor components.
LQW2UASR39J00L
LQW21HNR47J00L
LQW2BHN12NJ01L
LQW2BHN12NJ03K
Murata Manufacturing's LQW2BHN12NJ03K is an 0805 wirewound chip inductor with 0.012 uH nominal inductance, suitable for RF applications. With a max operating temperature of 85°C and self-resonance frequency of 3200 MHz, it offers high performance in a compact SMT package. Featuring dual-ended terminals and Q measured at 250 MHz, this general-purpose inductor ensures reliable operation with a min quality factor of 30.
LQW2BHN12NK13
GENERAL PURPOSE INDUCTOR; Inductor Application: RF INDUCTOR; No. of Terminals: 2; Shielded: NO; Surface Mount: YES; Terminal Shape: WRAPAROUND;
LQW2BHN12NK13K
LQW2BASR24J00L
LQW2BASR15J00L
LQW2UAS1R5G0CB
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved