Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Murata Manufacturing's LQP15MN2N0B02D is a 0402 chip inductor with 0.002 uH nominal inductance, suitable for RF applications. With a max operating temperature of 85°C and self-resonance frequency of 6000 MHz, it offers high quality factor and low DC resistance for general purpose use. The dual-ended, surface mount design with wraparound terminals makes it ideal for compact SMT layouts.
Median Price
-
Lifecycle Status
Suppliers In-Stock
13
In-Stock Inventory
1k+
4 Star Electronics, Inc.
1+ parts
100+ parts
1k+ parts
10k+ parts
Chip Stock
Bristol Electronics
PC Components Company LLC
Vyrian
ECAB
EMSNET
Sea View Technologies
ComSIT Distribution GmbH
Legend Electronics Inc.
Semi Source
Prism Electronics
Nova Conductors
Corohmni
$0.456
Modulus Dynamics
$0.800
AZTECH Wire
$19.800
GreenTree Electronics
Assy Fe
Alle Elektronik GmbH
Kepictronics
Argo Parts USA
Continental Prestige Electronics
Aranea Global
Surface mount technology allows for easy integration onto circuit boards, making installation quick and convenient.
Tested at a high frequency, ensuring performance reliability in RF applications.
Provides precise inductance value for accurate RF circuit design.
Can handle a relatively high current rating, making it suitable for various applications.
High self-resonance frequency indicates good high-frequency performance.
Fixed Inductors LQP15MN2N0B02D attributes and parameters. Explore more Fixed Inductors devices from Murata Manufacturing
Inductor Type:
Inductor Application:
Nominal Inductance:
Maximum Rated Current:
Minimum Quality Factor (at L-nom):
DC Resistance:
Tolerance:
No. of Functions:
Self Resonance Frequency:
Test Frequency:
Special Feature:
Package Shape:
Case or Size Code:
Shielded:
Construction:
Surface Mounted:
Minimum Operating Temperature:
Maximum Operating Temperature:
Terminal Position:
Terminal Shape:
Terminal Finish:
No. of Terminals:
Package Style:
Package Length:
Package Height:
Package Width:
Packing Method:
JESD-609 Code:
LQP15MN2N0B02D Inductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8504.50.80.00
SB
8504.50.00.00
PCN Obsolescence/ EOL - Mult Series 01/Oct/2021
Murata Manufacturing Co., Ltd. is a Japanese electronics manufacturer founded in 1944 by Akira Murata. Through its expansive supply chain network and innovative product portfolio, Murata designs and manufactures a wide variety of electronic components including capacitors, inductor coils, buzzers, sensors and more for applications in the automotive, medical, industrial and consumer sectors. Based in Nagaokakyo City in Kyoto Prefecture of Japan, Murata operates factories around the world with other facilities located throughout Asia Pacific region such as China and Thailand; North America; Europe; Latin America; Middle East & Africa; as well as Oceania.
Chairman of the Board
Tsuneo Murata
President
Norio Nakajima
Senior Executive VP, Board Member
Hiroshi Iwatsubo
Murata Integrated Passive Solution
Fabrication
Fab Initiation
1989
France
Caen
Wafer Capacity
12,500
Sendai Fab
2008
Japan
Sendai
20,000
Kanazawa - Fab 2
2016
Hakusan
10,000
Komoro
1980
Yasu Plant
1987
Yasu
14,500
Kanazawa Plant
1985
5,000
Vantaa - Fab 1
1998
Finland
Vantaa
Vantaa - Fab 2
2006
12,000
2N2222A
Bharat Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
1N4148WT
Good-ark Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
KSZ9031RNXIA
Microchip Technology
KSZ9031RNXIA by Microchip is a 48-terminal Ethernet transceiver with data rate of 1000 Mbps. Operating temperature range from -40 to 85°C makes it suitable for industrial applications. This square-shaped chip carrier has a very thin profile and matte tin finish, ideal for network interfaces.
DP83848IVVX/NOPB
National Semiconductor
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 48; Package Code: QFP; Package Shape: SQUARE;
SMBJ18CA
World Products
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM78L05ACMX/NOPB
Texas Instruments
LM78L05ACMX/NOPB by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and max current of 0.1A. It operates b/w 0-125°C, has a dropout voltage of 1.6V, and can handle input voltages up to 30V making it ideal for various electronic applications requiring stable power supply.
LM358MX
Onsemi
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
1N4148
Lite-on Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Surge Components
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .6 A; No. of Terminals: 3;
EU2B-YS2J03F
Idec
ROTARY SWITCH;
STM32H753BIT6
STMicroelectronics
STM32H753BIT6 by STMicroelectronics is a 32-bit microcontroller with 208 terminals, operating at up to 48 MHz. It features 20-Ch 16-Bit ADCs, 2-Ch 12-Bit DACs, and extensive peripherals for industrial applications like CAN, Ethernet, and USB connectivity. With a wide temperature range of -40 to +85 °C, it's ideal for demanding environments requiring high-speed processing capabilities.
M24308/2-1F
Tyco Electronics Amp
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; IEC Conformity: NO; Mixed Contacts: NO; Empty Shell: NO;
CRCW080510R0FKEA
Vishay Intertechnology
Vishay Intertechnology's CRCW080510R0FKEA is a fixed resistor with 10 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for surface mount applications in automotive electronics due to its AEC-Q200 reference standard and operating voltage of 150 V. Operating temperature range from -55 to 155 °C ensures reliability in various environments.
1N4148WS
Diodes Incorporated
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Minimum DS Breakdown Voltage: 50 V; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
M39029/56-351
Defense Logistics Agency
CONNECTOR ACCESSORY; MIL Conformity: YES; Contact Gender: FEMALE; Mating Contacts: M39029/58-363; Removal Tool Sources: MILITARY; Alternate Contact Sources: MILITARY;
Weitron Technology
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Terminal Form: GULL WING; Terminal Position: DUAL;
MMBF170LT1G
MMBF170LT1G by Onsemi is a N-CHANNEL FET with 60V DS Breakdown Voltage and 0.5A Drain Current. Ideal for SWITCHING applications, it operates in ENHANCEMENT MODE with a max power dissipation of 0.225W. This small outline transistor has a temperature range from -55 to 150 °C.
Micropac Industries
FDN5618P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Transistor Element Material: SILICON; Moisture Sensitivity Level (MSL): 1;
XFL4015-471MEC
Coilcraft
Coilcraft XFL4015-471MEC is a shielded, surface mount inductor with 0.47uH nominal inductance and 11.2A max rated current. Ideal for power applications, it has a self-resonance frequency of 89MHz and operates b/w -40 to 125°C.
SD53-101-R
Coiltronics
GENERAL PURPOSE INDUCTOR; No. of Terminals: 2; Package Style (Meter): SMT; Shielded: YES; Surface Mount: YES; Terminal Finish: Matte Tin (Sn) - with Nickel (Ni) barrier;
NR6045T100M
Taiyo Yuden
NR6045T100M by Taiyo Yuden is a shielded, surface mount fixed inductor with 10uH nominal inductance. It has a max rated current of 2.5A and operates b/w -25 to 120°C. Ideal for power applications, this general purpose inductor features a self-resonance frequency of 12MHz and DC resistance of 0.0611 ohm.
DR127-330-R
Cooper Industries
GENERAL PURPOSE INDUCTOR; Inductor Application: POWER INDUCTOR; No. of Terminals: 2; Package Style (Meter): SMT; Shielded: YES; Surface Mount: YES;
SRP4020TA-3R3M
Bourns
The Bourns SRP4020TA-3R3M is a shielded, surface mount fixed inductor with 3.3uH nominal inductance and 20% tolerance. It has a max operating temperature of 150°C, rated current of 3.5A, and DC resistance of 0.076 ohm. Ideal for power applications requiring a general purpose inductor with high quality factor and self-resonance frequency of 40MHz.
3613C100K
Meggitt Electronic Components
GENERAL PURPOSE INDUCTOR; Inductor Application: RF INDUCTOR; No. of Terminals: 2; Shielded: NO; Surface Mount: YES; No. of Functions: 1;
CM453232-1R0KL
Bourns CM453232-1R0KL is a 1uH SMT inductor with 2 terminals, suitable for RF applications. It operates at -40 to 100°C with a max current of 0.45A and DC resistance of 0.5 ohm. Its compact size (4.5x3.2x3.2mm) and ferrite core make it ideal for general purpose use in electronic circuits requiring high quality factor at 7.96MHz test frequency.
CB2012T100MR
CB2012T100MR by Taiyo Yuden is an 0805 fixed inductor with a nominal inductance of 10uH, suitable for power applications. It has a max operating temperature of 105°C and a DC resistance of 0.65 ohm, making it ideal for general purpose use. With dual-ended terminals and wraparound shape, this SMT inductor offers reliable performance at a self-resonance frequency of 32MHz.
33461
Hirel Systems
GENERAL PURPOSE INDUCTOR; No. of Terminals: 2; Shielded: NO; Surface Mount: NO; Tolerance: 12 %; Shape or Size Description: RECTANGULAR PACKAGE;
IHLP6767GZER8R2M11
Vishay Intertechnology's IHLP6767GZER8R2M11 is a shielded, surface mount fixed inductor with 8.2uH nominal inductance and 21A max rated current. Ideal for RF applications, it operates b/w -55°C to 125°C, featuring a self-resonance frequency of 10MHz and DC resistance of 0.0081 ohm.
DR125-470-R
Cooper Electronic Technologies
B82111B0000C021
TDK
The TDK B82111B0000C021 is a fixed inductor with 5uH nominal inductance, 10A max current, and 175MHz self-resonance freq. Ideal for RF applications due to its tubular construction, axial lead placement, and ferrite core material. Operating temp range from -55°C to 125°C makes it suitable for various electronic devices.
50034
Vanguard Electronics
GENERAL PURPOSE INDUCTOR; Inductor Application: RF INDUCTOR; No. of Terminals: 2; Package Style (Meter): SMT; Shielded: NO; Surface Mount: YES;
SRU5016-100Y
Bourns SRU5016-100Y is a shielded SMT inductor with 10uH nominal inductance, 0.084 ohm DC resistance, and 1A max rated current. Ideal for power applications, it features a ferrite core, operates b/w -40 to 125°C, and has a self-resonance frequency of 40MHz.
3615A101K
Tyco Electronics Components
GENERAL PURPOSE INDUCTOR; Inductor Application: HIGH CURRENT INDUCTOR; No. of Terminals: 2; Shielded: NO; Surface Mount: YES; Terminal Shape: WRAPAROUND;
SRN4018-2R2M
Bourns SRN4018-2R2M is a shielded fixed inductor with 2.2uH nominal inductance, 125°C max operating temp, and 20% tolerance. Ideal for power applications, it features dual-ended terminals, SMT package style, and ferrite core material for general purpose use.
74438357015
Wuerth Elektronik & Kg
Wurth Elektronik 74438357015 is a shielded SMT inductor with 1.5uH nominal inductance, suitable for power applications. It has a max operating temp of 125°C, rated current of 6.2A, and self-resonance frequency of 48MHz. Ideal for general purpose use with AEC-Q200 reference standard compliance.
36501J12NJTDG
GENERAL PURPOSE INDUCTOR; Inductor Application: RF INDUCTOR; No. of Terminals: 2; Shielded: NO; Surface Mount: YES; Maximum Operating Temperature: 125 Cel;
NRS4018T6R8MDGJ
Taiyo Yuden's NRS4018T6R8MDGJ is a fixed inductor with 6.8uH nominal inductance, 1.45A max current, and 30MHz self-resonance freq. Ideal for power applications, it features dual-ended terminals, SMT package style, and ferrite core material.
B82793-S513-N201
The TDK B82793-S513-N201 is a surface mount fixed inductor with 51uH nominal inductance and 0.8A max rated current. It is a general-purpose filter choke suitable for various applications, featuring dual in-line terminal placement and a compact rectangular package measuring 7.1mm x 6mm x 4.9mm.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
LQP15MN8N2B02D
Murata Manufacturing
Murata Manufacturing's LQP15MN8N2B02D is a chip inductor with 0.0082 uH nominal inductance, 1.1 ohm DC resistance, and 5500 MHz self-resonance frequency. Ideal for RF applications, this SMT inductor has dual-ended terminals and operates b/w -40 to 85 °C.
LQP15MN10NG02D
LQP15MN10NG02D by Murata is a chip inductor with 0.01uH nominal inductance, 1.3 ohm DC resistance, and 13 min quality factor at 500 MHz. It is used as an RF inductor for general purpose applications requiring a self-resonance frequency of 4500 MHz. The dual-ended terminal placement and compact 0402 size make it suitable for surface mount installations.
LQP15MN3N9B02D
LQP15MN4N7B02D
Murata Manufacturing's LQP15MN4N7B02D is a 0402 chip inductor with 0.0047 uH nominal inductance, 6000 MHz self-resonance frequency, and 0.6 ohm DC resistance. It is a dual-ended surface mount RF inductor suitable for general purpose applications.
LQP15MN1N0W02D
LQP15MN6N8B02D
LQP15MN1N2B02D
LQP15MN5N1B02D
LQP15MN2N5W02D
LQP15MN1N7W02D
LQP15MN1N7W02D by Murata Manufacturing is a surface mount fixed inductor with a nominal inductance of 0.0017 uH. It has a max rated current of 0.28 A and operates at temperatures ranging from -40 to 85 °C. This general purpose inductor is commonly used in RF applications.
LQP15MN3N0B02D
LQP15MN3N0B02D by Murata Manufacturing is a surface mount fixed inductor with dual-ended terminal placement. It has a nominal inductance of 0.003 uH and a max rated current of 0.19 A. This general purpose inductor is commonly used in RF applications.
LQP15MN1N1W02D
LQP15MN3N3B02D
LQP15MN3N5W02D
LQP15MN2N7B02D
The Murata Manufacturing LQP15MN2N7B02D is a chip inductor with 0.0027 uH nominal inductance, 6000 MHz self-resonance frequency, and 85 °C max operating temperature. It is a surface-mount RF inductor ideal for general purpose applications requiring high quality factor and low DC resistance.
LQP15MN33NG02D
LQP15MN33NG02D by Murata Manufacturing is a surface mount fixed inductor with a nominal inductance of 0.033 uH. It has a max rated current of 0.06 A and operates at temperatures ranging from -40 to 85 °C. This general purpose inductor is commonly used in RF applications.
LQP15MN3N6B02D
LQP15MN3N6B02D by Murata Manufacturing is a surface mount fixed inductor with dual-ended terminal placement. It has a test frequency of 500 MHz and a nominal inductance of 0.0036 uH. This general purpose inductor is commonly used in RF applications.
LQP15MN1N8B02D
LQP15MN6N2B02D
LQP15MN4N3B02D
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved