Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Murata Manufacturing's LQM21NN4R7K10L is an 0805 SMT inductor with 4.7uH nominal inductance, suitable for RF applications. It features a max operating temperature of 85°C, self-resonance frequency of 47MHz, and ferrite core material. Ideal for general purpose use with a Q factor of at least 45 at the test frequency of 10MHz.
Median Price
$0.086
Lifecycle Status
Suppliers In-Stock
24
In-Stock Inventory
1k+
Arrow
1+ parts
$0.079
100+ parts
-
1k+ parts
10k+ parts
DigiKey
$0.260
$0.157
$0.110
$0.100
TTI Europe
$0.076
Chip1Stop
Verical
$0.085
$0.078
Farnell
$0.133
Element14
$0.208
$0.146
Freelance Electronics
$0.039
$0.041
$0.038
Nova Conductors
$0.121
TME
$0.257
$0.148
$0.114
$0.084
Cyclops Electronics Ltd
Bristol Electronics
$0.263
$0.105
$0.071
ComSIT Distribution GmbH
PC Components Company LLC
Vyrian
Prism Electronics
Semi Source
Sea View Technologies
A2Z Electronics, Inc.
Rutronik
$0.055
Dan-Mar Components
EPE Components Inc.
Rebound Electronics
EMSNET
Semicontronic
$0.043
$0.042
Aranea Global
$0.118
$0.113
Argo Parts USA
$0.117
Continental Prestige Electronics
Advanced Electronics
$0.535
$0.508
Corohmni
$0.598
Modulus Dynamics
$0.619
Aztec Data Supply Inc.
$0.970
Eastek
$0.060
Alle Elektronik GmbH
iodParts Technologies Inc.
Cyclops Electronics Ltd (Excess)
Robosynatics
Lucentia Tech
$0.447
Surface mount design allows for easy and convenient installation on PCBs, saving space and reducing assembly time.
Shielded construction helps to prevent interference and ensures optimal performance in high-frequency applications.
Dual-ended terminal placement offers flexibility in circuit design and allows for easy connection.
Tested at a high frequency of 10 MHz for accurate and reliable performance in RF applications.
Provides a suitable level of inductance for RF circuits, ensuring proper signal filtering and impedance matching.
Low DC resistance helps to minimize power losses and improve overall efficiency of the circuit.
Can operate at high temperatures of up to 85°C without compromising performance or reliability.
Capable of handling a maximum rated current of 0.03 A, suitable for a wide range of RF applications.
Fixed Inductors LQM21NN4R7K10L attributes and parameters. Explore more Fixed Inductors devices from Murata Manufacturing
Inductor Type:
Inductor Application:
Nominal Inductance:
Maximum Rated Current:
Minimum Quality Factor (at L-nom):
DC Resistance:
Tolerance:
No. of Functions:
Self Resonance Frequency:
Test Frequency:
Special Feature:
Package Shape:
Case or Size Code:
Shielded:
Construction:
Core Material:
Surface Mounted:
Minimum Operating Temperature:
Maximum Operating Temperature:
Terminal Position:
Terminal Shape:
Terminal Finish:
No. of Terminals:
Package Style:
Package Length:
Package Height:
Package Width:
Packing Method:
JESD-609 Code:
LQM21NN4R7K10L Inductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8504.50.80.00
SB
8504.50.00.00
Murata Manufacturing Co., Ltd. is a Japanese electronics manufacturer founded in 1944 by Akira Murata. Through its expansive supply chain network and innovative product portfolio, Murata designs and manufactures a wide variety of electronic components including capacitors, inductor coils, buzzers, sensors and more for applications in the automotive, medical, industrial and consumer sectors. Based in Nagaokakyo City in Kyoto Prefecture of Japan, Murata operates factories around the world with other facilities located throughout Asia Pacific region such as China and Thailand; North America; Europe; Latin America; Middle East & Africa; as well as Oceania.
Chairman of the Board
Tsuneo Murata
President
Norio Nakajima
Senior Executive VP, Board Member
Hiroshi Iwatsubo
Murata Integrated Passive Solution
Fabrication
Fab Initiation
1989
France
Caen
Wafer Capacity
12,500
Sendai Fab
2008
Japan
Sendai
20,000
Kanazawa - Fab 2
2016
Hakusan
10,000
Komoro
1980
Yasu Plant
1987
Yasu
14,500
Kanazawa Plant
1985
5,000
Vantaa - Fab 1
1998
Finland
Vantaa
Vantaa - Fab 2
2006
12,000
2N2222A
Vpt Components
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 1 W; Maximum Collector Current (IC): .8 A; Maximum Power Dissipation Ambient: .5 W;
ULN2803A
Allegro MicroSystems
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Maximum Operating Temperature: 85 Cel; Terminal Form: THROUGH-HOLE;
LL4148
Onsemi
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
2902037
Phoenix Contact
MODULAR TERMINAL BLOCK;
M39029/56-351
Itt Cannon
CONNECTOR ACCESSORY; MIL Conformity: YES; Terminal Type: WIRE; IEC Conformity: NO; Alternate Contact Sources: ITT CANNON; Associated Military - Specifications: MIL-C-38999;
BAV99W-7-F
Diodes Incorporated
Diodes Incorporated BAV99W-7-F is a fast recovery rectifier diode with 2 elements in series connected, center tap configuration. It has a max reverse recovery time of 0.004 us and can handle a max output current of 0.15 A. Ideal for applications requiring fast switching capabilities and operating temperatures ranging from -65 to 150 °C.
DS18B20Z+
Maxim Integrated
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Body Width: 3.9 inch; Maximum Supply Voltage: 5.5 V;
08055C104KAT4A
KYOCERA AVX
08055C104KAT4A by KYOCERA AVX is a ceramic capacitor with 0.1uF capacitance, rated for 50V. With X7R temperature characteristics and -55 to 125 °C operating range, it's ideal for SMT applications requiring compact size and high reliability. The wraparound terminals and multi-layer design make it suitable for various electronic circuits.
BSS123-7-F
BSS123-7-F by Diodes Inc. is a N-channel FET with 100V DS breakdown voltage and 0.17A drain current. Ideal for switching applications, it features a single configuration with built-in diode, operates in enhancement mode, and has a max power dissipation of 0.3W.
LM358DT
STMicroelectronics
LM358DT by STMicroelectronics is a dual operational amplifier with a max input offset voltage of 9000 uV. It operates at a nominal voltage of 5V and has a min voltage gain of 25000. This amplifier is commonly used in applications requiring high precision and low power consumption.
Crimson Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
M85049/85-08W02
Glenair
CONNECTOR ACCESSORY; MIL Conformity: YES; Material: ALUMINIUM ALLOY; Associated Backshell Military - Specifications: MIL-DTL-38999; Shell Sizes: 08; DIN Conformity: NO;
M24308/2-1F
Cinch Connectivity Solutions
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1750VAC; No. of Connectors: ONE; Body Depth: .375 inch;
2N7002
Panjit International
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Time At Peak Reflow Temperature (s): 40; Minimum DS Breakdown Voltage: 60 V;
LM555CN
Intersil
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
Vishay Siliconix
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; No. of Elements: 1; Terminal Form: GULL WING; Qualification: Not Qualified;
OPA2277UA
Texas Instruments
OPA2277UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 100 uV and micropower consumption of 1.65 mA. Ideal for industrial applications, it offers high common mode rejection ratio of 140 dB and unity gain bandwidth of 1000 kHz in a small outline package.
LM317T
Tt Electronics Plc
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Qualification Status: Not Qualified; JESD-30 Code: R-PSFM-T3;
NC7WZ07P6X
The Onsemi NC7WZ07P6X is a logic gate with 2 functions, featuring a propagation delay of 4.8 ns at 1.8V supply voltage. With open-drain output characteristics, it operates in industrial temperatures from -40 to 85°C. Ideal for applications requiring fast signal processing and low power consumption in compact designs.
1N4148
Grande Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
B82734R2132B030
TDK
B82734R2132B030 by TDK is a fixed inductor with 47000 uH nominal inductance, suitable for power applications. It has a max rated current of 1.3 A and operates b/w -40 to 125 °C, featuring a rectangular package style for PCB mount. Ideal for general purpose use, this inductor offers low DC resistance at 0.56 ohm and is constructed with ferrite core material.
IHLP4040DZER220M11
Vishay Intertechnology
Vishay Intertechnology's IHLP4040DZER220M11 is a shielded, surface mount inductor with 22uH nominal inductance and 5A max rated current. Ideal for high current applications, this rectangular package inductor has a DC resistance of 0.066 ohm and operates b/w -55°C to 125°C.
UP2B-470-R
Cooper Electronic Technologies
GENERAL PURPOSE INDUCTOR; Inductor Application: POWER INDUCTOR; No. of Terminals: 2; Shielded: NO; Surface Mount: YES; No. of Functions: 1;
DR127-1R0-R
Cooper Industries
GENERAL PURPOSE INDUCTOR; Inductor Application: POWER INDUCTOR; No. of Terminals: 2; Package Style (Meter): SMT; Shielded: YES; Surface Mount: YES;
IHLP2020CZER220M11
Vishay Intertechnology's IHLP2020CZER220M11 is a shielded, surface mount fixed inductor with 22uH nominal inductance and 2.12A max rated current. Ideal for high current applications, this rectangular package inductor operates b/w -55°C to 125°C with a DC resistance of 0.27 ohm.
B82791H2301N001
B82791H2301N001 by TDK is a fixed inductor with 30000 uH nominal inductance, 2.2 ohm DC resistance, and 0.3 A max rated current. It is a power inductor designed for general purpose applications, featuring a rectangular package style for PCB mount with dual in-line terminals. Operating temperature ranges from -40 to 125 °C.
SRR6603-100ML
Bourns
The Bourns SRR6603-100ML is a shielded, surface mount fixed inductor with 10uH nominal inductance and 1A max rated current. Ideal for power applications, it operates b/w -55°C to 125°C with a self-resonance frequency of 38MHz.
DRA124-8R2-R
Eaton Corporation
DRA124-8R2-R by Eaton Corp is a shielded fixed inductor with 8.2uH nominal inductance, ideal for general purpose applications. With a max operating temp of 165°C and rated current of 6.7A, it offers reliable performance in various electronic circuits requiring high-quality components.
DR74-151-R
Coiltronics
74438335220
Wuerth Elektronik & Kg
Wurth Elektronik 74438335220 is a shielded, dual-ended fixed inductor with 22uH nominal inductance. Ideal for power applications, it has a max rated current of 0.6A and operates b/w -40 to 125°C. Its compact SMT package measures 3x3x1.5mm and features an iron alloy core with self-resonance frequency of 12MHz.
HC2LP-4R7-R
HC2LP-4R7-R by Eaton Corp is a fixed inductor with 4.7uH nominal inductance, suitable for power applications. It features dual-ended terminals, wraparound shape, and operates b/w -40 to 85°C. This general-purpose inductor has a DC resistance of 0.0046 ohm and uses ferrite core material for efficient performance.
2300LL-101-H-RC
Bourns 2300LL-101-H-RC is a fixed inductor with 100uH nominal inductance, 7.8A max current, and 0.027 ohm DC resistance. Ideal for high current applications, it features radial terminal placement and horizontal mount construction in a cylindrical toroidal package.
B82732F2451B001
The TDK B82732F2451B001 is a general purpose inductor with 100000 uH nominal inductance, 2.93 ohm DC resistance, and 0.45 A max rated current. It is used as a power inductor for various applications due to its ferrite core material and dual in-line terminal placement.
LL1608-FH68NJ
Toko
LL1608-FH68NJ by Toko is a 0603 fixed inductor with 0.068 uH nominal inductance, suitable for RF applications. It has dual-ended terminals, WRAPAROUND shape, and operates at -40 to 100 °C. With a self-resonance frequency of 1050 MHz and ceramic core material, it's ideal for general purpose use.
XFL2006-333MEC
Coilcraft
Coilcraft XFL2006-333MEC is a shielded SMT inductor with 33uH nominal inductance, 4.9 ohm DC resistance, and 24 MHz self-resonance frequency. Ideal for power applications, it operates b/w -40 to 85°C with a max current of 0.205A.
LQP15MN10NG02D
Murata Manufacturing
LQP15MN10NG02D by Murata is a chip inductor with 0.01uH nominal inductance, 1.3 ohm DC resistance, and 13 min quality factor at 500 MHz. It is used as an RF inductor for general purpose applications requiring a self-resonance frequency of 4500 MHz. The dual-ended terminal placement and compact 0402 size make it suitable for surface mount installations.
CTIHLP5024F-100M
Central Technologies
CTIHLP5024F-100M by Central Technologies is a shielded, surface mount fixed inductor with 10uH nominal inductance and 10A max rated current. Ideal for power applications, it has dual-ended terminals and operates b/w -55°C to 125°C.
3613C101K
Tyco Electronics Components
GENERAL PURPOSE INDUCTOR; Inductor Application: RF INDUCTOR; No. of Terminals: 2; Shielded: NO; Surface Mount: YES; Terminal Shape: WRAPAROUND;
1277AS-H-1R0M=P2
1277AS-H-1R0M=P2 by Murata is a shielded, dual-ended fixed inductor with 1uH nominal inductance. Ideal for power applications, it has a max rated current of 3.1A and operates b/w -40°C to 85°C. Its compact SMT package measures 3.2mm x 2.5mm x 1.2mm, making it suitable for general purpose inductor needs.
GENERAL PURPOSE INDUCTOR; Inductor Application: POWER INDUCTOR; No. of Terminals: 2; Package Style (Meter): SMT; Shielded: NO; Surface Mount: YES;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
LQM21PHR47NG0D
Murata Manufacturing's LQM21PHR47NG0D is an 0805 SMT fixed inductor with 0.47uH nominal inductance, 1.3A max current, and -55 to 150°C operating temp. Ideal for power applications, it features dual-ended terminals and ferrite core material.
LQM2HPN2R2MG0L
LQM2HPN2R2MG0L by Murata is a shielded, surface mount fixed inductor with 2.2uH nominal inductance and 1.3A max rated current. It is a general-purpose RF inductor suitable for applications requiring high-frequency performance and compact size, featuring a multilayer chip construction and ferrite core material.
LQM21PHR54NG0D
LQM21PN1R0MC0D
LQM21PN1R0MC0D by Murata is a shielded, surface mount fixed inductor with 1uH nominal inductance and 0.8A max rated current. Ideal for RF applications, it features dual-ended terminals, operates b/w -55°C to 125°C, and has a self-resonance frequency of 90MHz.
LQM21NNR68K10D
Murata Manufacturing's LQM21NNR68K10D is an 0805 fixed inductor with 0.68uH nominal inductance, suitable for RF applications. It features a max operating temperature of 85°C, 0.15A rated current, and Q measured at 25MHz. This shielded SMT inductor has a ferrite core and wraparound terminals.
LQM21FN100M70L
GENERAL PURPOSE INDUCTOR; Inductor Application: RF INDUCTOR; No. of Terminals: 2; Package Style (Meter): SMT; Shielded: YES; Surface Mount: YES;
LQM21DN150M70L
Murata Manufacturing's LQM21DN150M70L is an 0805 fixed inductor with 15uH nominal inductance, suitable for power applications. It has a max operating temperature of 125°C, rated current of 0.25A, and self-resonance frequency of 24MHz. This shielded SMT inductor features dual-ended terminals and ferrite core material.
LQM2MPN2R2NG0L
Murata Manufacturing's LQM2MPN2R2NG0L is a shielded, surface mount fixed inductor with 2.2uH nominal inductance and 1.2A max rated current. Ideal for power applications, this general purpose inductor has a compact 0806 size and operates b/w -55 to 125 °C, featuring a ferrite core and wraparound terminals.
LQM21FN100M80L
LQM21FN100N00L
LQM2HPN4R7MG0L
LQM21PN1R0MGHL
LQM21PN2R2MC0D
LQM2HPN4R7MGCL
LQM21NNR56K10D
LQM2HPN1R0MG0L
LQM2HPN1R0MG0L by Murata Manufacturing is a surface mount, shielded fixed inductor with a nominal inductance of 1 uH. It is a general purpose inductor suitable for RF applications, with a max rated current of 1.6 A and a self-resonance frequency of 60 MHz.
LQM21PN2R2MGHL
Murata Manufacturing's LQM21PN2R2MGHL is an 0805 SMT fixed inductor with 2.2uH nominal inductance, ideal for power applications. With a max rated current of 1.3A and operating temperature range from -40 to 85°C, it offers high performance and reliability. The shielded dual-ended inductor features ferrite core material and WRAPAROUND terminals for efficient power handling at a self-resonance frequency of 40MHz.
LQM21PN3R3MG0D
LQM21NN1R5K10D
LQM21NN4R7K10J
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved