Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Murata Manufacturing's LQM21PN3R3MG0D is an 0805-sized, shielded, surface mount inductor with 3.3uH nominal inductance and 0.8A max rated current. Ideal for RF applications, this general purpose chip inductor has a self-resonance frequency of 30MHz and operates b/w -55°C to 125°C.
Median Price
$0.170
Lifecycle Status
Suppliers In-Stock
4
In-Stock Inventory
1k+
DigiKey
1+ parts
100+ parts
$0.117
1k+ parts
$0.096
10k+ parts
-
Mouser Electronics
$0.076
Nova Conductors
$0.097
Vyrian
Argo Parts USA
$0.094
Continental Prestige Electronics
$0.095
Corohmni
$0.108
Semicontronic
$0.187
$0.182
$0.181
Aztec Data Supply Inc.
$0.490
Authorized Procurement Solutions
The surface mount capability makes it easy to install and saves space on a circuit board.
The shielding helps to reduce electromagnetic interference, making it suitable for sensitive applications.
Dual ended terminal placement allows for easy connection in a circuit.
Tested at a high frequency of 1 MHz to ensure accurate performance in RF applications.
Offers a medium inductance value suitable for general purpose inductor applications.
Withstands high temperatures, ensuring reliable operation in various environments.
Capable of handling a maximum rated current of 0.8 A, making it suitable for various circuits.
Can operate in low-temperature conditions without performance degradation.
Designed as a general-purpose inductor, suitable for a wide range of applications.
Low DC resistance helps in minimizing power losses and efficiency of the circuit.
Ferrite core material provides high inductance and is suitable for RF applications.
Fixed Inductors LQM21PN3R3MG0D attributes and parameters. Explore more Fixed Inductors devices from Murata Manufacturing
Inductor Type:
Inductor Application:
Nominal Inductance:
Maximum Rated Current:
DC Resistance:
Tolerance:
No. of Functions:
Self Resonance Frequency:
Test Frequency:
Special Feature:
Package Shape:
Case or Size Code:
Shielded:
Construction:
Core Material:
Surface Mounted:
Minimum Operating Temperature:
Maximum Operating Temperature:
Terminal Position:
Terminal Shape:
Terminal Finish:
No. of Terminals:
Package Style:
Package Length:
Package Height:
Package Width:
Packing Method:
JESD-609 Code:
LQM21PN3R3MG0D Inductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8504.50.80.00
SB
8504.50.00.00
Murata Manufacturing Co., Ltd. is a Japanese electronics manufacturer founded in 1944 by Akira Murata. Through its expansive supply chain network and innovative product portfolio, Murata designs and manufactures a wide variety of electronic components including capacitors, inductor coils, buzzers, sensors and more for applications in the automotive, medical, industrial and consumer sectors. Based in Nagaokakyo City in Kyoto Prefecture of Japan, Murata operates factories around the world with other facilities located throughout Asia Pacific region such as China and Thailand; North America; Europe; Latin America; Middle East & Africa; as well as Oceania.
Chairman of the Board
Tsuneo Murata
President
Norio Nakajima
Senior Executive VP, Board Member
Hiroshi Iwatsubo
Murata Integrated Passive Solution
Fabrication
Fab Initiation
1989
France
Caen
Wafer Capacity
12,500
Sendai Fab
2008
Japan
Sendai
20,000
Kanazawa - Fab 2
2016
Hakusan
10,000
Komoro
1980
Yasu Plant
1987
Yasu
14,500
Kanazawa Plant
1985
5,000
Vantaa - Fab 1
1998
Finland
Vantaa
Vantaa - Fab 2
2006
12,000
OPA2227UA
Texas Instruments
OPA2227UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 200 uV and bias current of 0.01 uA. It operates at temperatures ranging from -40 to 85 °C, making it suitable for industrial applications requiring precise signal amplification. With a unity gain bandwidth of 8000 kHz, this op amp is ideal for high-frequency circuit designs.
M39029/58-360
Carlisle Interconnect Technologies
GENERAL CONN ACCESSORY; Associated Military - Specifications: MIL-C-55302/69, MIL-C-38999; Maximum Operating Temperature: 200 Cel; MIL-Connector Accessory: CONTACT; Terminal Type: CRIMP; MIL Conformity: YES;
Tri-star Electronics International
CONNECTOR ACCESSORY; Material: COPPER ALLOY; MIL Conformity: YES; Associated Military - Specifications: MIL-C-55302/69, MIL-C-38999; MIL-Connector Accessory Name: CONTACT; Terminal Type: CRIMP;
1N4148
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Surface Mount: NO; Config: SINGLE; Peak Reflow Temperature (C): 260; No. of Phases: 1; Diode Element Material: SILICON;
LM555CN
National Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
2N7002
Bytesonic Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Terminal Position: DUAL; Minimum Operating Temperature: -55 Cel;
SS14
Vishay Semiconductors
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
Raytheon Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Minimum DC Current Gain (hFE): 100; Maximum Turn On Time (ton): 35 ns;
BAV99
Taitron Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
SS495ASP
Micro Switch
The Micro Switch SS495ASP is an analog circuit IC with a supply voltage range of 4.5V to 10.5V, suitable for automotive applications. Its package body material is plastic/epoxy, and it has a rectangular shape with three terminals. Operating temperature ranges from -40°C to 125°C, making it ideal for various automotive sensor and control systems.
Lite-on Technology
RECTIFIER DIODE; Surface Mount: YES; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Operating Temperature: 175 Cel; Maximum Output Current: .1 A; Maximum Reverse Recovery Time: .006 us;
Vishay Intertechnology
2N7002 by Vishay Intertechnology is a N-CHANNEL FET with 60V DS Breakdown Voltage, 0.115A Drain Current, and 7.5 ohm On Resistance. Ideal for SWITCHING applications due to its SINGLE configuration with BUILT-IN DIODE. Operates in ENHANCEMENT MODE, suitable for surface mount with GULL WING terminals.
M85049/85-08W02
TE Connectivity
CONNECTOR ACCESSORY; Minimum Operating Temperature: -65 Cel; Wire Gauge (AWG): 0; Maximum Wire Size: 0 AWG; Maximum Operating Temperature: 175 Cel; Material: ALUMINUM ALLOY;
M24308/2-1F
Souriau
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Body or Shell Style: RECEPTACLE; MIL Conformity: YES;
LM317LMX/NOPB
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; Maximum Seated Height: 1.75 mm; Nominal Dropout Voltage-1: 3 V;
1N4148WS
Daco Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Taiwan Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Promax-johnton
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358MX
Fairchild Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
ULN2803A
Allegro MicroSystems
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Maximum Operating Temperature: 85 Cel; Terminal Form: THROUGH-HOLE;
ASMPH-0603-1R0M-T
Abracon
Abracon's ASMPH-0603-1R0M-T is a shielded, surface mount fixed inductor with 1uH nominal inductance and 1A max rated current. Ideal for power applications, it features dual-ended terminals, ferrite core material, and operates b/w -55°C to 125°C.
BWVS005050404R7M00
Pulse Electronics
GENERAL PURPOSE INDUCTOR; Inductor Application: POWER INDUCTOR; No. of Terminals: 2; Package Style (Meter): SMT; Shielded: YES; Surface Mount: YES;
MLP2520S4R7ST0S1
TDK
TDK's MLP2520S4R7ST0S1 is a shielded, surface mount fixed inductor with 4.7uH nominal inductance and 1A max rated current. Ideal for power applications, it features dual-ended terminals, ferrite core material, and operates b/w -40 to 125°C temperature range.
IHLP1212BZER2R2M11
Vishay Intertechnology's IHLP1212BZER2R2M11 is a shielded, surface mount fixed inductor with 2.2uH nominal inductance and 3A max rated current. Ideal for high current applications, this rectangular package inductor operates b/w -55°C to 125°C with a self-resonance frequency of 55MHz.
CTX100-1-52LP-R
Eaton Corporation
CTX100-1-52LP-R by Eaton Corp is a fixed inductor with 100uH nominal inductance, 2.5A max current, and -40 to 75°C operating range. Ideal for power applications, it features radial terminals, iron core material, and cylindrical toroidal package style.
DR125-4R7-R
Cooper Industries
ETQP5M4R7YFC
Panasonic
Panasonic ETQP5M4R7YFC is a shielded, dual-ended fixed inductor with 4.7uH nominal inductance and 13.1A max rated current. Ideal for power applications, it features wraparound terminals, metal composite core material, and operates b/w -40 to 150°C.
7447709100
Wuerth Elektronik & Kg
Wurth Elektronik 7447709100 is a shielded fixed inductor with 10uH nominal inductance, 7.1A max current, and 21MHz self-resonance freq. Ideal for power applications, it features dual-ended terminals, SMT package style, and operates b/w -40 to 125°C.
IHLP2525CZER3R3M01
Vishay Intertechnology's IHLP2525CZER3R3M01 is a shielded, surface mount inductor with 3.3uH nominal inductance and 6A max rated current. Ideal for high current applications, this rectangular package features dual-ended terminals and operates b/w -55°C to 125°C.
IHLP1616BZER4R7M11
Vishay Intertechnology's IHLP1616BZER4R7M11 is a shielded, high current inductor with 4.7uH nominal inductance and 1.7A max rated current. Ideal for general purpose applications, this SMT inductor has a compact 1616 case size and operates b/w -55°C to 125°C temperature range.
CVH252009-2R2M
Bourns
Bourns CVH252009-2R2M is a shielded, surface mount fixed inductor with 2.2uH nominal inductance and 1.3A max current rating. Ideal for power applications, it features a 1008 size code, ferrite core material, and operates b/w -55°C to 125°C temperature range.
B82477G4333M000
B82477G4333M000 by TDK is a shielded, surface mount fixed inductor with 33uH nominal inductance and 3A max rated current. Ideal for power applications, it features dual-ended terminals, operates b/w -55°C to 125°C, and has a compact 5050 case size.
B78108S1222K000
B78108S1222K000 by TDK is a 2.2uH general purpose inductor with 1A max current, 140MHz self-resonance freq, and -55 to 125°C operating temp range. Ideal for RF applications due to its high Q factor at 7.96MHz, this axial inductor features a tubular package design with tin finish terminals.
SRN8040-220M
Bourns SRN8040-220M is a shielded, surface mount inductor with 22uH nominal inductance and 2.2A max rated current. Ideal for power applications, it operates b/w -40 to 125°C with a self-resonance frequency of 12MHz.
74479777310A
Wurth Elektronik 74479777310A is an 0805 SMT fixed inductor with 10uH nominal inductance, 0.9A max current, and -40 to 125°C operating temp. Ideal for power applications due to its shielded construction and dual-ended terminals.
MAKK2016T3R3M
Taiyo Yuden
MAKK2016T3R3M by Taiyo Yuden is a fixed inductor with 3.3uH nominal inductance, 1.15A max current, and -40 to 105°C operating range. Ideal for power applications, this SMT inductor features dual-ended terminals and metal core construction for efficient performance.
IHLP5050FDER4R7M01
Vishay Intertechnology's IHLP5050FDER4R7M01 is a shielded fixed inductor with 4.7uH nominal inductance, 13.5A max current, and 0.0087 ohm DC resistance. Ideal for power applications, it features dual-ended terminals and operates b/w -55°C to 125°C. Suitable for SMT mounting, this general purpose inductor has a compact 5050 case size.
CM322522-R47ML
Bourns CM322522-R47ML is a surface mount fixed inductor with 0.47uH nominal inductance, 125°C max operating temp, and 30 min quality factor. Ideal for RF applications, this general purpose inductor features dual-ended terminals, J bend shape, and ferrite core material.
DR127-220-R
Eaton Corporation's DR127-220-R is a shielded, surface mount fixed inductor with 22uH nominal inductance and 4A max rated current. Ideal for power applications, this general purpose inductor has a dual-ended terminal placement and operates b/w -40°C to 125°C.
DR125-101-R
Cooper Electronic Technologies
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
LQM21PHR47NG0D
Murata Manufacturing
Murata Manufacturing's LQM21PHR47NG0D is an 0805 SMT fixed inductor with 0.47uH nominal inductance, 1.3A max current, and -55 to 150°C operating temp. Ideal for power applications, it features dual-ended terminals and ferrite core material.
LQM2HPN2R2MG0L
LQM2HPN2R2MG0L by Murata is a shielded, surface mount fixed inductor with 2.2uH nominal inductance and 1.3A max rated current. It is a general-purpose RF inductor suitable for applications requiring high-frequency performance and compact size, featuring a multilayer chip construction and ferrite core material.
LQM21PHR54NG0D
LQM21PN1R0MC0D
LQM21PN1R0MC0D by Murata is a shielded, surface mount fixed inductor with 1uH nominal inductance and 0.8A max rated current. Ideal for RF applications, it features dual-ended terminals, operates b/w -55°C to 125°C, and has a self-resonance frequency of 90MHz.
LQM21NNR68K10D
Murata Manufacturing's LQM21NNR68K10D is an 0805 fixed inductor with 0.68uH nominal inductance, suitable for RF applications. It features a max operating temperature of 85°C, 0.15A rated current, and Q measured at 25MHz. This shielded SMT inductor has a ferrite core and wraparound terminals.
LQM21FN100M70L
GENERAL PURPOSE INDUCTOR; Inductor Application: RF INDUCTOR; No. of Terminals: 2; Package Style (Meter): SMT; Shielded: YES; Surface Mount: YES;
LQM21DN150M70L
Murata Manufacturing's LQM21DN150M70L is an 0805 fixed inductor with 15uH nominal inductance, suitable for power applications. It has a max operating temperature of 125°C, rated current of 0.25A, and self-resonance frequency of 24MHz. This shielded SMT inductor features dual-ended terminals and ferrite core material.
LQM2MPN2R2NG0L
Murata Manufacturing's LQM2MPN2R2NG0L is a shielded, surface mount fixed inductor with 2.2uH nominal inductance and 1.2A max rated current. Ideal for power applications, this general purpose inductor has a compact 0806 size and operates b/w -55 to 125 °C, featuring a ferrite core and wraparound terminals.
LQM21NN4R7K10L
LQM21FN100M80L
LQM21FN100N00L
LQM2HPN4R7MG0L
LQM21PN1R0MGHL
LQM21PN2R2MC0D
LQM2HPN4R7MGCL
LQM21NNR56K10D
LQM2HPN1R0MG0L
LQM2HPN1R0MG0L by Murata Manufacturing is a surface mount, shielded fixed inductor with a nominal inductance of 1 uH. It is a general purpose inductor suitable for RF applications, with a max rated current of 1.6 A and a self-resonance frequency of 60 MHz.
LQM21PN2R2MGHL
Murata Manufacturing's LQM21PN2R2MGHL is an 0805 SMT fixed inductor with 2.2uH nominal inductance, ideal for power applications. With a max rated current of 1.3A and operating temperature range from -40 to 85°C, it offers high performance and reliability. The shielded dual-ended inductor features ferrite core material and WRAPAROUND terminals for efficient power handling at a self-resonance frequency of 40MHz.
LQM21NN1R5K10D
LQM21PN3R3MG0B
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved