Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Murata Manufacturing's LQP15MN1N0B02D is a chip inductor with 0.001uH nominal inductance, 500 MHz test frequency, and 10% tolerance. Ideal for RF applications, this SMT inductor has dual-ended terminals and operates b/w -40 to 85 °C with a max current of 0.4A.
Median Price
$0.067
Lifecycle Status
Suppliers In-Stock
23
In-Stock Inventory
1k+
Avnet
1+ parts
$0.181
100+ parts
-
1k+ parts
10k+ parts
$0.167
TTI Europe
$0.045
Chip1Stop
$0.037
$0.034
Voyager Components
$0.150
Chip Stock
Netsource Technology, Inc.
Sensible Micro Corp
Bristol Electronics
Q Components
Prism Electronics
PC Components Company LLC
M&R Communications
Goldney Electronics S.L.
ACDS - Activité Composants Distribution Service
Sea View Technologies
J2 Sourcing AB
Velocity Electronics
Vyrian
Legend Electronics Inc.
Martec Srl
ComSIT Distribution GmbH
Nova Conductors
Semtec, LLC
Corohmni
$0.131
AZTECH Wire
$13.000
GreenTree Electronics
Legend Electronics Inc. (Excess)
Cyclops Electronics Ltd (Excess)
Alle Elektronik GmbH
Continental Prestige Electronics
$0.024
$0.023
Assy Fe
Netroflash
Being surface mountable makes this inductor easy to install on a PCB, saving space and allowing for automated assembly.
Suitable for high-frequency applications, making it a good choice for RF circuits where high performance is required.
Offers a precise inductance value, ideal for applications where accuracy is crucial.
Can handle a relatively high current, ensuring reliable operation under various load conditions.
High self-resonance frequency indicates good performance at high frequencies, making it suitable for RF applications.
Fixed Inductors LQP15MN1N0B02D attributes and parameters. Explore more Fixed Inductors devices from Murata Manufacturing
Inductor Type:
Inductor Application:
Nominal Inductance:
Maximum Rated Current:
Minimum Quality Factor (at L-nom):
DC Resistance:
Tolerance:
No. of Functions:
Self Resonance Frequency:
Test Frequency:
Special Feature:
Package Shape:
Case or Size Code:
Shielded:
Construction:
Surface Mounted:
Minimum Operating Temperature:
Maximum Operating Temperature:
Terminal Position:
Terminal Shape:
Terminal Finish:
No. of Terminals:
Package Style:
Package Length:
Package Height:
Package Width:
Packing Method:
JESD-609 Code:
LQP15MN1N0B02D Inductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8504.50.80.00
SB
8504.50.00.00
PCN Obsolescence/ EOL - Mult Series 01/Oct/2021
Murata Manufacturing Co., Ltd. is a Japanese electronics manufacturer founded in 1944 by Akira Murata. Through its expansive supply chain network and innovative product portfolio, Murata designs and manufactures a wide variety of electronic components including capacitors, inductor coils, buzzers, sensors and more for applications in the automotive, medical, industrial and consumer sectors. Based in Nagaokakyo City in Kyoto Prefecture of Japan, Murata operates factories around the world with other facilities located throughout Asia Pacific region such as China and Thailand; North America; Europe; Latin America; Middle East & Africa; as well as Oceania.
Chairman of the Board
Tsuneo Murata
President
Norio Nakajima
Senior Executive VP, Board Member
Hiroshi Iwatsubo
Murata Integrated Passive Solution
Fabrication
Fab Initiation
1989
France
Caen
Wafer Capacity
12,500
Sendai Fab
2008
Japan
Sendai
20,000
Kanazawa - Fab 2
2016
Hakusan
10,000
Komoro
1980
Yasu Plant
1987
Yasu
14,500
Kanazawa Plant
1985
5,000
Vantaa - Fab 1
1998
Finland
Vantaa
Vantaa - Fab 2
2006
12,000
LM317T
Analog Devices
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; No. of Functions: 1; Package Body Material: PLASTIC/EPOXY; Surface Mount: NO;
1N4148
Hitano Enterprise
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
M39029/58-360
TE Connectivity
TE Connectivity's M39029/58-360 is a CRIMP terminal backshell for 22-28 AWG wires, rated at 5A. Ideal for male contacts in Mil-Spec applications, it offers a cross-section area of 0.34 mm2 and ensures secure connections in demanding environments.
2N2222A
Silicon Transistor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Continental Device India
BSS138
Panjit International
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3 ohm; Minimum DS Breakdown Voltage: 50 V; Terminal Form: GULL WING;
SMBJ18CA
Leshan Radio
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ISO1050DUBR
Texas Instruments
ISO1050DUBR by Texas Instruments is a network interface IC with 8 terminals, operating from -55 to 105°C. It features a small outline package, nickel palladium gold finish, and gull wing terminal form. Ideal for telecom applications requiring a 5V supply voltage and peak reflow temperature of 260°C.
CC0603KRX7R9BB103
Yageo
Yageo CC0603KRX7R9BB103 is a 0603 SMT ceramic capacitor with capacitance of 0.01uF and rated DC voltage of 50V. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance across temperatures.
FDLL4148
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LP2950CDT-3.3G
Onsemi
LP2950CDT-3.3G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.1A. It has a small outline package style, operates at temperatures ranging from -40 to 125 °C, and is suitable for applications requiring low dropout voltage and precise voltage regulation in electronic circuits.
Motorola
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; No. of Outputs: 1; Package Equivalence Code: SIP3,.1TB;
RC0402FR-0710KL
Yageo's RC0402FR-0710KL is a 10000 ohm SMT fixed resistor with 1% tolerance, suitable for applications requiring a rated power dissipation of 0.0625 W. With a temperature coefficient of 100 ppm/°C, it operates b/w -55 to 155 °C, making it ideal for various electronic circuits.
Tak Cheong Electronics Holdings
USB3320C-EZK-TR
Standard Microsystems
INTERFACE CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 32; Package Code: HVQCCN; Package Shape: SQUARE;
Philips Semiconductors
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Operating Mode: ENHANCEMENT MODE; Maximum Operating Temperature: 150 Cel;
ERJ6ENF10R0V
Panasonic
Panasonic ERJ6ENF10R0V is a 10 ohm fixed resistor with 1% tolerance, suitable for surface mount applications. With a rated power dissipation of 0.125W and operating voltage of 150V, it operates b/w -55°C to 155°C. Its metal glaze/thick film technology ensures stable performance in various electronic circuits.
08055C104KAT4A
KYOCERA AVX
08055C104KAT4A by KYOCERA AVX is a ceramic capacitor with 0.1uF capacitance, rated for 50V. With X7R temperature characteristics and -55 to 125 °C operating range, it's ideal for SMT applications requiring compact size and high reliability. The wraparound terminals and multi-layer design make it suitable for various electronic circuits.
KSZ9031RNXIC
Microchip Technology
KSZ9031RNXIC by Microchip Technology is a network interface chip with 1 transceiver. It operates at a data rate of 1000 Mbps and has a nominal voltage of 1.2V. This chip is commonly used in industrial applications requiring Ethernet connectivity.
LL4148
B82422-T1104-K
TDK
B82422-T1104-K by TDK is a surface mount fixed inductor with 100uH nominal inductance, suitable for RF applications. It has a max operating temperature of 125°C and a self-resonance frequency of 8MHz. This general purpose inductor features dual-ended terminals and a rectangular package design.
IHLP2525CZER6R8M11
Vishay Intertechnology
Vishay Intertechnology's IHLP2525CZER6R8M11 is a shielded, surface mount inductor with 6.8uH nominal inductance and 5.5A max rated current. Ideal for high current applications, this general purpose inductor has a DC resistance of 0.0468 ohm and operates b/w -55°C to 125°C temperature range.
LQW15AN4N3C00D
Murata Manufacturing
Murata Manufacturing's LQW15AN4N3C00D is a wirewound chip inductor with 0.0043uH nominal inductance, suitable for RF applications. Featuring dual-ended terminals and SMT packaging, it operates b/w -55 to 125 °C with a max rated current of 0.75A.
MLZ2012M470WT000
MLZ2012M470WT000 by TDK is an 0805 SMT fixed inductor with 47uH nominal inductance, 3.7ohm DC resistance, and 0.17A max rated current. Ideal for general purpose applications, this shielded inductor operates b/w -55 to 125 °C and features a ferrite core material.
XAL1010-153MED
Coilcraft
Coilcraft XAL1010-153MED is a shielded, dual-ended power inductor with 15uH nominal inductance. It has a max rated current of 13.8A and operates b/w -40 to 125°C. Ideal for general purpose applications requiring high performance and reliability in compact SMT designs.
LPS3015-222MRC
Coilcraft's LPS3015-222MRC is a shielded, dual-ended power inductor with 2.2uH nominal inductance and 1.4A max rated current. Ideal for general purpose applications, this SMT inductor features a ferrite core, operates b/w -40 to 125 °C, and has a self-resonance frequency of 110 MHz.
CBMF1608T100K
Taiyo Yuden
CBMF1608T100K by Taiyo Yuden is a 0603 fixed inductor with 10uH nominal inductance, 0.115A max current, and 32MHz self-resonance freq. Ideal for power applications, it has dual-ended terminals and operates b/w -40 to 105°C.
DFE252012P-1R0M=P2
Murata Manufacturing's DFE252012P-1R0M=P2 is a shielded, surface mount fixed inductor with 1uH nominal inductance and 3.2A max rated current. Ideal for power applications, it operates b/w -40°C to 125°C and features a compact rectangular package (2.5mm x 2mm x 1.2mm).
DR125-100-R
Coiltronics
GENERAL PURPOSE INDUCTOR; Inductor Application: POWER INDUCTOR; No. of Terminals: 2; Package Style (Meter): SMT; Shielded: YES; Surface Mount: YES;
2117-H
Bourns
2117-H by Bourns is a fixed inductor with a nominal inductance of 270 uH and max rated current of 1.8 A. It is a high current inductor suitable for general purpose applications, featuring radial terminal placement and toroid construction. With a DC resistance of 0.21 ohm, it operates b/w -55 to 105 °C temperatures effectively.
HCF1007-3R3-R
Eaton Corporation
HCF1007-3R3-R by Eaton Corp is a surface mount fixed inductor with 3.3uH nominal inductance, 0.0075 ohm DC resistance, and 10% tolerance. It is a general purpose power inductor suitable for applications requiring a max operating temperature of 125°C and min of -40°C. The rectangular package with ferrite core and wraparound terminals make it ideal for various electronic devices.
LQM18PHR47MFRL
Murata Manufacturing's LQM18PHR47MFRL is a shielded, surface mount inductor with 0.47uH nominal inductance and 1.1A max rated current. Ideal for RF applications, this general purpose inductor has a self-resonance frequency of 100MHz and operates b/w -55 to 150°C.
IHLP2020BZER4R7M01
Vishay Intertechnology's IHLP2020BZER4R7M01 is a shielded, surface mount fixed inductor with 4.7uH nominal inductance and 2.8A max rated current. Ideal for high current applications, this rectangular package has a self-resonance frequency of 28MHz and operates b/w -55°C to 125°C.
2209
Jw Miller Magnetics
GENERAL PURPOSE INDUCTOR; Inductor Application: HIGH CURRENT INDUCTOR; No. of Terminals: 2; Shielded: NO; Surface Mount: NO; Maximum Operating Temperature: 105 Cel;
IHLP2020CZER1R5M11
Vishay Intertechnology's IHLP2020CZER1R5M11 is a shielded, high current inductor with 1.5uH nominal inductance and 9A max rated current. Ideal for general purpose applications, this SMT inductor has a self-resonance frequency of 46MHz and operates b/w -55°C to 125°C.
MLZ1608N100LTD25
MLZ1608N100LTD25 by TDK is a shielded, dual-ended fixed inductor with 10uH nominal inductance. Ideal for general purpose applications, it has a max rated current of 0.3A and operates b/w -55 to 125°C. Its compact 0603 size and ferrite core make it suitable for surface mount designs requiring high performance in a small package.
SRR1280-3R3Y
Bourns SRR1280-3R3Y is a shielded, surface mount fixed inductor with 3.3uH nominal inductance and 8.8A max rated current. Ideal for power applications, it features a ferrite core, 30% tolerance, and operates b/w -40 to 125°C temperatures.
SDR1005-101KL
Bourns SDR1005-101KL is a surface mount fixed inductor with 100uH nominal inductance, 1A max current, and 10% tolerance. Ideal for power applications, it operates b/w -40°C to 125°C with a self-resonance frequency of 8MHz.
NR4018T100M
NR4018T100M by Taiyo Yuden is a shielded fixed inductor with 10uH nominal inductance, 0.84A max rated current, and 24MHz self-resonance frequency. It is a power inductor suitable for general purpose applications, featuring dual-ended terminals and ferrite core material. This SMT component has a compact size of 4x4x1.8mm and operates b/w -25°C to 120°C.
UP2B-470-R
Cooper Electronic Technologies
GENERAL PURPOSE INDUCTOR; Inductor Application: POWER INDUCTOR; No. of Terminals: 2; Shielded: NO; Surface Mount: YES; No. of Functions: 1;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
LQP15MN8N2B02D
Murata Manufacturing's LQP15MN8N2B02D is a chip inductor with 0.0082 uH nominal inductance, 1.1 ohm DC resistance, and 5500 MHz self-resonance frequency. Ideal for RF applications, this SMT inductor has dual-ended terminals and operates b/w -40 to 85 °C.
LQP15MN10NG02D
LQP15MN10NG02D by Murata is a chip inductor with 0.01uH nominal inductance, 1.3 ohm DC resistance, and 13 min quality factor at 500 MHz. It is used as an RF inductor for general purpose applications requiring a self-resonance frequency of 4500 MHz. The dual-ended terminal placement and compact 0402 size make it suitable for surface mount installations.
LQP15MN3N9B02D
GENERAL PURPOSE INDUCTOR; Inductor Application: RF INDUCTOR; No. of Terminals: 2; Package Style (Meter): SMT; Shielded: NO; Surface Mount: YES;
LQP15MN4N7B02D
Murata Manufacturing's LQP15MN4N7B02D is a 0402 chip inductor with 0.0047 uH nominal inductance, 6000 MHz self-resonance frequency, and 0.6 ohm DC resistance. It is a dual-ended surface mount RF inductor suitable for general purpose applications.
LQP15MN1N0W02D
LQP15MN6N8B02D
LQP15MN1N2B02D
LQP15MN5N1B02D
LQP15MN2N5W02D
LQP15MN1N7W02D
LQP15MN1N7W02D by Murata Manufacturing is a surface mount fixed inductor with a nominal inductance of 0.0017 uH. It has a max rated current of 0.28 A and operates at temperatures ranging from -40 to 85 °C. This general purpose inductor is commonly used in RF applications.
LQP15MN3N0B02D
LQP15MN3N0B02D by Murata Manufacturing is a surface mount fixed inductor with dual-ended terminal placement. It has a nominal inductance of 0.003 uH and a max rated current of 0.19 A. This general purpose inductor is commonly used in RF applications.
LQP15MN1N1W02D
LQP15MN3N3B02D
LQP15MN3N5W02D
LQP15MN2N7B02D
The Murata Manufacturing LQP15MN2N7B02D is a chip inductor with 0.0027 uH nominal inductance, 6000 MHz self-resonance frequency, and 85 °C max operating temperature. It is a surface-mount RF inductor ideal for general purpose applications requiring high quality factor and low DC resistance.
LQP15MN33NG02D
LQP15MN33NG02D by Murata Manufacturing is a surface mount fixed inductor with a nominal inductance of 0.033 uH. It has a max rated current of 0.06 A and operates at temperatures ranging from -40 to 85 °C. This general purpose inductor is commonly used in RF applications.
LQP15MN3N6B02D
LQP15MN3N6B02D by Murata Manufacturing is a surface mount fixed inductor with dual-ended terminal placement. It has a test frequency of 500 MHz and a nominal inductance of 0.0036 uH. This general purpose inductor is commonly used in RF applications.
LQP15MN1N8B02D
LQP15MN6N2B02D
LQP15MN4N3B02D
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved