Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
CERAMIC BPF; Average Input Power: .5 W; Maximum Operating Temperature: 85 Cel; Maximum No. of Sections: 1; Center/Cutoff Frequency (fo/fc): 5537.5 MHz; Minimum Operating Temperature: -40 Cel;
Median Price
-
Lifecycle Status
Suppliers In-Stock
0
In-Stock Inventory
< 1k
Ceramic Filters LFB185G53CGZE309 attributes and parameters. Explore more Ceramic Filters devices from Murata Manufacturing
Average Input Power:
Center/Cutoff Frequency (fo/fc):
Filter Type:
Height:
I/O Impedance:
Maximum Insertion Loss:
Length:
Mounting Type:
Maximum No. of Sections:
Minimum No. of Sections:
Maximum Operating Temperature:
Minimum Operating Temperature:
Packing Method:
Voltage Standing Wave Ratio:
Width (mm):
Murata Manufacturing Co., Ltd. is a Japanese electronics manufacturer founded in 1944 by Akira Murata. Through its expansive supply chain network and innovative product portfolio, Murata designs and manufactures a wide variety of electronic components including capacitors, inductor coils, buzzers, sensors and more for applications in the automotive, medical, industrial and consumer sectors. Based in Nagaokakyo City in Kyoto Prefecture of Japan, Murata operates factories around the world with other facilities located throughout Asia Pacific region such as China and Thailand; North America; Europe; Latin America; Middle East & Africa; as well as Oceania.
Chairman of the Board
Tsuneo Murata
President
Norio Nakajima
Senior Executive VP, Board Member
Hiroshi Iwatsubo
Murata Integrated Passive Solution
Fabrication
Fab Initiation
1989
France
Caen
Wafer Capacity
12,500
Sendai Fab
2008
Japan
Sendai
20,000
Kanazawa - Fab 2
2016
Hakusan
10,000
Komoro
1980
Yasu Plant
1987
Yasu
14,500
Kanazawa Plant
1985
5,000
Vantaa - Fab 1
1998
Finland
Vantaa
Vantaa - Fab 2
2006
12,000
SMBJ18CA
Jiangsu Jiejie Microelectronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SMMBT2222ALT1G
Onsemi
SMMBT2222ALT1G by Onsemi is a NPN BJT transistor with 3 terminals, 0.6A IC, and 40V VCE. It has a hFE of 75, fT of 300MHz, and operates up to 150°C. Ideal for small signal applications in automotive electronics due to AEC-Q101 compliance.
CRGCQ0805F10K
TE Connectivity
TE Connectivity's CRGCQ0805F10K is a 10000 ohm fixed resistor with 1% tolerance. It operates b/w -55 to 155 °C and has a power dissipation of 0.125 W. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance.
EU2B-YS2J03C
Idec
ROTARY SWITCH;
DS18B20Z
Dallas Semiconductor
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Housing: PLASTIC; Maximum Accuracy (Cel): 0.50;
PIC18F4550-I/ML
Microchip Technology
The Microchip Technology PIC18F4550-I/ML is an 8-bit microcontroller with a max clock frequency of 48 MHz. It features 13-Ch 10-Bit ADC channels and USB connectivity, making it ideal for industrial applications requiring high-speed data processing and analog-to-digital conversion. With low power mode and flash ROM programmability, this chip offers efficient performance in compact designs.
LM317TG
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Minimum Input-Output Voltage Differential: 3 V; Qualification Status: Not Qualified; No. of Functions: 1;
2N2222A
Zetex Plc
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LM317T
Micro Commercial Components
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Moisture Sensitivity Level (MSL): 1; Maximum Output Current-1: 1.5 A; Operating Temperature (TJ-Min): 0 Cel;
SS14
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
M24308/2-1F
Souriau
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Body or Shell Style: RECEPTACLE; MIL Conformity: YES;
Bytesonic Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .6 A; No. of Elements: 1;
CL10B104KB8NNNC
Samsung Electro-mechanics
CL10B104KB8NNNC by Samsung Electro-mechanics is a ceramic capacitor with capacitance of 0.1uF and rated DC voltage of 50V. It has a negative tolerance of 10% and temperature coefficient of 15ppm/°C, suitable for surface mount applications in various electronic devices. With dimensions of 1.6mm x 0.8mm x 0.9mm, it operates b/w -55 to 125 °C providing stable performance in compact designs.
LM358D-T
NXP Semiconductors
LM358D-T by NXP Semiconductors is a dual operational amplifier with 70dB CMRR, 1000kHz unity gain bandwidth, and 9000uV max input offset voltage. Widely used in commercial applications due to its small outline package and low bias current of 0.5uA.
Transpro Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; JESD-609 Code: e0; Terminal Finish: Tin/Lead (Sn/Pb); Nominal Breakdown Voltage: 21.1 V; Maximum Clamping Voltage: 29.2 V;
Fairchild Semiconductor
Cheng-yi Electronic
BAV99
Surge Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WS
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
M/a-com Technology Solutions
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Terminal Position: BOTTOM; Package Style (Meter): CYLINDRICAL;
LFCN-6000D+
Mini-circuits
LFCN-6000D+ by Mini-circuits is a Ceramic LPF filter with 4 terminals, offering attenuation of 20dB at min frequency and 30dB at max frequency. With a center frequency of 6800MHz, it has a VSWR of 1.3 and can handle an average input power of 9W. Ideal for applications requiring precise filtering in RF circuits.
LFCN-3800D
LFCN-3800D by Mini-circuits is a Ceramic LPF filter with 4 terminals, offering attenuation up to 30 dB at 3.45 GHz. With a center frequency of 4.85 GHz and VSWR of 1.3, it's ideal for RF applications requiring surface mount filters with an impedance of 50 ohms.
ASFC10.7MA19-T
Abracon
ASFC10.7MA19-T by Abracon is a Ceramic BPF filter with 10.7 MHz center frequency, 3 dB max insertion loss, and -20 to 85°C operating range. Ideal for surface mount applications in electronics requiring precise signal filtering at 470 OHM impedance.
4700BP15A0600E
Johanson Technology
4700BP15A0600E by Johanson Technology is a Ceramic BPF filter with a center frequency of 4700 MHz, 0.9 dB insertion loss, and 3W power rating. It operates b/w -40°C to 85°C, ideal for surface mount applications in RF circuits requiring a compact design.
DFC3R836P025BHD
Murata Manufacturing
Murata Manufacturing's DFC3R836P025BHD is a Ceramic BPF filter with 2.6 dB max insertion loss at 836.5 MHz. Operating b/w -30°C to 85°C, it features gold terminal finish and surface mounting type. Ideal for applications requiring precise frequency filtering in compact spaces.
LFCN-1200+T&R
LFCN-1200+T&R by Mini-circuits is a Ceramic HPF filter with 1180 MHz center frequency, 2 dB insertion loss, and 1.5 VSWR. Ideal for RF applications requiring high-pass filtering in the 50 OHM impedance range. Operating temperatures from -55 to 100 °C make it versatile for various environments.
DFC31R84P075LHA
Murata Manufacturing's DFC31R84P075LHA is a Ceramic BPF filter with 3.5 dB max insertion loss, operating from -30 to 85°C. Its center frequency is 1842.5 MHz, suitable for surface mount applications in various electronic devices.
2450BM14G0011T-AEC
Johanson Dielectrics
Johanson Dielectrics' 2450BM14G0011T-AEC is a ceramic BPF filter with a center frequency of 2450 MHz and max insertion loss of 1.8 dB. It operates in temperatures ranging from -40 to 105°C and is suitable for surface mount applications requiring an I/O impedance of 50 ohms.
2450FM07B0037T
Johanson Technology's 2450FM07B0037T is a Ceramic LPF filter with a center frequency of 2450 MHz and max insertion loss of 0.8 dB. Ideal for applications requiring high input power up to 3 W, it operates in temperatures ranging from -40°C to 85°C. Suitable for surface mount installations with an impedance of 50Ω.
HFCN-880D+
The Mini-circuits HFCN-880D+ is a Ceramic HPF filter with 40 dB attenuation at 380 MHz. With a VSWR of 1.5, it operates b/w -55°C to 100°C and has a max insertion loss of 3 dB. Ideal for RF applications requiring high-frequency filtering in compact spaces.
5697BP44A0360E
Johanson Dielectrics' 5697BP44A0360E is a Ceramic BPF filter with 5662.5 MHz center frequency, 2.5 dB insertion loss, and 3 W power rating. Ideal for surface mount applications in the temperature range of -40 to 85°C, it features silver/platinum terminal finish and TR packing method.
LFCN-1000D+
LFCN-1000D+ by Mini-circuits is a Ceramic LPF filter with 4 terminals, offering attenuation up to 30 dB at 600 MHz. With a center frequency of 1300 MHz and VSWR of 1.3, it's ideal for RF applications requiring precise filtering in a compact surface-mount design.
CFUCG455KF4X-R0
Murata Manufacturing's CFUCG455KF4X-R0 is a Ceramic BPF filter with 6 dB max insertion loss and 0.455 MHz center frequency. Operating b/w -20°C to 80°C, it has a compact size of L6xB4xH7.5 mm for surface mount applications with 1500 Ohm impedance.
LFCN-320D
LFCN-320D by Mini-circuits is a Ceramic LPF filter with 4 terminals. It offers 40 dB attenuation at max frequency of 2040 kHz and has a center frequency of 460 MHz. Ideal for applications requiring high attenuation and precise filtering in compact spaces.
HFCN-880D
The Mini-circuits HFCN-880D is a Ceramic HPF filter with 4 terminals, offering attenuation up to 40 dB at 380 kHz. With a center frequency of 880 MHz and insertion loss of 3 dB, it's ideal for RF applications requiring high-frequency filtering in compact spaces. Operating b/w -55°C to 100°C, this surface-mount filter has an impedance of 50Ω and can handle an average input power of 7W.
HFCN-2700AD+
Mini-circuits' HFCN-2700AD+ is a Ceramic HPF filter with 20 dB attenuation at 2700 MHz. With 6 terminals and MIL-STD-202 screening, it has a VSWR of 1.5 and can handle up to 7W input power. Ideal for surface mount applications in RF systems requiring high-frequency filtering.
SFECF10M7HA00-R0
Murata's SFECF10M7HA00-R0 is a Ceramic BPF filter with 6 terminals, fo/fc of 10.7 MHz, and max insertion loss of 4 dB. Ideal for surface mount applications in electronics, it operates b/w -20°C to 80°C with an impedance of 330Ω.
0896BM15A0001E
0896BM15A0001E by Johanson Technology is a Ceramic LPF filter with a center frequency of 895.5 MHz and max insertion loss of 1.55 dB. Operating b/w -40°C to 125°C, it's ideal for applications requiring a compact surface mount filter with an impedance of 50Ω and power handling capacity of 1W.
LFCN-1575D+
LFCN-1575D+ by Mini-circuits is a Ceramic LPF filter with 4 terminals, offering attenuation up to 40 dB at 500 kHz. With a center frequency of 1825 MHz and VSWR of 1.2, it's ideal for RF applications requiring surface mount filters with low insertion loss and high power handling capabilities.
LFCN-3800+
LFCN-3800+ by Mini-circuits is a Ceramic LPF filter with 30 dB attenuation at max frequency of 3450 MHz. With 1.6mm width and 3dB max insertion loss, it's ideal for RF applications requiring precise filtering at frequencies up to 1150000 kHz. Operating b/w -55°C to 100°C, it offers low VSWR of 1.3 for optimal performance in a compact size of L3.2xB1.6xH0.94 mm.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
1+ parts
$106.00
100+ parts
$54.25
1k+ parts
$11.90
10k+ parts
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved