Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
DATA LINE FILTER; Rated Current: 6 A; Additional Features: BUILT-IN FERRITE BEAD; STRAIGHT LEAD TYPE; Manufacturer Series: DSS6; Packing Method: TAPE AND REEL; Minimum Operating Temperature: -25 Cel;
Median Price
-
Lifecycle Status
Suppliers In-Stock
0
In-Stock Inventory
< 1k
Data Line Filters DSS6NZ82A103Q55J attributes and parameters. Explore more Data Line Filters devices from Murata Manufacturing
Additional Features:
Capacitance:
Filter Type:
Height:
Length:
Manufacturer Series:
Mounting Type:
No. of Functions:
Maximum Operating Temperature:
Minimum Operating Temperature:
Packing Method:
Dimensions:
Rated Current:
Rated Voltage:
DSS6NZ82A103Q55J Filters trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8504.50.80.00
SB
8504.50.00.00
Murata Manufacturing Co., Ltd. is a Japanese electronics manufacturer founded in 1944 by Akira Murata. Through its expansive supply chain network and innovative product portfolio, Murata designs and manufactures a wide variety of electronic components including capacitors, inductor coils, buzzers, sensors and more for applications in the automotive, medical, industrial and consumer sectors. Based in Nagaokakyo City in Kyoto Prefecture of Japan, Murata operates factories around the world with other facilities located throughout Asia Pacific region such as China and Thailand; North America; Europe; Latin America; Middle East & Africa; as well as Oceania.
Chairman of the Board
Tsuneo Murata
President
Norio Nakajima
Senior Executive VP, Board Member
Hiroshi Iwatsubo
Murata Integrated Passive Solution
Fabrication
Fab Initiation
1989
France
Caen
Wafer Capacity
12,500
Sendai Fab
2008
Japan
Sendai
20,000
Kanazawa - Fab 2
2016
Hakusan
10,000
Komoro
1980
Yasu Plant
1987
Yasu
14,500
Kanazawa Plant
1985
5,000
Vantaa - Fab 1
1998
Finland
Vantaa
Vantaa - Fab 2
2006
12,000
CRCW080510K0FKEA
Vishay Intertechnology
Vishay Intertechnology's CRCW080510K0FKEA is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 reference standard compliance and -55 to 155 °C operating temperature range.
43025-0400
Molex
The Molex 43025-0400 is a board connector with 4 contacts, 2 rows, and a mating contact pitch of 0.118". It has a body length of 0.27", insulation resistance of 1Gohm, and operates b/w -40 to 105°C. Ideal for commercial applications requiring a female connector with crimp termination and UL94V-0 flammability rating.
2N2222A
General Transistor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LL4148
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
SMBJ18CA
Leshan Radio
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
STMicroelectronics
NC7WZ17P6X
Fairchild Semiconductor
BUFFER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 6; Package Code: TSSOP; Package Shape: RECTANGULAR;
2N7002
Yangzhou Yangjie Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; No. of Elements: 1; Terminal Form: GULL WING; Maximum Drain Current (ID): .34 A;
FDN306P
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Maximum Drain Current (Abs) (ID): 2.6 A; Operating Mode: ENHANCEMENT MODE;
LAN8720AI-CP-TR
Microchip Technology
LAN8720AI-CP-TR by Microchip is an Ethernet transceiver with 100 Mbps data rate, operating at -40 to 85 °C. It features a 3.3 V supply voltage, 54 mA supply current, and TS 16949 screening level. Ideal for network interfaces in industrial applications due to its compact square package and low profile design.
MBR0530T1G
Onsemi
MBR0530T1G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.375V and output current of 0.5A. It operates b/w -65°C to 125°C, making it suitable for applications requiring high-speed switching in compact electronic devices like smartphones and tablets. The package style is small outline with gull wing terminals for surface mount assembly.
1N4148WT
Taitron Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
OHN3140U
Tt Electronics Plc
OHN3140U by Tt Electronics Plc is a magnetic field sensor with a max supply voltage of 24V and hysteresis of 2mT. It features an output range of 25mA and operates b/w -20 to 85°C. Ideal for applications requiring precise detection and measurement of magnetic fields in various industries.
ERJ3EKF1002V
Panasonic
Panasonic's ERJ3EKF1002V is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. It operates b/w -55 to 155 °C and is ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance.
LM107H/883C
Rochester Electronics
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Package Equivalence Code: CAN8,.2;
DP83848IVVX/NOPB
Texas Instruments
Texas Instruments DP83848IVVX/NOPB is a 3.3V Ethernet transceiver with 100000 Mbps data rate, suitable for industrial applications. It features CMOS technology, operates b/w -40 to 85 °C, and comes in a low profile flatpack package with matte tin finish.
1N4148
Rugao Dachang Electronic
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
M39029/58-360
Tri-star Electronics International
CONNECTOR ACCESSORY; Material: COPPER ALLOY; MIL Conformity: YES; Associated Military - Specifications: MIL-C-55302/69, MIL-C-38999; MIL-Connector Accessory Name: CONTACT; Terminal Type: CRIMP;
LM107H
General Electric Solid State
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Minimum Voltage Gain: 25000;
MMBT2907ALT1G
MMBT2907ALT1G by Onsemi is a PNP BJT transistor with 100 min hFE, 60V VCEO, and 200MHz fT. Ideal for switching applications, it has a small outline package with Gull Wing terminals and can handle up to 0.6A of collector current.
742792012
Wuerth Elektronik & Kg
Wurth Elektronik 742792012 is a Ferrite Chip Data Line Filter with 2 terminals, operating b/w -55 to 125 °C. It has an output impedance of 33 OHM, DC resistance of 0.008 ohm, and rated current of 4 A. Ideal for surface mount applications in electronics for filtering frequencies from 100 MHz to 800 MHz.
7427920415
Wurth Elektronik 7427920415 is a multi-layer data line filter with FERRITE BEAD construction. It has 2 terminals, operates b/w -55 to 125 °C, and offers 100-150 MHz frequency range. Ideal for surface mount applications in electronics to reduce electromagnetic interference at 600 OHM impedance.
CM1422-03CP
CM1422-03CP by Onsemi is a data line filter with 8 functions and 20 terminals. It has a max operating temperature of 85°C and min of -40°C. With dimensions of L4.0XB1.46XH0.65 (mm), it is ideal for applications requiring high capacitance filtering in compact spaces.
BLM18RK102SN1D
Murata Manufacturing
Murata Manufacturing's BLM18RK102SN1D is a chip bead data line filter with 2 terminals, operating b/w -55 to 125°C. With dimensions of 1.6x0.8x0.8mm, it offers a max frequency of 100MHz and DC resistance of 0.8 ohm. Ideal for surface mount applications, this ferrite chip filter has an output impedance of 1000Ω and rated current of 0.2A.
ILHB0603ER121V
Vishay Intertechnology's ILHB0603ER121V is a 2-terminal data line filter with FERRITE CHIP construction. It operates b/w -55 to 125 °C and has a DC resistance of 0.1 ohm. Ideal for applications requiring a 120 OHM output impedance at frequencies up to 100 MHz, this chip is compact at L1.6xB0.8xH0.8 mm and mounts easily on surfaces.
FLT007A0Z
Abb
Abb FLT007A0Z is a 2-function data line filter with UL, CSA, VDE, EN approvals. Rated for 75V and 7A, it operates b/w -40 to 85°C. Ideal for applications requiring through-hole mounting and filtering of data lines.
BLM18KG331SN1D
Murata Manufacturing's BLM18KG331SN1D is a chip bead data line filter with 2 terminals, operating b/w -55 to 125 °C. It offers a max DC resistance of 0.08 ohm and output impedance of 330 OHM at 100 MHz frequency. Ideal for surface mount applications in electronic devices requiring noise suppression.
BLM18AG601SN1
Murata Manufacturing's BLM18AG601SN1 is a FERRITE CHIP data line filter with dimensions 1.6x0.8x0.8mm, suitable for surface mount applications. It has a max DC resistance of 0.38 ohm, output impedance of 600 ohm, and can operate b/w -55 to 125°C. Ideal for noise suppression in electronic circuits requiring a rated current of 0.5A.
FBMJ3216HS480NT
Taiyo Yuden
Taiyo Yuden's FBMJ3216HS480NT is a chip bead data line filter with 2 terminals. It operates b/w -40 to 85 °C, offering 48 OHM output impedance and 6A rated current. Ideal for surface mount applications, it measures L3.2XB1.6XH1.1 mm and is constructed with ferrite material for effective noise suppression at frequencies up to 100 MHz.
744227
Wurth Elektronik 744227 is a UL-approved data line filter with 2 functions, rated at 80V and inductance of 51uH. Ideal for applications requiring surface mount filters with dimensions of L9.2xB6.0xH5.0mm, it operates b/w -40°C to 125°C and has a max DC resistance of 0.16 ohm.
BK1608HS601-T
BK1608HS601-T by Taiyo Yuden is a chip bead data line filter with 2 terminals, operating b/w -55 to 125 °C. It offers a max frequency of 100 MHz, DC resistance of 0.45 ohm, and output impedance of 600 OHM. Ideal for surface mount applications in electronic devices requiring noise suppression and signal filtering.
BLM18AG601SN1B
Murata's BLM18AG601SN1B is a chip bead data line filter with 2 terminals, ideal for surface mount applications. With dimensions of 1.6x0.8x0.8mm, it offers a max DC resistance of 0.38 ohm and operates b/w -55°C to 125°C. This ferrite chip filter has an output impedance of 600 ohm and is rated for a current of 0.5A, making it suitable for noise suppression in circuits up to 100MHz frequency range.
MPZ2012S101A
TDK
The TDK MPZ2012S101A is an 0805 chip bead data line filter with 2 terminals. It operates b/w -55°C to 125°C, offering a max DC resistance of 0.02 ohm and output impedance of 100 ohm at 100 MHz. Ideal for surface mount applications, it provides effective filtering in electronic circuits requiring noise suppression.
MPZ1608S221ATA00
The TDK MPZ1608S221ATA00 is a 0603 chip bead data line filter with 2 terminals. It offers a max operating temperature of 125°C and min frequency of 100 MHz. Ideal for surface mount applications, it provides an output impedance of 220 ohms and rated current of 2.2A in a compact size of L1.6xB0.8xH0.8 (mm).
MQPI-18LP
Vicor
Vicor's MQPI-18LP data line filter operates at 28V with 10 terminals and a rated current of 7A. With a max temp of 125°C and impedance of 50Ω, it is ideal for applications requiring surface mount filters in temperature-sensitive environments.
NFE61PT102E1H9L
Murata Manufacturing's NFE61PT102E1H9L is a data line filter with 1000 Mohm insulation resistance, 50V rated voltage, and 2A rated current. It has one function and three terminals, suitable for applications requiring noise filtering in data lines. Operating temperature ranges from -40°C to 85°C, making it versatile for various electronic devices.
ACM12V-701-2PL-TL00
TDK's ACM12V-701-2PL-TL00 data line filter has 2 functions, rated at 80V and 8A. With a wide temperature range (-40 to 125°C), it is ideal for automotive applications requiring high insulation resistance (10 Mohm) and low DC resistance (0.006 ohm).
744235900
Wurth Elektronik 744235900 is a Data Line Filter with 2 functions, rated at 60V. With inductance of 0.3uH and max DC resistance of 0.05 ohm, it's ideal for applications requiring a compact surface mount filter solution. Operating b/w -40 to 125°C, it offers high output impedance of 90 ohm for effective noise filtering.
DLW5BTN101SQ2L
DLW5BTN101SQ2L by Murata Mfg: Data Line Filter with 10 Mohm Min Insulation Resistance, 50V Rated Voltage, and 6A Rated Current. Ideal for noise suppression in data lines due to its 100 OHM Output Impedance. Surface mount type suitable for various electronic applications.
MPZ1608S601A
TDK's MPZ1608S601A is a FERRITE CHIP filter with 2 terminals, rated for 1A current. It offers low DC resistance of 0.15 ohm and output impedance of 600 ohm. Ideal for data line filtering in applications requiring compact surface mount components.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
1+ parts
$106.00
100+ parts
$54.25
1k+ parts
$11.90
10k+ parts
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved