Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
DLW43SH101XK2K by Murata Manufacturing is a FERRITE CHIP filter with 100uH inductance and 10 Mohm min insulation resistance. It has 2 functions, rated at 50V and 0.2A, suitable for AEC-Q200 applications in automotive electronics due to its compact size of L4.5xB3.2xH2.6mm for surface mounting.
Median Price
$0.176
Lifecycle Status
Suppliers In-Stock
4
In-Stock Inventory
1k+
TME
1+ parts
-
100+ parts
1k+ parts
10k+ parts
Chip Stock
Vyrian
Nova Conductors
Semicontronic
$0.400
$0.390
$0.388
Aztec Data Supply Inc.
$1.520
Corohmni
$2.078
Advanced Electronics
$3.212
$3.051
AZTECH Wire
$6.675
Abacus Technologies
Kepictronics
Infinite Electronics LLP (Excess)
Glotronic Ltd.
Perfect Parts
Argo Parts USA
Authorized Procurement Solutions
Continental Prestige Electronics
Bastille Electronics
High minimum insulation resistance ensures reliability and safety in preventing leakage currents, making this product suitable for various applications.
Having multiple functions in a single filter provides enhanced filtering capabilities, allowing for better signal and noise separation.
Compliance with AEC-Q200 standards ensures high quality and reliability, making this product ideal for automotive or other rugged environment applications.
The high rated voltage makes this filter suitable for a wide range of voltage applications, providing flexibility in design.
Having 4 terminals allows for easy and secure connection, ensuring stable performance in various circuit configurations.
Ferrite chip filters are known for their excellent noise suppression capabilities, making this product a good choice for applications requiring effective electromagnetic interference suppression.
High maximum operating temperature allows for reliable performance in elevated temperature environments, ensuring consistent filtering function.
Low minimum operating temperature ensures the filter can function effectively in cold conditions, making it suitable for a wide range of operating environments.
Tin terminal finish provides good conductivity and corrosion resistance, ensuring long-term reliability and stable electrical connections.
The specified inductance value indicates the filter's ability to effectively filter out unwanted frequencies, ensuring improved signal quality.
Compact width allows for space-saving design integration, making this filter suitable for applications with limited board space.
Low maximum DC resistance minimizes power loss in the filter circuit, ensuring efficient filtering performance.
Compact length facilitates easy installation and placement on the circuit board, making this filter versatile for various board layouts.
Tape and reel packaging offers convenience in handling and automated assembly, ensuring efficient production processes.
Surface mounting type allows for easy and secure installation on the PCB, enhancing reliability and reducing installation time.
Compact dimensions make this filter suitable for small-scale applications or where space constraints are a consideration.
The specified rated current allows for proper current handling capacity, ensuring the filter can effectively filter signals without being overloaded.
Low height profile enables easy integration into compact electronic devices or systems, making this filter a versatile choice for space-constrained applications.
Data Line Filters DLW43SH101XK2K attributes and parameters. Explore more Data Line Filters devices from Murata Manufacturing
Maximum DC Resistance:
Filter Type:
Height:
Inductance:
Minimum Insulation Resistance:
JESD-609 Code:
Length:
Mounting Type:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Packing Method:
Dimensions:
Rated Current:
Rated Voltage:
Screening Level:
Terminal Finish:
Width (mm):
DLW43SH101XK2K Filters trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8504.50.80.00
SB
8504.50.00.00
Murata Manufacturing Co., Ltd. is a Japanese electronics manufacturer founded in 1944 by Akira Murata. Through its expansive supply chain network and innovative product portfolio, Murata designs and manufactures a wide variety of electronic components including capacitors, inductor coils, buzzers, sensors and more for applications in the automotive, medical, industrial and consumer sectors. Based in Nagaokakyo City in Kyoto Prefecture of Japan, Murata operates factories around the world with other facilities located throughout Asia Pacific region such as China and Thailand; North America; Europe; Latin America; Middle East & Africa; as well as Oceania.
Chairman of the Board
Tsuneo Murata
President
Norio Nakajima
Senior Executive VP, Board Member
Hiroshi Iwatsubo
Murata Integrated Passive Solution
Fabrication
Fab Initiation
1989
France
Caen
Wafer Capacity
12,500
Sendai Fab
2008
Japan
Sendai
20,000
Kanazawa - Fab 2
2016
Hakusan
10,000
Komoro
1980
Yasu Plant
1987
Yasu
14,500
Kanazawa Plant
1985
5,000
Vantaa - Fab 1
1998
Finland
Vantaa
Vantaa - Fab 2
2006
12,000
LM358D-T
NXP Semiconductors
LM358D-T by NXP Semiconductors is a dual operational amplifier with 70dB CMRR, 1000kHz unity gain bandwidth, and 9000uV max input offset voltage. Widely used in commercial applications due to its small outline package and low bias current of 0.5uA.
1N4148
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Surface Mount: NO; Config: SINGLE; Peak Reflow Temperature (C): 260; No. of Phases: 1; Diode Element Material: SILICON;
BSS123,215
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Moisture Sensitivity Level (MSL): 1; No. of Terminals: 3; Maximum Time At Peak Reflow Temperature (s): 30;
LAN8720AI-CP-TR
Microchip Technology
LAN8720AI-CP-TR by Microchip is an Ethernet transceiver with 100 Mbps data rate, operating at -40 to 85 °C. It features a 3.3 V supply voltage, 54 mA supply current, and TS 16949 screening level. Ideal for network interfaces in industrial applications due to its compact square package and low profile design.
Texas Instruments
1N4148 by Texas Instruments is a rectifier diode with max reverse recovery time of 0.004 us and max forward voltage of 1V. Ideal for applications requiring low reverse current such as signal demodulation circuits. Operates at max temp of 200°C, making it suitable for high-temperature environments.
SS14
Zowie Technology
RECTIFIER DIODE; Surface Mount: YES; No. of Phases: 1; Maximum Operating Temperature: 125 Cel; No. of Elements: 1; Maximum Non Repetitive Peak Forward Current: 30 A;
Daco Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Renesas Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
General Instrument
1N4148WS
First Components International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Onsemi
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Terminal Finish: Matte Tin (Sn) - annealed; Transistor Element Material: SILICON;
Fairchild Semiconductor
LL4148
Taitron Components
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
SMBJ18CA
Pro-an Electronic
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Polarity: BIDIRECTIONAL; Nominal Breakdown Voltage: 21.05 V; Maximum Repetitive Peak Reverse Voltage: 18 V;
2N2222A
Swampscott Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Semiconductor Technology
BSS138
Yangzhou Yangjie Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; JESD-30 Code: R-PDSO-G3; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Operating Mode: ENHANCEMENT MODE;
M24308/2-1F
Souriau-sunbank Connection Technologies
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body Length: 1.228 inch; Mounting Type: CABLE AND PANEL; Termination Type: CRIMP;
MURS160T3G
MURS160T3G by Onsemi is a single rectifier diode with a max output current of 2A and max repetitive peak reverse voltage of 600V. It has a fast recovery time of 0.075us, making it suitable for high voltage applications. The diode operates in temperatures ranging from -65 to 175°C, ideal for power systems requiring ultra-fast response.
DS18B20Z+
Maxim Integrated
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Body Width: 3.9 inch; Maximum Supply Voltage: 5.5 V;
NVT4858HKZ
DATA LINE FILTER;
MMZ1608S102ATA00
TDK
The TDK MMZ1608S102ATA00 is a chip bead data line filter with 2 terminals, FERRITE CHIP construction, and 0.5 ohm max DC resistance. It operates b/w -55 to 125 °C and has an output impedance of 1000 OHM. Ideal for surface mount applications in electronics for noise suppression and signal filtering.
ECMF02-4CMX8
STMicroelectronics
STMicroelectronics ECMF02-4CMX8 is a DATA LINE FILTER with 2 functions and 8 terminals. It has a max operating temp of 125°C, DC resistance of 4 ohm, and output impedance of 50 OHM. Ideal for applications requiring data line filtering in compact spaces due to its small dimensions (2.55mm x 1.25mm x 0.6mm).
744273501
Wuerth Elektronik & Kg
Wurth Elektronik 744273501 is a Data Line Filter with 2 functions, rated voltage of 80V, and inductance of 5uH. It operates b/w -40°C to 125°C, has Tin/Copper terminals, and dimensions of L9.5xB8.3xH5.3mm. Ideal for applications requiring a max current of 5A and output impedance of 500Ω in surface mount configurations.
74279215
Wurth Elektronik 74279215 is a multi-layer FERRITE CHIP filter with dimensions L3.2XB1.6XH1.1 (mm). It has a max operating temperature of 125°C and min frequency of 100 MHz, suitable for data line filtering applications due to its 80 OHM output impedance and surface mounting type.
MPZ2012S101AT
TDK's MPZ2012S101AT is an 0805 chip bead filter with 2 terminals. With a max operating temp of 125°C and min freq of 100 MHz, it offers low DC resistance at 0.02 ohm. Ideal for data line filtering applications, this ferrite chip measures L2.0xB1.25xH0.85 mm and has a rated current of 4A.
NUF2450MUT2G
NUF2450MUT2G by Onsemi is a Data Line Filter with 2 functions, 8 terminals, and inductance of 0.0023 uH. It operates b/w -40 to 85 °C and has a max DC resistance of 1.7 ohm. Ideal for applications requiring data line filtering in compact dimensions (L1.8XB1.2XH0.55 mm).
4400-076LF
Tusonix
FEED THROUGH CAPACITOR; Rated Current: 10 A; JESD-609 Code: e4; Maximum Operating Temperature: 125 Cel; Mounting Type: PANEL MOUNT; Maximum Insertion Loss: 28 dB;
742792603
Wurth Elektronik 742792603 is a multi-layer FERRITE CHIP filter with 2 terminals, suitable for data line applications. It operates b/w -55 to 125 °C, with a frequency range of 100-1000 MHz and DC resistance of 0.03 ohm. This surface mount component has dimensions of L1.6xB0.8xH0.8 mm and rated current of 4A, ideal for noise suppression in electronic circuits.
MH1608-601Y
Bourns
The Bourns MH1608-601Y is a chip bead data line filter with 2 terminals, offering 0.2 Mohm insulation resistance. With dimensions of 1.6x0.8x0.8mm, it operates b/w -55 to 125°C and has a max frequency of 100 MHz. Ideal for applications requiring a compact surface mount filter with an output impedance of 600 ohms.
ACM2012-361-2P-T002
TDK's ACM2012-361-2P-T002 is a FERRITE CHIP filter with 2 functions, rated at 50V and 0.22A. With dimensions of L2.0XB1.2XH1.3 (mm), it offers insulation resistance of 10 Mohm for data line applications in temperatures ranging from -40 to 85 °C.
ILBB-0805ER301V
Vishay Intertechnology
Vishay Intertechnology's ILBB-0805ER301V is a 2-terminal data line filter with FERRITE CHIP construction. With dimensions of L2.0XB1.25XH0.9 (mm), it operates b/w -55 to 125 °C and has a max DC resistance of 0.2 ohm, suitable for surface mount applications in electronic devices requiring noise suppression up to 100 MHz frequency range.
EMI9408MUTAG
EMI9408MUTAG by Onsemi is a data line filter with 8 functions and 16 terminals. It offers an inductance of 0.07uH, capacitance of 24uF, and output impedance of 50 ohm. Ideal for applications requiring surface mount filters with a temperature range from -40 to 85°C.
MMZ2012R301ATD25
MMZ2012R301ATD25 by TDK is a chip bead data line filter with AEC-Q200 screening. Featuring FERRITE CHIP technology, it has 2 terminals and operates b/w -55 to 125 °C. With dimensions of L2.0xB1.25xH0.85 (mm), it's ideal for automotive electronics and industrial applications due to its 300 OHM output impedance and 0.6A rated current capacity.
CM4440Z121R-10
Laird Technologies
The Laird Technologies CM4440Z121R-10 is a Data Line Filter with 3 functions, rated at 100V and 20A. It operates b/w -40°C to 125°C, with a max DC resistance of 0.001 ohm. This filter is ideal for applications requiring noise suppression in data lines.
DLW5BSM302SQ2L
Murata Manufacturing
Murata Manufacturing DLW5BSM302SQ2L is a Data Line Filter with 2 functions, rated at 50V and 0.5A. It offers high insulation resistance of 10 Mohm, suitable for applications requiring filtering in data lines with operating temperatures from -40 to 85°C.
BNX023-01L
Murata Manufacturing's BNX023-01L is a data line filter with 2 functions and 4 terminals. It offers 35 dB attenuation at 1000 MHz, rated for 100 V and 20 A. Ideal for applications requiring noise suppression in data lines, it operates b/w -40 to 125 °C.
NFM21CC223R1H3D
Murata Manufacturing's NFM21CC223R1H3D is a data line filter with 1000 Mohm insulation resistance, 50V rated voltage, and 22000 uF capacitance. It is a feed-through capacitor suitable for applications requiring filtering in temperatures ranging from -55 to 125 °C.
744232090
Wurth Elektronik 744232090 Data Line Filter with 2 functions, rated voltage of 50V, and max operating temp of 125°C. Ideal for applications requiring surface mount filters with dimensions L3.2xB1.6xH1.9mm in tape and reel packaging.
742792117
Wurth Elektronik 742792117 is a multi-layer FERRITE CHIP filter with dimensions L3.2XB1.6XH1.1 (mm). It has a max frequency of 600 MHz, DC resistance of 0.005 ohm, and output impedance of 48 OHM. Ideal for data line filtering applications due to its rated current of 6 A and surface mounting type.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
DLW43SH101XK2L
DLW43SH101XK2L by Murata Mfg. is a FERRITE CHIP filter with 100uH inductance, 10 Mohm insulation resistance, and 50V rated voltage. It has 2 functions and operates b/w -40 to 125 °C. Ideal for data line filtering applications due to AEC-Q200 screening level compliance.
DLW43SH510XK2L
Murata Manufacturing DLW43SH510XK2L is a FERRITE CHIP data line filter with 51uH inductance, 10 Mohm insulation resistance, and AEC-Q200 screening. It has 4 terminals, rated for 50V voltage and 0.23A current. Ideal for automotive applications due to its compact size (L4.5xB3.2xH2.6 mm) and surface mounting type.
DLW43SH101XK2B
FERRITE CHIP; Maximum DC Resistance: 2 ohm; Rated Current: .2 A; Screening Level: AEC-Q200; JESD-609 Code: e3; Rated Voltage: 50 V;
DLW43SH510XK2K
FERRITE CHIP; Maximum DC Resistance: 1 ohm; Rated Current: .23 A; No. of Terminals: 4; Terminal Finish: TIN; Inductance: 51 uH;
DLW44SN101SK2B
DLW44SN101SK2B by Murata Manufacturing is a data line filter with a rated voltage of 60V and a rated current of 3.1A. It has a min insulation resistance of 10 Mohm and can operate at temperatures ranging from -40 to 105 °C. This surface mount filter is commonly used for noise suppression in data transmission applications.
DLW44SN101SK2K
DLW44SN101SK2K by Murata Mfg. is a Data Line Filter with 10 Mohm Min Insulation Resistance, 60V Rated Voltage, and 4 Terminals. It operates b/w -40 to 105 °C and has a DC Resistance of 0.0224 ohm. Ideal for applications requiring noise suppression in data lines with a rated current of 3.1A.
DLW44SN101SK2L
Murata Manufacturing's DLW44SN101SK2L is a data line filter with 2 functions, rated at 60V and 3.1A. With a min insulation resistance of 10 Mohm, it operates b/w -40 to 105 °C and has an output impedance of 100 ohm. Ideal for applications requiring surface mount filters in electronic devices.
DLW43SH510XK2B
FERRITE CHIP; Maximum DC Resistance: 1 ohm; Rated Current: .23 A; Inductance: 51 uH; Height: 2.6 mm; Packing Method: BULK;
DLW44SM302SK2L
DLW44SM302SK2L by Murata Mfg is a DATA LINE FILTER with 2 functions, rated at 60V and 1.1A. It has an output impedance of 2200Ω, suitable for applications requiring noise suppression in data lines. Operating temperature ranges from -40 to 105°C, making it versatile for various electronic devices.
DLW43MH201XK2L
Murata Manufacturing's DLW43MH201XK2L is a data line filter with 200uH inductance and 4.5ohm max DC resistance. It has 2 functions, rated for 20V, and operates b/w -40 to 105°C. Ideal for automotive applications due to AEC-Q200 screening level compliance.
DLW44SM172SK2L
DATA LINE FILTER; Maximum DC Resistance: .084 ohm; Rated Current: 1.5 A; No. of Terminals: 4; Packing Method: TR, EMBOSSED, 7 INCH; Minimum Insulation Resistance: 10 Mohm;
DLW43SH101XP2L
FERRITE CHIP; Maximum DC Resistance: 2 ohm; Rated Current: .17 A; No. of Terminals: 4; Dimensions: L4.5XB3.2XH2.7 (mm)/L0.177XB0.126XH0.106 (inch); Minimum Operating Temperature: -40 Cel;
DLW44SM101SK2L
DATA LINE FILTER; Maximum DC Resistance: .0224 ohm; Rated Current: 3.1 A; Output Impedance (ohm): 100 OHM; Width (mm): 4; Maximum Operating Temperature: 105 Cel;
DLW43SH110XK2L
FERRITE CHIP; Maximum DC Resistance: .5 ohm; Rated Current: .36 A; Packing Method: TAPE AND REEL; Dimensions: L4.5XB3.2XH2.6 (mm)/L0.177XB0.126XH0.102 (inch); Minimum Insulation Resistance: 10 Mohm;
DLW44SM851SK2L
DATA LINE FILTER; Maximum DC Resistance: .056 ohm; Rated Current: 1.9 A; Maximum Operating Temperature: 105 Cel; Length: 4 mm; Rated Voltage: 60 V;
DLW44SN172SK2L
DATA LINE FILTER; Maximum DC Resistance: .084 ohm; Rated Current: 1.5 A; Length: 4 mm; Width (mm): 4; Packing Method: TR, EMBOSSED, 7 INCH;
DLW43MH201XK2B
DATA LINE FILTER; Maximum DC Resistance: 4.5 ohm; Rated Current: .11 A; Additional Features: AEC-Q200; Minimum Insulation Resistance: 10 Mohm; Height: 2.7 mm;
DLW43SH110XK2B
FERRITE CHIP; Maximum DC Resistance: .5 ohm; Rated Current: .36 A; JESD-609 Code: e3; Inductance: 11 uH; Length: 4.5 mm;
DLW43SH101XP2B
FERRITE CHIP; Maximum DC Resistance: 2 ohm; Rated Current: .17 A; Maximum Operating Temperature: 125 Cel; JESD-609 Code: e3; Terminal Finish: Tin (Sn);
DLW43SH101XP2K
FERRITE CHIP; Maximum DC Resistance: 2 ohm; Rated Current: .17 A; Width (mm): 3.2; Maximum Operating Temperature: 125 Cel; Height: 2.7 mm;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved