Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Murata Manufacturing's DLW44SN101SK2L is a data line filter with 2 functions, rated at 60V and 3.1A. With a min insulation resistance of 10 Mohm, it operates b/w -40 to 105 °C and has an output impedance of 100 ohm. Ideal for applications requiring surface mount filters in electronic devices.
Median Price
$0.926
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
1k+
Nova Conductors
1+ parts
100+ parts
-
1k+ parts
10k+ parts
Vyrian
Semicontronic
$0.400
$0.390
$0.388
Continental Prestige Electronics
$0.907
Argo Parts USA
Netroflash
Corohmni
$0.956
Advanced Electronics
$1.030
$0.937
$0.845
AZTECH Wire
$10.537
High insulation resistance ensures reliable performance and safety in data line applications.
With two functions, this filter provides enhanced filtering capabilities for improved signal quality.
Suitable for a wide range of applications requiring a 60V voltage rating.
Four terminals enable easy and secure connections for efficient data line filtering.
Specifically designed for data line applications, ensuring optimal filtering performance.
With a high maximum operating temperature, this filter can withstand demanding environments.
Able to operate effectively in low temperature conditions, offering versatile use.
Compact and slim design with a width of 4mm for convenient installation in limited spaces.
Low DC resistance minimizes power loss and ensures efficient signal transmission.
Compact length of 4mm for a space-saving solution in data line applications.
With an output impedance of 100 ohms, this filter helps to maintain signal integrity.
Securely packed in TR and embossed packaging, ensuring protection during transportation and storage.
Surface mount design for easy and reliable installation on PCBs.
Able to handle a rated current of 3.1A, making it suitable for various data line filtering applications.
Low profile height of 1.4mm for a space-efficient design in compact electronic devices.
Data Line Filters DLW44SN101SK2L attributes and parameters. Explore more Data Line Filters devices from Murata Manufacturing
Maximum DC Resistance:
Filter Type:
Height:
Minimum Insulation Resistance:
Length:
Mounting Type:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Output Impedance (ohm):
Packing Method:
Rated Current:
Rated Voltage:
Width (mm):
DLW44SN101SK2L Filters trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8504.50.80.00
SB
8504.50.00.00
Murata Manufacturing Co., Ltd. is a Japanese electronics manufacturer founded in 1944 by Akira Murata. Through its expansive supply chain network and innovative product portfolio, Murata designs and manufactures a wide variety of electronic components including capacitors, inductor coils, buzzers, sensors and more for applications in the automotive, medical, industrial and consumer sectors. Based in Nagaokakyo City in Kyoto Prefecture of Japan, Murata operates factories around the world with other facilities located throughout Asia Pacific region such as China and Thailand; North America; Europe; Latin America; Middle East & Africa; as well as Oceania.
Chairman of the Board
Tsuneo Murata
President
Norio Nakajima
Senior Executive VP, Board Member
Hiroshi Iwatsubo
Murata Integrated Passive Solution
Fabrication
Fab Initiation
1989
France
Caen
Wafer Capacity
12,500
Sendai Fab
2008
Japan
Sendai
20,000
Kanazawa - Fab 2
2016
Hakusan
10,000
Komoro
1980
Yasu Plant
1987
Yasu
14,500
Kanazawa Plant
1985
5,000
Vantaa - Fab 1
1998
Finland
Vantaa
Vantaa - Fab 2
2006
12,000
EU2B-YS3303C
Idec
ROTARY SWITCH;
2N7002
Bytesonic Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Terminal Position: DUAL; Minimum Operating Temperature: -55 Cel;
LL4148
Rfe International
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
ERJ2RKF1002X
Panasonic
Panasonic's ERJ2RKF1002X is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance and operating temperature range of -55 to 155 °C.
LM358MX
Texas Instruments
LM358MX by Texas Instruments is a dual operational amplifier with a max input offset voltage of 9000 uV. It has a nominal voltage of 5V and a min voltage gain of 15000. This op amp is commonly used in applications requiring amplification and signal conditioning.
1N4148
Capar Components
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Forward Voltage (VF): 1 V; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Output Current: .15 A;
SMBJ18CA
Pro-an Electronic
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Polarity: BIDIRECTIONAL; Nominal Breakdown Voltage: 21.05 V; Maximum Repetitive Peak Reverse Voltage: 18 V;
261
Micronetics
Other Interface ICs; Temperature Grade: MILITARY; Terminal Form: FLAT; No. of Terminals: 14; Package Code: DFP; Package Shape: SQUARE;
Vishay Telefunken
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BSS138LT3G
Onsemi
BSS138LT3G by Onsemi is a N-CHANNEL FET with a min DS breakdown voltage of 50V. It is used for switching applications and has a max drain current of 0.2A and max drain-source on resistance of 3.5 ohm.
2N2222A
Baneasa S A
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .8 A; Qualification: Not Qualified;
ABS25-32.768KHZ-T
Abracon
Abracon's ABS25-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 122% stability, and 50000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency, such as IoT devices and precision timing systems in industrial settings.
LM555CN
Intersil
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
Harris Semiconductor
SPC TECHNOLOGY/ MULTICOMP
CRCW080510K0FKEA
Vishay Intertechnology
Vishay Intertechnology's CRCW080510K0FKEA is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 reference standard compliance and -55 to 155 °C operating temperature range.
LM7805CT
LM7805CT by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1.5A. It operates b/w 0-125°C, has a dropout voltage of 2V, and offers excellent line/load regulation for various electronic applications.
Vishay Semiconductors
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
Bkc Semiconductors
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
NXP Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Maximum Operating Temperature: 150 Cel;
EMI7208MUTAG
EMI7208MUTAG by Onsemi is a data line filter with 8 functions and a rated voltage of 2.5V. It has a compact size of L3.3XB1.35XH0.55 (mm) and is suitable for surface mount applications. This filter offers a max operating temperature of 85°C and can be used in various electronic devices to reduce electromagnetic interference on data lines.
74270057
Wuerth Elektronik & Kg
Wurth Elektronik 74270057 is a FERRITE BEAD Data Line Filter with 808 OHM Output Impedance. Operating temperature ranges from -25 to 125 °C, with a diameter of 19mm and dimensions D19.0XH50.8 (mm). Ideal for applications requiring noise suppression in data lines or signal filtering in electronic circuits.
744229
Wurth Elektronik 744229 is a UL-approved data line filter with 2 functions, rated at 80V and inductance of 6.5uH. It operates b/w -40 to 125°C, has a max DC resistance of 0.95 ohm, and output impedance of 18400 ohm. This surface mount filter is ideal for applications requiring noise suppression in data lines.
BLM21PG331SH1D
Murata Manufacturing
BLM21PG331SH1D by Murata is an 0805 chip bead filter with 2 terminals, operating b/w -55 to 125 °C. It offers a DC resistance of 0.09 ohm, output impedance of 330 OHM, and rated current of 1.5 A. Ideal for data line filtering applications at frequencies ranging from 100 MHz with surface mounting type.
PBY201209T-601Y-N
Chilisin Electronics
FERRITE CHIP; Maximum DC Resistance: .1 ohm; Maximum Frequency: 100 MHz; Material: Ferrite; Rated Current: 2 A; No. of Terminals: 2;
ECLAMP2456P.TCT
Semtech
Semtech's ECLAMP2456P.TCT is a 5V data line filter with 6 functions and 12 terminals. It offers 40 dB attenuation at 2700 MHz, operating from -40 to 85°C. Ideal for applications requiring surface mount filters with dimensions of L3.1xB1.7xH0.65 mm in plastic packaging on tape and reel.
742792133
Wurth Elektronik 742792133 is a FERRITE CHIP Data Line Filter with dimensions L3.2XB1.6XH1.1 (mm). It has a Max Operating Temperature of 125°C and Min Operating Temperature of -55°C, suitable for surface mount applications with a rated current of 0.5 A and output impedance of 600 OHM.
MMZ1608B601CTDH5
TDK
TDK's MMZ1608B601CTDH5 is a chip bead data line filter with 2 terminals. It offers a max operating temperature of 125°C and min of -55°C. With an output impedance of 600 ohms, it is ideal for automotive applications due to its AEC-Q200 screening level.
FBMJ2125HS420-TV
Taiyo Yuden
FBMJ2125HS420-TV by Taiyo Yuden is a ferrite chip data line filter with dimensions of L2.0XB1.25XH0.85 (mm). It has a max operating temperature of 125 °C and a min operating temperature of -40 °C. This filter is suitable for surface mount applications and has a rated current of 4 A.
FBMH3225HM102NT
FBMH3225HM102NT by Taiyo Yuden is a chip bead data line filter with 2 terminals, rated for 2A current. Featuring ferrite chip construction, it operates b/w -40°C to 85°C and offers an output impedance of 1000Ω at frequencies ranging from 100MHz. Ideal for surface mount applications requiring effective noise suppression in electronic circuits.
BNX016-01
Murata Manufacturing's BNX016-01 is a 3-function data line filter with 40 dB max insertion loss, rated for 25V and 15A. With dimensions of L12.0xB11.0xH8.0 mm, it operates b/w -40 to 125 °C and has an output impedance of 50 ohm. Ideal for applications requiring noise suppression in data lines.
504-6
West Coast Magnetics
504-6 by West Coast Magnetics is a data line filter with 2 functions and 4 terminals. It has an inductance of 110 uH and max DC resistance of 0.0024 ohm. This surface mount filter is used for noise suppression in data lines.
744242510
Wurth Elektronik 744242510 is a Data Line Filter with UL approval, rated voltage of 80V, and inductance of 51uH. It has 2 functions, operates b/w -40°C to 125°C, and offers a max DC resistance of 0.32 ohm. This filter is ideal for applications requiring noise suppression in data lines.
742792622
Wurth Elektronik 742792622 is a multi-layer FERRITE CHIP filter with 2 terminals, suitable for data line applications. It operates b/w -55 to 125 °C, has a DC resistance of 0.3 ohm, and an output impedance of 180 OHM. Dimensions are L1.6xB0.8xH0.8 mm, rated for 1.5 A current with surface mounting type.
MMZ1005A222ET000
TDK MMZ1005A222ET000 is a chip bead data line filter with 2 terminals. It offers a max DC resistance of 2.2 ohm and an output impedance of 2200 ohm, suitable for surface mount applications in electronics to suppress electromagnetic interference.
LFBKP2125HS221-T
LFBKP2125HS221-T by Taiyo Yuden is a FERRITE CHIP data line filter with 2 terminals. It has a max operating temperature of 85°C and min of -55°C. With dimensions of L2.0XB1.25XH0.85 (mm), it is ideal for applications requiring an output impedance of 220 OHM, rated current of 2A, and surface mounting type.
ACM9070-701-2PL-TL
ACM9070-701-2PL-TL by TDK is a Data Line Filter with 2 functions, rated voltage of 80V, and insulation resistance of 10 Mohm. It operates b/w -25 to 85 °C and has a DC resistance of 0.01 ohm. Ideal for applications requiring filtering in data lines with surface mounting type.
4700-008LF
Cts
Cts 4700-008LF is a Data Line Filter with 100V rated voltage, 0.1uH inductance, and 70dB max insertion loss. Ideal for applications requiring high insulation resistance, such as data transmission systems or electronic devices. Dimensions: L8XB2.29XH2.29 (mm), Mounting Type: SURFACE MOUNT.
DLP11SN331HL2L
Murata Manufacturing's DLP11SN331HL2L is a data line filter with 2 functions, rated at 5V and 0.08A. It offers an output impedance of 330 ohm, suitable for applications requiring noise suppression in data lines. With dimensions of L1.25xB1.0xH0.82 (mm), it is designed for surface mount installation in various electronic devices.
LFBK2125HS470-T
LFBK2125HS470-T by Taiyo Yuden is a FERRITE CHIP data line filter with 2 terminals. It has a max operating temperature of 125°C and min of -55°C. With dimensions of L2.0XB1.25XH0.85 (mm), it is ideal for surface mount applications requiring an output impedance of 47 OHM and rated current of 1 A.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
DLW43SH101XK2L
DLW43SH101XK2L by Murata Mfg. is a FERRITE CHIP filter with 100uH inductance, 10 Mohm insulation resistance, and 50V rated voltage. It has 2 functions and operates b/w -40 to 125 °C. Ideal for data line filtering applications due to AEC-Q200 screening level compliance.
DLW43SH510XK2L
Murata Manufacturing DLW43SH510XK2L is a FERRITE CHIP data line filter with 51uH inductance, 10 Mohm insulation resistance, and AEC-Q200 screening. It has 4 terminals, rated for 50V voltage and 0.23A current. Ideal for automotive applications due to its compact size (L4.5xB3.2xH2.6 mm) and surface mounting type.
DLW43SH101XK2K
DLW43SH101XK2K by Murata Manufacturing is a FERRITE CHIP filter with 100uH inductance and 10 Mohm min insulation resistance. It has 2 functions, rated at 50V and 0.2A, suitable for AEC-Q200 applications in automotive electronics due to its compact size of L4.5xB3.2xH2.6mm for surface mounting.
DLW43SH101XK2B
FERRITE CHIP; Maximum DC Resistance: 2 ohm; Rated Current: .2 A; Screening Level: AEC-Q200; JESD-609 Code: e3; Rated Voltage: 50 V;
DLW43SH510XK2K
FERRITE CHIP; Maximum DC Resistance: 1 ohm; Rated Current: .23 A; No. of Terminals: 4; Terminal Finish: TIN; Inductance: 51 uH;
DLW44SN101SK2B
DLW44SN101SK2B by Murata Manufacturing is a data line filter with a rated voltage of 60V and a rated current of 3.1A. It has a min insulation resistance of 10 Mohm and can operate at temperatures ranging from -40 to 105 °C. This surface mount filter is commonly used for noise suppression in data transmission applications.
DLW44SN101SK2K
DLW44SN101SK2K by Murata Mfg. is a Data Line Filter with 10 Mohm Min Insulation Resistance, 60V Rated Voltage, and 4 Terminals. It operates b/w -40 to 105 °C and has a DC Resistance of 0.0224 ohm. Ideal for applications requiring noise suppression in data lines with a rated current of 3.1A.
DLW43SH510XK2B
FERRITE CHIP; Maximum DC Resistance: 1 ohm; Rated Current: .23 A; Inductance: 51 uH; Height: 2.6 mm; Packing Method: BULK;
DLW44SM302SK2L
DLW44SM302SK2L by Murata Mfg is a DATA LINE FILTER with 2 functions, rated at 60V and 1.1A. It has an output impedance of 2200Ω, suitable for applications requiring noise suppression in data lines. Operating temperature ranges from -40 to 105°C, making it versatile for various electronic devices.
DLW43MH201XK2L
Murata Manufacturing's DLW43MH201XK2L is a data line filter with 200uH inductance and 4.5ohm max DC resistance. It has 2 functions, rated for 20V, and operates b/w -40 to 105°C. Ideal for automotive applications due to AEC-Q200 screening level compliance.
DLW44SM172SK2L
DATA LINE FILTER; Maximum DC Resistance: .084 ohm; Rated Current: 1.5 A; No. of Terminals: 4; Packing Method: TR, EMBOSSED, 7 INCH; Minimum Insulation Resistance: 10 Mohm;
DLW43SH101XP2L
FERRITE CHIP; Maximum DC Resistance: 2 ohm; Rated Current: .17 A; No. of Terminals: 4; Dimensions: L4.5XB3.2XH2.7 (mm)/L0.177XB0.126XH0.106 (inch); Minimum Operating Temperature: -40 Cel;
DLW44SM101SK2L
DATA LINE FILTER; Maximum DC Resistance: .0224 ohm; Rated Current: 3.1 A; Output Impedance (ohm): 100 OHM; Width (mm): 4; Maximum Operating Temperature: 105 Cel;
DLW43SH110XK2L
FERRITE CHIP; Maximum DC Resistance: .5 ohm; Rated Current: .36 A; Packing Method: TAPE AND REEL; Dimensions: L4.5XB3.2XH2.6 (mm)/L0.177XB0.126XH0.102 (inch); Minimum Insulation Resistance: 10 Mohm;
DLW44SM851SK2L
DATA LINE FILTER; Maximum DC Resistance: .056 ohm; Rated Current: 1.9 A; Maximum Operating Temperature: 105 Cel; Length: 4 mm; Rated Voltage: 60 V;
DLW44SN172SK2L
DATA LINE FILTER; Maximum DC Resistance: .084 ohm; Rated Current: 1.5 A; Length: 4 mm; Width (mm): 4; Packing Method: TR, EMBOSSED, 7 INCH;
DLW43MH201XK2B
DATA LINE FILTER; Maximum DC Resistance: 4.5 ohm; Rated Current: .11 A; Additional Features: AEC-Q200; Minimum Insulation Resistance: 10 Mohm; Height: 2.7 mm;
DLW44SN172SK2K
DATA LINE FILTER; Maximum DC Resistance: .084 ohm; Rated Current: 1.5 A; No. of Terminals: 4; Maximum Operating Temperature: 105 Cel; Output Impedance (ohm): 1700 OHM;
DLW44SN172SK2B
DATA LINE FILTER; Maximum DC Resistance: .084 ohm; Rated Current: 1.5 A; Rated Voltage: 60 V; No. of Terminals: 4; Output Impedance (ohm): 1700 OHM;
DLW44SN851SK2B
DATA LINE FILTER; Maximum DC Resistance: .056 ohm; Rated Current: 1.9 A; Rated Voltage: 60 V; No. of Functions: 2; Mounting Type: SURFACE MOUNT;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved