Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
The Molex 85513-5115 is a Telecom & Datacom Connector with Insulation Resistance of 500MΩ, rated for 1.5A signal current. It has 4 contacts, POLYETHYLENE insulator, and operates b/w -40 to +85°C. Ideal for commercial applications requiring durable surface mount connectors with locking mounting option.
Median Price
$1.540
Lifecycle Status
Suppliers In-Stock
12
In-Stock Inventory
1k+
DigiKey
1+ parts
$1.600
100+ parts
$1.126
1k+ parts
-
10k+ parts
Mouser Electronics
$1.160
$0.967
$0.880
Newark
$1.020
$0.973
Farnell
$0.653
Element14
Nova Conductors
$0.942
Digiode
$1.520
Bristol Electronics
$1.642
$1.018
$0.616
Vyrian
ACDS - Activité Composants Distribution Service
Dan-Mar Components
VNN
Argo Parts USA
Netroflash
Continental Prestige Electronics
$1.190
$0.934
$0.866
Corphita
$1.440
Aztec Data Supply Inc.
$5.067
Andel Nordic
$6.401
$6.145
Assy Fe
High insulation resistance ensures signal integrity and prevents signal loss or interference, making this connector reliable for telecom and datacom applications.
Polyethylene is a durable and reliable insulator material that provides excellent electrical insulation properties, making this connector suitable for demanding environments.
With a high maximum operating temperature, this connector can withstand elevated temperatures without degrading performance, ensuring reliable operation in various conditions.
The low minimum operating temperature allows this connector to function effectively in cold environments, making it versatile for use in different temperature conditions.
Specifically designed for telecom and datacom applications, this connector is optimized for reliable signal transmission and connectivity in these industries.
With a high rated current for signal transmission, this connector can handle significant electrical loads without compromising performance or reliability.
The black insulator color provides a sleek and professional appearance while also offering UV resistance and durability for long-term use.
Having four contacts allows for multiple signals to be transmitted simultaneously, increasing the versatility and efficiency of this connector.
With a high durability rating, this connector can withstand frequent mating and unmating cycles without experiencing wear or degradation, ensuring long-term reliability.
The board mounting type allows for secure and stable installation on a circuit board, ensuring proper alignment and connection for optimal performance.
The small terminal pitch enables high-density PCB layouts, making this connector suitable for compact electronic devices where space is limited.
Surface mount termination simplifies the assembly process and provides a reliable connection between the connector and PCB, enhancing overall product quality and performance.
Low contact resistance ensures minimal signal loss or voltage drop, allowing for efficient and reliable signal transmission through the connector.
The jack body style offers a secure and stable connection, making it ideal for applications where frequent plugging and unplugging is required.
The straight mounting style provides a simple and efficient installation process, ensuring proper alignment and connection for optimal signal transmission.
The telecom modular contact style allows for easy interchangeability and customization, making this connector versatile and adaptable to different application requirements.
The locking mounting option offers additional security and stability, preventing accidental disconnection and ensuring continuous signal transmission in high-vibration environments.
Designed for commercial applications, this connector offers a high level of reliability and performance consistency, making it a trusted choice for various telecom and datacom systems.
Telecom & Datacom Connectors 85513-5115 attributes and parameters. Explore more Telecom & Datacom Connectors devices from Molex
Body or Shell Style:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Material:
Contact Resistance:
Contact Style:
Durability:
Insulation Resistance:
Insulator Color:
Insulator Material:
Mounting Option-1:
Mounting Style:
Mounting Type:
No. of Ports:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Rated Current - Signal:
Reliability:
Sub-Category:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
85513-5115 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
PCN Design/Specification - Mult Devs Alt Sourcing 18/Nov/2021 Mult Devs Drawing Update 18/Feb/2022
PCN Assembly/Origin - Mult Devs Cancel Alternative Supplier 01/Jun/2021
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
ABS25-32.768KHZ-1-T
Abracon
Abracon's ABS25-32.768KHZ-1-T crystal oscillator offers 10 ppm frequency tolerance, 126% stability, and 50000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal operating frequency, such as IoT devices and precision timing systems.
NDT2955
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 3 W; Package Style (Meter): SMALL OUTLINE; Maximum Drain Current (Abs) (ID): 2.5 A;
1N4148
National Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
SS14
Micro Commercial Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358N
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
2N7002
Transys Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Minimum DS Breakdown Voltage: 60 V; Maximum Operating Temperature: 150 Cel;
Bytesonic Electronics
LM358DT
STMicroelectronics
LM358DT by STMicroelectronics is a dual operational amplifier with a max input offset voltage of 9000 uV. It operates at a nominal voltage of 5V and has a min voltage gain of 25000. This amplifier is commonly used in applications requiring high precision and low power consumption.
FDV303N
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Transistor Application: SWITCHING; JESD-609 Code: e3;
1N4148WS
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138K-13
Diodes Incorporated
BSS138K-13 by Diodes Inc. is a N-channel FET with 50V DS breakdown voltage, ideal for switching applications. It features single configuration with built-in diode, operating in enhancement mode. With 3 terminals and 0.31A max drain current, it offers high performance in small outline package style.
SMBJ18CA
Changzhou Starsea Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Vishay Intertechnology
Vishay Intertechnology's LL4148 diode features a max reverse recovery time of 0.004 us, forward voltage of 1 V, and output current of 0.15 A. Ideal for rectification applications in electronics due to its high efficiency and low power dissipation capabilities.
PIC18F4550T-I/PT
Microchip Technology
The Microchip Technology PIC18F4550T-I/PT microcontroller operates at a max clock frequency of 48 MHz with 8-bit architecture. It features 13-Ch 10-Bit ADC channels and USB connectivity, making it suitable for industrial applications requiring high-speed data processing and analog-to-digital conversion. With low power mode and flash ROM programmability, this device offers efficient performance in compact designs.
LL4148GS08
Temic Semiconductors
LL4148GS08 by Temic Semiconductors is a glass diode with a max reverse recovery time of 0.008 us and max forward voltage of 1 V. It is a rectifier diode with a max output current of 0.15 A, ideal for applications requiring fast switching speeds and low power dissipation in electronic circuits.
LM317T
Motorola
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; No. of Outputs: 1; Package Equivalence Code: SIP3,.1TB;
Littelfuse
LM317D2TG
Onsemi
LM317D2TG by Onsemi is an adjustable positive single output standard regulator with a max output current of 1.5A and a max output voltage of 37V. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
BAV99
Surge Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Rugao Dachang Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2007637-8
TE Connectivity
TE Connectivity 2007637-8 is a Telecom & Datacom Connector with LIQUID CRYSTAL POLYMER insulator. Featuring 80 contacts in a 2+2 row configuration, it has a body size of 1.139" x 1.007" x 2.49". Ideal for telecom and datacom applications requiring right-angle mounting with press-fit termination at temperatures ranging from -55 to +105°C.
2178126-2
TE Connectivity 2178126-2 is a Telecom & Datacom Connector with 0.761" body length, 0.547" width, and POLYETHYLENE insulator. It has 8 contacts for PCB mounting in right angle style. Ideal for telecommunications and data communication applications.
1775690-2
TE Connectivity's 1775690-2 is a telecom and datacom connector with a polyethylene insulator, board lock mounting option, and nickel shell finish. It has a max operating temperature of 85°C and is rated for 2.5A signal current. This connector is commonly used in telecommunications and data communication applications.
48037-2000
Molex
The Molex 48037-2000 is a USB connector with a body length of 0.472", body width of 0.177", and body depth of 0.74". It is commonly used in telecom and datacom applications, offering a rated current of 1.5A, insulation resistance of 1GΩ, and durability for up to 10,000 cycles.
P128
Lumberg Connect
P128 by Lumberg Connect is a Telecom & Datacom Connector with gold termination, brass contacts, and polycarbonate shell. It has 6 contacts, rated for 2A signal current, and operates b/w -40 to 125°C. Ideal for commercial telecom applications due to its durability of 2000 cycles and UL reference standard compliance.
5555167-1
Tyco Electronics Amp
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Style: RIGHT ANGLE; DIN Conformance: NO; Filter Feature: NO;
MHRJJ66NFV
Mh Connectors
MHRJJ66NFV by Mh Connectors is a telecom and datacom connector with 6 contacts. It features a glass-filled polyester insulator material and has a UL flammability code of 94V-0. This jack-style connector is designed for board mounting and solder termination, making it suitable for various telecom and datacom applications.
RJHSE-5080-08
Amphenol Communications Solutions
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1000VAC; Contact Resistance: 20 mohm; Rated Current - Signal: 1.5 A;
1050170001
Molex 1050170001 is a Telecom & Datacom Connector with 0.315" body length, 100VAC dielectric voltage, and gold termination. Ideal for telecom applications, it features liquid crystal polymer insulator material, brass contact material, and 5 contacts in a right-angle receptacle design.
449150001
Molex 449150001 is a Telecom & Datacom Connector with 0.46" body length, 500000000 ohm insulation resistance, and 1000VAC dielectric voltage. Ideal for telecom applications, it has UL94V-0 rated clear polycarbonate insulator and male plug contact style for durability in commercial settings.
MP1010RX-5000S
Kycon
The Kycon MP1010RX-5000S is a telecom & datacom connector with 1010 contacts. It features gold flash termination, copper alloy contact material, and polycarbonate insulator. Ideal for commercial applications, it has an insulation resistance of 500M ohm, dielectric voltage of 1400VAC, and operates b/w -55 to 85°C.
RJHSE-5384
Amphenol
RJHSE-5384 by Amphenol is a Telecom & Datacom Connector with 8 contacts, made of stainless steel shell and phosphor bronze contact material. It has a body length of 0.65", width of 0.53", and depth of 0.62". Ideal for board and panel mounting applications, it features matte tin termination finish, UL flammability code 94V-0, and operates b/w -55 to 85°C.
61400416121
Wuerth Elektronik & Kg
61400416121 by Wurth Elektronik is a USB connector with 4 contacts, rated at 1.5A signal current. It features gold-plated mating and termination contacts, with a dielectric voltage of 750VAC. Ideal for telecom & datacom applications, it offers high durability with 1500 cycles and operates b/w -40 to 105°C temperature range.
1-5749111-0
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Termination Contact Finish: TIN OVER NICKEL; UL Flammability Code: 94V-0; Termination Type: IDC;
292303-9
TE Connectivity 292303-9 is a Telecom & Datacom Connector with 0.575" body length, POLYETHYLENE insulator, and 1000000000 ohm insulation resistance. Ideal for board mounting applications, it features a COPPER ALLOY shell material and SURFACE MOUNT termination type. Rated at 1A signal current, it offers durability of 1500 cycles in commercial environments.
2-5174225-5
TE Connectivity 2-5174225-5 is a Telecom & Datacom Connector with 68 contacts, 0.05" pitch, and EMI shielding. It has a body length of 2.516", insulation resistance of 1G ohm, and operates b/w -55°C to 105°C. Ideal for telecom/datacom applications requiring high reliability and signal current up to 1A in commercial settings.
67643-3911
Molex 67643-3911 USB connector features 4 contacts, with matte tin finish and glass-filled polyamide insulation. With a dielectric voltage of 750VAC, it is ideal for telecom/datacom applications. The right-angle receptacle has a solder termination type and operates b/w -40 to 85°C.
5555164-1
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; DIN Conformance: NO; Mounting Type: BOARD AND PANEL; Mating Contact Finish: GOLD (50) OVER NICKEL;
7499111121A
7499111121A by Wurth Elektronik is a Telecom & Datacom Connector with 8 contacts, featuring TIN over Nickel termination finish and Polyethylene insulator. Ideal for board mounting applications in telecom and datacom systems due to its nickel shell finish and copper alloy material.
2013499-1
TE Connectivity's 2013499-1 USB connector has a body length of 0.315", insulation resistance of 100M ohm, and operates b/w -30 to 85°C. Ideal for telecom/datacom applications, it features a polarized housing, surface mount termination, and stainless steel shell for durability.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
85513-5004
The Molex 85513-5004 is a telecom & datacom connector with body dimensions of 0.44" x 0.59" x 0.5". It features insulation resistance of 500M ohm, dielectric voltage withstand of 1000VAC, and contact material made of brass. Ideal for board mounting applications in telecom and datacom systems, offering durability up to 500 cycles at operating temperatures ranging from -40°C to 80°C.
85513-5109
Molex 85513-5109 is a Telecom & Datacom Connector with 8 contacts, rated at 1.5A signal current. Insulation resistance of 500MOhm and operating temperature range from -40 to +85°C make it ideal for commercial applications requiring durability up to 1250 cycles.
85513-5113
The Molex 85513-5113 is a telecom and datacom connector with 8 contacts. It features a surface mount termination and a polyethylene insulator material. This jack-style connector is commonly used in board-mounted applications.
85513-5002
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; UL Flammability Code: 94V-0; Filter Feature: NO; Termination Contact Finish: Tin (Sn);
85513-5013
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1000VAC; Reference Standard: UL;
85510-5119
TELECOM AND DATACOM CONNECTOR; Reliability: COMMERCIAL; Durability: 1250 Cycles; Mating Contact Finish: NOT SPECIFIED; Body or Shell Style: JACK; No. of Ports: 1;
85510-5019
Molex 85510-5019 is a Telecom & Datacom Connector with 0.52"x.25"x.618" dimensions, GLASS FILLED LIQUID CRYSTAL POLYMER insulator, and Tin (Sn) finish. It has 6 contacts for board mounting in UL 94V-0 rated applications.
85510-5120
Molex 85510-5120 is a telecom and datacom connector with 8 contacts. It has an insulation resistance of 500MOhm, operates b/w -40°C to 85°C, and can handle a signal current of 1.5A. Ideal for surface mount applications in commercial settings, it offers durability with 1250 cycles and features a latching mounting option.
85510-5020
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; DIN Conformance: NO; Insulation Resistance: 500000000 ohm;
85513-5001
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1000VAC; Durability: 500 Cycles;
85513-5014
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Minimum Operating Temperature: -40 Cel; Body or Shell Style: JACK;
85513-5114
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Filter Feature: NO; Empty Shell: NO; MIL Conformity: NO;
85513-5116
Molex 85513-5116 is a Telecom & Datacom Connector with Insulation Resistance of 500MΩ, rated for 1.5A signal current. It has POLYETHYLENE insulator, operates b/w -40 to 85°C, and offers durability of 1250 cycles. Ideal for commercial applications requiring reliable surface mount connectors with locking mounting option.
85511-5001
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body or Shell Style: JACK; IEC Conformity: NO; Insulator Material: GLASS FILLED LIQUID CRYSTAL POLYMER;
85513-5102
TELECOM AND DATACOM CONNECTOR; Reliability: COMMERCIAL; Minimum Operating Temperature: -40 Cel; Termination Contact Finish: NOT APPLICABLE; Mating Contact Finish: NOT SPECIFIED; Total No. of Contacts: 6;
85513-5103
TELECOM AND DATACOM CONNECTOR; Reliability: COMMERCIAL; Durability: 1250 Cycles; Terminal Pitch (mm): 1.27; Insulator Material: POLYETHYLENE; Contact Style: TELCOM, MODULAR;
85513-5104
TELECOM AND DATACOM CONNECTOR; Reliability: COMMERCIAL; Terminal Pitch (mm): 1.27; Rated Current - Signal: 1.5 A; Termination Type: SURFACE MOUNT; Mounting Option-1: LOCKING;
85513-5110
TELECOM AND DATACOM CONNECTOR; Reliability: COMMERCIAL; Insulator Material: POLYETHYLENE; Contact Style: TELCOM, MODULAR; Mounting Type: BOARD; Total No. of Contacts: 6;
85513-5111
TELECOM AND DATACOM CONNECTOR; Reliability: COMMERCIAL; Maximum Operating Temperature (Cel): 85; Mounting Style: STRAIGHT; Minimum Operating Temperature: -40 Cel; Insulator Color: BLACK;
85513-5112
TELECOM AND DATACOM CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Contact Material: NOT SPECIFIED; Body or Shell Style: JACK; Mounting Option-1: LOCKING;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved