Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TELECOM AND DATACOM CONNECTOR; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED; Manufacturer Series: 84702;
Median Price
$58.055
Lifecycle Status
Suppliers In-Stock
15
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
$54.410
100+ parts
$45.170
1k+ parts
-
10k+ parts
Verical
$55.290
$53.100
DigiKey
$60.820
$47.580
PEI Genesis
Chip1Stop
$47.100
Master Electronics
$61.430
Farnell
Powell Electronics
$63.440
Nova Conductors
$41.680
Digiode
$42.066
TestEquity
$50.070
IBS Electronics
$63.038
TME
Vyrian
VNN
Andel Nordic
$7.385
$7.089
AZTECH Wire
$11.919
Corphita
$39.852
Continental Prestige Electronics
$40.846
Netroflash
Argo Parts USA
Assy Fe
Perfect Parts
Telecom & Datacom Connectors 84702-0008 attributes and parameters. Explore more Telecom & Datacom Connectors devices from Molex
Connector Type:
Mating Contact Finish:
Contact Material:
Manufacturer Series:
84702-0008 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
PCN Assembly/Origin - Mult Devs Location 08/Jul/2022
PCN Other - Multiple Devices Tooling 06/Aug/2014
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
2N2222A
Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
KSZ9031RNXIC
Microchip Technology
KSZ9031RNXIC by Microchip Technology is a network interface chip with 1 transceiver. It operates at a data rate of 1000 Mbps and has a nominal voltage of 1.2V. This chip is commonly used in industrial applications requiring Ethernet connectivity.
RC0805FR-0710KL
Yageo
Yageo's RC0805FR-0710KL is a 10000 ohm SMT fixed resistor with 1% tolerance and 0.125 W power dissipation. Ideal for applications requiring resistance to operate b/w -55°C to 155°C, such as in automotive electronics or industrial control systems. Features metal glaze/thick film technology and matte tin finish with nickel barrier.
MMBT3904LT1G
Onsemi
MMBT3904LT1G by Onsemi is a NPN BJT with max. collector-emitter voltage of 40V, hFE of 30, and fT of 300MHz. Ideal for small signal applications in electronics due to its compact size, high transition frequency, and low power dissipation capabilities.
DS18B20Z+T&R
Analog Devices
DS18B20Z+T&R by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. The sensor comes in a plastic package suitable for surface mount applications, with a max supply voltage of 5.5V and min of 3V.
1N4148WS
Meritek Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
DS18B20+
DS18B20+ by Analog Devices is a 12-bit temperature sensor with 3.3/5V supply, -55 to 125°C range, and ±0.50°C accuracy. It features a 1-Wire interface for digital output and is commonly used in applications requiring precise temperature monitoring in various industries.
1N4148
Vicor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
M85049/85-08W02
Glenair
CONNECTOR ACCESSORY; MIL Conformity: YES; Material: ALUMINIUM ALLOY; Associated Backshell Military - Specifications: MIL-DTL-38999; Shell Sizes: 08; DIN Conformity: NO;
LM358ADR
Texas Instruments
LM358ADR by Texas Instruments is an operational amplifier with 2 functions, featuring a max input offset voltage of 5000 uV and nominal voltage of 5V. Widely used in applications requiring high voltage gain, it operates within a temperature range of 0-70°C and offers frequency compensation for stability.
LM317T
Sgs-ates Componenti Electronici S P A
Other Regulators; No. of Terminals: 3; JESD-609 Code: e0; Terminal Position: SINGLE; Adjustability: ADJUSTABLE; Maximum Load Regulation (%): 1.5 %;
Taitron Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
RC0402FR-0710KL
Yageo's RC0402FR-0710KL is a 10000 ohm SMT fixed resistor with 1% tolerance, suitable for applications requiring a rated power dissipation of 0.0625 W. With a temperature coefficient of 100 ppm/°C, it operates b/w -55 to 155 °C, making it ideal for various electronic circuits.
BSS138NH6327XTSA2
Infineon Technologies
BSS138NH6327XTSA2 by Infineon is a N-CHANNEL FET with 60V DS Breakdown Voltage, ideal for small signal applications. Operating in Enhancement Mode, it has 0.36W Power Dissipation and 3.5 ohm Drain-Source Resistance. With Gull Wing terminals and AEC-Q101 reference standard, it's suitable for automotive electronics due to its high temperature range of -55 to 150 °C.
LL4148GS08
Temic Semiconductors
LL4148GS08 by Temic Semiconductors is a glass diode with a max reverse recovery time of 0.008 us and max forward voltage of 1 V. It is a rectifier diode with a max output current of 0.15 A, ideal for applications requiring fast switching speeds and low power dissipation in electronic circuits.
MC7805CTG
MC7805CTG by Onsemi is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation. The package style is flange mount with through-hole terminals, ensuring easy installation and reliability in diverse electronic designs.
EEAGA1H4R7
Panasonic
Panasonic EEAGA1H4R7 is a 4.7uF, 50V Aluminum Electrolytic Capacitor with 0.1 Tan Delta and 0.003mA Leakage Current. Ideal for applications requiring high ripple current handling in temperatures ranging from -55 to 105°C.
BSS138BKW,115
NXP Semiconductors
NXP Semiconductors' BSS138BKW,115 is a N-CHANNEL FET with 60V DS breakdown voltage and 0.32A ID. Ideal for SWITCHING applications, it features a built-in diode, 1.6 ohm RDS(on), and operates in ENHANCEMENT MODE. Suitable for surface mount with GULL WING terminals, it meets AEC-Q101 standards.
Fairchild Semiconductor
EU2B-YS3103F
Idec
ROTARY SWITCH;
5557786-1
TE Connectivity
TE Connectivity 5557786-1 is a Telecom & Datacom Connector with EMI Shielding, Matte Tin finish, and PCT Polyester insulator. It has 8 contacts, rated for 1.5A signal current, suitable for board and panel mounting applications. Operating temperature range from -40 to 85°C makes it ideal for commercial use.
10104110-0001LF
Amphenol Communications Solutions
Amphenol's 10104110-0001LF USB connector features a body length of 0.317", insulation resistance of 100MΩ, and dielectric voltage withstand of 100VAC. Ideal for telecom/datacom applications, this right-angle receptacle has a durable stainless steel shell, surface mount termination, and is rated for 1.8A signal current.
PCR-E96LMD+
Honda Tsushin Kogyo
PCR-E96LMD+ by Honda Tsushin Kogyo is a 96-contact telecom/datacom connector with 0.05" pitch, gold-plated contacts, and UL94V-0 flammability rating. It features a dielectric strength of 1100VAC, operating temperatures from -55 to 105°C, and solder termination for board mounting applications. Ideal for commercial use in telecommunications and data communication systems requiring high reliability.
124019032112A
TELECOM AND DATACOM CONNECTOR;
43860-0012
Molex
Molex 43860-0012 is a telecom & datacom connector with 0.645" body length, 0.533" width, and 0.62" depth. Insulation resistance of 500M ohm, operating temp range -40 to 85°C. Ideal for board mounting in commercial applications requiring a female contact style with right-angle mounting option.
53462-0629
53462-0629 by Molex is a Telecom & Datacom Connector with 0.531" body length, 100M ohm insulation resistance, and 125VAC dielectric voltage. Ideal for board mounting in telecom/datacom applications due to its matte tin finish, glass-filled polyamide insulator, and right-angle mounting style.
5-2301996-3
TE Connectivity 5-2301996-3 is a EMI shielded connector with liquid crystal polymer insulator. It has 8 contacts, board lock mounting option, and operates b/w -40 to 85°C. Ideal for telecom & datacom applications due to its nickel finish, UL certification, and solder termination.
SS-7188S-A-NF
Bel Fuse
Bel Fuse SS-7188S-A-NF is a Telecom & Datacom Connector with POLYETHYLENE insulator, 30u plating thickness, and COPPER ALLOY shell. Featuring 8 contacts in a JACK body style, it offers RIGHT ANGLE mounting option for SOLDER termination. Ideal for commercial applications requiring UL-certified connectors with POLARIZED housing and LOCKING board mounting.
5-2337993-2
TE Connectivity 5-2337993-2 is a EMI shielded connector with 0.665" body depth, LCP insulator, and board lock mounting. Ideal for telecom & datacom applications, it has UL94V-0 flammability rating, 30u nickel plating, and operates b/w -40 to 85°C.
74320-4004
Molex 74320-4004 is a Telecom & Datacom Connector with 24 contacts, UL94V-0 rated. Features include Tin (Sn) - Ni termination, 3A signal current rating, and GLASS FILLED POLYMER insulator. Ideal for commercial applications requiring right-angle mounting on boards or panels.
67329-8001
The Molex 67329-8001 USB connector features a body length of 0.57", insulation resistance of 1000000000 ohm, and dielectric voltage of 1050VAC. Ideal for telecom/datacom applications, this male connector has a gold contact finish, glass-filled polyamide insulator, and is rated for 1500 cycles durability.
5557484-1
TE Connectivity 5557484-1 is a Telecom & Datacom Connector with EMI shielding. It features Insulation Resistance of 500MΩ, Body Length 0.71", and UL Flammability Code 94V-0. Ideal for telecom applications requiring durable connectors with high insulation resistance and EMI protection.
455600160
The Molex 455600160 is a Telecom & Datacom Connector with a mating contact pitch of 0.031", insulation resistance of 1Gohm, and dielectric voltage rating of 300VAC. It is used in applications requiring a male connector with surface mount termination for board mounting, featuring a polarized key and UL flammability rating of 94V-0.
629105136821
Wuerth Elektronik & Kg
629105136821 USB connector by Wurth Elektronik features a body length of 0.315", insulation resistance of 1G ohm, and dielectric voltage of 750VAC. Ideal for telecom/datacom applications, it has a liquid crystal polymer insulator, gold termination finish, and operates b/w -40 to 105°C.
1-1747981-6
TE Connectivity 1-1747981-6 is a PREASSEM CONN telecom/datacom connector with 19 contacts, rated at 0.5A. It operates b/w -25 to 70°C, has TIN finish, and can endure 10000 cycles. Ideal for surface mount board applications due to its right angle receptacle design.
UE27-AC54-100
USB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 500VAC; Reference Standard: UL; Contact Style: USB 2.0 A;
RJE1R288236402
Amphenol
TELECOM AND DATACOM CONNECTOR; JESD-609 Code: e3; Termination Contact Finish: TIN;
3001
Winchester Interconnect
TELECOM AND DATACOM CONNECTOR; Contact Gender: MALE; IEC Conformity: NO; Mounting Type: CABLE; DIN Conformance: NO; Mixed Contacts: NO;
48408-0003
The Molex 48408-0003 USB connector features nickel gold termination, polyethylene insulator, and 9 contacts. Ideal for telecom & datacom applications, it is a female receptacle with solder termination on board mounting.
10118194-0001LF
The Amphenol Communications Solutions 10118194-0001LF is a USB connector with 5 contacts, rated at 1.8A signal current and featuring a micro USB 2.0 contact style. It has a body length of 0.317", insulation resistance of 1000000000 ohm, and operates b/w -30 to 80 °C. Ideal for telecom & datacom applications, it offers durability up to 10000 cycles and features surface mount termination with a right-angle mounting style.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
84700-0002
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Mixed Contacts: NO; Mating Contact Finish: NOT SPECIFIED;
84702-0005
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Total No. of Contacts: 8; IEC Conformity: NO; Body or Shell Style: RECEPTACLE;
847023001
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mating Contact Finish: NOT SPECIFIED; Mounting Type: CABLE; DIN Conformance: NO;
847020007
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED; Insulator Material: POLYESTER;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved