Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
BOARD CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; No. of Rows Loaded: 1; Contact Material: BRASS;
Median Price
-
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Digiode
Andel Nordic
$31.020
$21.714
Corphita
Headers & Edge Type Connectors 78047-1542 attributes and parameters. Explore more Headers & Edge Type Connectors devices from Molex
Body Width:
Body Depth:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Pattern:
Contact Style:
Durability:
Insulator Color:
Insulator Material:
Manufacturer Series:
Mating Contact Pitch (inch):
Mounting Option-1:
Mounting Style:
Mounting Type:
No. of Connectors:
No. of PCB Rows:
No. of Rows Loaded:
PCB Contact Pattern:
Plating Thickness (inch):
Polarization Key:
Rated Current - Signal:
Reference Standard:
Reliability:
Sub-Category:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
78047-1542 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.40
SB
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
M39029/58-360
Defense Logistics Agency
CONNECTOR ACCESSORY; Contact Type: CRIMP REAR RELEASE; Mating Contacts: M39029/56-348, M39029/57-354; Insertion Tool Sources: MILITARY; Contact Gender: MALE; Alternate Contact Sources: MILITARY;
MMBT3906LT1G
Onsemi
MMBT3906LT1G by Onsemi is a PNP BJT with VCEsat of 0.4V, hFE of 30, and fT of 250MHz. Ideal for small signal applications in electronics due to its low power dissipation, high transition frequency, and compact SOT-23 package. Suitable for use in temperature-sensitive environments with an operating range from -65°C to 150°C.
BSS138
Diodes Incorporated
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Minimum DS Breakdown Voltage: 50 V; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
LM358N
Samsung
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
BSS138-7-F
Diodes Inc. BSS138-7-F is a N-channel FET with 50V DS breakdown voltage, 0.2A max drain current, and 3.5 ohm RDS(on). Ideal for switching applications in small outline packages with matte tin finish, operating up to 150°C peak reflow temp.
LM78L05ACMX/NOPB
Texas Instruments
LM78L05ACMX/NOPB by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and max current of 0.1A. It operates b/w 0-125°C, has a dropout voltage of 1.6V, and can handle input voltages up to 30V making it ideal for various electronic applications requiring stable power supply.
LL4148
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
NE555D
NXP Semiconductors
SQUARE; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: LSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
1N4148WT
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM107H
Rochester Electronics
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Code: TO-99; Package Shape: ROUND;
ERJ6ENF10R0V
Panasonic
Panasonic ERJ6ENF10R0V is a 10 ohm fixed resistor with 1% tolerance, suitable for surface mount applications. With a rated power dissipation of 0.125W and operating voltage of 150V, it operates b/w -55°C to 155°C. Its metal glaze/thick film technology ensures stable performance in various electronic circuits.
Silicon Group
FDC5614P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.6 W; Transistor Application: SWITCHING; Maximum Drain Current (ID): 3 A;
BAV99LT1G
BAV99LT1G by Onsemi is a series connected diode with 2 elements in a small outline package. It has a max reverse recovery time of 0.006 us and can handle up to 100V repetitive peak reverse voltage. Ideal for rectification applications, this diode operates b/w -65°C to 150°C temperature range.
2N7002
Rectron
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Operating Mode: ENHANCEMENT MODE; Maximum Operating Temperature: 150 Cel; Terminal Form: GULL WING;
PIC18F4550-I/P
Microchip Technology
PIC18F4550-I/P by Microchip Technology is an 8-bit microcontroller with a max clock frequency of 48 MHz. It features 13-Ch 10-Bit ADC channels and USB connectivity, making it ideal for industrial applications requiring low power consumption and high-speed data processing. With 2048 RAM bytes and 256 Data EEPROM size, this CMOS technology-based microcontroller offers versatile performance in various embedded systems.
SMBJ18CA
Forward International Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Nominal Breakdown Voltage: 21.05 V; Maximum Clamping Voltage: 29.2 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
SS14
Surge Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
Micro Commercial Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358AN
Philips Semiconductors
61303211021
Wuerth Elektronik & Kg
61303211021 by Wurth Elektronik is a BOARD CONNECTOR with 32 contacts, rated at 3A signal current. Featuring a mating contact pitch of 0.1", it has gold (Au) - nickel (Ni) finish and operates b/w -40 to 125 °C. Ideal for commercial applications requiring high insulation resistance and UL certification.
26-60-6100
Molex
The Molex 26-60-6100 is a board connector with 10 contacts, featuring a dielectric voltage of 1000VAC and insulation resistance of 1Gohm. With a temperature range from -40 to 80°C, it is ideal for commercial applications requiring reliable connections in headers & edge type connectors.
50-57-9403
Molex 50-57-9403 is a board connector with 0.1" pitch, suitable for commercial applications. It features a body length of 0.299", insulation resistance of 10^10 ohm, and operating temperature range from -40 to 105°C. Ideal for use in cable mounting scenarios with crimp termination and female contact gender.
4164
Norcomp Interconnect Devices
BOARD CONNECTOR; IEC Conformity: NO; DIN Conformance: NO; MIL Conformity: NO;
853-87-054-30-001101
Preci-dip Sa
853-87-054-30-001101 by Preci-dip Sa is a BOARD CONNECTOR with 54 contacts, BERYLLIUM COPPER material, and TIN finish. It is ideal for surface mount applications in headers & edge type connectors, offering a terminal pitch of 1.27mm and UL Flammability Code of 94V-0.
53261-0671
The Molex 53261-0671 is a board connector with 6 contacts, rated at 1A signal current. Featuring a mating contact pitch of 0.049", it has an insulation resistance of 100M ohm and operates b/w -40°C to 105°C. Ideal for applications requiring a durable, right-angle mounting style with surface mount termination.
3-6318491-6
TE Connectivity
3-6318491-6 by TE Connectivity is a 2-row board connector with 220 contacts. Featuring a mating contact pitch of 0.02", it has an insulation resistance of 2M ohm and operates b/w -40 to 85°C. Ideal for commercial applications, this male plug connector offers a rated current of 0.5A and durability of 30 cycles.
DM3AT-SF-PEJM5(40)
Hirose Electric
The Hirose Electric DM3AT-SF-PEJM5(40) is a PCB connector with 0.043" mating contact pitch, GOLD finish, and 1000000000 ohm insulation resistance. Ideal for commercial applications, it features a liquid crystal polymer insulator, operates b/w -25 to 85 °C, and offers durability of 10000 cycles.
DT06-2S-E008
Deutsch
BOARD CONNECTOR; Manufacturer Series: DT;
SHF-105-01-L-D-SM-LC
Samtec
The Samtec SHF-105-01-L-D-SM-LC is a 2-row, 10-contact board connector with Tin-Nickel finish. Featuring a terminal pitch of 1.27mm, it is designed for surface mount applications. Ideal for use in various electronic devices requiring male connectors with straight mounting style.
280371-2
TE Connectivity 280371-2 is a BOARD CONNECTOR with 4 contacts, 0.1" pitch, and POLYETHYLENE insulator. It has a temperature range of -65 to 105°C and features BRASS contacts with Tin finish. Ideal for commercial applications requiring reliable connections in electrical systems.
MEM2067-02-180-00-A
Global Connector Technology
MEM2067-02-180-00-A by Global Connector Technology is a PCB connector with 8 contacts, mating pitch of 0.04", and termination finish of TIN OVER NICKEL. It features liquid crystal polymer insulator material and is UL certified for use in various applications requiring a right angle mounting style on the board.
324-91-162-41-002000
Mill-max Mfg
BOARD CONNECTOR; Contact Material: BERYLLIUM COPPER; JESD-609 Code: e0; Termination Contact Finish: Tin/Lead (Sn/Pb) - with Nickel (Ni) barrier; Mating Contact Finish: NOT SPECIFIED;
50-37-5063
The Molex 50-37-5063 is a board connector with 0.098" mating contact pitch, 0.685" body length, and 1000000000 ohm insulation resistance. It is used in applications requiring a durable female connector with 6 contacts, crimp termination, and POLYBUTYLENE TEREPHTHALATE insulator material.
1761606-3
TE Connectivity's 1761606-3 is a board connector with 10 contacts, 2 rows, and a mating contact pitch of 0.1". It features a body length of 0.8", insulation resistance of 5G ohm, and operates b/w -65°C to 105°C. Ideal for commercial applications requiring reliable signal connections on PCBs.
75869-101LF
Amphenol Communications Solutions
75869-101LF by Amphenol is a 2-row board connector with 10 contacts. It features a mating contact pitch of 0.1", insulation resistance of 20Gohm, and dielectric voltage withstand of 1414VAC. Ideal for commercial applications requiring reliable signal connections in PCBs with operating temperatures from -65 to 125°C.
693071010811
PCB CONNECTOR; Termination Contact Finish: GOLD; JESD-609 Code: e4; Mating Contact Finish: GOLD; Contact Material: COPPER ALLOY;
VHR-9N
J S T Mfg
VHR-9N by J S T Mfg is a 9-contact BOARD CONNECTOR with 94V-0 UL Flammability Code. It features FEMALE contacts, RIGHT ANGLE mounting style, and CRIMP termination type. Ideal for CABLE mounting applications in Headers & Edge Type Connectors category.
475532001
PCB CONNECTOR; Option: GENERAL PURPOSE; DIN Conformance: NO; MIL Conformity: NO; Contact Material: NOT SPECIFIED; IEC Conformity: NO;
53261-0571
The Molex 53261-0571 is a board connector with a mating contact pitch of 0.049", insulation resistance of 100MΩ, and a max operating temperature of 105°C. It is commonly used in applications requiring surface mount termination and right angle mounting options.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved