Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Molex 35362-1250 is a board connector with 12 contacts, 0.079" pitch, and matte tin finish. It has a rectangular PCB contact pattern and is used in commercial applications requiring reliable connections on boards with UL flammability rating of 94V-0.
Median Price
$0.720
Lifecycle Status
Suppliers In-Stock
22
In-Stock Inventory
1k+
Heilind Electronics
1+ parts
$0.365
100+ parts
-
1k+ parts
10k+ parts
Interstate Connecting
Adafruit Industries
$0.454
Mouser Electronics
$0.521
$0.442
$0.376
Farnell
$0.769
$0.410
$0.328
DigiKey
$0.790
$0.545
$0.436
Element14
$0.863
$0.657
$0.477
$0.398
Misumi USA
$1.290
Newark
$0.592
$0.512
PEI Genesis
Chip1Stop
$0.196
$0.151
Verical
$0.765
Digiode
$0.347
Nova Conductors
$0.447
IBS Electronics
$0.533
Vyrian
VNN
Bristol Electronics
Semtec, LLC
Sensible Micro Corp
$0.478
$0.441
EMSNET
Semi Source
Semicontronic
$0.167
$0.163
$0.162
Corphita
Argo Parts USA
$0.440
$0.427
Netroflash
Advanced Electronics
Continental Prestige Electronics
$0.721
$0.434
$0.346
Andel Nordic
$1.329
$1.276
Aztec Data Supply Inc.
$3.201
Perfect Parts
Infinite Electronics LLP (Excess)
Assy Fe
EMSNET (Excess)
Robosynatics
$9.247
Lucentia Tech
SIE Connect GmbH (Excess)
Close contact pitch enables efficient signal transmission and ensures a secure connection.
A longer body length provides stability and secure attachment to the board.
The slim body width allows for compact installation and saves space on the board.
Matte tin finish offers corrosion resistance and ensures long-lasting durability.
A deeper body depth provides additional support and enhances the overall stability of the connector.
Polyamide insulator material offers excellent electrical insulation properties and enhances safety during operation.
Specifically designed for board connections, ensuring compatibility and seamless integration.
UL 94V-0 flammability rating indicates high fire resistance and compliance with industry safety standards.
Ample number of contacts allow for multiple connections and versatile usage options.
Single connector simplifies installation and maintenance processes.
Board mounting type offers secure attachment to the PCB and ensures stability during operation.
2mm terminal pitch provides standard spacing for easy connection and compatibility with various devices.
Rectangular contact pattern ensures uniform connection points and facilitates reliable signal transmission.
Solder termination ensures a strong and durable connection between the connector and the board.
Male contact gender is commonly used for board-to-board connections and provides reliable signal transmission.
Receptacle body style facilitates easy insertion and removal of connectors for maintenance purposes.
Straight mounting style simplifies installation and ensures alignment with other components on the board.
Square pin socket contact style offers secure connection and minimizes signal loss during transmission.
Optimal terminal length ensures proper contact with the board, enhancing signal transmission efficiency.
Locking mounting option provides additional security and prevents accidental disconnection of the connector.
Rectangular contact pattern ensures compatibility with standard PCB layouts and facilitates easy installation.
Commercial grade reliability ensures consistent performance and durability for various industrial applications.
Headers & Edge Type Connectors 35362-1250 attributes and parameters. Explore more Headers & Edge Type Connectors devices from Molex
Additional Features:
Body Width:
Body Depth:
Body Length:
Body or Shell Style:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Pattern:
Contact Style:
DIN Conformance:
Filter Feature:
IEC Conformity:
Insulator Material:
JESD-609 Code:
MIL Conformity:
Mating Contact Pitch (inch):
Mating Info.:
Mixed Contacts:
Mounting Option-1:
Mounting Style:
Mounting Type:
No. of Connectors:
No. of PCB Rows:
No. of Rows Loaded:
Option:
PCB Contact Pattern:
Reference Standard:
Reliability:
Sub-Category:
Terminal Length:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
UL Flammability Code:
35362-1250 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.40
SB
PCN Assembly/Origin - 33536yyyy0 15/Dec/2017
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
SMBJ18CA
Telefunken Microelectronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Philips Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Terminal Finish: MATTE TIN; Maximum Operating Temperature: 200 Cel; Maximum Output Current: .15 A; JESD-609 Code: e3;
BAV99
NXP Semiconductors
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
EPCS4SI8N
Altera
CONFIGURATION MEMORY; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Parallel or Serial: SERIAL;
FT232RQ-REEL
FTDI
FTDI's FT232RQ-REEL is a USB bus controller with 32 terminals, operating at 3.3-5.25V. It supports data transfer rates up to 60MBps and clock frequency of 12.02MHz, suitable for RS232/RS422/RS485 interfaces in various applications like industrial automation and communication systems.
LL4148
Itt Components
RECTIFIER DIODE; Surface Mount: YES; Maximum Reverse Recovery Time: .005 us; Config: SINGLE; Maximum Operating Temperature: 200 Cel; Maximum Non Repetitive Peak Forward Current: 1 A;
Diodes Incorporated
DS18B20Z+T&R
Maxim Integrated
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Minimum Operating Temperature: -55 Cel; Package Body Material: PLASTIC/EPOXY;
LM317T
Onsemi
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; JESD-30 Code: R-PSFM-T3; Adjustability: ADJUSTABLE; Package Equivalence Code: SIP3,.1TB;
STMicroelectronics
MBRS3200T3G
MBRS3200T3G by Onsemi is a Schottky rectifier diode with a max output current of 3A and a max forward voltage of 0.59V. It operates in temperatures ranging from -65°C to 175°C, making it suitable for power applications. The diode has a peak repetitive reverse voltage of 200V and is designed for surface mount installation in electronic circuits.
LM358M
Raytheon Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
2N2222A
New Jersey Semiconductor Products
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Package Shape: ROUND;
2N7002
Comchip Technology
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Operating Temperature: 150 Cel; Operating Mode: ENHANCEMENT MODE;
M39029/56-351
Amphenol
CONNECTOR ACCESSORY; Minimum Operating Temperature: -65 Cel; Additional Features: STANDARD: MIL-DTL-38999; Contact Gender: FEMALE; MIL-Connector Accessory Name: CONTACT; Associated Military - Specifications: MIL-DTL-38999;
LM358AN
Fairchild Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
1N4148WS
First Components International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Motorola
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Package Body Material: PLASTIC/EPOXY; Qualification: Not Qualified; Minimum Operating Temperature: -55 Cel;
LM358N
LM107H/883
Texas Instruments
LM107H/883 by Texas Instruments is a MIL-STD-883 compliant operational amplifier with 3000uV max input offset voltage, 80dB common mode reject ratio, and 250kHz unity gain bandwidth. Ideal for military applications due to its -55 to 125 °C operating temperature range and robust metal package body material.
3674
Lumberg Connect
3674 by Lumberg Connect is a BOARD CONNECTOR with 25 contacts, Tin (Sn) finish. It has a Terminal Pitch of 5mm and UL Flammability Code of 94V-0. Ideal for applications requiring RIGHT ANGLE mounting in Headers & Edge Type Connectors.
1-102387-1
TE Connectivity
TE Connectivity 1-102387-1 is a 2-row board connector with 60 contacts, rated at 3A signal current. Featuring a mating contact pitch of 0.1", it has a body length of 3.1" and operates b/w -65°C to 105°C. Ideal for commercial applications requiring reliable female connectors with crimp termination in black polyethylene insulator material.
90120-0762
Molex
Molex 90120-0762 is a board connector with 0.1" pitch, suitable for commercial applications. Featuring bright tin finish, it offers 3A signal current rating and withstands up to 1000VAC. With a durable design lasting 30 cycles, this male connector is ideal for PCB mounting with solder termination.
DF11-20DP-2DS(52)
Hirose Electric
DF11-20DP-2DS(52) by Hirose Electric is a 20-contact board connector with 0.079" pitch, suitable for commercial applications. It features a dielectric voltage of 650VAC, insulation resistance of 1Gohm, and operates b/w -30 to 85°C. Ideal for PCB mounting with solder termination and right-angle style.
MTCB1X-XXX-106CS025
BOARD CONNECTOR;
HTSS-110-01-T-DV
Samtec
Samtec's HTSS-110-01-T-DV is a 20-contact male board connector with 0.1" pitch, ideal for commercial applications. Featuring TIN over nickel finish, it offers high insulation resistance of 5G ohm and withstands up to 1414VAC. With liquid crystal polymer insulator, it operates b/w -55°C to 105°C efficiently.
TSW-102-07-L-S
Samtec's TSW-102-07-L-S is a 2-contact board connector with a 0.1" pitch, ideal for commercial applications. Featuring matte tin over nickel termination, gold mating finish, and phosphor bronze contacts, it operates b/w -55°C to 125°C. With UL certification and a 94V-0 flammability rating, this male connector offers reliable performance in various electronic devices.
SM03B-SRSS-TB(LF)(SN)
J S T Mfg
J S T Mfg SM03B-SRSS-TB(LF)(SN) is a 3-contact board connector with 0.039" pitch, 100000000 ohm insulation resistance, and 500VAC dielectric voltage. Ideal for PCB applications requiring male contact, surface mount termination, and right-angle mounting with locking option.
8-188275-0
TE Connectivity 8-188275-0 is a 2-row board connector with 10 contacts, rated for 1.5A signal current at 100V. Featuring a mating contact pitch of 0.05", it has a body length of 0.578" and insulation resistance of 1Gohm. Ideal for PCB applications requiring high reliability and operating temperatures from -40 to +105°C.
1-640250-5
TE Connectivity 1-640250-5 is a board connector with 15 contacts, 0.156" pitch, and 6.5A signal current rating. It features glass-filled polyamide insulation, operates b/w -55 to 105°C, and has a durability of 25 cycles. Ideal for commercial applications requiring reliable female connectors with crimp termination in a polarized housing design.
71918-140LF
Amphenol Communications Solutions
The Amphenol Communications Solutions 71918-140LF is a 40-contact board connector with 0.1" mating contact pitch, suitable for commercial applications. It features a 707VAC dielectric voltage rating and operates b/w -65°C to 125°C temperature range. With matte tin over nickel finish, it offers reliable signal current of up to 3A.
851-43-030-30-001000
Mill-max Mfg
The Mill-max Mfg 851-43-030-30-001000 is a BOARD CONNECTOR with 30 contacts, TIN finish. It has a terminal pitch of 1.27mm and is designed for SURFACE MOUNT applications. The connector features FEMALE contact gender and SOCKET body style, suitable for STRAIGHT mounting on boards.
22-23-2041
The Molex 22-23-2041 is a board connector with 0.1" pitch, suitable for commercial applications. It features brass contacts with matte tin finish, white polyamide insulator, and 4 male pins in a rectangular pattern. The connector has a total of 4 contacts and offers high insulation resistance of 1000000000 ohm.
FTSH-105-01-L-DV-K-P-TR
Samtec's FTSH-105-01-L-DV-K-P-TR is a 2-row, 10-contact board connector with a mating contact pitch of 0.05". Featuring liquid crystal polymer insulator material and phosphor bronze contacts plated with gold over nickel, it operates b/w -55°C to 125°C. Ideal for commercial applications requiring reliable surface mount connections on PCBs.
SHF-105-01-L-D-SM-K-TR
Samtec SHF-105-01-L-D-SM-K-TR is a 2-row board connector with 10 contacts, featuring a mating contact pitch of 0.05" and matte tin termination finish. Ideal for commercial applications, it has a temperature range from -55 to 125°C and can handle a signal current of up to 1.75A.
5103309-1
Tyco Electronics Amp
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Total No. of Contacts: 10; Mixed Contacts: NO; UL Flammability Code: 94V-0;
SM05B-SRSS-TB(LF)(SN)
SM05B-SRSS-TB(LF)(SN) by J S T Mfg is a 5-contact board connector with 0.039" pitch, ideal for PCB applications. Featuring TIN COPPER finish, POLYAMIDE insulator, and 500VAC dielectric voltage rating. Operating b/w -25 to 85 °C, it offers male contact gender and right-angle mounting style.
SM04B-SRSS-TB(LF)(SN)(P)
SM04B-SRSS-TB(LF)(SN)(P) by J S T Mfg is a 2-row BOARD CONNECTOR with 0.039" pitch, 1A signal current, and 100M ohm insulation resistance. Ideal for board mounting applications requiring a male contact gender, POLYAMIDE insulator material, and operating temperatures from -25 to 85°C.
SM04B-SRSS-TB(LF)(SN)
SM04B-SRSS-TB(LF)(SN) by J S T Mfg is a 4-contact board connector with 0.039" pitch, 100000000 ohm insulation resistance, and 500VAC dielectric voltage. Ideal for PCB applications requiring male contacts, surface mount termination, and right-angle mounting.
500998-0900
500998-0900 by Molex is a PCB connector with 9 contacts, 0.098" pitch, and 1.138" body length. Ideal for commercial applications, it offers high durability with 10000 cycles and operates b/w -25 to 90°C temperatures.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
35362-0450
Molex 35362-0450 is a board connector with 4 contacts, featuring 0.079" mating pitch and 0.406" body length. It uses matte tin finish, brass contact material, and polyamide insulator. Ideal for commercial applications requiring reliable rectangular PCB contact patterns.
35362-0250
Molex 35362-0250 is a board connector with 2 contacts, featuring TIN COPPER finish. It has a mating contact pitch of 0.079" and body dimensions of 0.303" x 0.217" x 0.335". Ideal for commercial applications requiring reliable rectangular PCB contact patterns and solder termination.
35362-0350
Molex 35362-0350 is a board connector with 3 contacts, featuring a mating contact pitch of 0.079" and body dimensions of 0.382" x 0.217" x 0.335". It uses TIN over copper termination for reliability in commercial applications.
353630460
Molex 353630460 is a board connector with 0.079" contact pitch, 1000000000 ohm insulation resistance, and 500VAC dielectric voltage. Ideal for commercial applications, it features POLYAMIDE insulator material, matte tin finish, and operates b/w -40 to 105 °C.
35362-0550
35362-0550 by Molex is a 5-contact board connector with 0.079" pitch, 0.484" body length, and TIN finish. Ideal for commercial applications, it features a polyamide insulator, UL 94V-0 flammability rating, and solder termination.
35362-0650
The Molex 35362-0650 is a board connector with 6 contacts, featuring a mating contact pitch of 0.079" and body dimensions of 0.563" x 0.217" x 0.335". It uses matte tin finish on brass contacts, suitable for commercial applications requiring a reliable rectangular PCB contact pattern.
353630860
Molex 353630860 is a board connector with 8 contacts, featuring a mating contact pitch of 0.079", insulation resistance of 1Gohm, and dielectric voltage rating of 500VAC. Ideal for applications requiring a durable, right-angle mounting style with solder termination and male contact gender.
35362-0950
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; UL Flammability Code: 94V-0;
353631260
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 500VAC; No. of Connectors: ONE;
35362-0750
BOARD CONNECTOR; Body Depth: .335 inch; Mounting Style: STRAIGHT; Contact Material: BRASS; Mating Contact Pitch (inch): 0.079; Termination Contact Finish: MATTE TIN;
353630360
35362-1150
BOARD CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; No. of Rows Loaded: 1; Termination Type: SOLDER KINKED LEADS;
35362-0850
35362-0850 by Molex is a board connector with 8 contacts, 0.079" pitch, and 0.72" body length. It features matte tin finish, polyamide insulator, and solder termination. Ideal for commercial applications requiring a reliable rectangular contact pattern on PCBs with UL flammability rating of 94V-0.
353630560
Molex 353630560 is a board connector with 0.079" pitch, 1000000000 ohm insulation resistance, and 0.217" body width. Ideal for applications requiring a durable male connector with matte tin finish, POLYAMIDE insulator, and operating temperatures from -40 to 105 °C.
35362-1450
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Additional Features: SHERLOCK, POLARIZED, SHROUDED;
353630660
Molex 353630660 is a board connector with 6 contacts, 0.079" pitch, and matte tin finish. It has a temperature range of -40 to 105°C, suitable for commercial applications requiring durable right-angle mounting with solder termination. The UL-listed connector features polarization keying and polyamide insulation for reliable performance in various electronic devices.
35362-1050
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; DIN Conformance: NO;
353630260
The Molex 353630260 is a board connector with a mating contact pitch of 0.079 inches and insulation resistance of 1,000,000,000 ohms. It is commonly used in commercial applications due to its durability and right angle mounting style.
353630760
35362-1223
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; PCB Contact Pattern: RECTANGULAR;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved