Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
35362-1050 by Molex is a 10-contact board connector with 0.079" mating pitch, 0.878" body length, and 0.217" body width. Ideal for commercial applications, it features matte tin finish, polyamide insulator material, and UL 94V-0 flammability code.
Median Price
$0.474
Lifecycle Status
Suppliers In-Stock
27
In-Stock Inventory
1k+
Arrow
1+ parts
$0.350
100+ parts
$0.308
1k+ parts
$0.282
10k+ parts
$0.257
Heilind Electronics
$0.439
-
$0.369
$0.357
Interstate Connecting
Bürklin Elektronik
$0.550
$0.242
Farnell
$0.632
$0.397
$0.337
Mouser Electronics
$0.660
$0.446
$0.336
$0.316
DigiKey
$0.790
$0.517
$0.407
$0.333
Element14
$0.866
$0.623
$0.448
$0.366
Misumi USA
$1.830
Newark
$0.509
Chip1Stop
$0.402
$0.323
TTI
$0.332
$0.314
$0.296
Master Electronics
$0.221
Verical
$0.291
Digiode
Nova Conductors
$0.401
Velocity Electronics
Vyrian
IBS Electronics
$0.227
VNN
ComSIT Distribution GmbH
Bristol Electronics
Sunrise Surplus Inc.
Atlantic Semiconductor
Ashlea Components Ltd
Elcom Components
Prism Electronics
Corphita
$0.315
Continental Prestige Electronics
$0.393
Argo Parts USA
$0.389
Netroflash
Andel Nordic
$3.626
$3.481
Perfect Parts
Assy Fe
Kepictronics
GreenTree Electronics
Speed Components Ltd (Excess)
Close contact pitch allows for a compact design and efficient use of space on the PCB.
The longer body length provides stability and ensures a secure connection.
The narrow body width allows for multiple connectors to be placed closely together on the board.
Matte tin finish provides good conductivity and corrosion resistance for reliable connections.
Adequate body depth ensures that the contacts are well protected within the connector.
Polyamide material offers good insulation properties and durability for long-lasting performance.
Specifically designed for use on a printed circuit board, ensuring compatibility and easy integration.
UL 94V-0 rating indicates high fire resistance, ensuring safety in case of any electrical faults.
Provides ample connectivity options for various applications requiring multiple connections.
Designed for secure mounting on a PCB, maintaining stability during operation.
Solder termination offers a reliable and durable connection for long-term use.
Headers & Edge Type Connectors 35362-1050 attributes and parameters. Explore more Headers & Edge Type Connectors devices from Molex
Additional Features:
Body Width:
Body Depth:
Body Length:
Body or Shell Style:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Pattern:
Contact Style:
DIN Conformance:
Filter Feature:
IEC Conformity:
Insulator Material:
MIL Conformity:
Manufacturer Series:
Mating Contact Pitch (inch):
Mating Info.:
Mixed Contacts:
Mounting Option-1:
Mounting Style:
Mounting Type:
No. of Connectors:
No. of PCB Rows:
No. of Rows Loaded:
Option:
PCB Contact Pattern:
Reference Standard:
Reliability:
Sub-Category:
Terminal Length:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
UL Flammability Code:
35362-1050 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.40
SB
PCN Assembly/Origin - 33536yyyy0 15/Dec/2017
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
1N4148WS
Jiangsu Changjiang Electronics Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SS14
Rugao Dachang Electronic
RECTIFIER DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 40 V; Maximum Forward Voltage (VF): .55 V; No. of Elements: 1; Technology: SCHOTTKY;
CRGCQ0805F10R
TE Connectivity
TE Connectivity's CRGCQ0805F10R is a 10 ohm fixed resistor with 1% tolerance and 400 ppm/°C temperature coefficient. It is a surface mount thick film resistor in an 0805 package, suitable for applications requiring precise resistance values in compact electronic circuits.
BAV99
Toshiba
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
SN65HVD234DR
Texas Instruments
SN65HVD234DR by Texas Instruments is an 8-terminal interface circuit with a data rate of 1 Mbps. Operating temperature ranges from -40 to 125 °C, making it ideal for automotive applications. With a supply voltage of 3.3 V and low current draw of 6 mA, it's suitable for network interfaces in compact designs.
BSS138NH6327XTSA2
Infineon Technologies
BSS138NH6327XTSA2 by Infineon is a N-CHANNEL FET with 60V DS Breakdown Voltage, ideal for small signal applications. Operating in Enhancement Mode, it has 0.36W Power Dissipation and 3.5 ohm Drain-Source Resistance. With Gull Wing terminals and AEC-Q101 reference standard, it's suitable for automotive electronics due to its high temperature range of -55 to 150 °C.
LM7805CT/NOPB
National Semiconductor
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Voltage Tolerance: 5 %; Operating Temperature (TJ-Max): 125 Cel; Maximum Output Voltage-1: 5.25 V;
LL4148
Micronas Semiconductor Holding Ag
RECTIFIER DIODE; Surface Mount: YES; No. of Phases: 1; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Output Current: .2 A; Maximum Forward Voltage (VF): 1.2 V;
LM358M
LM358M by Texas Instruments is an Operational Amplifier with 2 functions, featuring a max input offset voltage of 9000 uV and a nominal voltage of 5 V. It is commonly used in applications requiring high common mode rejection ratio and low bias current, such as sensor interfaces and signal conditioning circuits.
Vishay Telefunken
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Changzhou Starsea Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
DS18B20Z+T&R
Maxim Integrated
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Minimum Operating Temperature: -55 Cel; Package Body Material: PLASTIC/EPOXY;
Daco Semiconductor
2N2222A
Nte Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 1 W; Maximum Collector Current (IC): .8 A; Terminal Form: WIRE;
LM358N
Harris Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
DS18B20Z+
Analog Devices
DS18B20Z+ by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.
SMBJ18CA
Concord Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Polarity: BIDIRECTIONAL; Maximum Clamping Voltage: 29.2 V;
M39029/58-360
Conesys
CONNECTOR ACCESSORY; MIL Conformity: YES; Mating Contacts: M39029/57-354; Terminal Type: CRIMP; DIN Conformity: NO; MIL-Connector Accessory Name: CONTACT;
Rfe International
BSS138-7-F
Diodes Incorporated
Diodes Inc. BSS138-7-F is a N-channel FET with 50V DS breakdown voltage, 0.2A max drain current, and 3.5 ohm RDS(on). Ideal for switching applications in small outline packages with matte tin finish, operating up to 150°C peak reflow temp.
M50-3600542R
Harwin Plc
The Harwin PLC M50-3600542R is a 10-contact female board connector with a mating contact pitch of 0.05", ideal for PCB applications. Featuring tin finish with nickel barrier, it offers high insulation resistance of 1 Gohm and operates b/w -40°C to 105°C. With durability up to 300 cycles, this UL-rated connector is suitable for commercial use in various electronic devices.
61300311121
Wuerth Elektronik & Kg
61300311121 by Wurth Elektronik is a board connector with 0.1" mating contact pitch, 3A signal current rating, and gold over nickel termination finish. It is used in commercial applications, featuring a temperature range of -40 to 125°C and UL reference standard compliance.
FTSH-107-01-L-DV-K-A
Samtec
The Samtec FTSH-107-01-L-DV-K-A is a 2-row, 14-contact board connector with Tin-Nickel finish. Operating from -55°C to 125°C, it has a pitch of 1.27mm and UL94V-0 flammability rating. Ideal for surface mount applications in electronics requiring male connectors with straight mounting style.
BM15B-SRSS-TB(LF)(SN)
J S T Mfg
BM15B-SRSS-TB(LF)(SN) by J S T Mfg is a 15-contact board connector with 0.039" pitch, suitable for PCB mounting. Featuring TIN finish, it has an insulation resistance of 100M ohm and operates b/w -25 to 85°C. Ideal for applications requiring male contacts, such as in electronics or telecommunications equipment.
52271-1079
Molex
Molex 52271-1079 is a FFC/FPC connector with 10 contacts, rated at 0.5A signal current. It features a mating contact pitch of 0.039", insulation resistance of 100M ohm, and dielectric voltage rating of 500VAC. Ideal for board mounting applications requiring durability, reliability, and high temperature tolerance up to 85°C.
B5B-XH-A(LF)(SN)
B5B-XH-A(LF)(SN) by J S T Mfg is a 5-contact BOARD CONNECTOR with 0.098" pitch, suitable for -25 to 85°C temp range. Features include 1000000000 ohm insulation resistance, tin over copper finish, and UL94V-0 flammability rating. Ideal for applications requiring reliable signal transmission in electronic devices.
53398-0271
53398-0271 by Molex is a board connector with 0.049" mating contact pitch, 100M ohm insulation resistance, and 39u plating thickness. Ideal for applications requiring a male blade pin-skt contact style, it offers a durability of 30 cycles and operates b/w -40 to 85°C temperature range.
B6B-EH-A(LF)(SN)
B6B-EH-A(LF)(SN) by J S T Mfg is a 6-contact male board connector with 0.098" mating contact pitch, 0.689" body length, and 0.15" body width. It features gold mating contact finish, solder termination type, and polyamide66 insulator material. Ideal for applications requiring a straight mounting style and rectangular contact pattern.
B14B-PUDSS-1(LF)(SN)
B14B-PUDSS-1(LF)(SN) by J S T Mfg is a 1-row loaded board connector with 14 contacts. It has a terminal pitch of 2mm and uses solder termination. This connector is commonly used in applications requiring male contact gender and straight mounting style.
DF13-3S-1.25C
Hirose Electric
DF13-3S-1.25C by Hirose Electric is a 3-contact board connector with 0.049" pitch, 500VAC voltage resistance, and 85°C max operating temp. Ideal for commercial applications, it features female contacts, beige insulator color, and UL94V-0 flammability rating for reliable signal transmission in various environments.
2-5767004-2
TE Connectivity 2-5767004-2 is a board stacking connector with 39 contacts, rated at 11.5A for signal current. It features a mating contact pitch of 0.025", insulation resistance of 2M ohm, and dielectric voltage withstand of 500VAC. Ideal for commercial applications requiring reliable connections in temperatures ranging from -55 to 125°C.
TSM-104-01-T-SH
Samtec's TSM-104-01-T-SH header connector features a 0.1" contact pitch, matte tin finish, and liquid crystal polymer insulator. Ideal for board mounting with a temperature range of -55 to 105°C, it has a right-angle male contact style suitable for commercial applications.
51110-0450
Molex 51110-0450 is a 2-row board connector with 0.079" contact pitch, suitable for commercial applications. Featuring polyester insulation, it has 4 contacts with 40mohm resistance and operates b/w -40 to 105°C. Ideal for cable mounting, it offers a polarization key and UL94V-0 flammability rating.
61201021621
61201021621 by Wurth Elektronik is a board connector with 10 contacts, gold finish, and 3A signal current rating. It features a mating contact pitch of 0.1", insulation resistance of 1Gohm, and operates b/w -40 to 125°C. Ideal for commercial applications requiring reliable connections on PCBs with rectangular contact patterns.
17211102102
Harting Electronics & Kg
17211102102 by Harting Electronics & Kg is a BOARD CONNECTOR with 110 contacts in 5 rows, featuring NICKEL finish. It has a terminal pitch of 2mm and PRESS FIT termination, UL94V-0 rated for flammability. Ideal for board mounting applications requiring FEMALE contact gender and RIGHT ANGLE mounting style.
VHR-2N-R
BOARD CONNECTOR;
DF40C-80DP-0.4V(51)
DF40C-80DP-0.4V(51) by Hirose Electric is a 2-row, 80-contact board stacking connector with gold-plated phosphor bronze contacts. Featuring a mating contact pitch of 0.016", it offers high insulation resistance of 50M ohm and withstands up to 100VAC. Ideal for PCB applications requiring reliable signal transmission in commercial environments at temperatures ranging from -35°C to 85°C.
M80-5401042
M80-5401042 by Harwin PLC is a 10-contact board connector with 0.079" mating contact pitch, suitable for PCB mounting with a temperature range of -55 to 125°C. Featuring tin finish contacts and glass-filled polyphenylene sulfide insulator, it offers high durability with 500 cycles and UL94V-0 flammability rating. Ideal for commercial applications requiring reliable right-angle mounting in black color housing.
B6B-XH-A(LF)(SN)
B6B-XH-A(LF)(SN) by J S T Mfg is a 6-contact BOARD CONNECTOR with 0.098" pitch, 1000000000 ohm insulation resistance, and 3A signal current rating. It features POLYAMIDE66 insulator material, TIN OVER COPPER mating contact finish, and operates b/w -25 to 85 °C. Ideal for board-to-board connections in electronics applications.
66506-329LF
Amphenol Communications Solutions
Amphenol's 66506-329LF is a 26-contact board connector with 2 rows, UL94V-0 flammability rating, and 2.54mm terminal pitch. Ideal for applications requiring male solder contacts in straight mounting style on boards.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
35362-0450
Molex 35362-0450 is a board connector with 4 contacts, featuring 0.079" mating pitch and 0.406" body length. It uses matte tin finish, brass contact material, and polyamide insulator. Ideal for commercial applications requiring reliable rectangular PCB contact patterns.
35362-1250
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; PCB Contact Pattern: RECTANGULAR;
35362-0250
Molex 35362-0250 is a board connector with 2 contacts, featuring TIN COPPER finish. It has a mating contact pitch of 0.079" and body dimensions of 0.303" x 0.217" x 0.335". Ideal for commercial applications requiring reliable rectangular PCB contact patterns and solder termination.
35362-0350
Molex 35362-0350 is a board connector with 3 contacts, featuring a mating contact pitch of 0.079" and body dimensions of 0.382" x 0.217" x 0.335". It uses TIN over copper termination for reliability in commercial applications.
353630460
Molex 353630460 is a board connector with 0.079" contact pitch, 1000000000 ohm insulation resistance, and 500VAC dielectric voltage. Ideal for commercial applications, it features POLYAMIDE insulator material, matte tin finish, and operates b/w -40 to 105 °C.
35362-0550
35362-0550 by Molex is a 5-contact board connector with 0.079" pitch, 0.484" body length, and TIN finish. Ideal for commercial applications, it features a polyamide insulator, UL 94V-0 flammability rating, and solder termination.
35362-0650
The Molex 35362-0650 is a board connector with 6 contacts, featuring a mating contact pitch of 0.079" and body dimensions of 0.563" x 0.217" x 0.335". It uses matte tin finish on brass contacts, suitable for commercial applications requiring a reliable rectangular PCB contact pattern.
353630860
Molex 353630860 is a board connector with 8 contacts, featuring a mating contact pitch of 0.079", insulation resistance of 1Gohm, and dielectric voltage rating of 500VAC. Ideal for applications requiring a durable, right-angle mounting style with solder termination and male contact gender.
35362-0950
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; UL Flammability Code: 94V-0;
353631260
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 500VAC; No. of Connectors: ONE;
35362-0750
BOARD CONNECTOR; Body Depth: .335 inch; Mounting Style: STRAIGHT; Contact Material: BRASS; Mating Contact Pitch (inch): 0.079; Termination Contact Finish: MATTE TIN;
353630360
35362-1150
BOARD CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; No. of Rows Loaded: 1; Termination Type: SOLDER KINKED LEADS;
35362-0850
35362-0850 by Molex is a board connector with 8 contacts, 0.079" pitch, and 0.72" body length. It features matte tin finish, polyamide insulator, and solder termination. Ideal for commercial applications requiring a reliable rectangular contact pattern on PCBs with UL flammability rating of 94V-0.
353630560
Molex 353630560 is a board connector with 0.079" pitch, 1000000000 ohm insulation resistance, and 0.217" body width. Ideal for applications requiring a durable male connector with matte tin finish, POLYAMIDE insulator, and operating temperatures from -40 to 105 °C.
35362-1450
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Additional Features: SHERLOCK, POLARIZED, SHROUDED;
353630660
Molex 353630660 is a board connector with 6 contacts, 0.079" pitch, and matte tin finish. It has a temperature range of -40 to 105°C, suitable for commercial applications requiring durable right-angle mounting with solder termination. The UL-listed connector features polarization keying and polyamide insulation for reliable performance in various electronic devices.
353630260
The Molex 353630260 is a board connector with a mating contact pitch of 0.079 inches and insulation resistance of 1,000,000,000 ohms. It is commonly used in commercial applications due to its durability and right angle mounting style.
353630760
35362-1041
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Filter Feature: NO;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved