Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
The Molex 22-16-2070 is a board connector with 7 contacts, rated at 2.5A signal current. Featuring a mating contact pitch of 0.1", it has an insulation resistance of 500000000000 ohm and operates b/w -40 to 105 °C. Ideal for PCB edge locking hook mounting in commercial applications.
Median Price
$0.740
Lifecycle Status
Suppliers In-Stock
16
In-Stock Inventory
1k+
Heilind Electronics
1+ parts
$0.626
100+ parts
-
1k+ parts
$0.510
10k+ parts
$0.503
Adafruit Industries
$0.661
$0.628
Interstate Connecting
$0.668
$0.560
$0.544
Verical
$0.720
DigiKey
$1.380
$0.631
Mouser Electronics
$1.390
$0.952
$0.794
$0.718
Farnell
$0.817
Chip1Stop
$0.598
$0.546
Master Electronics
$0.796
$0.663
$0.571
Digiode
$0.589
Nova Conductors
$0.654
TestEquity
$0.670
Vyrian
VNN
IBS Electronics
$0.827
$0.799
$0.687
TME
$0.518
Semicontronic
$0.461
$0.449
$0.447
Corphita
$0.558
Continental Prestige Electronics
$0.618
$0.606
Argo Parts USA
$0.599
Netroflash
$0.621
$0.608
Advanced Electronics
Aztec Data Supply Inc.
$3.203
Andel Nordic
$56.880
$39.817
Perfect Parts
The close contact pitch allows for efficient signal transmission and connectivity.
The compact body size makes this connector suitable for applications with limited space.
High insulation resistance ensures minimal signal interference and reliable performance.
The slim body width makes this connector suitable for applications where space is a constraint.
The high dielectric strength ensures safe operation under varying voltage conditions.
The finish provides durability and corrosion resistance for long-lasting use.
The moderate body depth provides a balance between size and functionality.
Polyamide offers good mechanical strength and thermal properties for reliable insulation.
The edge locking hook design ensures secure mounting on the PCB for stable connectivity.
The high maximum operating temperature allows for use in a wide range of environmental conditions.
The low minimum operating temperature enables reliable performance even in cold environments.
Specifically designed for board-to-board connections, making it suitable for electronic applications.
Brass contact material ensures good conductivity and durability for long-term use.
UL 94V-0 rating indicates high flame retardancy for enhanced safety.
Capable of handling a high signal current, suitable for various electronic applications.
Compliance with industry standards ensures quality and safety in performance.
Sufficient number of contacts for multiple connections within the same connector.
Single connector design for simplified installation and operation.
Withstands multiple insertions and removals for long-lasting usage.
Designed for direct mounting on a PCB for easy integration.
Standard terminal pitch size for compatibility with various electronic devices.
Rectangular contact pattern for efficient signal transmission and connectivity.
Solder termination ensures a secure and stable connection for reliable performance.
Low withdrawal force for easy removal while maintaining secure contact.
Female contact gender for compatibility with male connectors in the system.
Low contact resistance for efficient signal transmission and minimal power loss.
Plug style design for easy and secure connections.
Right angle mounting style for flexibility in installation and space-saving.
Bellowed contact style provides flexibility and reliability in signal transmission.
High insertion force for secure and stable connection.
Optimal terminal length for efficient and reliable connections.
Rectangular contact pattern ensures efficient signal transmission and connectivity.
Suitable for commercial applications requiring reliable and consistent performance.
Headers & Edge Type Connectors 22-16-2070 attributes and parameters. Explore more Headers & Edge Type Connectors devices from Molex
Additional Features:
Board Mounting Option:
Body Width:
Body Depth:
Body Length:
Body or Shell Style:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Pattern:
Contact Resistance:
Contact Style:
DIN Conformance:
Dielectric Withstanding Voltage (V):
Durability:
Filter Feature:
IEC Conformity:
Maximum Insertion Force (N):
Insulation Resistance:
Insulator Material:
MIL Conformity:
Mating Contact Pitch (inch):
Mating Info.:
Mixed Contacts:
Mounting Style:
Mounting Type:
No. of Connectors:
No. of PCB Rows:
No. of Rows Loaded:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
PCB Contact Pattern:
Rated Current - Signal:
Reference Standard:
Reliability:
Sub-Category:
Terminal Length:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
UL Flammability Code:
Minimum Withdrawal Force (N):
22-16-2070 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.40
SB
PCN Obsolescence/ EOL - Resin Color 01/Jan/2002
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
LM358MX
Texas Instruments
LM358MX by Texas Instruments is a dual operational amplifier with a max input offset voltage of 9000 uV. It has a nominal voltage of 5V and a min voltage gain of 15000. This op amp is commonly used in applications requiring amplification and signal conditioning.
1554216002
Molex
WIRE AND CABLE;
2N2222A
Nte Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 1 W; Maximum Collector Current (IC): .8 A; Terminal Form: WIRE;
BAV99
General Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
SBAV99LT1G
Onsemi
SBAV99LT1G by Onsemi is a rectifier diode with a max repetitive peak reverse voltage of 100V. It has a small outline package style and a fast max reverse recovery time of 0.006 us. It is commonly used in applications requiring low power dissipation and high operating temperatures.
LM317T
Samsung
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Load Regulation (%): 1.5 %; Operating Temperature (TJ-Min): 0 Cel; Maximum Line Regulation (%/V): .07;
1N4148
Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Maximum Repetitive Peak Reverse Voltage: 100 V; Config: SINGLE; No. of Phases: 1; No. of Elements: 1;
1N4148WT
Formosa Microsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Itt Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
FDC5614P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.6 W; Transistor Application: SWITCHING; Maximum Drain Current (ID): 3 A;
350766-1
TE Connectivity
TE Connectivity 350766-1 is a rectangular power connector with 0.25" mating contact pitch, rated for 600V and operating temperatures from -55 to 105°C. It has a durable design with POLYAMIDE insulator material, suitable for commercial applications requiring secure crimp termination in cable mounting setups.
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
2N7002
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Package Body Material: PLASTIC/EPOXY; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Package Shape: RECTANGULAR;
SS14+
Multicomp Pro
SS14+ by Multicomp Pro is a Schottky rectifier diode with a max output current of 1A and a reverse test voltage of 40V. It is designed for surface mount applications in electronic circuits, offering a small outline package style and dual terminal position. With a temperature range from -65°C to 150°C, it is suitable for various industrial and consumer electronics.
OPA2277UA
OPA2277UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 100 uV and micropower consumption of 1.65 mA. Ideal for industrial applications, it offers high common mode rejection ratio of 140 dB and unity gain bandwidth of 1000 kHz in a small outline package.
M39029/58360
Esterline Technologies
CONNECTOR ACCESSORY; Terminal Type: CRIMP; Removal Tools: M81969/14-01; Associated Military - Specifications: MIL-DTL-38999; IEC Conformity: NO; MIL-Connector Accessory Name: CONTACT;
MBRS360T3G
MBRS360T3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.63V and a max output current of 3A. It is designed for applications requiring high-speed switching and low power loss, making it suitable for use in various electronic devices.
ERJU06F10R0V
Panasonic
ERJU06F10R0V by Panasonic is an 0805 size SMT fixed resistor with a resistance of 10 ohm and 1% tolerance. It operates b/w -55 to 155 °C, suitable for AEC-Q200 standards in automotive applications due to its high temperature coefficient of 100 ppm/°C. With a max operating voltage of 150 V and power dissipation of 0.125 W, it is ideal for surface mounting type.
DS18B20U+
Analog Devices
DS18B20U+ by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.
PAP-03V-S
J S T Mfg
PAP-03V-S by J S T Mfg is a 3-contact BOARD CONNECTOR with 94V-0 UL Flammability Code. It features FEMALE CRIMP termination and CABLE mounting, making it ideal for various applications requiring secure cable connections.
929665-04-36-EU
3m Electronic Products Division
3m Electronic Products Division's 929665-04-36-EU is a 72-contact, 2-row board connector with gold over nickel termination. It features copper alloy contacts, UL94V-0 flammability rating, and male gender. Ideal for straight mounting on boards, this connector has a terminal pitch of 2.54mm and is suitable for headers & edge type applications.
5-146280-2
TE Connectivity 5-146280-2 is a board connector with 0.1" pitch, suitable for commercial applications. Featuring matte tin over nickel finish, it has an insulation resistance of 5000000000 ohm and operates b/w -65 to 105°C. Ideal for use in electronics requiring a reliable male receptacle connection with solder termination.
22-01-2027
Molex 22-01-2027 is a board connector with 0.1" mating contact pitch, suitable for headers & edge type connectors. Featuring a body length of 0.222", insulation resistance of 1000000000 ohm, and operating temperature range from -40 to 105 °C, it offers reliable performance in various commercial applications requiring a durable and high-quality female contact design.
68612214122
Wuerth Elektronik & Kg
68612214122 by Wurth Elektronik is a FFC/FPC connector with 22 contacts, 0.039" pitch, and 1A signal current rating. Ideal for board mounting applications, it features polyphenylene sulfide insulation material and tin over nickel contact finish. Operating b/w -25°C to 85°C, it offers high durability with 25 cycles and meets UL standards for reliability.
M50-3600542
Harwin Plc
The Harwin PLC M50-3600542 is a 10-contact board connector with 0.05" mating contact pitch, suitable for PCB applications. Featuring a 1A signal current rating, it has a durable design with 300 cycles lifespan and operates b/w -40°C to 105°C temperature range. The connector has tin finish contacts and polyethylene insulation material, meeting UL standards for reliability.
74441-0010
Molex 74441-0010 is a board connector with 20 contacts, 0.031" mating pitch, and 0.433" body length. Ideal for commercial applications, it has a matte tin finish, operates b/w -40 to 85°C, and features a glass-filled polyethylene insulator.
B4B-ZR-SM4-TF(LF)(SN)
B4B-ZR-SM4-TF(LF)(SN) by J S T Mfg is a BOARD CONNECTOR with 4 contacts, BRASS material, and Tin (Sn) finish. It has a terminal pitch of 1.5mm and UL Flammability Code of 94V-0. Ideal for surface mount applications in headers & edge type connectors.
52610-3072
The Molex 52610-3072 FFC/FPC connector features a mating contact pitch of 0.039", insulation resistance of 100M ohm, and dielectric voltage rating of 700VAC. Ideal for board mounting applications, this female connector has a total of 30 contacts, staggered PCB pattern, and surface mount termination type.
TSW-104-07-T-S
Samtec
Samtec TSW-104-07-T-S is a 4-contact board connector with 0.1" pitch, suitable for commercial applications. It features phosphor bronze contacts with matte tin finish and operates b/w -55°C to 105°C. The connector has a black insulator made of polybutylene terephthalate, UL94V-0 rated, and uses solder termination.
DF40C-80DP-0.4V(51)
Hirose Electric
DF40C-80DP-0.4V(51) by Hirose Electric is a 2-row, 80-contact board stacking connector with gold-plated phosphor bronze contacts. Featuring a mating contact pitch of 0.016", it offers high insulation resistance of 50M ohm and withstands up to 100VAC. Ideal for PCB applications requiring reliable signal transmission in commercial environments at temperatures ranging from -35°C to 85°C.
5011
Aries Electronics
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; MIL Conformity: NO; Additional Features: POLARIZATION AVAILABLE, MAX CONTACTS (SERIES)=10, MAX ROWS (SERIES)=2; Termination Type: SURFACE MOUNT;
22-29-2061
The Molex 22-29-2061 is a board connector with 6 contacts, featuring a mating contact pitch of 0.1", insulation resistance of 1000000000 ohm, and rated current of 4A. It has a body length of 0.6", body width of 0.23", and operates b/w temperatures of 0 to 75°C. This connector is ideal for applications requiring reliable signal transmission on PCBs in commercial settings.
B2PS-VH-GU
B2PS-VH-GU by J S T Mfg is a BOARD CONNECTOR with 2 contacts, BRASS material, and Tin (Sn) finish. It has a terminal pitch of 3.96mm and is ideal for right angle mounting on boards. This connector is suitable for applications requiring male contact gender and UL 94V-0 flammability rating.
51021-1100
The Molex 51021-1100 is a board connector with 11 contacts, 0.049" pitch, and 0.61" body length. It has an insulation resistance of 100M ohm, operates b/w -40 to 85°C, and uses crimp termination. Ideal for commercial applications requiring reliable female connectors with locking mounting option.
51110-0450
Molex 51110-0450 is a 2-row board connector with 0.079" contact pitch, suitable for commercial applications. Featuring polyester insulation, it has 4 contacts with 40mohm resistance and operates b/w -40 to 105°C. Ideal for cable mounting, it offers a polarization key and UL94V-0 flammability rating.
2-640456-6
TE Connectivity 2-640456-6 is a board connector with 26 contacts, 0.1" pitch, and TIN finish. It has a temperature range of -55 to 105°C and UL94V-0 flammability rating. Ideal for commercial applications requiring a reliable male plug with solder termination on a straight mounting style board connector.
GHR-04V-S
GHR-04V-S by J S T Mfg is a 4-contact BOARD CONNECTOR with 0.049" pitch, POLYBUTYLENE TEREPHTHALATE insulator, and 500VAC dielectric voltage. Ideal for CABLE mounting applications, it has a rated current of 1A and operates b/w -25 to 85°C.
51021-0300
The Molex 51021-0300 is a board connector with 3 contacts, 0.049" pitch, and insulation resistance of 100M ohm. It has a temperature range of -40 to 85°C, ideal for commercial applications requiring reliable female crimp connectors in cable assemblies with locking mounting option.
09-50-3041
Molex 09-50-3041 is a board connector with 0.156" mating pitch, 0.62"x.25"x.625" body dimensions, and POLYAMIDE insulator material. It has 4 contacts, FEMALE gender, PLUG shell style, and CRIMP termination type for CABLE mounting applications in commercial settings.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
22-16-2060
The Molex 22-16-2060 board connector features a mating contact pitch of 0.1", insulation resistance of 500000000000 ohm, and dielectric voltage rating of 250VAC. Ideal for PCB edge locking hook mounting, this female plug connector has a durability of 25 cycles and is rated for a max operating temperature of 105°C.
22-16-2080
The Molex 22-16-2080 is a board connector with 8 contacts, rated at 2.5A signal current. It features a mating contact pitch of 0.1", insulation resistance of 500000000000 ohm, and operates b/w -40 to 105 °C. Ideal for PCB edge locking hook mounting in commercial applications requiring durable female connectors with solder termination.
22-16-2050
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 250VAC; No. of Connectors: ONE;
22-16-2040
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; No. of PCB Rows: 1;
22-16-2030
The Molex 22-16-2030 is a board connector with 3 contacts, 0.1" pitch, and 500000000000 ohm insulation resistance. Ideal for PCB edge locking hook mounting in applications requiring a durable, right-angle plug with female contact gender and solder termination. Operating temperatures range from -40 to 105 °C, meeting UL and CSA standards for commercial reliability.
22-16-2061
22-16-2020
2216
Singatron Enterprise
BOARD CONNECTOR; Manufacturer Series: 2216; DIN Conformance: NO; MIL Conformity: NO; IEC Conformity: NO;
22-16-2090
22-16-2041
22-16-2230
22-16-2231
Molex 22-16-2231 is a board connector with 23 contacts, 0.1" pitch, and 2.5A signal current rating. Ideal for PCB edge locking hook mounting in commercial applications with -40 to 105°C operating range. Features include POLYAMIDE insulation, UL94V-0 flammability, and bellowed female contacts for reliability.
2-216791-6
TE Connectivity 2-216791-6 is a dual-row board connector with 26 contacts, 0.1" pitch, and polyethylene insulator. It has a tin finish, operates b/w -65 to 105°C, and offers high insulation resistance of 5Gohm. Ideal for commercial applications requiring reliable signal connections on PCBs.
22-16-2236
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mixed Contacts: NO; Filter Feature: NO; Terminal Pitch (mm): 2.54;
22-16-2071
The Molex 22-16-2071 is a board connector with 7 contacts, 0.1" pitch, and 0.696" body length. It features POLYAMIDE insulation material, UL94V-0 flammability rating, and operates b/w -40 to 105°C. Ideal for PCB edge locking hook mounting in commercial applications requiring a durable female plug with bellowed contact style.
22-16-2140
22-16-2091
22-16-2180
22-16-2021
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; Durability: 25 Cycles;
22-16-2081
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved