Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Molex 22-16-2020 board connector features 0.1" pitch, 500000000000 ohm insulation resistance, and 250VAC dielectric voltage. Ideal for PCB edge locking hook mounting with POLYAMIDE insulator material. Operating temp range -40 to 105 °C, UL94V-0 rated, suitable for commercial applications requiring durable female connectors.
Median Price
$0.355
Lifecycle Status
Suppliers In-Stock
16
In-Stock Inventory
1k+
Arrow
1+ parts
$0.490
100+ parts
-
1k+ parts
10k+ parts
$0.294
Mouser Electronics
$0.720
$0.520
$0.416
$0.359
DigiKey
$0.810
$0.371
Chip1Stop
$0.250
$0.209
Verical
$0.340
Master Electronics
$0.310
$0.297
Farnell
$0.370
Powell Electronics
$0.281
Nova Conductors
$0.373
Digiode
$0.466
Vyrian
IBS Electronics
$0.385
$0.378
TME
$0.412
PC Components Company LLC
Bristol Electronics
VNN
Semicontronic
$0.212
$0.207
$0.206
Continental Prestige Electronics
$0.367
$0.360
Argo Parts USA
$0.356
Netroflash
$0.354
$0.347
Corphita
$0.441
Aztec Data Supply Inc.
$3.700
Andel Nordic
$51.930
$36.353
Assy Fe
Perfect Parts
Close contact pitch allows for high-density connections, making it suitable for applications where space is limited.
High insulation resistance ensures minimal leakage current, leading to reliable and stable connections.
Can withstand high voltages, ensuring safety and reliability in electrical connections.
UL 94V-0 rating indicates that the connector is flame-retardant, enhancing safety in case of fire.
Capable of handling higher current signals, making it suitable for various signal transmission applications.
Withstands multiple mating cycles, ensuring long-lasting performance and reliability.
Right-angle mounting style allows for easy and space-efficient PCB installation in tight spaces.
Bellowed contacts provide a reliable connection and prevent signal interference or loss.
Headers & Edge Type Connectors 22-16-2020 attributes and parameters. Explore more Headers & Edge Type Connectors devices from Molex
Additional Features:
Board Mounting Option:
Body Width:
Body Depth:
Body Length:
Body or Shell Style:
Connector Type:
Mating Contact Finish:
Contact Gender:
Contact Material:
Contact Pattern:
Contact Resistance:
Contact Style:
DIN Conformance:
Dielectric Withstanding Voltage (V):
Durability:
Filter Feature:
IEC Conformity:
Maximum Insertion Force (N):
Insulation Resistance:
Insulator Material:
MIL Conformity:
Mating Contact Pitch (inch):
Mating Info.:
Mixed Contacts:
Mounting Style:
Mounting Type:
No. of Connectors:
No. of PCB Rows:
No. of Rows Loaded:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
PCB Contact Pattern:
Rated Current - Signal:
Reference Standard:
Reliability:
Sub-Category:
Terminal Length:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
UL Flammability Code:
Minimum Withdrawal Force (N):
22-16-2020 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.40
SB
PCN Obsolescence/ EOL - Resin Color 01/Jan/2002
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
B340A-13-F
SPC TECHNOLOGY/ MULTICOMP
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM7805CT
Silicon Group
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Package Body Material: PLASTIC/EPOXY; Maximum Load Regulation: .05 %;
LM358MX
Texas Instruments
LM358MX by Texas Instruments is a dual operational amplifier with a max input offset voltage of 9000 uV. It has a nominal voltage of 5V and a min voltage gain of 15000. This op amp is commonly used in applications requiring amplification and signal conditioning.
1N4148
Transys Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM317T
Inchange Semiconductor
Other Regulators; No. of Terminals: 3; Surface Mount: NO; Technology: BIPOLAR; Minimum Output Voltage-1: 1.2 V; No. of Outputs: 1;
2N2222A
STMicroelectronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .6 A;
LL4148
Bkc Semiconductors
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
BAV99
North American Philips Discrete Products Div
RECTIFIER DIODE; Surface Mount: YES; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Repetitive Peak Reverse Voltage: 70 V; Maximum Reverse Recovery Time: .006 us; Maximum Output Current: .1 A;
LM107H
General Electric Solid State
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Minimum Voltage Gain: 25000;
AT90CAN128-16AU
Atmel
MICROCONTROLLER, RISC; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 64; Package Code: TQFP; Package Shape: SQUARE;
1N4148WT
Surge Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Jiangsu Changjiang Electronics Technology
RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): .715 V; Maximum Operating Temperature: 150 Cel; Maximum Reverse Recovery Time: .006 us; Maximum Output Current: .2 A;
DS18B20U
Dallas Semiconductor
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Minimum Operating Temperature: -55 Cel; Package Equivalence Code: TSSOP8,.19;
2N7002
Central Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Drain Current (ID): .115 A; Maximum Drain Current (Abs) (ID): .115 A;
USB3320C-EZK-TR
Microchip Technology
Microchip Technology's USB3320C-EZK-TR is a Bus Controller IC with 32 terminals, operating at 1.6-2V. It supports USB bus compatibility, clock frequency up to 60MHz, and CMOS technology. Ideal for applications requiring Universal Serial Bus peripherals in compact designs with low power consumption.
STM32H753IIT6
STM32H753IIT6 by STMicroelectronics is a 32-bit microcontroller with 176 terminals, operating at up to 48 MHz. It features 20-Ch 16-Bit ADCs and 2-Ch 12-Bit DACs, suitable for industrial applications requiring high-speed data processing and connectivity via CAN, ETHERNET, USB, and more.
LL4148-GS08
Vishay Intertechnology
The Vishay Intertechnology LL4148-GS08 is a glass diode with fast recovery time of 0.008 us and max reverse current of 5 uA. Ideal for applications requiring rectification, it has a breakdown voltage of 100 V and can handle a peak forward current of 2 A.
SMMBT2222ALT1G
Onsemi
SMMBT2222ALT1G by Onsemi is a NPN BJT transistor with 3 terminals, 0.6A IC, and 40V VCE. It has a hFE of 75, fT of 300MHz, and operates up to 150°C. Ideal for small signal applications in automotive electronics due to AEC-Q101 compliance.
SMBJ18CA
Diodes Incorporated
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
CRG0805F10R
TE Connectivity
TE Connectivity's CRG0805F10R is a 10 ohm fixed resistor with 1% tolerance and 0.125 W power dissipation. It features thick film technology, SMT package style, and matte tin over nickel terminal finish. Ideal for surface mount applications in electronics, offering a temperature coefficient of 200 ppm/°C and operating voltage of 150 V.
87832-5622
Molex
Molex 87832-5622 is a 14-contact board connector with 0.079" pitch, suitable for headers & edge type connectors. Features include 1400VAC dielectric voltage, -55 to 105°C operating temp range, and matte tin over nickel finish. Ideal for commercial applications requiring durable male connectors with surface mount termination.
GHR-08V-S
J S T Mfg
GHR-08V-S by J S T Mfg is an 8-contact BOARD CONNECTOR with 94V-0 UL Flammability Code. It features FEMALE contacts for CABLE mounting and CRIMP termination. Ideal for applications requiring secure and reliable connections in electronic devices.
1410187-3
TE Connectivity's 1410187-3 header connector features a mating contact pitch of 0.07", insulation resistance of 1Gohm, and operates b/w -55 to 105°C. With a total of 112 contacts in a polarized design, it is ideal for board-to-board connections in commercial applications requiring durability and reliability.
PHR-6-Y
PHR-6-Y by J S T Mfg is a 6-contact BOARD CONNECTOR with 0.079" pitch, 2A signal current rating, and POLYAMIDE66 insulator. It has a dielectric voltage of 800VAC, operates b/w -25 to 85°C, and features FEMALE SQ PIN-SKT contacts for CABLE mounting applications.
1025
Keystone Electronics
PCB CONNECTOR; Option: GENERAL PURPOSE; Mating Contact Finish: NOT SPECIFIED; MIL Conformity: NO; Contact Material: NOT SPECIFIED; IEC Conformity: NO;
851-43-030-30-001000
Mill-max Mfg
The Mill-max Mfg 851-43-030-30-001000 is a BOARD CONNECTOR with 30 contacts, TIN finish. It has a terminal pitch of 1.27mm and is designed for SURFACE MOUNT applications. The connector features FEMALE contact gender and SOCKET body style, suitable for STRAIGHT mounting on boards.
1473005-4
TE Connectivity 1473005-4 is a card edge connector with 200 contacts, 0.024" pitch, and polyethylene insulation. It operates b/w -55°C to 85°C, suitable for PCB mounting applications requiring high durability and reliability in commercial settings.
102694-3
TE Connectivity 102694-3 is a 2-row board connector with 10 contacts, rated at 3A for signal current. Featuring tin/lead termination, it has a mating contact pitch of 0.1" and operates b/w -65 to +105°C. Ideal for cable mounting applications requiring reliable female connectors with bellowed contact style.
503480-0600
The Molex 503480-0600 is a FFC/FPC connector with a mating contact pitch of 0.020 inch and insulation resistance of 50M ohm. It is commonly used in board mounting applications, has a max operating temperature of 85°C, and offers a durability of 10 cycles.
B2B-PH-SM4-TB(LF)(SN)(P)
B2B-PH-SM4-TB(LF)(SN)(P) by J S T Mfg is a BOARD CONNECTOR with COPPER ALLOY contacts and TIN finish. Featuring 2 contacts, it has a terminal pitch of 2mm and UL 94V-0 flammability rating. Ideal for surface mount applications in headers & edge type connectors.
22-05-7025
The Molex 22-05-7025 is a board connector with 0.098" mating contact pitch, suitable for headers & edge type connectors. Featuring a 1400VAC dielectric voltage, it has a temperature range of -40 to 105°C and offers high durability with 30 cycles. Ideal for commercial applications requiring reliable signal transmission at 3A current rating.
SM06B-GHS-TB(LF)(SN)
SM06B-GHS-TB(LF)(SN) by J S T Mfg is a 10.75" header connector with 0.049" pitch, suitable for board mounting applications. Featuring TIN finish, POLYAMIDE insulator, and PHOSPHOR BRONZE contacts, it offers 500VAC voltage withstand and operates b/w -25 to 85 °C. Ideal for signal currents up to 1A, this UL-rated connector has a polarized housing and right-angle mounting option.
102387-1
TE Connectivity's 102387-1 is a board connector with 10 contacts, rated at 3A signal current. It features a mating contact pitch of 0.1", insulation resistance of 5G ohm, and operates in temperatures ranging from -65 to 105°C. Ideal for commercial applications requiring reliable female connectors with crimp termination.
B8B-PH-K-S(LF)(SN)
B8B-PH-K-S(LF)(SN) by J S T Mfg is a BOARD CONNECTOR with 0.079" pitch, 2A signal current rating, and 800VAC dielectric voltage. Ideal for applications requiring a male contact gender, RECTANGULAR PCB pattern, and POLYAMIDE66 insulator material.
2-640456-3
TE Connectivity 2-640456-3 is a 23-contact board connector with 0.1" pitch, suitable for commercial applications. Featuring tin finish, it operates b/w -55 to 105°C and has UL94V-0 flammability rating. Ideal for PCBs, this male plug connector has a rectangular contact pattern and solder termination.
50-57-9003
The Molex 50-57-9003 is a board connector with a mating contact pitch of 0.1 inch. It has a body width of 0.099 inch and depth of 0.6 inch, making it suitable for various applications in headers & edge type connectors. Its insulator material is glass filled polyester, and it has a total of 3 contacts with female SQ PIN-SKT contact style.
801-47-053-10-002000
BOARD CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED;
1065
PCB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; No. of Connectors: ONE; Body Width: .3 inch; Contact Pattern: RECTANGULAR;
B6B-ZR(LF)(SN)
B6B-ZR(LF)(SN) by J S T Mfg is a 6-contact BOARD CONNECTOR with 0.059" pitch, GLASS FILLED POLYAMIDE66 insulator, and 500VAC dielectric voltage. It operates b/w -25 to 85 °C, suitable for applications requiring high insulation resistance and UL94V-0 flammability rating.
61300611821
Wuerth Elektronik & Kg
61300611821 by Wurth Elektronik is a BOARD CONNECTOR with 6 contacts, rated at 3A. It features GOLD contact finish, POLYBUTYLENE TEREPHTHALATE insulator material, and operates b/w -40 to 125 °C. Ideal for commercial applications requiring a reliable connection on PCBs with a mating contact pitch of 0.1 inch.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
22-16-2060
The Molex 22-16-2060 board connector features a mating contact pitch of 0.1", insulation resistance of 500000000000 ohm, and dielectric voltage rating of 250VAC. Ideal for PCB edge locking hook mounting, this female plug connector has a durability of 25 cycles and is rated for a max operating temperature of 105°C.
22-16-2070
The Molex 22-16-2070 is a board connector with 7 contacts, rated at 2.5A signal current. Featuring a mating contact pitch of 0.1", it has an insulation resistance of 500000000000 ohm and operates b/w -40 to 105 °C. Ideal for PCB edge locking hook mounting in commercial applications.
22-16-2080
The Molex 22-16-2080 is a board connector with 8 contacts, rated at 2.5A signal current. It features a mating contact pitch of 0.1", insulation resistance of 500000000000 ohm, and operates b/w -40 to 105 °C. Ideal for PCB edge locking hook mounting in commercial applications requiring durable female connectors with solder termination.
22-16-2050
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 250VAC; No. of Connectors: ONE;
22-16-2040
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; No. of PCB Rows: 1;
22-16-2030
The Molex 22-16-2030 is a board connector with 3 contacts, 0.1" pitch, and 500000000000 ohm insulation resistance. Ideal for PCB edge locking hook mounting in applications requiring a durable, right-angle plug with female contact gender and solder termination. Operating temperatures range from -40 to 105 °C, meeting UL and CSA standards for commercial reliability.
22-16-2061
2216
Singatron Enterprise
BOARD CONNECTOR; Manufacturer Series: 2216; DIN Conformance: NO; MIL Conformity: NO; IEC Conformity: NO;
22-16-2090
22-16-2041
22-16-2230
22-16-2231
Molex 22-16-2231 is a board connector with 23 contacts, 0.1" pitch, and 2.5A signal current rating. Ideal for PCB edge locking hook mounting in commercial applications with -40 to 105°C operating range. Features include POLYAMIDE insulation, UL94V-0 flammability, and bellowed female contacts for reliability.
2-216791-6
TE Connectivity 2-216791-6 is a dual-row board connector with 26 contacts, 0.1" pitch, and polyethylene insulator. It has a tin finish, operates b/w -65 to 105°C, and offers high insulation resistance of 5Gohm. Ideal for commercial applications requiring reliable signal connections on PCBs.
22-16-2236
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mixed Contacts: NO; Filter Feature: NO; Terminal Pitch (mm): 2.54;
22-16-2071
The Molex 22-16-2071 is a board connector with 7 contacts, 0.1" pitch, and 0.696" body length. It features POLYAMIDE insulation material, UL94V-0 flammability rating, and operates b/w -40 to 105°C. Ideal for PCB edge locking hook mounting in commercial applications requiring a durable female plug with bellowed contact style.
22-16-2140
22-16-2091
22-16-2180
22-16-2031
22-16-2081
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved