Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
The Molex 67068-1000 USB connector features a body length of 0.472", insulation resistance of 1G ohm, and dielectric voltage rating of 750VAC. Ideal for telecom/datacom applications, it offers a durable design with solderable retention clips and gold shell finish for reliable signal transmission.
Median Price
-
Lifecycle Status
Suppliers In-Stock
12
In-Stock Inventory
1k+
VNN
1+ parts
100+ parts
1k+ parts
10k+ parts
Vyrian
Legend Electronics Inc.
Digiode
Semi Source
Nova Conductors
Bristol Electronics
Atlantic Semiconductor
Prism Electronics
J2 Sourcing AB
Lantek
Speed Components Ltd
Aztec Data Supply Inc.
$5.376
AZTECH Wire
$8.740
Continental Prestige Electronics
Corphita
Argo Parts USA
Bastille Electronics
Compact size allows for easy installation in tight spaces.
High insulation resistance ensures reliable performance and prevents electrical leakage.
Withstands high voltage levels, ensuring safe operation in various electrical environments.
Polyester insulator material provides durability and excellent electrical insulation properties.
Sufficient number of contacts for connecting multiple devices and ensuring efficient data transmission.
Low contact resistance minimizes signal loss and ensures reliable data transmission.
Telecom & Datacom Connectors 67068-1000 attributes and parameters. Explore more Telecom & Datacom Connectors devices from Molex
Additional Features:
Board Mounting Option:
Body Width:
Body Depth:
Body Length:
Body or Shell Style:
Connector Type:
Mating Contact Finish:
Contact Gender:
Contact Material:
Contact Resistance:
Contact Style:
DIN Conformance:
Dielectric Withstanding Voltage (V):
Durability:
Empty Shell:
Filter Feature:
IEC Conformity:
Maximum Insertion Force (N):
Insulation Resistance:
Insulator Material:
MIL Conformity:
Mating Info.:
Mixed Contacts:
Mounting Option-1:
Mounting Option-2:
Mounting Style:
Mounting Type:
No. of Connectors:
No. of PCB Rows:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
PCB Contact Pattern:
PCB Contact Row Spacing (mm):
Plating Thickness (inch):
Polarization Key:
Rated Current - Signal:
Reference Standard:
Reliability:
Shell Finish:
Shell Material:
Sub-Category:
Terminal Length:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
UL Flammability Code:
Minimum Withdrawal Force (N):
67068-1000 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
L7805CV
Sgs-ates Componenti Electronici S P A
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Terminal Finish: Tin/Lead (Sn/Pb); Nominal Output Voltage-1: 5 V;
LP2950CDT-3.3G
Onsemi
LP2950CDT-3.3G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.1A. It has a small outline package style, operates at temperatures ranging from -40 to 125 °C, and is suitable for applications requiring low dropout voltage and precise voltage regulation in electronic circuits.
DS18B20Z+T&R
Analog Devices
DS18B20Z+T&R by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. The sensor comes in a plastic package suitable for surface mount applications, with a max supply voltage of 5.5V and min of 3V.
LL4148
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
1N4148
Itt Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM317T
Fairchild Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Output Current-1: 1.5 A; No. of Outputs: 1; Qualification Status: Not Qualified;
2N2222A
NXP Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Maximum Operating Temperature: 150 Cel;
MMBT2907ALT1G
Rochester Electronics
PNP; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 200 MHz; Maximum Collector Current (IC): .6 A; Terminal Form: GULL WING;
LM555CMX
Texas Instruments
LM555CMX by Texas Instruments is an Analog Waveform Generation IC with 8 terminals. It operates at a nominal voltage of 5V and supports power supplies ranging from 5V to 15V. This versatile IC, housed in a small outline package, is commonly used for pulse and rectangular waveform generation in commercial temperature environments.
Daco Semiconductor
LM317T/NOPB
LM317T/NOPB by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max input-output voltage differential of 40V. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. The package style is flange mount with three terminals for easy installation.
FDV304P
The Onsemi FDV304P is a P-CHANNEL FET with 25V DS Breakdown Voltage, ideal for SWITCHING applications. It features a max Drain Current of 0.46A and an Operating Temperature range of -55 to 150 °C. The transistor comes in a PLASTIC/EPOXY package with GULL WING terminals, suitable for surface mount configurations.
M24308/2-1F
Cinch Connectivity Solutions
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1750VAC; No. of Connectors: ONE; Body Depth: .375 inch;
Adi Electronics
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; MIL Conformity: YES; Filter Feature: NO; Mating Info.: MULTIPLE MATING PARTS AVAILABLE;
MBRS130LT3G
MBRS130LT3G by Onsemi is a Schottky rectifier diode with a max output current of 1A and forward voltage of 0.445V. It operates b/w -65 to 125°C, has a reverse test voltage of 30V, and is ideal for power applications due to its small outline package style.
CRCW06030000Z0EAHP
Vishay Intertechnology
Vishay Intertechnology's CRCW06030000Z0EAHP is a 0 ohm jumper resistor with METAL GLAZE/THICK FILM tech. Operating temp range -55 to 155 °C, it's SMT package style makes it ideal for automotive applications meeting AEC-Q200 standard.
1N4148WS
Synsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
EU2B-YS3203C
Idec
ROTARY SWITCH;
LM358N
Silicon Group
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
Rugao Dachang Electronic
1304
Hirose Electric
TELECOM AND DATACOM CONNECTOR; Contact Gender: MALE; Mating Contact Finish: NOT SPECIFIED; IEC Conformity: NO; Empty Shell: NO; Insulator Material: ACRYLONITRILE BUTADIENE STYRENE;
6-2301994-2
TE Connectivity
TE Connectivity 6-2301994-2 is a EMI shielded connector with 0.537" body depth and liquid crystal polymer insulator. It has 8 contacts, solder termination, and operates b/w -40 to 85°C. Ideal for telecom & datacom applications requiring board mounting with nickel finish shell.
FCN-361J008-AU
Fujitsu
FCN-361J008-AU by Fujitsu is a Telecom & Datacom Connector with 8 contacts, rated at 3A signal current. It features gold-silver contact finish, copper alloy material, and polyester insulation for high reliability in commercial applications. With a mating contact pitch of 0.1 inch, this connector is suitable for telecom and datacom systems operating b/w -55°C to 85°C.
2129320-3
TE Connectivity's 2129320-3 is a Telecom & Datacom Connector with POLYETHYLENE insulator, MATTE TIN finish, and STAINLESS STEEL shell. It has 20 contacts, rated for 115/230VAC mains connection, and features RIGHT ANGLE mounting style. Ideal for telecom and datacom applications requiring FEMALE contact gender and SOLDER termination.
61400413321
Wuerth Elektronik & Kg
61400413321 by Wurth Elektronik is a USB connector with gold-plated contacts, suitable for telecom & datacom applications. Featuring a dielectric voltage of 750VAC, it has an operating temperature range from -40 to 105°C. With a durable design rated for 1500 cycles, this connector offers reliable performance in commercial settings.
09451511560
Harting Electronics & Kg
TELECOM AND DATACOM CONNECTOR; JESD-609 Code: e4; Termination Contact Finish: GOLD OVER NICKEL; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED;
2012670005
Molex
Molex 2012670005 USB connector features POLYETHYLENE insulator, 24 contacts, and 105°C max operating temp. Ideal for telecom/datacom applications with BOARD MOUNTING FLANGE option and FEMALE contact gender. Designed for durability with STAINLESS STEEL shell material and rated at 5A signal current.
USB-AM-S-F-B-TH-R
Samtec
Samtec's USB-AM-S-F-B-TH-R is a 4-contact USB connector with Tin-Nickel finish, PBT insulator, and steel shell. Ideal for board mounting in telecom/datacom applications due to its right-angle male contact design and UL 94V-0 flammability rating.
1-1747981-6
TE Connectivity 1-1747981-6 is a PREASSEM CONN telecom/datacom connector with 19 contacts, rated at 0.5A. It operates b/w -25 to 70°C, has TIN finish, and can endure 10000 cycles. Ideal for surface mount board applications due to its right angle receptacle design.
95501-6669
The Molex 95501-6669 is a telecom and datacom connector with a body length of 0.52", width of 0.453", and depth of 0.809". It has an insulation resistance of 500MΩ, termination contact finish of TIN, and is made with glass-filled liquid crystal polymer. This connector is commonly used in telecommunications and data communication applications.
RJHSE-3080
Amphenol Communications Solutions
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body or Shell Style: JACK; UL Flammability Code: 94V-0; Mounting Type: BOARD AND PANEL;
SS-6466-NF
Bel Fuse
Bel Fuse SS-6466-NF is a Telecom & Datacom Connector with 6 GOLD contacts, POLYETHYLENE insulator, and NICKEL/TIN shell finish. Ideal for board mounting applications in telecom and datacom systems due to its FEMALE contact gender, RIGHT ANGLE mounting style, and COPPER ALLOY shell material.
2049261103
USB CONNECTOR; Termination Contact Finish: NOT APPLICABLE; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED;
87520-0010BLF
The Amphenol Communications Solutions 87520-0010BLF is a USB connector with 4 contacts, rated at 1.5A signal current. It features a dielectric voltage of 750VAC and insulation resistance of 1Gohm, suitable for telecom applications. With a durable design lasting up to 1500 cycles, it offers reliable performance in temperatures ranging from -40°C to 85°C.
241006
Lumberg Connect
The Lumberg Connect 241006 USB connector has a body length of 0.516" and insulation resistance of 1 Gohm. With a shell material of steel, it is designed for telecom & datacom applications. Featuring a right angle mounting style and surface mount termination type, this connector offers durability with 1500 cycles.
446610002
Molex 446610002 is a Telecom & Datacom Connector with GLASS FILLED POLYAMIDE insulator. Featuring 8 contacts, it uses SNAP FIT termination on BOARD AND PANEL mount. Ideal for telecom and datacom applications due to its FEMALE contact gender and JACK body style with UL 94V-0 flammability rating.
J0G-0001NL
Pulse Electronics
J0G-0001NL by Pulse Electronics is a Telecom & Datacom Connector with 0.7" body length, 0.445" width, and 0.95" depth. Featuring 8 contacts, POLYETHYLENE insulator, and Tin (Sn) termination finish for board mounting. Ideal for telecom and datacom applications requiring a polarized housing and right angle mounting style.
5555167-1
TE Connectivity 5555167-1 is a Telecom & Datacom Connector with 0.608" body length, 0.5" width, and PBT-POLYESTER insulator. It has 8 contacts, rated at 1.5A signal current, suitable for board mounting applications in telecom and datacom equipment.
2171820001
TELECOM AND DATACOM CONNECTOR;
USB-RS232-WE-1800-BT_3.3
FTDI
USB-RS232-WE-1800-BT_3.3 by FTDI is a USB connector with 4 contacts, male gender, and plug body style. It features a filter, cable assembly option, and is suitable for Telecom & Datacom applications.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
67068-8000
The Molex 67068-8000 USB connector features gold termination, glass-filled polyamide insulator, and phosphor bronze contact material. With a dielectric voltage of 750VAC, it is ideal for telecom & datacom applications. This right-angle receptacle has a durability of 1500 cycles and operates b/w 0 to 50°C.
67068-7041
USB CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 750VAC; No. of Connectors: ONE;
67068-8001
Molex 67068-8001 USB connector features gold termination, glass-filled polyamide insulator, and phosphor bronze contact material. Ideal for telecom/datacom applications with 1000000000 ohm insulation resistance, 750VAC dielectric voltage, and 1500 cycle durability. Operating temperature range from 0 to 50 °C.
67068-9000
Molex 67068-9000 USB connector with 4 contacts, rated at 1.5A signal current, features glass-filled polyester insulation and solderable retention clips for board mounting. With a dielectric voltage of 750VAC, it is ideal for telecom & datacom applications requiring durable connectors with right-angle mounting style and polarized housing key.
67068-8010
67068-8011
Molex 67068-8011 USB connector with 4 contacts, rated at 1.5A signal current, features GLASS FILLED POLYAMIDE insulator material and COPPER ALLOY shell for durability. Suitable for telecom/datacom applications, it offers a dielectric voltage of 750VAC and operates b/w -50°C to 0°C temperature range.
67068-9001
The Molex 67068-9001 USB connector features gold contact finish, glass-filled polyester insulator, and 750VAC dielectric voltage. Ideal for telecom & datacom applications, with board mounting option and solder termination type. Operating temperature range from 0 to 50°C, UL flammability rating of 94V-0, and durability of 1500 cycles.
67068-0001
67068-0000
The Molex 67068-0000 USB connector features a body length of 0.472", insulation resistance of 1G ohm, and dielectric voltage rating of 750VAC. Ideal for telecom/datacom applications, it offers a durable design with solderable retention clips for board mounting in commercial settings.
67068-9011
USB CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 750VAC; No. of Connectors: ONE; Maximum Operating Temperature (Cel): 50;
67068-1001
67068-0011
67068-1010
67068-1011
67068-1110
67068-1111
67068-0100
67068-0101
67068-1100
67068-1101
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved