Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
COMBINATION LINE CONNECTOR;
Median Price
$17.000
Lifecycle Status
Suppliers In-Stock
13
In-Stock Inventory
1k+
Farnell
1+ parts
$15.190
100+ parts
$11.840
1k+ parts
$11.080
10k+ parts
-
Chip1Stop
$11.900
TTI
$17.920
$12.020
$11.310
Mouser Electronics
$18.100
$12.140
$11.330
DigiKey
$18.450
$13.370
$11.856
Newark
$20.970
$16.370
TTI Europe
$14.001
$13.728
Verical
Heilind Electronics
$13.810
Interstate Connecting
Vyrian
Digiode
$14.222
IBS Electronics
$12.238
Corphita
$13.473
Authorized Procurement Solutions
Combination Line Connectors 560155-1402 attributes and parameters. Explore more Combination Line Connectors devices from Molex
Connector Type:
560155-1402 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
2N2222A
Vishay Sprague
NPN; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JEDEC-95 Code: TO-18; Maximum Collector-Emitter Voltage: 40 V;
PIC18F4550-I/PT
Microchip Technology
PIC18F4550-I/PT by Microchip: 8-bit microcontroller with 44 terminals, 48 MHz clock frequency, and USB connectivity. Ideal for industrial applications requiring low power mode and 10-bit ADC channels.
LL4148
Diodes Incorporated
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
1N4148
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Surge Components
SMBJ18CA
Pro-an Electronic
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Polarity: BIDIRECTIONAL; Nominal Breakdown Voltage: 21.05 V; Maximum Repetitive Peak Reverse Voltage: 18 V;
LM555CN
National Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
Hy Electronic
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM317D2TG
Onsemi
LM317D2TG by Onsemi is an adjustable positive single output standard regulator with a max output current of 1.5A and a max output voltage of 37V. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
Tak Cheong Electronics Holdings
NE555/D
General Electric Solid State
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; Maximum Operating Temperature: 70 Cel; Technology: BIPOLAR; Package Equivalence Code: DIE OR CHIP; Qualification: Not Qualified;
C1206C104K5RACTU
KEMET Corporation
KEMET C1206C104K5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications due to its rectangular package shape and wraparound terminals.
New England Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
SS14
Silicon Standard
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Goodwork Semiconductor
LIS3DHTR
STMicroelectronics
LIS3DHTR by STMicroelectronics is a 16-terminal accelerometer with output range of 0.18-1.62V, ideal for motion sensing applications. Operating temperature ranges from -40 to 85°C, making it suitable for various environments. With a compact square package body of 3x3mm and digital voltage output type, it is commonly used in surface mount designs.
MBR0520LT3G
MBR0520LT3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, ideal for applications requiring high-speed switching and low power loss in compact electronic devices. The package style is small outline, making it suitable for surface mount designs in various electronics.
1N4148WS
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
New Jersey Semiconductor Products
AT04-12PA
Amphenol
The Amphenol AT04-12PA is a 2-row combination line connector with 12 contacts, rated for 13A signal current. It features polyethylene insulator material and operates b/w -55°C to 125°C. Ideal for cable mounting applications, mating with AT04-12SA connectors using crimp termination.
DT15-6P-G003
TE Connectivity
TE Connectivity's DT15-6P-G003 is a combination line connector with dimensions of 1.555" x 1.685" x 1.195". It has a rated voltage of 250V and can operate in temperatures ranging from -55°C to 125°C. This male connector with 6 contacts is commonly used for panel mounting applications requiring a max current of 13A.
4-2103015-1
TE Connectivity's 4-2103015-1 is a Combination Line Connector with dimensions of 1.295" x 2.177" x 1.087". Rated for 850V, it operates b/w -40°C to 125°C, featuring GLASS FILLED POLYAMIDE insulator material. Ideal for applications requiring FEMALE contact gender and W/STRAIN RELIEF mounting option.
1-640518-0
TE Connectivity 1-640518-0 is a Combination Line Connector with 3 contacts, rated voltage of 250V, and insulation resistance of 100M ohm. It has a body length of 0.84", suitable for applications requiring a durable connector with UL94V-0 flammability rating and operating temperatures from -55 to 85°C.
12015782
Aptiv
DT04-2P
The TE Connectivity DT04-2P is a combination line connector with 1.708" body length, 250V rated voltage, and GLASS FILLED POLYAMIDE insulator material. It is ideal for applications requiring a durable connector with 13A signal current rating, -55 to 125°C operating temperature range, and UL flammability rating of 94V-0.
ATM06-2S-EC01
Amphenol's ATM06-2S-EC01 is a female plug combination line connector with 2 contacts, rated for 7.5A signal current. Made of polyethylene, it operates b/w -55°C to 125°C and is suitable for cable mounting applications.
AT06-12SC-RD01
The Amphenol AT06-12SC-RD01 is a Combination Line Connector with 12 contacts, rated at 13A signal current. Its dimensions are 1.795" x 0.72" x 1.232", made of POLYETHYLENE for -55 to 125°C applications. Ideal for cable mounting, this connector features female gender contacts in a plug shell style with round pin sockets.
DT04-3P-EE01
TE Connectivity's DT04-3P-EE01 is a 2-row, 3-contact combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 13A, it operates b/w -55 to 125°C. Ideal for cable mounting applications requiring a polarized male receptacle with strain relief.
1-770968-0
Tyco Electronics Amp
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; IEC Conformity: NO; Mixed Contacts: NO; JESD-609 Code: e3;
776164-2
TE Connectivity's 776164-2 is a Combination Line Connector with dimensions of 2.496" x 1.323" x 1.362". It features GLASS FILLED POLYBUTYLENE TEREPHTHALATE insulator, UL Flammability Code 94V-0, and rated current of 17A. Ideal for applications requiring a polarized connector with 35 contacts and operating temperatures from -40°C to 125°C.
2103124-4
TE Connectivity's 2103124-4 is a Combination Line Connector with EMI shielding, male contact gender, and blade pin-skt contact style. It has a body length of 1.78", width of 1.59", and depth of 1.224". Ideal for commercial applications requiring a mains connector rating of 115/230VAC.
2-2834074-2
TE Connectivity's 2-2834074-2 is a Combination Line Connector with dimensions of 0.382" x 0.321" x 0.638". It has an operating temperature range of -40 to 105°C, UL flammability rating of 94V-0, and can handle up to 5A signal current. Ideal for cable mounting applications requiring a female crimp terminal plug.
12015788
Aptiv's 12015788 is a COMBINATION LINE CONNECTOR with 0.814" Body Length and 1.417" Body Depth. It features 2 Rows Loaded, 4 Contacts, FEMALE Gender, and RND PIN-SKT Style. Ideal for automotive applications requiring reliable electrical connections in limited space.
DTM04-3P-E005
TE Connectivity's DTM04-3P-E005 is a 1.68"x.816"x.638" combination line connector with GLASS FILLED POLYAMIDE insulator, rated for 250V and -55 to 125°C. It has 3 contacts, UL94V-0 flammability code, and polarized key, suitable for cable mounting applications at 7.5A signal current.
DT06-12SD-CE06
TE Connectivity's DT06-12SD-CE06 is a 2-row, 12-contact combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 13A, it operates b/w -55 to 125 °C, ideal for cable mounting applications requiring a polarized, UL-certified connector with strain relief.
DTM04-2P-P007
TE Connectivity's DTM04-2P-P007 is a 2" x 0.651" x 1.473" combination line connector with GLASS FILLED POLYAMIDE insulator for -55 to 125 °C operation. Rated at 250V, it has UL 94V-0 flammability code and supports up to 7.5A signal current. Ideal for panel mounting applications requiring a polarized male receptacle connector with strain relief option.
348292001
Molex
Molex 348292001 is a Combination Line Connector with 20 contacts in 2 loaded rows. Made of GLASS FILLED PBT, it's a male connector for board mounting via solder termination. Ideal for applications requiring reliable electrical connections in compact spaces.
AT04-3P-L012
The Amphenol AT04-3P-L012 is a male combination line connector with 3 contacts, rated for 13A signal current. Its polyethylene insulator can withstand temperatures from -55°C to 125°C. With a body size of 1.594" x 1.252" x 1.701", it is suitable for cable and panel mounting applications.
DT04-2P-CE01
TE Connectivity's DT04-2P-CE01 is a 1.818" x 0.675" x 0.67" combination line connector with GLASS FILLED POLYAMIDE insulator, rated for 250V and -55 to 125°C. It features UL 94V-0 flammability code, polarized key, and male contact gender. Ideal for applications requiring a 13A signal current in cable mounting setups.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved