Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Molex 510470300 is a male board connector with 3 contacts, featuring a mating contact pitch of 0.049". It has a body length of 0.217" and insulation resistance of 100M ohm. Ideal for commercial applications, it operates b/w -40 to 85°C and uses crimp termination on cables.
Median Price
$0.148
Lifecycle Status
Suppliers In-Stock
30
In-Stock Inventory
1k+
RS (Exports)
1+ parts
$0.090
100+ parts
-
1k+ parts
10k+ parts
Interstate Connecting
$0.124
$0.101
Heilind Electronics
$0.133
$0.107
Adafruit Industries
$0.137
$0.130
Misumi USA
$0.150
Mouser Electronics
$0.240
$0.163
$0.138
$0.127
Newark
$0.263
$0.171
$0.147
RS Americas
$0.287
$0.192
$0.158
DigiKey
$0.330
$0.193
$0.154
$0.123
Farnell
$0.368
$0.165
$0.161
Element14
$0.387
$0.259
$0.223
TTI Europe
$0.129
Verical
$0.060
Powell Electronics
$0.109
$0.105
TTI
$0.131
$0.110
Chip1Stop
$0.190
$0.168
Master Electronics
$0.122
Distrelec
PSC Electronics
Digiode
$0.062
TestEquity
$0.120
Nova Conductors
$0.139
Maritex
$0.464
$0.118
$0.079
$0.071
Bristol Electronics
$0.649
$0.324
$0.081
Dan-Mar Components
IBS Electronics
TME
$0.181
Vyrian
VNN
Bisco
Corphita
$0.058
Semicontronic
$0.096
$0.094
$0.093
Netroflash
$0.132
Aztec Data Supply Inc.
$4.631
Perfect Parts
Assy Fe
EMSNET (Excess)
Continental Prestige Electronics
Authorized Procurement Solutions
Argo Parts USA
Standard Data Resources (Excess)
The small contact pitch allows for a high density of connections, making this product suitable for applications where space is limited.
The compact body length helps in saving space on the board and makes the product suitable for compact electronic devices.
High insulation resistance ensures reliable and stable connections, preventing any electrical leakage and ensuring safety.
The slim body width allows for close placement of connectors on the board, facilitating efficient use of space.
A moderate body depth provides stability and durability to the connector, making it suitable for long-term use.
The use of this durable insulator material enhances the product's reliability and ensures resistance to heat and chemicals.
The high maximum operating temperature makes this product suitable for use in various environments without risk of overheating.
The low minimum operating temperature ensures the product can function effectively even in cold conditions.
Specifically designed for board connections, ensuring a secure and stable connection point for electronic components.
The UL 94V-0 flammability rating indicates that the product meets industry safety standards for fire resistance.
With multiple contact points, this product enables multiple connections within a single interface, enhancing versatility.
Designed for cable mounting, making it easy to connect to external devices or components.
Crimp termination offers a secure and reliable connection method, ensuring minimal signal loss or interference.
The male contact gender is compatible with female connectors, ensuring a proper and secure fit during connections.
Low contact resistance ensures efficient transmission of signals without significant loss or interference.
The plug style allows for easy and quick connections, making it convenient for use in various electronic devices.
The square pin socket style provides a stable and secure connection point for the contacts, ensuring reliable signal transmission.
The locking mounting option ensures a secure and stable connection, preventing accidental disconnection.
The rectangular contact pattern offers a standardized interface for connections, ensuring compatibility with a range of devices.
Designed for commercial use, this product offers reliable performance and durability in various applications.
Headers & Edge Type Connectors 510470300 attributes and parameters. Explore more Headers & Edge Type Connectors devices from Molex
Additional Features:
Body Width:
Body Depth:
Body Length:
Body or Shell Style:
Connector Type:
Mating Contact Finish:
Contact Gender:
Contact Material:
Contact Pattern:
Contact Resistance:
Contact Style:
DIN Conformance:
Filter Feature:
IEC Conformity:
Insulation Resistance:
Insulator Material:
MIL Conformity:
Manufacturer Series:
Mating Contact Pitch (inch):
Mating Info.:
Mixed Contacts:
Mounting Option-1:
Mounting Type:
No. of Rows Loaded:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
Reference Standard:
Reliability:
Sub-Category:
Termination Type:
Total No. of Contacts:
UL Flammability Code:
510470300 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.40
SB
PCN Design/Specification - 51004,51022,51047,51065 Series 28/Oct/2015
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
1N4148
National Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BSS138-TP
Micro Commercial Components
BSS138-TP by Micro Commercial Components is a N-channel small signal FET with a min DS breakdown voltage of 50V and max drain current of 0.22A. It is commonly used in applications requiring enhancement mode operation, such as power management and switching circuits.
1N4148WS
Rectron
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
Shanghai Lunsure Electronic Technology
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JESD-30 Code: O-MBCY-W3;
LM317T
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Package Shape: RECTANGULAR; Minimum Input-Output Voltage Differential: 3 V;
Central Semiconductor
M85049/85-08W02
Amphenol
CIRCULAR CONN ACCESSORY; Shell Sizes: 8; 9; IEC Conformity: NO; MIL-Connector Accessory Name: BAND LOCK ADAPTER; MIL Conformity: YES; DIN Conformity: NO;
Lite-on Semiconductor
Promax-johnton
M39029/56351
Esterline Technologies
CONNECTOR ACCESSORY; IEC Conformity: NO; Contact Gender: FEMALE; DIN Conformity: NO; MIL-Connector Accessory Name: CONTACT; Tool Settings: M22520/2-10;
SMBJ18CA
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
International Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.1 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
Changzhou Galaxy Century Microelectronics
BSS138
Zetex Plc
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Style (Meter): SMALL OUTLINE; Maximum Operating Temperature: 150 Cel;
B340A-13-F
SPC TECHNOLOGY/ MULTICOMP
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Dc Components
1N5819HW-7-F
Diodes Incorporated
1N5819HW-7-F by Diodes Inc. is a Schottky rectifier diode with 40V reverse test voltage, 1A output current, and 0.75V forward voltage. It's a surface mount device in a small outline package ideal for efficiency applications at temperatures ranging from -65 to 125°C.
1554216002
Molex
WIRE AND CABLE;
DF11-18DS-2C
Hirose Electric
DF11-18DS-2C by Hirose Electric is a 2-row board connector with 18 contacts, rated at 2A signal current. It features a mating contact pitch of 0.079", insulation resistance of 1Gohm, and dielectric voltage withstand of 650VAC. Ideal for commercial applications requiring durable connectors with crimp termination and black insulator color.
70107-0001
Molex 70107-0001 is a board connector with 0.1" pitch, ideal for cable mounting. Featuring polyester insulator material, it has 2 contacts and UL94V-0 flammability rating. This rectangular connector uses crimp termination and male SQ pin-skt contact style, suitable for various edge type applications.
B2PS-VH(LF)(SN)
J S T Mfg
B2PS-VH(LF)(SN) by J S T Mfg is a BOARD CONNECTOR with 0.156" pitch, 10A signal current, and 1500VAC dielectric voltage. It has POLYAMIDE66 insulator for -25 to 85 °C operation. Ideal for PCBs needing right angle mounting with solder termination and male contact gender.
SFW8S-2STE1LF
Amphenol Communications Solutions
The Amphenol Communications Solutions SFW8S-2STE1LF is an FFC/FPC connector with 0.039" mating contact pitch and 8 contacts. It features tin termination finish, UL 94V-0 flammability code, and surface mount termination. Ideal for board mounting applications requiring a straight female contact gender configuration.
35362-0350
Molex 35362-0350 is a board connector with 3 contacts, featuring a mating contact pitch of 0.079" and body dimensions of 0.382" x 0.217" x 0.335". It uses TIN over copper termination for reliability in commercial applications.
B3B-XH-AM(LF)(SN)
B3B-XH-AM(LF)(SN) by J S T Mfg is a BOARD CONNECTOR with 3 contacts, BRASS material, and Tin (Sn) finish. It has a terminal pitch of 2.5mm and UL94V-0 flammability rating. Ideal for board mounting applications in electronics requiring reliable male connectors.
S4B-PH-SM4-TB(LF)(SN)
S4B-PH-SM4-TB(LF)(SN) by J S T Mfg is a 4-contact board connector with mating pitch of 0.079". It features tin copper termination, polyamide6T insulator, and right angle mounting style. Ideal for applications requiring surface mount connectors with male contact gender and rectangular contact pattern.
1-826656-0
TE Connectivity
TE Connectivity 1-826656-0 is a board connector with 20 contacts, rated at 5A. It features tin termination finish, PBT insulator, and phosphor bronze contact material. With UL certification and green insulator color, it is ideal for applications requiring high insulation resistance and operating temperatures from -65 to 105°C.
47309-2651
Molex 47309-2651 is a PCB connector with 0.043" pitch, GOLD finish, and 100000000 ohm insulation resistance. Ideal for commercial applications, it has a durability of 10000 cycles and operates b/w -40 to 85 °C.
801-43-025-10-003000
Mill-max Mfg
801-43-025-10-003000 by Mill-max Mfg is a GOLD-finished BOARD CONNECTOR with 25 contacts, 2.54mm pitch, and FEMALE gender. It is used in applications requiring SOCKET-style connectors for straight BOARD mounting using SOLDER termination.
NSHR-03V-S
NSHR-03V-S by J S T Mfg is a 3-contact BOARD CONNECTOR with TIN finish, ideal for CABLE mounting. Made of COPPER ALLOY, it has UL 94V-0 flammability rating and features FEMALE contacts suitable for CRIMP termination.
50-57-9403
Molex 50-57-9403 is a board connector with 0.1" pitch, suitable for commercial applications. It features a body length of 0.299", insulation resistance of 10^10 ohm, and operating temperature range from -40 to 105°C. Ideal for use in cable mounting scenarios with crimp termination and female contact gender.
FH12A-40S-0.5SH(55)
FH12A-40S-0.5SH(55) by Hirose Electric is a FFC/FPC connector with 40 contacts, gold termination finish, and 500M ohm insulation resistance. It operates b/w -40 to 85°C, has a mating pitch of 0.02", and is used in board mounting applications requiring high durability and reliability.
61302621121
Wuerth Elektronik & Kg
61302621121 by Wurth Elektronik is a male board connector with 26 contacts, gold over nickel finish, and 0.1-inch mating contact pitch. It features a polyamide6T insulator material, operates b/w -40 to 105 °C, and has a durability of 25 cycles. Ideal for commercial applications requiring a reliable connection on PCBs with rectangular contact patterns.
61301021121
61301021121 by Wurth Elektronik is a Board Connector with 10 contacts, rated at 3A signal current. It features gold over nickel termination finish, polybutylene terephthalate insulator material, and copper alloy contact material. Ideal for commercial applications requiring a reliable connection on PCBs with a mating contact pitch of 0.1 inch.
SM02B-BHSS-1-TB(LF)(SN)
SM02B-BHSS-1-TB(LF)(SN) by J S T Mfg is a BOARD CONNECTOR with 0.138" pitch, 0.295" length, and 0.126" width. Ideal for SURFACE MOUNT applications, it features FEMALE contact gender, BRASS material, and POLYAMIDE insulator.
851-43-045-10-011000
BOARD CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED;
1-2199230-4
TE Connectivity 1-2199230-4, a card edge connector with 67 contacts, features 0.5A signal current rating. With POLYETHYLENE insulator and UL94V-0 flammability code, it operates b/w -40 to 80°C. Ideal for board mounting applications with right-angle mounting style.
DF11-16DP-2DSA(01)
DF11-16DP-2DSA(01) by Hirose Electric is a 16-contact board connector with 0.079" pitch, 650VAC dielectric voltage, and gold finish. It is used in applications requiring a durable, high-current signal connection with UL and CSA standards compliance. The connector has a straight mounting style, black insulator color, and operates b/w -30 to 85°C temperatures.
BM02B-SRSS-TBT(LF)(SN)
BM02B-SRSS-TBT(LF)(SN) by J S T Mfg is a BOARD CONNECTOR with COPPER ALLOY contacts, TIN finish, and 94V-0 UL rating. It has 2 contacts for SURFACE mounting, ideal for electronic devices requiring reliable male connectors in STRAIGHT configuration.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
5-104935-3
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Rated Current - Signal: 3 A;
5-104549-2
Tyco Electronics Amp
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Termination Contact Finish: TIN OVER NICKEL; Terminal Pitch (mm): 1.27; Manufacturer Series: 104549;
TE Connectivity 5-104549-2 is a 20-contact board connector with 0.05" pitch, suitable for PCBs. It features polyethylene insulation, 1A signal current rating, and -65 to 105°C operating temperature range. Ideal for commercial applications requiring durable connectors with high insulation resistance.
5-104068-4
TE Connectivity 5-104068-4 is a 40-contact board connector with 0.05" pitch, suitable for commercial applications. It features liquid crystal polymer insulator, tin finish with nickel barrier, and operates b/w -65 to 105°C. Ideal for PCB connections requiring high insulation resistance and dielectric voltage withstand capabilities.
5-104069-2
TE Connectivity 5-104069-2 is a 50-contact board connector with 0.05" pitch, suitable for headers & edge type connectors. Featuring 500VAC dielectric voltage, it has a temperature range of -65 to 105°C. With a durable design and solder termination, it's ideal for commercial applications requiring high reliability.
5-104363-1
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Body Depth: .535 inch;
5-104069-6
TE Connectivity 5-104069-6 header connector features 0.05" contact pitch, 500VAC dielectric voltage, and 3.6A signal current rating. Ideal for board connections in commercial applications with black insulator color and liquid crystal polymer material.
5-104071-7
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 500VAC; No. of Connectors: ONE;
5-104361-2
TE Connectivity 5-104361-2 is a board connector with 0.1" pitch, suitable for commercial applications. Featuring brass contacts, it has a rated current of 3A and insulation resistance of 5Gohm. With a temperature range from -65 to 105°C, this right-angle receptacle connector offers durability with 75 cycles.
5-104361-1
TE Connectivity 5-104361-1 is a board connector with 0.1" pitch, suitable for commercial applications. Featuring tin finish, it has an insulation resistance of 5G ohm and operates b/w -65 to 105°C. With male gender and right-angle mounting style, it offers durability of 75 cycles.
5-104068-3
TE Connectivity 5-104068-3 is a 30-contact board connector with 0.05" pitch, suitable for commercial applications. It features liquid crystal polymer insulation, tin finish contacts, and 500VAC dielectric voltage. With a temperature range of -65 to 105°C, it offers reliable signal current rating of 3.6A.
510470200
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Body Length: .167 inch; MIL Conformity: NO;
510470400
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Body Depth: .315 inch;
5-104363-5
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Mixed Contacts: NO;
5-104655-1
TE Connectivity 5-104655-1 is a board connector with 10 contacts, rated at 0.5A signal current. It features a mating contact pitch of 0.05", insulation resistance of 5000000000 ohm, and operates b/w -65 to 105 °C. Ideal for applications requiring durable connectors with surface mount termination and polarized key for easy installation.
5-104935-7
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Empty Shell: YES;
5-104069-3
5-104069-4
5-104068-5
510470500
The Molex 510470500 is a male board connector with 5 contacts, featuring a mating contact pitch of 0.049", insulation resistance of 100M ohm, and operating temperatures from -40 to 85°C. It is used in commercial applications for cable mounting with crimp termination, UL-rated for flammability.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved