Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
The Molex 510470200 is a male board connector with 2 contacts, featuring a mating contact pitch of 0.049", insulation resistance of 100M ohm, and operating temperature range from -40 to 85°C. It is used in commercial applications for cable mounting with crimp termination, UL-rated for flammability.
Median Price
$0.127
Lifecycle Status
Suppliers In-Stock
34
In-Stock Inventory
1k+
Newark
1+ parts
$0.062
100+ parts
1k+ parts
10k+ parts
-
RS Americas
$0.084
Verical
$0.103
$0.101
Interstate Connecting
$0.118
$0.096
Heilind Electronics
$0.102
Misumi USA
$0.130
Distrelec
$0.162
$0.140
Mouser Electronics
$0.210
$0.139
$0.116
DigiKey
$0.270
$0.157
$0.123
Element14
$0.373
$0.194
Adafruit Industries
$2.182
$1.986
$1.789
NEP Electronics
TTI
Master Electronics
$0.111
Powell Electronics
$0.104
Farnell
$0.159
Chip1Stop
$0.113
$0.106
RS (Exports)
PSC Electronics
Digiode
$0.059
TestEquity
$0.110
Nova Conductors
$0.121
DF Sales Co.
TME
$0.200
$0.161
IBS Electronics
Vyrian
LIBRA Elektronik GmbH
VNN
Elcom Components
Standard Data Resources
Semtec, LLC
Semi Source
Speed Components Ltd
Corphita
$0.056
Argo Parts USA
$0.117
Netroflash
$0.119
Continental Prestige Electronics
Andel Nordic
$2.225
$2.136
Aztec Data Supply Inc.
$2.857
Perfect Parts
EMSNET (Excess)
Assy Fe
Kepictronics
Authorized Procurement Solutions
FE SAS
ErreBi Group
GreenTree Electronics
The close proximity of the mating contacts ensures a strong and reliable connection between the connectors.
The compact body length allows for space-efficient installation in electronic devices.
High insulation resistance prevents leakage of current and ensures safe operation of the connectors.
The slim body width enables easy integration of the connectors in tight spaces.
Sufficient body depth provides stability and durability to the connectors during operation.
The use of this material ensures excellent electrical insulation and mechanical strength for long-lasting performance.
The high maximum operating temperature makes the connectors suitable for a wide range of applications.
The low minimum operating temperature allows for reliable performance even in harsh environmental conditions.
This type of connector is commonly used for board-to-board or board-to-cable connections, offering versatility in various electronic setups.
The UL 94V-0 flammability rating indicates that the connectors have excellent fire resistance, ensuring safety in case of overheating.
Compliance with UL standards ensures that the connectors meet stringent quality and safety requirements.
With two contacts, the connectors provide a basic but essential connection for electronic devices.
The cable mounting type offers flexibility in installation and allows for easy connection to external devices.
Crimp termination provides a secure and reliable connection between the cable and the connector pins.
Male contacts are commonly used for providing power or signal transmission, making these connectors suitable for various applications.
Low contact resistance ensures efficient power or signal transmission between the connected devices.
The plug style allows for easy insertion and removal of the connectors, making them user-friendly.
This contact style provides a secure and stable connection between the male and female contacts, ensuring reliable signal transmission.
The locking mounting option adds an extra layer of security, preventing accidental disconnection of the connectors.
Rectangular contact pattern allows for easy alignment and mating of the connectors, ensuring a proper connection every time.
Commercial reliability indicates that the connectors are suitable for standard commercial use and offer dependable performance.
Headers & Edge Type Connectors 510470200 attributes and parameters. Explore more Headers & Edge Type Connectors devices from Molex
Additional Features:
Body Width:
Body Depth:
Body Length:
Body or Shell Style:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Pattern:
Contact Resistance:
Contact Style:
DIN Conformance:
Filter Feature:
IEC Conformity:
Insulation Resistance:
Insulator Material:
MIL Conformity:
Mating Contact Pitch (inch):
Mating Info.:
Mixed Contacts:
Mounting Option-1:
Mounting Type:
No. of Rows Loaded:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
Reference Standard:
Reliability:
Sub-Category:
Termination Type:
Total No. of Contacts:
UL Flammability Code:
510470200 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.40
SB
PCN Design/Specification - 51004,51022,51047,51065 Series 28/Oct/2015
PCN Assembly/Origin - 510470y00 Additional Location 14/Apr/2021
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
M39029/56-351
Carlisle Interconnect Technologies
CONNECTOR ACCESSORY; MIL Conformity: YES; Contact Type: CRIMP; Removal Tools: M81969/8-06, M81969/14-02; IEC Conformity: NO; Contact Gender: FEMALE;
2N7002
STMicroelectronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Drain Current (ID): .2 A; Transistor Application: SWITCHING;
CRCW04020000Z0ED
Vishay Intertechnology
Vishay Intertechnology's CRCW04020000Z0ED is a 0 ohm jumper resistor with METAL GLAZE/THICK FILM tech. Operating b/w -55 to 155 °C, it suits SMT applications in automotive electronics due to AEC-Q200 compliance and 0.063 W power dissipation.
MBRS130LT3G
Rochester Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Goodwork Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
DS18B20U+
Analog Devices
DS18B20U+ by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.
BAV99
Lite-on Technology
RECTIFIER DIODE; Surface Mount: YES; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Operating Temperature: 175 Cel; Maximum Output Current: .1 A; Maximum Reverse Recovery Time: .006 us;
STM32F405RGT6TR
STM32F405RGT6TR by STMicroelectronics is a 32-bit microcontroller with 64 terminals, operating at a max frequency of 26 MHz. It features DAC and ADC channels, along with DMA support. Ideal for industrial applications requiring low power consumption and high-speed processing capabilities.
2N2222A
Texas Instruments
2N2222A by Texas Instruments is a small signal NPN bipolar junction transistor (BJT) with a max collector-emitter voltage of 40V and a max collector current of 0.8A. It is commonly used for switching applications due to its fast turn on/off times (35ns/285ns) and high transition frequency (300MHz).
ERJ6ENF10R0V
Panasonic
Panasonic ERJ6ENF10R0V is a 10 ohm fixed resistor with 1% tolerance, suitable for surface mount applications. With a rated power dissipation of 0.125W and operating voltage of 150V, it operates b/w -55°C to 155°C. Its metal glaze/thick film technology ensures stable performance in various electronic circuits.
LM358AN
Philips Semiconductors
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
Silicon Standard
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LFXTAL025159REEL
Iqd Frequency Products
LFXTAL025159REEL by IQD Frequency Products is a 32.768 kHz crystal oscillator with 20 ppm frequency tolerance and 40,000 ohm series resistance. It is ideal for applications requiring precise timekeeping, such as real-time clocks in IoT devices or microcontrollers in wearables. The surface-mount design with a drive level of 1 uW makes it suitable for compact electronic systems.
FDV304P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Moisture Sensitivity Level (MSL): 1; Maximum Drain Current (ID): .46 A;
BSS138
Vishay Intertechnology's BSS138 is a N-CHANNEL FET with SINGLE configuration and ENHANCEMENT MODE operation. It features 0.35W power dissipation, METAL-OXIDE SEMICONDUCTOR tech, and 150°C max temp. Ideal for surface mount applications in various electronic circuits requiring efficient power management.
SMBJ18CA
Good-ark Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Maximum Time At Peak Reflow Temperature (s): 10; JESD-609 Code: e3;
Weitron Technology
RECTIFIER DIODE; Surface Mount: YES; Maximum Operating Temperature: 150 Cel; Maximum Output Current: .215 A; JESD-609 Code: e0; Maximum Forward Voltage (VF): .715 V;
1N4148
Sensitron Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BAV99+
Multicomp Pro
BAV99+ by Multicomp Pro is a series connected diode with 0.2A output current and 75V peak reverse voltage. Its 0.006us reverse recovery time makes it ideal for high-speed applications. This small outline rectifier diode is designed for surface mount installation in electronic circuits.
Vishay Sprague
801-43-039-10-003000
Mill-max Mfg
Mill-max Mfg's 801-43-039-10-003000 is a GOLD-finished BOARD CONNECTOR with 39 contacts, 2.54mm pitch, and FEMALE gender. It is a SOCKET type connector for BOARD mounting applications requiring SOLDER termination in STRAIGHT mounting style.
50-57-9403
Molex
Molex 50-57-9403 is a board connector with 0.1" pitch, suitable for commercial applications. It features a body length of 0.299", insulation resistance of 10^10 ohm, and operating temperature range from -40 to 105°C. Ideal for use in cable mounting scenarios with crimp termination and female contact gender.
2-5767004-2
Tyco Electronics Amp
BOARD STACKING CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Manufacturer Series: 5767004; Mounting Style: STRAIGHT; Total No. of Contacts: 38;
330-10-122-00-240000
330-10-122-00-240000 by Mill-max Mfg is a BOARD CONNECTOR with 22 contacts, SOLDER termination, and MALE gender. It is used for CABLE mounting in STRAIGHT style applications.
22-10-2021
Molex 22-10-2021 header connector features 0.1" pitch, 0.19" body length, and 1000000000 ohm insulation resistance. Ideal for board connections in commercial applications with a temperature range of 0-75°C. Male contact pins with matte tin finish over nickel for durability and reliability in PCB mounting.
51021-0400
The Molex 51021-0400 is a board connector with 4 contacts, 0.049" pitch, and 353VAC voltage rating. Ideal for commercial applications, it features a polarization key, POLYBUTYLENE TEREPHTHALATE insulator, and operates b/w -40 to 105°C.
502
Keystone Electronics
PCB CONNECTOR; Option: GENERAL PURPOSE; Contact Material: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE; DIN Conformance: NO; MIL Conformity: NO;
S3B-PH-SM4-TB(LF)(SN)
J S T Mfg
S3B-PH-SM4-TB(LF)(SN) by J S T Mfg is a BOARD CONNECTOR with 0.079" pitch, 2A signal current, and 800VAC dielectric voltage. Ideal for applications requiring male connectors with surface mount termination and right angle mounting style.
1473005-1
TE Connectivity
TE Connectivity's 1473005-1 is a CARD EDGE CONNECTOR with 200 contacts, POLYETHYLENE insulator, and 0.024" mating contact pitch. Ideal for board mounting applications, it offers a durability of 25 cycles and operates b/w -55°C to 85°C.
BM08B-GHS-TBT(LF)(SN)(N)
BM08B-GHS-TBT(LF)(SN)(N) by J S T Mfg is an 8-contact board connector with TIN over copper finish. It features phosphor bronze contact material, UL 94V-0 flammability code, and 1.25mm terminal pitch for surface mount termination. Ideal for applications requiring male gender connectors in straight mounting style on circuit boards.
22-23-2021
Molex 22-23-2021 header connector features 0.1" mating contact pitch, 0.194" body length, and 1000000000 ohm insulation resistance. Ideal for board connections in commercial applications with UL and CSA standards compliance.
7-215083-6
TE Connectivity 7-215083-6 is a dual-row board connector with 0.1" pitch, rated for 100V and 1.5A signal current. It features GLASS FILLED POLYBUTYLENE TEREPHTHALATE insulator, suitable for commercial applications in cable mounting with 28 AWG wires.
FTSH-105-01-F-DV-K-FR
Samtec
Samtec's FTSH-105-01-F-DV-K-FR is a 10-contact, 2-row male board connector with tin finish. It has a terminal pitch of 1.27mm and UL94V-0 flammability rating. Ideal for surface mount applications in headers & edge type connectors.
61302821121
Wuerth Elektronik & Kg
Wurth Elektronik 61302821121 is a 28-contact board connector with gold over nickel finish. It has a pitch of 0.1 inch, rated for 3A signal current, and operates b/w -40 to 125°C. Ideal for commercial applications requiring reliable male connectors on PCBs with rectangular contact patterns at a spacing of 2.54mm.
22-01-3067
The Molex 22-01-3067 is a board connector with a mating contact pitch of 0.1 inch and a body length of 0.622 inch. It has an insulation resistance of 1000000000 ohm and can withstand a dielectric voltage of 700VAC. This connector is commonly used in commercial applications due to its durability, removable contact block design, and polarization key feature.
43645-0500
The Molex 43645-0500 is a board connector with 5 contacts, featuring a mating contact pitch of 0.118", insulation resistance of 1Gohm, and operating temperatures from -40 to 105°C. It is commonly used in commercial applications requiring durable connectors with crimp terminations for cable mounting.
PHR-6
PHR-6 by J S T Mfg is a 6-contact board connector with 0.079" pitch, suitable for cables with 24-30 AWG wires. It features POLYAMIDE66 insulation, 800VAC dielectric voltage, and operates b/w -25 to 85°C. Ideal for applications requiring a polarized housing and UL94V-0 flammability rating.
22-01-3037
The Molex 22-01-3037 is a board connector with 3 contacts, rated at 4A signal current. Featuring a mating contact pitch of 0.1", it has a durable design with removable contact blocks and polarization key for easy assembly. With an insulation resistance of 1Gohm and operating temperature range from -40 to 105°C, it is ideal for commercial applications requiring reliable connections.
PAP-02V-S
PAP-02V-S by J S T Mfg is a BOARD CONNECTOR with 0.079" pitch, 3A signal current rating, and 800VAC dielectric voltage. It features POLYAMIDE66 insulation material and operates b/w -25 to 85°C. Ideal for cable mounting applications requiring a reliable female SQ PIN-SKT contact style connector.
53261-0771
Molex 53261-0771 is a board connector with a mating contact pitch of 0.049". It has a body length of 0.531" and insulation resistance of 100000000 ohm. This connector is commonly used in commercial applications requiring a surface mount termination type.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
5-104935-3
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Rated Current - Signal: 3 A;
5-104549-2
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Termination Contact Finish: TIN OVER NICKEL; Terminal Pitch (mm): 1.27; Manufacturer Series: 104549;
TE Connectivity 5-104549-2 is a 20-contact board connector with 0.05" pitch, suitable for PCBs. It features polyethylene insulation, 1A signal current rating, and -65 to 105°C operating temperature range. Ideal for commercial applications requiring durable connectors with high insulation resistance.
5-104068-4
TE Connectivity 5-104068-4 is a 40-contact board connector with 0.05" pitch, suitable for commercial applications. It features liquid crystal polymer insulator, tin finish with nickel barrier, and operates b/w -65 to 105°C. Ideal for PCB connections requiring high insulation resistance and dielectric voltage withstand capabilities.
5-104069-2
TE Connectivity 5-104069-2 is a 50-contact board connector with 0.05" pitch, suitable for headers & edge type connectors. Featuring 500VAC dielectric voltage, it has a temperature range of -65 to 105°C. With a durable design and solder termination, it's ideal for commercial applications requiring high reliability.
5-104363-1
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Body Depth: .535 inch;
5-104069-6
TE Connectivity 5-104069-6 header connector features 0.05" contact pitch, 500VAC dielectric voltage, and 3.6A signal current rating. Ideal for board connections in commercial applications with black insulator color and liquid crystal polymer material.
5-104071-7
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 500VAC; No. of Connectors: ONE;
5-104361-2
TE Connectivity 5-104361-2 is a board connector with 0.1" pitch, suitable for commercial applications. Featuring brass contacts, it has a rated current of 3A and insulation resistance of 5Gohm. With a temperature range from -65 to 105°C, this right-angle receptacle connector offers durability with 75 cycles.
5-104361-1
TE Connectivity 5-104361-1 is a board connector with 0.1" pitch, suitable for commercial applications. Featuring tin finish, it has an insulation resistance of 5G ohm and operates b/w -65 to 105°C. With male gender and right-angle mounting style, it offers durability of 75 cycles.
5-104068-3
TE Connectivity 5-104068-3 is a 30-contact board connector with 0.05" pitch, suitable for commercial applications. It features liquid crystal polymer insulation, tin finish contacts, and 500VAC dielectric voltage. With a temperature range of -65 to 105°C, it offers reliable signal current rating of 3.6A.
510470400
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Body Depth: .315 inch;
5-104363-5
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Mixed Contacts: NO;
5-104655-1
TE Connectivity 5-104655-1 is a board connector with 10 contacts, rated at 0.5A signal current. It features a mating contact pitch of 0.05", insulation resistance of 5000000000 ohm, and operates b/w -65 to 105 °C. Ideal for applications requiring durable connectors with surface mount termination and polarized key for easy installation.
5-104935-7
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Empty Shell: YES;
5-104069-3
510470300
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Contact Material: NOT SPECIFIED; Body or Shell Style: PLUG;
5-104069-4
5-104068-5
510470700
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; IEC Conformity: NO; Body Depth: .315 inch;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved