Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
USB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Filter Feature: NO; Mixed Contacts: NO; Shell Finish: TIN LEAD;
Median Price
-
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
1k+
Digiode
1+ parts
100+ parts
1k+ parts
10k+ parts
Vyrian
Corphita
Telecom & Datacom Connectors 500075-0507 attributes and parameters. Explore more Telecom & Datacom Connectors devices from Molex
Additional Features:
Body or Shell Style:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
DIN Conformance:
Empty Shell:
Filter Feature:
IEC Conformity:
Insulator Material:
JESD-609 Code:
MIL Conformity:
Mixed Contacts:
Mounting Style:
Mounting Type:
Option:
Shell Finish:
Shell Material:
Termination Type:
Total No. of Contacts:
UL Flammability Code:
500075-0507 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
2N2222A
General Transistor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
1N4148
North American Philips Discrete Products Div
RECTIFIER DIODE; Surface Mount: NO; Maximum Forward Voltage (VF): 1 V; JESD-609 Code: e0; Maximum Repetitive Peak Reverse Voltage: 100 V; Terminal Finish: Tin/Lead (Sn/Pb);
CSNF651
Honeywell Sensing And Control
CSNF651 by Honeywell Sensing And Control is an industrial-grade analog circuit with 3 terminals. It operates b/w -40 to 85°C, supporting supply voltages from -15V to 15V. Ideal for applications requiring a special shape rectangular package style and through-hole terminal form.
Formosa Microsemi
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Allegro MicroSystems
ERJ3EKF1002V
Panasonic
Panasonic's ERJ3EKF1002V is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. It operates b/w -55 to 155 °C and is ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance.
BAV99
Kec
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1554216002
Molex
WIRE AND CABLE;
IRLML6402TRPBF
Infineon Technologies
IRLML6402TRPBF by Infineon is a P-CHANNEL FET for SWITCHING applications. It features a 20V DS Breakdown Voltage, 22A IDM, and 0.065 ohm RDS(on). With a small outline package and matte tin finish, it operates in temperatures from -55 to 150 °C.
General Diode
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Reverse Recovery Time: .004 us; Terminal Finish: Tin/Lead (Sn/Pb); No. of Elements: 1;
1N4148WSF-7
Diodes Incorporated
1N4148WSF-7 by Diodes Inc. is a single silicon rectifier diode with max output current of 0.25A and max reverse voltage of 100V. It operates b/w -55 to 150°C, has a small outline package style, and is suitable for surface mount applications in various electronic circuits.
FDN5618P
Onsemi
FDN5618P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage. It features a single configuration with built-in diode, suitable for switching applications. With 10A IDM and 0.17 ohm RDS(on), it operates in the temperature range of -55 to 150 °C, making it ideal for various electronic devices.
DS18B20Z
Maxim Integrated
DS18B20Z by Maxim Integrated is a 12-bit digital temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Suitable for applications requiring precise temperature monitoring in compact spaces.
BSS138
Vishay Semiconductors
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Package Style (Meter): SMALL OUTLINE; Package Shape: RECTANGULAR; Transistor Application: SWITCHING;
Microsemi
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Minimum DC Current Gain (hFE): 30; No. of Elements: 1;
LM358AN
Texas Instruments
LM358AN by Texas Instruments is an Operational Amplifier with 2 functions. It has a Max Input Offset Voltage of 5000 uV and Nominal Common Mode Reject Ratio of 85 dB. Widely used in voltage-feedback applications due to its high Min Voltage Gain of 15000 and Unity Gain Bandwidth of 1000 kHz.
CRGCQ0805F10R
TE Connectivity
TE Connectivity's CRGCQ0805F10R is a 10 ohm fixed resistor with 1% tolerance and 400 ppm/°C temperature coefficient. It is a surface mount thick film resistor in an 0805 package, suitable for applications requiring precise resistance values in compact electronic circuits.
EEAGA1H4R7
Panasonic EEAGA1H4R7 is a 4.7uF, 50V Aluminum Electrolytic Capacitor with 0.1 Tan Delta and 0.003mA Leakage Current. Ideal for applications requiring high ripple current handling in temperatures ranging from -55 to 105°C.
LL4148
Itt Components
RECTIFIER DIODE; Surface Mount: YES; Maximum Reverse Recovery Time: .005 us; Config: SINGLE; Maximum Operating Temperature: 200 Cel; Maximum Non Repetitive Peak Forward Current: 1 A;
First Components International
5353928-2
TE Connectivity's 5353928-2 is a POLYETHYLENE insulator TELECOM AND DATACOM CONNECTOR with LOCATING POST board mounting. It has a max operating temp of 85°C and -55°C min. Ideal for telecom and datacom applications, featuring COPPER ALLOY shell material, TIN finish, and UL 94V-0 flammability rating.
2027180100
The Molex 2027180100 is a Telecom & Datacom Connector with 76 contacts, GLASS FILLED POLYETHYLENE insulator, and UL 94V-0 flammability rating. It is used for board and panel mounting in applications requiring surface mount termination, featuring female contact gender and right angle mounting style.
V890-1AX1-A1
Bel Fuse
V890-1AX1-A1 by Bel Fuse is a telecom and datacom connector with a body length of 0.626 inch and a body width of 0.652 inch. It features a termination contact finish of TIN SILVER COPPER and an insulator material of POLYBUTYLENE TEREPHTHALATE/POLYETHYLENE. This connector is commonly used in commercial applications for board and panel mounting.
449150011
Molex 449150011 is a Telecom & Datacom Connector with 0.46" body length, 500000000 ohm insulation resistance, and 1000VAC dielectric voltage. Ideal for telecom applications, it features POLYCARBONATE insulator material, UL94V-0 flammability rating, and supports 8 contacts with wire sizes ranging from 22 to 28 AWG.
76866-1013
The Molex 76866-1013 is a telecom and datacom connector with 144 contacts. It features a glass-filled polyethylene insulator material and has a UL flammability code of 94V-0. This right-angle mounting connector is suitable for board and panel applications.
SI-51005-F
Bel Fuse SI-51005-F is a Telecom & Datacom Connector with 0.708" body length, 0.599" width, and 1" depth. It features POLYETHYLENE insulator material, NICKEL/TIN shell finish, and SOLDER termination type. Ideal for board and panel mounting in telecommunications applications.
292303-5
TE Connectivity's 292303-5 USB connector has a body length of 0.575", insulation resistance of 1Gohm, and operates b/w -55 to 85°C. With a total of 4 contacts, it is used in telecom & datacom applications for board mounting with solderable retention clips.
67329-8000
Molex 67329-8000 USB connector has 0.276" body length, 0.57" width, and 0.539" depth. With 1A signal current rating, it's ideal for telecom/datacom applications. Features include tin contact finish, glass-filled polyamide insulator, and solder termination for durability.
SS-7188S-A-NF-50
Bel Fuse SS-7188S-A-NF-50 is a Telecom & Datacom Connector with POLYETHYLENE insulator, 50u plating thickness, and NICKEL/TIN shell finish. It has 8 contacts in a polarized housing for PCB mounting at 2.54mm pitch. Ideal for commercial applications requiring right angle mounting with solder termination.
MUC-20PFFR-JS8A02
Amphenol
USB CONNECTOR;
87703-0001
Molex 87703-0001 is a telecom & datacom connector with 0.05" contact pitch, 2.005" body length, and 1000000000 ohm insulation resistance. Ideal for board mounting applications in telecommunications and data communication systems due to its durable construction and high reliability standards.
J0011D21BNL
Pulse Electronics
J0011D21BNL by Pulse Electronics is a Telecom & Datacom Connector with dimensions of 0.64" x 0.545" x 0.85". Featuring Matte Tin finish, it has 8 contacts and is used in board and panel mounting applications for telecom and datacom systems.
10103592-0001LF
Amphenol Communications Solutions
The Amphenol Communications Solutions 10103592-0001LF USB connector features a body length of 0.295", insulation resistance of 100M ohm, and dielectric voltage rating of 100VAC. Ideal for telecom applications, this right-angle board-mounted connector has a durable stainless steel shell, POLYETHYLENE insulator, and FEMALE contact gender.
HDRA-E68LFDT
Honda Tsushin Kogyo
HDRA-E68LFDT by Honda Tsushin Kogyo is a 68-contact telecom/datacom connector with 0.031" mating contact pitch, 1.681" body length, and 1000000000 ohm insulation resistance. It features a POLYPHENYLENE SULFIDE insulator, PHOSPHOR BRONZE contact material, and NICKEL shell finish. Ideal for board and panel mounting in commercial applications requiring reliable signal transmission at 0.3A rated current.
MUSB-A511-004
MUSB-A511-004 by Amphenol is a USB connector with a body length of 1.181", body width of 0.709", and body depth of 0.637". It is commonly used in telecom and datacom applications, offering a rated current of 1.5A, insulation resistance of 1000000000 ohm, and dielectric withstand voltage of 500VAC.
124018612112A
USB CONNECTOR; Option: WATERPROOF; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 100VAC; PCB Contact Row Spacing (mm): 1.25; Body Depth: .341 inch;
09454521910
Harting Electronics & Kg
TELECOM AND DATACOM CONNECTOR; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE;
RJHSE-5080-08
RJHSE-5080-08 by Amphenol is a Telecom & Datacom Connector with 64 contacts, rated at 1.5A signal current. It features a dielectric voltage of 1000VAC and insulation resistance of 500MΩ, suitable for board and panel mounting applications. The connector has a durable stainless steel shell, UL flammability rating of 94V-0, and operates b/w -55°C to +85°C temperatures.
74441-0001
Molex 74441-0001 is a telecom/datacom connector with 0.031" mating contact pitch, suitable for board mounting in commercial applications. Features include brass contacts, matte tin finish, and glass-filled polyethylene insulator material. Ideal for right-angle mounting with staggered PCB contact pattern.
5520258-3
TE Connectivity 5520258-3 is a Telecom & Datacom Connector with 0.635" body length, 0.655" width, and 0.65" depth. It has an insulation resistance of 500M ohm and uses POLYBUTYLENE TEREPHTHALATE insulator material. Ideal for telecom applications, it features a split board lock mounting option and solder termination type.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved