Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TE Connectivity 1735284-2 is a Telecom & Datacom Connector with POLYETHYLENE insulator, 30u plating thickness, and 22 contacts. It operates b/w -40 to 85°C, suitable for telecom applications requiring a rated current of 1.5A. The connector features a polarized key, UL flammability rating of 94V-0, and surface mount termination.
Median Price
$3.540
Lifecycle Status
Suppliers In-Stock
14
In-Stock Inventory
1k+
Farnell
1+ parts
$2.890
100+ parts
$2.030
1k+ parts
$1.660
10k+ parts
-
TE Connectivity
$3.400
$3.010
$2.750
Mouser Electronics
$3.680
$2.470
$2.370
$2.200
DigiKey
$4.080
$2.947
$2.505
$2.348
Newark
$2.990
$2.740
$2.680
Element14
$5.040
$4.430
$3.670
$3.290
Master Electronics
$1.880
$1.750
Verical
$2.212
Nova Conductors
$2.117
Digiode
$2.746
VNN
Vyrian
Electro Sonic
$2.250
$1.980
$1.720
IBS Electronics
$2.647
$2.478
$2.140
Aranea Global
$2.075
$1.992
Continental Prestige Electronics
Argo Parts USA
Corphita
$2.601
Kepictronics
Authorized Procurement Solutions
Perfect Parts
The compact size of the body depth allows for minimal space usage on the circuit board, ideal for maximizing board space in tight electronic assemblies.
Polyethylene is known for its excellent electrical insulation properties, ensuring reliable connections and minimizing signal interference in telecom and datacom applications.
With a high maximum operating temperature, this connector can withstand elevated temperatures, making it suitable for various environmental conditions and ensuring optimal performance.
The low minimum operating temperature ensures that the connector remains functional even in extremely cold conditions, increasing the versatility of the product.
The plated contacts with a thickness of 30u inch offer enhanced durability and corrosion resistance, prolonging the connector's lifespan and maintaining signal integrity.
With a high number of contacts, this connector can accommodate multiple signal lines, making it suitable for complex telecom and datacom applications that require numerous connections.
The board mounting option with a peg design ensures secure attachment to the circuit board, providing stability during operation and simplifying the assembly process.
Surface mount termination simplifies the installation process and allows for automated assembly, reducing labor costs and increasing production efficiency.
Telecom & Datacom Connectors 1735284-2 attributes and parameters. Explore more Telecom & Datacom Connectors devices from TE Connectivity
Board Mounting Option:
Body Depth:
Body or Shell Style:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Pattern:
Contact Style:
DIN Conformance:
EMI Shielded:
Empty Shell:
Filter Feature:
IEC Conformity:
Insulator Color:
Insulator Material:
MIL Conformity:
Mains Connector Rating:
Mixed Contacts:
Mounting Option-1:
Mounting Style:
Mounting Type:
No. of Connectors:
No. of PCB Rows:
No. of Ports:
No. of Rows Loaded:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
PCB Contact Pattern:
Panel Mount:
Plating Thickness (inch):
Polarization Key:
Rated Current - Signal:
Reference Standard:
Shell Material:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
UL Flammability Code:
1735284-2 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
TE Connectivity is a global leader in the design and production of innovative connectors and sensors for multiple industries, such as automotive, industrial equipment, data communication systems, aerospace, defense, medical, oil and gas, consumer electronics and energy. It is an American-Swiss domiciled firm that has been providing high-quality products to its customers since 1907.
CEO
Terrence R. Curtin
Executive VP, CFO
Heath A. Mitts
Senior VP, Principal Accounting Officer
Robert J. Ott
2N2222A
Ksl Microdevices
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
261
Mercury Systems
Other Interface ICs; Temperature Grade: MILITARY; Terminal Form: FLAT; No. of Terminals: 14; Package Code: DFP; Package Shape: SQUARE;
1554216004
Molex
WIRE AND CABLE;
1N4148WT
Diodes Incorporated
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Tak Cheong Electronics Holdings
CRCW06031K00FKEAHP
Vishay Intertechnology
Vishay Intertechnology's CRCW06031K00FKEAHP is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.33 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance and operating voltage of 75 V.
North American Philips Discrete Products Div
1N4148
Good-ark Electronics
RECTIFIER DIODE; Surface Mount: NO; No. of Elements: 1; Maximum Non Repetitive Peak Forward Current: .5 A; Maximum Forward Voltage (VF): 1 V; No. of Phases: 1;
BAV99
Taiwan Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
SS14
Taitron Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Panjit International
2N7002
Infineon Technologies
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Transistor Element Material: SILICON; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
Yangzhou Yangjie Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; No. of Elements: 1; Terminal Form: GULL WING; Maximum Drain Current (ID): .34 A;
STM32H753IIT6
STMicroelectronics
STM32H753IIT6 by STMicroelectronics is a 32-bit microcontroller with 176 terminals, operating at up to 48 MHz. It features 20-Ch 16-Bit ADCs and 2-Ch 12-Bit DACs, suitable for industrial applications requiring high-speed data processing and connectivity via CAN, ETHERNET, USB, and more.
Weitron Technology
RECTIFIER DIODE; Surface Mount: YES; Maximum Operating Temperature: 150 Cel; Maximum Output Current: .215 A; JESD-609 Code: e0; Maximum Forward Voltage (VF): .715 V;
CRCW080510K0FKEA
Vishay Intertechnology's CRCW080510K0FKEA is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 reference standard compliance and -55 to 155 °C operating temperature range.
LM317BD2TG
Onsemi
LM317BD2TG by Onsemi is an adjustable positive single output standard regulator with a max output current of 1.5A and a max load regulation of 5.8%. Operating temperature ranges from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact designs.
Formosa Microsemi
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Maximum Drain Current (Abs) (ID): .115 A;
ULN2003ADR
Texas Instruments
ULN2003ADR by Texas Instruments is a NPN BJT with 7 elements, max IC of 0.5A, and VCEsat of 1.6V. Ideal for switching applications in small outline packages with Gull Wing terminals.
Temic Semiconductors
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
USB-B-S-F-B-TH-FR
Samtec
Samtec USB-B-S-F-B-TH-FR is a USB connector with 4 contacts, POLYBUTYLENE TEREPHTHALATE insulator, and NICKEL shell finish. It has a PCB contact row spacing of 2.5mm and operates b/w -50°C to 85°C. Ideal for telecom/datacom applications due to its durability of 1500 cycles and right-angle mounting style with retention clips.
HFJ11-1G01E-L12RL
Halo Electronics
HFJ11-1G01E-L12RL by Halo Electronics is a Telecom & Datacom Connector with 8 contacts, gold finish, and polarized housing. It has a 0.625" body length, 0.537" width, and 0.85" depth. Ideal for board and panel mounting in telecom applications due to its right angle mounting style and solder termination type.
RJHSE-3380
Amphenol
Amphenol RJHSE-3380 is a Telecom & Datacom Connector with 8 contacts, 0.65"x.535"x.625" dimensions, and POLYETHYLENE insulator. It has MATTE TIN finish, -55 to 85°C operating range, and UL 94V-0 flammability rating. Ideal for board or panel mounting in telecom applications requiring reliable female connectors with SOLDER termination.
6-555177-3
TE Connectivity's 6-555177-3 is a POLYCARBONATE TELECOM AND DATACOM CONNECTOR with 6 contacts for CABLE mounting. It features a MALE PLUG body style, ideal for telecom and datacom applications.
47491-0001
Molex 47491-0001 USB connector features gold termination, LCP insulator, and 1A signal current. Ideal for telecom/datacom applications with 5 contacts, right-angle mounting, and 10000 cycle durability. Operating temp range -40 to 85°C makes it suitable for commercial use.
GSB316441CEU
Amphenol GSB316441CEU is a USB connector with 9 contacts, made of stainless steel shell and polyethylene insulator. It has a dielectric voltage of 1000VAC, operating temperature range from -20 to 60°C, and durability of 1500 cycles. Ideal for telecom & datacom applications requiring a right-angle mounting on boards.
1050171001
Molex 1050171001 USB connector with Liquid Crystal Polymer insulator, rated at 1.8A signal current and 5 contacts. Ideal for telecom/datacom applications, operating b/w -30°C to 85°C with durability of 10k cycles.
47151-0001
Molex 47151-0001 is a telecom & datacom connector with 19 contacts, TIN BISMUTH finish, and POLYPHENYLENE insulator. It is a surface mount type connector for board mounting applications in telecom and datacom systems.
91483-041
Fci
91483-041 by Fci is a Telecom & Datacom Connector with 0.3" body width and 1.291" depth. Featuring POLYAMIDE insulator, TIN shell finish, and 8 contacts for 3A signal current, it's ideal for telecom and datacom applications requiring crimp termination on cables.
2027180100
The Molex 2027180100 is a Telecom & Datacom Connector with 76 contacts, GLASS FILLED POLYETHYLENE insulator, and UL 94V-0 flammability rating. It is used for board and panel mounting in applications requiring surface mount termination, featuring female contact gender and right angle mounting style.
ARF6-16-S-D-A-K-TR
The Samtec ARF6-16-S-D-A-K-TR is a telecom & datacom connector with 16 contacts, featuring matte tin over nickel finish. With liquid crystal polymer insulator and copper alloy shell, it has a terminal pitch of 0.635mm and operates b/w -40 to 125°C. Ideal for surface mount applications in telecommunications and data communication systems.
5555153-1
Tyco Electronics Amp
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; PCB Contact Pattern: STAGGERED; Contact Material: PHOSPHOR BRONZE; JESD-609 Code: e3;
5-520424-3
TE Connectivity 5-520424-3 is a Telecom & Datacom Connector with 0.05" mating contact pitch, GLASS FILLED POLYCARBONATE insulator, and 500000000 ohm insulation resistance. Ideal for telecom applications, it features a smoke-gray insulator color, male contact gender, and 1.5A signal current rating.
SS-6488S-A-NF-50
Bel Fuse
Bel Fuse SS-6488S-A-NF-50 is a Telecom & Datacom Connector with POLYETHYLENE insulator, 50u plating thickness, and COPPER ALLOY shell. It has 8 contacts in a polarized housing for PCB mounting at 2.54mm pitch. Ideal for commercial applications requiring reliable right-angle board connections.
5173279-3
TE Connectivity 5173279-3 is a Telecom & Datacom Connector with 50 contacts, 1A signal rating, and 0.05" mating contact pitch. Ideal for board mounting applications in telecom and datacom systems due to its high insulation resistance of 500MOhm and operating temperature range from -55°C to 105°C.
5-2337992-5
TE Connectivity 5-2337992-5 is a telecom & datacom connector with EMI shielding, liquid crystal polymer insulator, and nickel-plated brass shell. It has 8 contacts, operates b/w -40°C to 85°C, and mounts on a board lock for right-angle installation.
12401899E412A
Amphenol Communications Solutions
The Amphenol Communications Solutions 12401899E412A is a USB connector with 24 contacts, rated for 5A signal current. It features a dielectric voltage of 100VAC and insulation resistance of 100M ohm, suitable for telecom and datacom applications. With a waterproof option and stainless steel shell material, it offers durability with 10k cycles.
GSB3211311WEU
GSB3211311WEU by Amphenol is a USB connector with 9 contacts, featuring matte tin termination finish. It has a body length of 0.472", width of 0.507", and depth of 0.722". Ideal for telecom/datacom applications, it offers high insulation resistance (100M ohm) and operates b/w -55°C to 85°C.
85513-5113
The Molex 85513-5113 is a telecom and datacom connector with 8 contacts. It features a surface mount termination and a polyethylene insulator material. This jack-style connector is commonly used in board-mounted applications.
5622-1200-ML
3m Electronic Products Division
5622-1200-ML by 3M is a telecom & datacom connector with body dimensions of 1.593" x 0.266" x 0.507". It features insulation resistance of 1G ohm, dielectric voltage withstand of 500VAC, and gold-nickel mating contacts. Ideal for commercial applications requiring reliable male connectors with surface mount termination in black insulator color.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
1735284-3
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; No. of Connectors: ONE; Mating Contact Pitch (inch): 0.05; Reference Standard: UL;
1735284-1
TE Connectivity's 1735284-1 is a telecom and datacom connector with a body depth of 0.26 inch. It has a max operating temperature of 85°C and min operating temperature of -40°C. This surface mount receptacle is commonly used in board mounting applications for telecommunications and data communication systems.
1735539-3
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; No. of Connectors: ONE; No. of PCB Rows: 1; DIN Conformance: NO;
1735574-3
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; No. of Connectors: ONE; EMI Shielded: NO; Mounting Type: BOARD; Mixed Contacts: NO;
1735452-1
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; No. of Connectors: ONE; Insulator Color: BLACK; MIL Conformity: NO; Panel Mount: NO;
1735452-4
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; No. of Connectors: ONE; Insulator Color: BLACK; Mating Contact Finish: NOT SPECIFIED; Mixed Contacts: NO;
1735574-2
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; No. of Connectors: ONE; Polarization Key: POLARIZED; Plating Thickness (inch): 15u; Empty Shell: YES;
1735871-1
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; No. of Connectors: ONE; Insulator Material: POLYETHYLENE; Mating Contact Finish: NOT SPECIFIED; No. of Ports: 1;
1735183-1
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; No. of Connectors: ONE; Empty Shell: YES; No. of Rows Loaded: 1; Minimum Operating Temperature: -40 Cel;
1735284-4
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; No. of Connectors: ONE; No. of Rows Loaded: 1; Board Mounting Option: PEG;
1735078-1
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; Mating Contact Pitch (inch): 0.05;
1735452-3
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; No. of Connectors: ONE; Mating Contact Finish: NOT SPECIFIED; MIL Conformity: NO; EMI Shielded: NO;
1735452-5
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; No. of Connectors: ONE; Rated Current - Signal: 1.5 A; Plating Thickness (inch): 15u; Mounting Type: BOARD;
1735284-6
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; No. of Connectors: ONE; No. of Rows Loaded: 1; Body Depth: .26 inch; Contact Material: NOT SPECIFIED;
1735418-1
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; No. of Connectors: ONE; UL Flammability Code: 94V-0; Termination Type: SURFACE MOUNT; Mounting Type: BOARD;
1735418-3
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; No. of Connectors: ONE; DIN Conformance: NO; Mounting Style: RIGHT ANGLE; Board Mounting Option: BOARD LOCK;
1735610-1
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; No. of Connectors: ONE; Mounting Style: RIGHT ANGLE; Mating Contact Finish: NOT SPECIFIED; Plating Thickness (inch): 30u;
1735783-3
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; No. of Connectors: ONE; Contact Style: TELCOM, MODULAR; Board Mounting Option: PEG; Terminal Pitch (mm): 1.27;
1735869-1
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Connectors: ONE; Filter Feature: NO; Insulator Material: POLYETHYLENE;
1735284-5
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; No. of Connectors: ONE; Contact Material: NOT SPECIFIED; MIL Conformity: NO; Body or Shell Style: RECEPTACLE;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved