Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TE Connectivity's 1735871-1 is a telecom & datacom connector with polyethylene insulator, board mounting option PEG, and rated current of 1.5A. It has 29 contacts, operates b/w -40 to 85°C, and is UL certified for flammability. Ideal for surface mount applications in telecommunications and data communication systems.
Median Price
$3.185
Lifecycle Status
Suppliers In-Stock
11
In-Stock Inventory
1k+
TE Connectivity
1+ parts
$3.800
100+ parts
$3.360
1k+ parts
$3.070
10k+ parts
-
DigiKey
$3.900
$2.819
Chip1Stop
$2.570
Verical
$2.310
Nova Conductors
$2.930
Digiode
$3.610
Bristol Electronics
$3.958
$1.860
$1.702
Vyrian
VNN
Dan-Mar Components
Rapid Electronics
Continental Prestige Electronics
$2.871
Argo Parts USA
Corphita
$3.420
AZTECH Wire
$5.360
$5.150
$5.040
$4.940
Kepictronics
Netroflash
$2.784
$2.725
Assy Fe
Compact size allows for efficient use of space in telecom and datacom applications.
Provides excellent insulation properties for reliable signal transmission.
Securely mounts to circuit boards for stable connectivity.
Can withstand high operating temperatures, ensuring reliable performance in various environments.
Capable of functioning in low temperature conditions without compromising signal integrity.
Provides a protective coating for enhanced durability and longevity.
Suitable for carrying signal currents up to 1.5 A, meeting the power requirements of telecom and datacom systems.
Standard black color for easy identification and compatibility with various equipment.
Offers a high number of contacts for multiple signal connections, allowing for versatile use.
Designed for easy and secure mounting on circuit boards, ensuring stability during operation.
Facilitates easy and efficient surface mounting for quick installation and connection.
Straight mounting style for straightforward installation and alignment in telecom and datacom setups.
Telecom & Datacom Connectors 1735871-1 attributes and parameters. Explore more Telecom & Datacom Connectors devices from TE Connectivity
Board Mounting Option:
Body Depth:
Body or Shell Style:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Material:
DIN Conformance:
EMI Shielded:
Empty Shell:
Filter Feature:
IEC Conformity:
Insulator Color:
Insulator Material:
MIL Conformity:
Mains Connector Rating:
Mixed Contacts:
Mounting Style:
Mounting Type:
No. of Connectors:
No. of Ports:
No. of Rows Loaded:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
Panel Mount:
Plating Thickness (inch):
Rated Current - Signal:
Reference Standard:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
UL Flammability Code:
1735871-1 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
TE Connectivity is a global leader in the design and production of innovative connectors and sensors for multiple industries, such as automotive, industrial equipment, data communication systems, aerospace, defense, medical, oil and gas, consumer electronics and energy. It is an American-Swiss domiciled firm that has been providing high-quality products to its customers since 1907.
CEO
Terrence R. Curtin
Executive VP, CFO
Heath A. Mitts
Senior VP, Principal Accounting Officer
Robert J. Ott
USB2514BI-AEZG
Microchip Technology
USB2514BI-AEZG by Microchip is a BUS CONTROLLER IC with 36 terminals, operating at 3.3V, supporting I2C, SMBUS, and USB buses. It has a clock frequency of up to 24MHz and can withstand industrial temperatures from -40°C to 85°C. This chip carrier package is surface mountable and suitable for various applications requiring USB connectivity.
SMBJ18CA
Lite-on Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Panjit International
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Gulf Semiconductor
Standard Microsystems
BUS CONTROLLER, UNIVERSAL SERIAL BUS; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 36; Package Code: HVQCCN; Package Shape: SQUARE;
BAV99
Formosa Microsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
New Jersey Semiconductor Products
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Package Shape: ROUND;
Onsemi
Mde Semiconductor
M39029/56351
Esterline Technologies
CONNECTOR ACCESSORY; IEC Conformity: NO; Contact Gender: FEMALE; DIN Conformity: NO; MIL-Connector Accessory Name: CONTACT; Tool Settings: M22520/2-10;
Unitrode
LM317T
Analog Devices
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; No. of Functions: 1; Package Body Material: PLASTIC/EPOXY; Surface Mount: NO;
LM2931AZ-5.0RAG
LM2931AZ-5.0RAG by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V nominal output voltage, 0.1A max output current, and 0.6V max dropout voltage. Ideal for applications requiring stable voltage regulation in temperature-sensitive environments up to 150°C.
SBAV99LT1G
SBAV99LT1G by Onsemi is a rectifier diode with a max repetitive peak reverse voltage of 100V. It has a small outline package style and a fast max reverse recovery time of 0.006 us. It is commonly used in applications requiring low power dissipation and high operating temperatures.
Diotec Semiconductor Ag
2N7002
Rectron
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Operating Mode: ENHANCEMENT MODE; Maximum Operating Temperature: 150 Cel; Terminal Form: GULL WING;
FDC5614P
FDC5614P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 20A Max IDM and 0.105 ohm RDS(ON), operating in ENHANCEMENT MODE at -55 to 150 °C. This SMALL OUTLINE transistor has a built-in diode, GULL WING terminals, and METAL-OXIDE SEMICONDUCTOR technology.
STM32H743BIT6
STMicroelectronics
STM32H743BIT6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, 208 terminals, and 1085440 bytes of RAM. It features 2 DAC channels, 32 ADC channels, and operates at a max clock frequency of 48 MHz. Ideal for industrial applications requiring high-speed processing and extensive peripheral connectivity.
LL4148
Daco Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Changzhou Galaxy Century Microelectronics
MUC-20PFFR-JS8A02
Amphenol
USB CONNECTOR;
1734372-1
TE Connectivity's 1734372-1 USB Connector features a 0.472"x.177" body with POLYETHYLENE insulator, NICKEL finish, and UL 94V-0 flammability rating. With 4 contacts, it supports 1A signal current and offers durability of 1500 cycles. Ideal for telecom/datacom applications, this connector is polarized and has a locking mounting option for secure cable termination.
1734366-2
TE Connectivity's 1734366-2 is a USB connector with a body length of 0.571 inch, body width of 0.28 inch, and body depth of 0.591 inch. It is used in telecom and datacom applications, offering a rated current of 1A and durability of 1500 cycles.
6605814-6
Bel Fuse
TELECOM AND DATACOM CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Termination Type: SOLDER; Body Length: .725 inch; Minimum Operating Temperature: 0 Cel;
MRJ-5381-01
Amphenol MRJ-5381-01 is a Telecom & Datacom Connector with 8 contacts, gold-plated phosphor bronze material, and 500M ohm insulation resistance. It has a right-angle mounting style, POLYETHYLENE insulator, and operates b/w -40 to 105°C. Ideal for telecom and datacom applications due to its durability of 2500 cycles and UL flammability rating of 94V-0.
897-43-004-90-000000
Mill-max Mfg
897-43-004-90-000000 by Mill-max Mfg is a USB connector with 0.474" body length, 1000000000 ohm insulation resistance, and 750VAC dielectric voltage. Ideal for telecom/datacom applications, it features matte tin over nickel termination finish and polyethylene insulator material.
SS-52400-003
Bel Fuse SS-52400-003 is a Telecom & Datacom Connector with 24 contacts, rated at 5A signal current. It features a dielectric voltage of 100VAC, insulation resistance of 100MΩ, and operates b/w -40°C to 105°C. Ideal for board mounting applications in telecommunications and data communication systems.
48037-1000
Molex
The Molex 48037-1000 USB connector features a body length of 0.472", insulation resistance of 1G ohm, and dielectric voltage of 500VAC. Ideal for telecom applications, this connector has a durable steel shell, surface mount termination, and is rated for 1500 cycles.
1656725
Phoenix Contact
The Phoenix Contact 1656725 is a Telecom & Datacom Connector with GOLD OVER NICKEL finish. Made of POLYCARBONATE, it has 8 contacts and UL 94V-0 flammability rating. Ideal for cable mounting, this IDC connector is a male plug suitable for telecom and datacom applications.
7499011222A
Wuerth Elektronik & Kg
TELECOM AND DATACOM CONNECTOR; Contact Material: NOT SPECIFIED; Mating Contact Finish: TIN OVER NICKEL; JESD-609 Code: e3; Termination Contact Finish: TIN OVER NICKEL;
91483-091
Fci
The Fci 91483-091 is a telecom and datacom connector with a body width of 0.3 inch and depth of 1.291 inch. It has a polyamide insulator material and features a polarized housing for secure connections. This connector is suitable for applications requiring 8 contacts, such as cable mounting in telecommunications and data communication systems.
6116075-1
TE Connectivity 6116075-1 is a telecom & datacom connector with EMI shielding, UL94V-0 flammability rating, and 8 contacts. It has a right-angle mounting style, solder termination type, and operates b/w -40°C to 85°C. Ideal for commercial applications requiring durable connectors with polarized housing and locking mounting option.
MUSB-05-S-B-SM-A
Samtec
Samtec's MUSB-05-S-B-SM-A is a USB connector with Matte Tin finish, Liquid Crystal Polymer insulator, and 30u plating thickness. Ideal for telecom/datacom applications, it offers 5 contacts, operates b/w -50 to 85°C, and has a durability of 1500 cycles.
651005136421
651005136421 by Wurth Elektronik is a USB connector with a body length of 0.303", body width of 0.156", and body depth of 0.362". It is commonly used in telecom and datacom applications, offering a rated current of 1A and insulation resistance of 1GΩ.
PCR-E20FS+
Honda Tsushin Kogyo
PCR-E20FS+ by Honda Tsushin Kogyo is a 20-contact telecom/datacom connector with 0.05" mating pitch, 1000000000 ohm insulation resistance, and 500VAC dielectric voltage. It features GLASS FILLED POLYBUTYLENE TEREPHTHALATE insulator material and NICKEL shell finish. Ideal for commercial applications requiring a reliable female contact style with solder termination on a rectangular pattern.
RJHSE-5384-04
Amphenol Communications Solutions
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Contact Material: NOT SPECIFIED; PCB Contact Pattern: STAGGERED;
RJHSE-5380-04
Amphenol RJHSE-5380-04 is a 4-port telecom & datacom connector with 32 contacts. Features include matte tin termination, phosphor bronze contact material, and polyethylene insulator. Ideal for board mounting with right-angle style, suitable for commercial applications requiring UL standard compliance.
MUSB-E151-34
MUSB-E151-34 by Amphenol is a USB connector with gold-plated contacts, suitable for telecom/datacom applications. It features a dielectric voltage of 100VAC, insulation resistance of 100M ohm, and operates b/w -40 to 105°C. With a compact design and high reliability, it offers a total of 5 contacts in a right-angle receptacle style for board or panel mounting.
2301994-7
TE Connectivity 2301994-7 is a Telecom & Datacom Connector with EMI shielding. It features Liquid Crystal Polymer insulator, board lock mounting option, and brass shell material. Ideal for telecom applications due to its right angle mounting style and female contact gender.
2012670005
Molex 2012670005 USB connector features POLYETHYLENE insulator, 24 contacts, and 105°C max operating temp. Ideal for telecom/datacom applications with BOARD MOUNTING FLANGE option and FEMALE contact gender. Designed for durability with STAINLESS STEEL shell material and rated at 5A signal current.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
1735284-2
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Connectors: ONE; Polarization Key: POLARIZED; Body Depth: .32 inch;
1735284-3
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; No. of Connectors: ONE; Mating Contact Pitch (inch): 0.05; Reference Standard: UL;
1735284-1
TE Connectivity's 1735284-1 is a telecom and datacom connector with a body depth of 0.26 inch. It has a max operating temperature of 85°C and min operating temperature of -40°C. This surface mount receptacle is commonly used in board mounting applications for telecommunications and data communication systems.
1735539-3
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; No. of Connectors: ONE; No. of PCB Rows: 1; DIN Conformance: NO;
1735574-3
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; No. of Connectors: ONE; EMI Shielded: NO; Mounting Type: BOARD; Mixed Contacts: NO;
1735452-1
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; No. of Connectors: ONE; Insulator Color: BLACK; MIL Conformity: NO; Panel Mount: NO;
1735452-4
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; No. of Connectors: ONE; Insulator Color: BLACK; Mating Contact Finish: NOT SPECIFIED; Mixed Contacts: NO;
1735574-2
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; No. of Connectors: ONE; Polarization Key: POLARIZED; Plating Thickness (inch): 15u; Empty Shell: YES;
1735183-1
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; No. of Connectors: ONE; Empty Shell: YES; No. of Rows Loaded: 1; Minimum Operating Temperature: -40 Cel;
1735284-4
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; No. of Connectors: ONE; No. of Rows Loaded: 1; Board Mounting Option: PEG;
1735078-1
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; Mating Contact Pitch (inch): 0.05;
1735452-3
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; No. of Connectors: ONE; Mating Contact Finish: NOT SPECIFIED; MIL Conformity: NO; EMI Shielded: NO;
1735452-5
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; No. of Connectors: ONE; Rated Current - Signal: 1.5 A; Plating Thickness (inch): 15u; Mounting Type: BOARD;
1735234-1
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; No. of Connectors: ONE; Panel Mount: NO; Insulator Material: POLYETHYLENE; Mixed Contacts: NO;
1735368-1
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; No. of Connectors: ONE; Board Mounting Option: BOARD LOCK; Termination Type: PRESS FIT; Maximum Operating Temperature (Cel): 85;
1735418-1
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; No. of Connectors: ONE; UL Flammability Code: 94V-0; Termination Type: SURFACE MOUNT; Mounting Type: BOARD;
1735610-1
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; No. of Connectors: ONE; Mounting Style: RIGHT ANGLE; Mating Contact Finish: NOT SPECIFIED; Plating Thickness (inch): 30u;
1735783-3
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; No. of Connectors: ONE; Contact Style: TELCOM, MODULAR; Board Mounting Option: PEG; Terminal Pitch (mm): 1.27;
1735869-1
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Connectors: ONE; Filter Feature: NO; Insulator Material: POLYETHYLENE;
1735870-1
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; No. of Connectors: ONE; UL Flammability Code: 94V-0; Panel Mount: NO; Reference Standard: UL;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved