Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
The Molex 50-57-9415 is a board connector with 15 contacts, 0.1" pitch, and insulation resistance of 10^10 ohm. It has a temperature range of -40 to 105°C and uses crimp termination for wire sizes b/w 24-22 AWG. Ideal for commercial applications requiring reliable signal transmission in polarized housings.
Median Price
$0.462
Lifecycle Status
Suppliers In-Stock
35
In-Stock Inventory
1k+
Arrow
1+ parts
$0.145
100+ parts
$0.143
1k+ parts
-
10k+ parts
Interstate Connecting
$0.447
$0.375
$0.354
Misumi USA
$0.760
Mouser Electronics
$0.810
$0.482
$0.425
$0.398
DigiKey
$0.850
$0.589
$0.472
Element14
$61.850
Master Electronics
$0.415
$0.340
Newark
$0.582
TTI
$0.365
Verical
$0.410
PEI Genesis
NEP Electronics
Chip1Stop
$0.337
Powell Electronics
$0.413
$0.389
Farnell
$0.605
Heilind Electronics
PSC Electronics
Digiode
$0.138
Freelance Electronics
$0.191
$0.201
$0.189
Nova Conductors
$0.446
TestEquity
$0.450
Component Electronics Inc.
$0.770
$0.580
$0.500
TME
Vyrian
Q Components
IBS Electronics
$0.463
$0.379
VNN
SPM Sales
A&K Electronics
Rotakorn
Connector Distribution Corp
Right Parts Inc.
FDH Electronics
First Choice Components Inc.
Bristol Electronics
Semicontronic
$0.123
$0.120
$0.119
Corphita
$0.130
Bastille Electronics
$0.424
$0.403
$0.397
Argo Parts USA
$0.433
Continental Prestige Electronics
$1.100
$0.714
$0.615
Andel Nordic
$1.400
$0.980
Aztec Data Supply Inc.
$2.403
Assy Fe
Perfect Parts
EMSNET (Excess)
Standard Data Resources (Excess)
The small mating contact pitch allows for a compact and efficient connection with other compatible components.
The ample body length provides sufficient space for secure and stable connections.
High insulation resistance ensures minimal signal loss and reliable performance.
The slim body width makes it suitable for applications with limited space constraints.
The moderate body depth offers a balance between compact design and ease of handling.
The use of glass filled polyester as insulator material provides durability and resistance to heat.
The high maximum operating temperature ensures stability and performance under varying environmental conditions.
The preassembled contact design simplifies installation and ensures consistent connectivity.
The low minimum operating temperature allows for reliable performance in cold environments.
The board connector type is suitable for connecting to printed circuit boards, making it versatile for various applications.
The UL 94V-0 flammability code indicates high fire resistance, ensuring safety in case of emergencies.
The polarization key ensures proper alignment during connection, preventing errors and damage.
The high rated current allows for efficient transmission of signals without risk of overload.
The sleek black insulator color adds a professional look to the product.
Compliance with UL and CSA standards ensures quality and safety in the product.
The ample number of contacts allows for multiple connections, making it suitable for complex systems.
Having one connector simplifies installation and maintenance tasks.
The compatibility with 24 AWG wire ensures flexibility in usage with different wire sizes.
The cable mounting type offers easy and secure attachment to cables for convenient use.
The compatibility with 22 AWG wire allows for versatility in connecting to different wire sizes.
The crimp termination type provides a reliable and secure connection between the connector and wires.
The female contact gender is commonly used for accommodating male connectors, enhancing compatibility.
The low contact resistance ensures minimal energy loss and efficient signal transmission.
The plug style offers ease of insertion and removal, making it user-friendly.
The square pin socket contact style ensures a secure and stable connection.
The locking mounting option provides added security and stability once the connector is in place.
The latch mounting option offers convenience and ease of use in securing the connector.
The rectangular contact pattern allows for a more organized and efficient arrangement of contacts.
The commercial reliability ensures consistent performance and durability for commercial applications.
Headers & Edge Type Connectors 50-57-9415 attributes and parameters. Explore more Headers & Edge Type Connectors devices from Molex
Additional Features:
Body Width:
Body Depth:
Body Length:
Body or Shell Style:
Connector Type:
Contact Design:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Pattern:
Contact Resistance:
Contact Style:
DIN Conformance:
Filter Feature:
IEC Conformity:
Insulation Resistance:
Insulator Color:
Insulator Material:
MIL Conformity:
Mating Contact Pitch (inch):
Mating Info.:
Mixed Contacts:
Mounting Option-1:
Mounting Option-2:
Mounting Type:
No. of Connectors:
No. of Rows Loaded:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
Polarization Key:
Rated Current - Signal:
Reference Standard:
Reliability:
Sub-Category:
Termination Type:
Total No. of Contacts:
UL Flammability Code:
Maximum Wire Size:
Minimum Wire Size:
50-57-9415 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.40
SB
PCN Assembly/Origin - Multiple Devices Location 20/Sep/2019
PCN Packaging - Mult Devs Packaging 03/Feb/2022
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
BSS138LT3G
Onsemi
BSS138LT3G by Onsemi is a N-CHANNEL FET with a min DS breakdown voltage of 50V. It is used for switching applications and has a max drain current of 0.2A and max drain-source on resistance of 3.5 ohm.
SMBJ18CA
Leshan Radio
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
RC0603FR-071KL
Yageo
Yageo's RC0603FR-071KL is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in electronics, it operates b/w -55 to 155 °C with a temperature coefficient of 100 ppm/°C.
1N4148WS
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Cheng-yi Electronic
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
STM32H743ZIT6
STMicroelectronics
STM32H743ZIT6 by STMicroelectronics is a 32-bit microcontroller with integrated cache and a max supply voltage of 3.6V. It is commonly used in industrial applications, offering features such as 21 timers, CAN and USB connectivity, and low power mode.
Diotec Semiconductor Ag
0460-202-16141
TE Connectivity
TE Connectivity's 0460-202-16141 contact features a crimp terminal type, machined contact design, and rated AC voltage of 1500V. With a wire gauge range of 20-16 AWG, it is ideal for applications requiring a male round pin-socket contact style in assembly products.
SS14
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Surface Mount: YES; Technology: SCHOTTKY; No. of Phases: 1; Config: SINGLE; Maximum Operating Temperature: 125 Cel;
Hitano Enterprise
DS18B20
Maxim Integrated
DS18B20 by Maxim Integrated is a 12-bit digital temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Commonly used in applications requiring precise temperature monitoring like HVAC systems and industrial automation.
2N2222A
ROHM
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .6 A;
LM7805CT
Integrated Circuit Technology
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Terminal Position: SINGLE; Operating Temperature (TJ-Min): 0 Cel;
BAV99
SPC TECHNOLOGY/ MULTICOMP
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WT
Surge Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138BK,215
NXP Semiconductors
NXP Semiconductors' BSS138BK,215 is a N-CHANNEL FET with 0.36A max drain current and 0.42W power dissipation. Ideal for applications requiring single configuration and surface mount technology, such as enhancement mode operation in temperatures up to 150°C.
Good-ark Electronics
RECTIFIER DIODE; Surface Mount: NO; No. of Elements: 1; Maximum Non Repetitive Peak Forward Current: .5 A; Maximum Forward Voltage (VF): 1 V; No. of Phases: 1;
2N7002
Calogic
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Peak Reflow Temperature (C): NOT SPECIFIED; Terminal Position: DUAL;
Solid State Devices
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Secos
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .3 W; Maximum Drain Current (ID): .115 A; Maximum Drain-Source On Resistance: 7.5 ohm;
DF11-4DS-2C
Hirose Electric
The Hirose Electric DF11-4DS-2C is a 2-row board connector with 4 contacts, featuring a mating contact pitch of 0.079", insulation resistance of 1Gohm, and dielectric voltage withstand of 650VAC. Ideal for applications requiring a durable socket-style connector with crimp termination, suitable for commercial use in environments ranging from -30 to 85°C.
MTCB2X-XXX-205CS061
BOARD CONNECTOR;
VHR-5N-BK
J S T Mfg
VHR-5N-BK by J S T Mfg is a 5-contact female board connector with a mating contact pitch of 0.156". Featuring POLYAMIDE insulation, it has an operating temperature range of -25 to 85 °C and offers high insulation resistance at 1G ohm. Ideal for commercial applications requiring reliable connections in black housings.
BM04B-SRSS-TB(LF)(SN)
BM04B-SRSS-TB(LF)(SN) by J S T Mfg is a 4-contact board connector with 0.039" pitch, suitable for PCB mounting. Featuring tin over copper finish, it has an insulation resistance of 100M ohm and operates b/w -25 to 85°C. Ideal for applications requiring a male contact gender and UL flammability rating of 94V-0.
QSH-030-01-L-D-A-K
Samtec
The Samtec QSH-030-01-L-D-A-K is a 60-contact board stacking connector with a mating contact pitch of 0.02", insulation resistance of 5G ohm, and dielectric voltage rating of 375VAC. It features a liquid crystal polymer insulator, gold over nickel contact finish, and operates b/w -55 to 125°C. Ideal for commercial applications requiring high durability and reliability in PCB connections.
DM3AT-SF-PEJM5(40)
The Hirose Electric DM3AT-SF-PEJM5(40) is a PCB connector with 0.043" mating contact pitch, GOLD finish, and 1000000000 ohm insulation resistance. Ideal for commercial applications, it features a liquid crystal polymer insulator, operates b/w -25 to 85 °C, and offers durability of 10000 cycles.
35362-1250
Molex
Molex 35362-1250 is a board connector with 12 contacts, 0.079" pitch, and matte tin finish. It has a rectangular PCB contact pattern and is used in commercial applications requiring reliable connections on boards with UL flammability rating of 94V-0.
S3B-XH-A
S3B-XH-A by J S T Mfg is a 3-contact board connector with brass contacts and tin over copper finish. It operates b/w -25°C to 85°C, UL94V-0 rated for flammability. Ideal for right-angle mounting in applications requiring reliable soldered connections on boards.
GHR-04V-S
GHR-04V-S by J S T Mfg is a 4-contact BOARD CONNECTOR with 0.049" pitch, POLYBUTYLENE TEREPHTHALATE insulator, and 500VAC dielectric voltage. Ideal for CABLE mounting applications, it has a rated current of 1A and operates b/w -25 to 85°C.
EHR-2
EHR-2 by J S T Mfg is a BOARD CONNECTOR with 0.098" pitch, 3A signal current, and 800VAC dielectric voltage. It has POLYAMIDE66 insulation, operates b/w -25 to 85 °C, and UL94V-0 flammability rating. Ideal for CABLE mounting applications requiring high contact resistance and locking feature.
DT06-08SA-P012
Deutsch
BOARD CONNECTOR; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1500VAC; No. of Connectors: ONE; Mounting Type: CABLE;
SF56S006V4BR2000
Japan Aviation Electronics Industry
PCB CONNECTOR; Option: GENERAL PURPOSE; JESD-609 Code: e4; MIL Conformity: NO; Mating Contact Finish: GOLD OVER NICKEL; DIN Conformance: NO;
TSW-106-17-T-S
Samtec TSW-106-17-T-S is a 6-contact board connector with 0.1" pitch, ideal for commercial applications. Featuring tin contact finish and polybutylene terephthalate insulator, it operates b/w -55°C to 105°C. With a rectangular PCB pattern and solder termination, this male connector offers reliable performance in various electronic devices.
M50-3600542R
Harwin Plc
The Harwin PLC M50-3600542R is a 10-contact female board connector with a mating contact pitch of 0.05", ideal for PCB applications. Featuring tin finish with nickel barrier, it offers high insulation resistance of 1 Gohm and operates b/w -40°C to 105°C. With durability up to 300 cycles, this UL-rated connector is suitable for commercial use in various electronic devices.
TSW-108-17-T-S
TSW-108-17-T-S by Samtec is a 0.1 inch pitch board connector with 8 contacts and a max operating temperature of 105°C. It features a durable design with a mating contact finish of matte tin over nickel, making it suitable for various applications in electronics and PCB assemblies.
53261-0371
Molex 53261-0371 is a board connector with 0.049" pitch, 100000000 ohm insulation resistance, and 250VAC dielectric voltage. Ideal for commercial applications, it features a male blade pin-skt contact style, right-angle mounting, and surface mount termination type.
1-2129458-1
TE Connectivity 1-2129458-1 is a PCB connector with 5 contacts, rated at 25V and 12.5A signal current. Made of polyethylene, it operates b/w -40 to 85°C. Ideal for board mounting applications requiring a right angle jack with solder termination.
50-57-9405
The Molex 50-57-9405 header connector features a mating contact pitch of 0.1", insulation resistance of 10^10 ohm, and dielectric voltage rating of 2200VAC. It is used in board connections with a total of 5 contacts, rated for 3A signal current, and operating temperatures ranging from -40 to +105°C.
B2B-PH-SM4-TB(LF)(SN)(P)
B2B-PH-SM4-TB(LF)(SN)(P) by J S T Mfg is a BOARD CONNECTOR with COPPER ALLOY contacts and TIN finish. Featuring 2 contacts, it has a terminal pitch of 2mm and UL 94V-0 flammability rating. Ideal for surface mount applications in headers & edge type connectors.
1565917-4
TE Connectivity 1565917-4 is a Card Edge Connector with 200 contacts, gold finish, and polyethylene insulator. It has a mating contact pitch of 0.024", suitable for board mounting with right-angle style. Operating temperature ranges from -55 to 85°C, making it ideal for various electronic applications.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
50-57-9404
The Molex 50-57-9404 is a board connector with 0.1" mating contact pitch, suitable for commercial applications. It features a body length of 0.399", insulation resistance of 10^10 ohm, and operating temperature range from -40 to 105°C. Ideal for use in electronics requiring a reliable female plug connector with crimp termination and polarized housing.
50-57-9403
Molex 50-57-9403 is a board connector with 0.1" pitch, suitable for commercial applications. It features a body length of 0.299", insulation resistance of 10^10 ohm, and operating temperature range from -40 to 105°C. Ideal for use in cable mounting scenarios with crimp termination and female contact gender.
50-57-9002
The Molex 50-57-9002 is a board connector with a mating contact pitch of 0.1". Featuring glass-filled polyester insulator, it operates b/w -40 to 105°C. With female SQ pin-skt contacts, it is ideal for commercial applications requiring a reliable rectangular contact pattern.
50-57-9003
The Molex 50-57-9003 is a board connector with a mating contact pitch of 0.1 inch. It has a body width of 0.099 inch and depth of 0.6 inch, making it suitable for various applications in headers & edge type connectors. Its insulator material is glass filled polyester, and it has a total of 3 contacts with female SQ PIN-SKT contact style.
50-57-9004
The Molex 50-57-9004 is a board connector with 0.1" mating contact pitch, 0.099" body width, and 0.6" body depth. It features glass-filled polyester insulator material and UL 94V-0 flammability code. Ideal for commercial applications requiring a reliable 4-contact female connector with crimp termination on cables.
50-57-9005
The Molex 50-57-9005 is a board connector with 0.1" mating contact pitch, 0.099" body width, and 0.6" body depth. It features glass filled polyester insulator material and UL 94V-0 flammability code. Ideal for commercial applications requiring a reliable 5-contact female connector with crimp termination on cable mounting.
50-57-9402
The Molex 50-57-9402 is a board connector with a mating contact pitch of 0.1 inch and a body length of 0.199 inch. It has an insulation resistance of 10^10 ohm and is commonly used in commercial applications requiring a reliable, polarized housing for signal currents up to 3 A.
50-57-9008
The Molex 50-57-9008 is a board connector with 0.1" mating contact pitch, 0.099" body width, and 0.6" body depth. It features glass-filled polyester insulator material and UL 94V-0 flammability code. Ideal for commercial applications requiring an 8-contact female connector with crimp termination on cables.
50-57-9009
The Molex 50-57-9009 is a board connector with 0.1" mating contact pitch, 0.099" body width, and 0.6" body depth. It has 9 female contacts for cable mounting with crimp termination. This UL-certified connector in black is ideal for commercial applications requiring reliable rectangular pin-skirt connections.
50-57-9006
The Molex 50-57-9006 is a board connector with mating contact pitch of 0.1". Featuring glass filled polyester insulator, it has 6 contacts and UL94V-0 flammability rating. Ideal for commercial applications, this plug-style connector offers crimp termination and locking mounting option.
50-57-9010
The Molex 50-57-9010 is a board connector with 10 contacts, 0.1" pitch, and 0.099" body width. It features glass-filled polyester insulator material and is UL94V-0 rated. Ideal for commercial applications requiring a reliable female SQ pin-skt contact style with crimp termination on cable mounting.
50-57-9406
Molex 50-57-9406 is a board connector with 0.1" pitch, suitable for commercial applications. It features a 3A signal current rating, GLASS FILLED POLYESTER insulator, and operates b/w -40 to 105°C. Ideal for cable mounting with crimp termination, this connector has a total of 6 contacts in a polarized housing design.
50-57-9007
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Rows Loaded: 1; Mating Contact Finish: NOT SPECIFIED;
50-57-9408
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; Total No. of Contacts: 8;
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 2200VAC; No. of Connectors: ONE;
50-57-9308
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE OR FEMALE; Body Length: .799 inch; Insulator Material: GLASS FILLED POLYESTER;
50-57-9410
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; Contact Design: PREASSEM CONN;
50-57-9708
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Manufacturer Series: 70066; Mating Contact Finish: NOT SPECIFIED; Total No. of Contacts: 8;
50-57-9202
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Termination Type: CRIMP; Polarization Key: POLAR PIN POSITION;
50-57-9422
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved