Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
BOARD CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED;
Median Price
$18.454
Lifecycle Status
Suppliers In-Stock
3
In-Stock Inventory
< 1k
Nova Conductors
1+ parts
100+ parts
-
1k+ parts
10k+ parts
VNN
Vyrian
Ampacity Inc.
$2.500
Aztec Data Supply Inc.
$8.230
AZTECH Wire
$8.936
Advanced Electronics
$10.296
$9.781
Semicontronic
$11.500
$11.212
$11.155
Bastille Electronics
$18.450
$17.528
$16.420
Continental Prestige Electronics
$18.085
Modulus Dynamics
$20.484
$20.279
$19.665
Argo Parts USA
Headers & Edge Type Connectors 851-43-045-10-011000 attributes and parameters. Explore more Headers & Edge Type Connectors devices from Mill-max Mfg
Connector Type:
Mating Contact Finish:
Contact Material:
851-43-045-10-011000 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.40
SB
Mill-Max Mfg. Corp. is a vertically integrated engineering and manufacturing company capable of producing over 100 million interconnect components a week, making us the largest manufacturer of precision machined interconnect components in North America.
ULN2803A
Vishay Intertechnology
NPN; Configuration: COMPLEX; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Package Body Material: PLASTIC/EPOXY; JESD-30 Code: R-PDIP-T18;
SS14
Promax-johnton
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
M24308/2-1F
Souriau-sunbank Connection Technologies
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body Length: 1.228 inch; Mounting Type: CABLE AND PANEL; Termination Type: CRIMP;
SMBJ18CA
KYOCERA AVX
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
Cheng-yi Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Unisonic Technologies
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Package Body Material: PLASTIC/EPOXY; Package Shape: RECTANGULAR;
1N4148WT
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
OPA2227UA
Burr-Brown Corporation
OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
Vishay Telefunken
Rugao Dachang Electronic
2N2222A
New England Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
1N4148
Digitron Semiconductors
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
1N4148WS
Formosa Microsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Good-ark Electronics
RECTIFIER DIODE; Surface Mount: NO; No. of Elements: 1; Maximum Non Repetitive Peak Forward Current: .5 A; Maximum Forward Voltage (VF): 1 V; No. of Phases: 1;
LM107H/883C
Rochester Electronics
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Package Equivalence Code: CAN8,.2;
Weitron Technology
RECTIFIER DIODE; Surface Mount: NO; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; Maximum Output Current: .15 A; Terminal Finish: Tin/Lead (Sn/Pb);
CRCW06031K00FKEAHP
Vishay Intertechnology's CRCW06031K00FKEAHP is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.33 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance and operating voltage of 75 V.
LM317T
Inchange Semiconductor
Other Regulators; No. of Terminals: 3; Surface Mount: NO; Technology: BIPOLAR; Minimum Output Voltage-1: 1.2 V; No. of Outputs: 1;
DF3-2P-2DSA(01)
Hirose Electric
DF3-2P-2DSA(01) by Hirose Electric is a 2-contact board connector with 0.079" pitch, gold termination finish, and 650VAC dielectric voltage. Ideal for commercial applications, it has a temperature range of -55 to 105°C and offers high durability with 50 cycles.
B6B-PH-SM4-TB(LF)(SN)
J S T Mfg
B6B-PH-SM4-TB(LF)(SN) by J S T Mfg is a BOARD CONNECTOR with 0.079" pitch, 2A signal current, and 800VAC dielectric voltage. Ideal for PCB applications requiring POLYAMIDE66 insulator, COPPER ALLOY contacts, and TIN COPPER finish in a compact 0.628"x.197"x.26" body.
78800-0001
Molex
Molex 78800-0001 is a card edge connector with 0.1" pitch, liquid crystal polymer insulator, and matte tin over nickel finish. It has 6 contacts, rated for 0.5A signal current, and operates b/w -30 to 85°C. Ideal for board mounting applications requiring high insulation resistance and reliable signal transmission.
746-064-520-601
Edac
Edac 746-064-520-601 is a 64-contact card edge connector with 0.125" pitch, suitable for PCBs with 2 rows. It features a dielectric voltage of 1500VAC and insulation resistance of 5Gohm, making it ideal for applications requiring high reliability in temperatures ranging from -40 to 105°C.
B8B-PH-SM4-TB(LF)(SN)
B8B-PH-SM4-TB(LF)(SN) by J S T Mfg is a BOARD CONNECTOR with 8 contacts, made of COPPER ALLOY. It features Tin/Copper (Sn/Cu) termination finish and has a terminal pitch of 2mm. Ideal for surface mount applications in headers & edge type connectors.
DT06-3S-EP06
TE Connectivity
TE Connectivity's DT06-3S-EP06 is a 3-contact board connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V, it operates b/w -55 to 125°C. Ideal for cable mounting applications, it has a polarization key and UL 94V-0 flammability code.
M50-3600542P
Harwin Plc
M50-3600542P by Harwin Plc is a 10-contact, surface mount board connector with a terminal pitch of 1.27mm. It features tin contact finish with a nickel barrier and is suitable for applications requiring UL flammability code 94V-0 compliance.
70553-0004
Molex 70553-0004 is a board connector with 0.1" pitch, ideal for commercial applications. Features TIN over nickel finish, UL94V-0 rated black polycarbonate insulator, and 15u plating thickness. Suitable for right-angle mounting on PCBs with rectangular contact pattern.
22-28-4037
Molex 22-28-4037 is a board connector with 0.1" pitch, 3 contacts, and 4A signal rating. It features glass-filled polyamide insulation, tin contact finish, and operates b/w 0-75°C. Ideal for commercial applications requiring reliable connections in electronic devices.
DF11-16DP-2DSA(01)
DF11-16DP-2DSA(01) by Hirose Electric is a 16-contact board connector with 0.079" pitch, 650VAC dielectric voltage, and gold finish. It is used in applications requiring a durable, high-current signal connection with UL and CSA standards compliance. The connector has a straight mounting style, black insulator color, and operates b/w -30 to 85°C temperatures.
TCMD-08-01
Samtec
Samtec's TCMD-08-01 is a 2-row board connector with 16 contacts made of phosphor bronze. It has a terminal pitch of 2mm and supports IDC/solder termination. Ideal for applications requiring male contact gender, straight mounting style, and compatibility with both board and cable mounting types.
51021-0800
The Molex 51021-0800 is a board connector with 8 contacts, 0.049" pitch, and 0.463" body length. It has an insulation resistance of 100M ohm and operates b/w -40 to 85°C. Ideal for commercial applications requiring a female crimp termination in a locking receptacle design.
746-012-520-606
Edac 746-012-520-606 is a 2-row card edge connector with 12 contacts. It has a mating contact pitch of 0.125", insulation resistance of 5Gohm, and dielectric voltage rating of 1500VAC. Ideal for PCB applications requiring high current signal transmission in temperatures ranging from -40 to 105°C.
54104-4031
Molex 54104-4031 is a FFC/FPC connector with 40 contacts, 0.020" pitch, and gold termination finish. Ideal for board mounting applications with a temperature range of -20 to 85°C. Features include polyamide insulator, 250VAC voltage rating, and UL94V-0 flammability code.
8-188275-0
TE Connectivity 8-188275-0 is a 2-row board connector with 10 contacts, rated for 1.5A signal current at 100V. Featuring a mating contact pitch of 0.05", it has a body length of 0.578" and insulation resistance of 1Gohm. Ideal for PCB applications requiring high reliability and operating temperatures from -40 to +105°C.
15910100
W+p Products
15910100 by W+p Products is a BOARD CONNECTOR with 10 contacts, rated at 3A. Featuring a mating contact pitch of 0.1", it has an insulation resistance of 1Gohm and operates b/w -40 to 105°C. Ideal for commercial applications requiring a right angle mounting style and solder termination.
17211102101
Harting Electronics & Kg
17211102101 by Harting Electronics & Kg is a BOARD CONNECTOR with 110 contacts, GOLD OVER NICKEL finish, and GLASS FILLED POLYETHYLENE insulator. It has a Mating Contact Pitch of 0.079", operates b/w -55 to 125 °C, and offers durability up to 250 cycles. Ideal for applications requiring high insulation resistance and reliable signal current of 1A in commercial settings.
70107-0004
Molex 70107-0004 is a BOARD CONNECTOR with 5 contacts, UL 94V-0 rated. It features MALE gender, CRIMP termination, and CABLE mounting. Ideal for various applications requiring reliable edge type connectors.
29-08-05WB-MG
3m Electronic Products Division
29-08-05WB-MG by 3m Electronic Products Division is a PCB connector with 8 contacts, gold finish, and polyethylene insulator. It has a mating contact pitch of 0.043", operates b/w -25 to 85°C, and withstands up to 500VAC. Ideal for commercial applications requiring reliable right-angle surface mount connections.
SM05B-SRSS-TB(LF)(SN)
SM05B-SRSS-TB(LF)(SN) by J S T Mfg is a 5-contact board connector with 0.039" pitch, ideal for PCB applications. Featuring TIN COPPER finish, POLYAMIDE insulator, and 500VAC dielectric voltage rating. Operating b/w -25 to 85 °C, it offers male contact gender and right-angle mounting style.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
851-43-030-30-001000
Mill-max Mfg
The Mill-max Mfg 851-43-030-30-001000 is a BOARD CONNECTOR with 30 contacts, TIN finish. It has a terminal pitch of 1.27mm and is designed for SURFACE MOUNT applications. The connector features FEMALE contact gender and SOCKET body style, suitable for STRAIGHT mounting on boards.
851-43-025-10-001000
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; MIL Conformity: NO; Total No. of Contacts: 25; DIN Conformance: NO;
851-43-025-10-002000
851-43-025-10-002000 by Mill-max Mfg is a BOARD CONNECTOR with 25 contacts, TIN finish. It has a terminal pitch of 1.27mm and uses SOLDER termination. Ideal for applications requiring FEMALE SOCKET connectors in STRAIGHT mounting style.
851-43-030-30-002000
The Mill-max Mfg 851-43-030-30-002000 is a BOARD CONNECTOR with 30 contacts, TIN finish. It has a terminal pitch of 1.27mm and is designed for SURFACE MOUNT applications. Ideal for use in electronic devices requiring FEMALE SOCKET connectors on PCBs.
851-43-025-10-011000
BOARD CONNECTOR; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED;
851-43-025-10-021000
851-47-053-10-002000
BOARD CONNECTOR; JESD-609 Code: e4; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED; Termination Contact Finish: GOLD;
851-43-045-10-021000
851-43-045-10-002000
851-43-045-10-002000 by Mill-max Mfg is a BOARD CONNECTOR with 45 FEMALE contacts. It features TIN finish, 1.27mm pitch, and SOLDER termination. Ideal for applications requiring reliable connections in electronic devices or PCBs.
851-43-045-10-001000
The Mill-max Mfg 851-43-045-10-001000 is a BOARD CONNECTOR with 45 contacts at 1.27mm pitch, TIN finish. It is a FEMALE SOCKET for board mounting applications, featuring STRAIGHT mounting style and SOLDER termination.
851-43-020-10-002000
Mill-max Mfg's 851-43-020-10-002000 is a BOARD CONNECTOR with 20 contacts, TIN finish. It has a terminal pitch of 1.27mm and uses SOLDER termination. Ideal for applications requiring FEMALE SOCKET connectors on PCBs in STRAIGHT mounting style.
851-43-025-20-001000
The Mill-max Mfg 851-43-025-20-001000 is a right angle socket board connector with 25 contacts and a terminal pitch of 1.27mm. It is terminated with TIN finish and is commonly used in headers & edge type connectors applications.
851-47-054-10-002000
BOARD CONNECTOR; Mating Contact Finish: NOT SPECIFIED; JESD-609 Code: e4; Termination Contact Finish: GOLD; Contact Material: NOT SPECIFIED;
851-43-045-20-001000
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mixed Contacts: NO; No. of Rows Loaded: 1; Filter Feature: NO;
851-43-004-10-001000
851-43-004-10-001000 by Mill-max Mfg is a board connector with 4 female contacts, gold over nickel finish. It has a mating contact pitch of 0.05" and uses solder termination. Ideal for applications requiring a straight mounting style and rectangular contact pattern.
851-43-004-20-001000
851-43-004-20-001000 by Mill-max Mfg is a board connector with a mating contact pitch of 0.05". Featuring gold over nickel termination, it has a rated current of 3A and total of 4 contacts. Ideal for commercial applications requiring right angle mounting and solder termination.
851-41-018-30-001000
BOARD CONNECTOR;
851-41-020-30-001000
851-41-018-30-002000
851-43-045-30-001000
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Contact Finish: NOT SPECIFIED; Termination Type: SURFACE MOUNT; Contact Material: NOT SPECIFIED;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved