Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
CONNECTOR ACCESSORY;
Median Price
$0.951
Lifecycle Status
Suppliers In-Stock
22
In-Stock Inventory
1k+
RS Americas
1+ parts
$0.860
100+ parts
$0.680
1k+ parts
-
10k+ parts
RS (Exports)
$0.910
Farnell
Adafruit Industries
$1.024
Chip1Stop
$1.120
$0.972
$0.864
$0.789
Newark
$1.300
Element14
$1.387
$1.305
$1.075
Distrelec
$1.484
$0.813
DigiKey
$1.530
$1.076
$0.850
Mouser Electronics
$1.740
$1.420
Heilind Electronics
$0.659
Interstate Connecting
$0.656
Verical
$0.826
TTI
$0.714
TTI Europe
$0.662
Digiode
$0.817
Nova Conductors
$1.004
Rapid Electronics
$2,461.617
Vyrian
IBS Electronics
$0.858
VNN
ABC Electronics Ltd.
Corphita
$0.774
Argo Parts USA
Netroflash
$0.954
$0.934
Advanced Electronics
Semicontronic
$1.110
$1.082
$1.077
Andel Nordic
$3.820
$3.667
Aztec Data Supply Inc.
$6.052
Perfect Parts
Continental Prestige Electronics
$0.912
$0.798
Assy Fe
ErreBi Group
Assembly Products 42817-1044 attributes and parameters. Explore more Assembly Products devices from Molex
Connector Accessory Type:
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
FDV304P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Moisture Sensitivity Level (MSL): 1; Maximum Drain Current (ID): .46 A;
DS18B20Z+T&R
Analog Devices
DS18B20Z+T&R by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. The sensor comes in a plastic package suitable for surface mount applications, with a max supply voltage of 5.5V and min of 3V.
LM2931Z-5.0G
Onsemi
LM2931Z-5.0G by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V output voltage, 0.6V dropout voltage, and 0.1A output current. It is ideal for applications requiring stable power supply in temperature-sensitive environments due to its operating range of -40°C to 125°C.
SMBJ18CA
Rectron
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Plessey Semiconductors Discrete Components Div
Other Transistors;
STM32H743IIT6
STMicroelectronics
STM32H743IIT6 by STMicroelectronics is a 32-bit microcontroller with integrated cache and a max supply voltage of 3.6V. It is commonly used in industrial applications due to its wide temperature range (-40°C to 85°C) and various connectivity options (CAN, I2C, UART, USB).
CRCW04020000Z0EDHP
Vishay Intertechnology
Vishay Intertechnology's CRCW04020000Z0EDHP is a 0402 SMT resistor with 0 ohm resistance, rated for temperatures from -55°C to 155°C. Ideal for jumper applications in automotive electronics due to AEC-Q200 compliance and compact size of 1mm x 0.5mm x 0.3mm.
BAV99
Motorola
RECTIFIER DIODE; Surface Mount: YES; Maximum Output Current: .1 A; Maximum Reverse Recovery Time: .006 us; Maximum Repetitive Peak Reverse Voltage: 70 V; JESD-609 Code: e0;
2N2222A
Loras Industries
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Secos
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .6 A; JEDEC-95 Code: TO-92;
Continental Device India
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; Package Body Material: PLASTIC/EPOXY; JEDEC-95 Code: TO-236AB;
1N4148WT
Diotec Semiconductor Ag
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1552200168
Molex
WIRE AND CABLE;
BSS138
NXP Semiconductors
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; No. of Terminals: 3; Maximum Drain Current (ID): .2 A; Operating Mode: ENHANCEMENT MODE;
SS495A-SP
Honeywell Sensing And Control
SS495A-SP by Honeywell is a magnetic field sensor with 10.5V max supply voltage, 3" body width, and 1.5% linearity. Ideal for applications requiring a Hall effect sensor with -40 to 150°C operating temperature range, such as position sensing in automotive or industrial systems.
1N4148
Diotec Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Central Semiconductor
MBRS360T3G
MBRS360T3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.63V and a max output current of 3A. It is designed for applications requiring high-speed switching and low power loss, making it suitable for use in various electronic devices.
CRGCQ0805F10K
TE Connectivity
TE Connectivity's CRGCQ0805F10K is a 10000 ohm fixed resistor with 1% tolerance. It operates b/w -55 to 155 °C and has a power dissipation of 0.125 W. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance.
LM358MX
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
M23053/5-103-9
Dunbar Products
ASSEMBLY ITEMS; MIL Conformity: NO; Assembly Item Name: TAPER SLEEVE; DIN Conformity: NO; Jacket Material: CROSSLINKED POLYOLEFIN; Construction: SINGLE WALL;
221-513/000-004
Wago
TERMINAL BLOCK ACCESSORY;
W2P
TE Connectivity's W2P is an Assembly Product for DT SERIES, with a max operating temp of 125°C and min of -55°C. It features POWER AND SIGNAL design, POLYBUTYLENE TEREPHTHALATE material, and supports up to 0 AWG wire size. Ideal for applications requiring high temperature resistance and robust electrical connections.
50-29-1900
The Molex 50-29-1900 is a brass contact with compression style, suitable for 7880 Series Housing. It supports wire sizes from 30 AWG to 24 AWG and has a 0.06 inch cable entry. The terminal length is 0.186 inch, making it ideal for straight mounting applications.
SPH-001T-P0.5L
J S T Mfg
SPH-001T-P0.5L by J S T Mfg is a CRIMP terminal CONTACT with FEMALE gender, made of BRASS. It features STRAIGHT mounting style and SQ PIN-SKT contact style. Ideal for assembly products requiring reliable electrical connections in various applications.
SVM-61T-P2.0
SVM-61T-P2.0 by J S T Mfg is a male contact assembly product for VL connectors, with approvals from CSA, TUV, and UL. It features crimp terminals suitable for 20-14 AWG wires, rated at 20A and 600V AC/DC. Operating temperatures range from -25 to 90°C making it ideal for various applications requiring reliable electrical connections.
13697409
Delphi Connection Systems
CONNECTOR ACCESSORY; IEC Conformity: NO; Assembly Item Name: CONTACT; Material: COPPER ALLOY; DIN Conformity: NO; Minimum Cable Entry: .075 inch;
FSD77-8-D
Panduit
Panduit's FSD77-8-D ferrule has CSA approval, DIN conformity, and polypropylene insulator. It supports 18 AWG wire with a 0.12" cable entry. Ideal for electrical assembly applications.
WP-2P
Amphenol
CONNECTOR ACCESSORY; MIL Conformity: NO; Maximum Operating Temperature: 125 Cel; IEC Conformity: NO; Material: POLYETHYLENE; DIN Conformity: NO;
936012157
3030336
Phoenix Contact
TERMINAL BLOCK ACCESSORY; Assembly Item Name: JUMPER ITEM; DIN Conformity: NO; IEC Conformity: NO; MIL Conformity: NO;
16-02-0103
SS16M1F
CONNECTOR ACCESSORY; Manufacturer Series: SS16M1;
770854-1
TE Connectivity's 770854-1 is a CRIMP terminal with stamped contact design. It supports wire gauge from 20 AWG to 16 AWG, rated for 8A current. Ideal for applications requiring female contact gender and straight mounting style with round pin-socket contact design.
FMK2G-K201
FMK2G-K201 by Molex is an assembly product with UL approvals. It has a max operating temperature of 100°C and a min operating temperature of -35°C. This zinc hood can be mounted using screws or #4-40 option.
936010822
09330006102
Harting Electronics & Kg
09330006102 by Harting Electronics & Kg is a HAN E CONNECTOR with CRIMP terminals for 14 AWG wire. It has approvals for IEC 60664-1 and IEC 61984, rated at 16 A current with male contact gender. The CONTACT features copper alloy material, 1 mohm resistance, RND PIN-SKT style, and STRAIGHT mounting suitable for various assembly applications.
7-1452665-1
TE Connectivity's 7-1452665-1 is a CRIMP terminal with stamped contact design. It supports wire gauge from 23 to 22 AWG and rated current of 10A. Ideal for applications requiring female contact gender, with operating temperatures ranging from -40°C to 130°C.
AT13-204-2005
W3S-P012
TE Connectivity's W3S-P012 is a POWER AND SIGNAL assembly item for DT SERIES. With a temp range of -55 to 125 °C, it accommodates wires up to 0 AWG. Made of POLYBUTYLENE TEREPHTHALATE, it serves as a WEDGE ITEM in various applications.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
42815-0144
Molex 42815-0144 is a female contact for Mini Fit connectors. Made of copper alloy, it supports wire sizes from 16 to 14 AWG. With a bellowed type design and straight mounting style, it is ideal for power applications with a finish thickness of 10.
42815-0012
Molex 42815-0012 CONTACT features CRIMP terminal for 12-10 AWG wires. Made of COPPER ALLOY, it has 0.209" cable entry and suits FEMALE connectors in STRAIGHT mount. Ideal for applications requiring durable bellowed-type contacts with 30 finish thickness.
42815-0114
42817-0012
Assembly Items;
42815-0041
CONNECTOR ACCESSORY; Minimum Wire Size: 16 AWG; Design: POWER; Contact Gender: FEMALE; Mounting Style: STRAIGHT; DIN Conformity: NO;
42815-0011
CONNECTOR ACCESSORY; Contact Style: BELLOWED CONTACT; MIL Conformity: NO; Terminal Type: CRIMP; Cable Types: WIRE, STRANDED; Assembly Item Name: CONTACT;
428150042
The Molex 428150042 is a crimp terminal contact with a finish thickness of 30. It is made of copper alloy and has a min wire size of 16 AWG and max wire size of 14 AWG. This female contact is used in assembly products for straight mounting applications.
42815-0031
Molex 42815-0031 CONTACT features CRIMP terminal type, 100 finish thickness, and FEMALE contact gender. Ideal for applications requiring a max wire size of 8 AWG and 0.26" cable entry. Suitable for straight mounting with bellowed copper alloy construction.
42817-1014
Molex 42817-1014 is a CRIMP male CONTACT with STRAIGHT mounting style. Made of BRASS, it features RND PIN-SKT contact style. Ideal for assembly products, this component is commonly used in various electronic applications.
42817-0011
Molex 42817-0011 CONTACT is a POWER male terminal with CRIMP type, suitable for wire sizes 12-10 AWG. Rated for 50A current, it has a 0.209" cable entry and is used in assemblies 43818 and 43938.
42817-0042
Molex 42817-0042 CONTACT features CRIMP terminal type, COPPER ALLOY material, and 0.282" terminal length. Ideal for applications requiring MALE contact gender with wire sizes ranging from 16 to 14 AWG in STRAIGHT mounting style.
42815-0032
Molex 42815-0032 CONTACT features CRIMP terminal type, FEMALE contact gender, and COPPER ALLOY material. Suitable for 8 AWG wire with 0.26" cable entry. Ideal for straight mounting applications in assembly products.
42817-0032
42815-0134
CONNECTOR ACCESSORY; Manufacturer Series: 42815;
42817-0021
CONNECTOR ACCESSORY; Rated Current: 49 A; Maximum Wire Size: 10 AWG; IEC Conformity: NO; Terminal Type: CRIMP; Rated DC Voltage: 250 V;
42817-0142
42817-1144
42817-1034
CONNECTOR ACCESSORY; Assembly Item Name: CONTACT; Contact Style: RND PIN-SKT; Mounting Style: STRAIGHT; MIL Conformity: NO; DIN Conformity: NO;
42817-1114
CONNECTOR ACCESSORY; DIN Conformity: NO; IEC Conformity: NO; Mounting Style: STRAIGHT; Material: BRASS; MIL Conformity: NO;
42817-1134
CONNECTOR ACCESSORY; Contact Style: RND PIN-SKT; Material: BRASS; Contact Gender: MALE; Mounting Style: STRAIGHT; Assembly Item Name: CONTACT;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved