Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Molex 5016471000 is an IGRID receptacle housing with stamped contact design. It supports wire sizes from 26-22 AWG, rated for 250V AC/DC and 2A current. Ideal for signal applications, featuring copper alloy material and straight mounting style.
Median Price
$0.070
Lifecycle Status
Suppliers In-Stock
33
In-Stock Inventory
1k+
RS Americas
1+ parts
$0.020
100+ parts
-
1k+ parts
10k+ parts
Newark
Element14
$0.081
$0.080
$0.061
DigiKey
$0.100
$0.054
$0.046
$0.043
Verical
Powell Electronics
NEP Electronics
Master Electronics
Farnell
Arrow
TTI
Interstate Connecting
Mouser Electronics
RS (Exports)
Chip1Stop
$0.026
Heilind Electronics
$0.045
$0.038
TTI Europe
PSC Electronics
Digiode
$0.019
Nova Conductors
$0.060
Maritex
$0.068
$0.022
$0.016
$0.012
Bristol Electronics
$0.150
$0.075
$0.030
Vyrian
IBS Electronics
Chip Stock
NAC Semi
Cyclops Electronics Ltd
EMSNET
Rotakorn
VNN
Sunrise Surplus Inc.
Prism Electronics
LWI Electronics Inc
Semicontronic
$0.017
Corphita
$0.018
Continental Prestige Electronics
$0.050
$0.049
Argo Parts USA
$0.048
Netroflash
Andel Nordic
$2.643
$2.537
Aztec Data Supply Inc.
$4.970
Perfect Parts
Eastek
Assy Fe
EMSNET (Excess)
Abacus Technologies
GreenTree Electronics
$0.031
ErreBi Group
Infinite Electronics LLP (Excess)
Formix International (Excess)
Futuretech Components
Robosynatics
$7.001
$6.858
Kepictronics
Fairview Electronics Ltd
This product is specifically designed for use as a receptacle housing in IGRID applications, ensuring compatibility and reliable performance.
The optimal finish thickness of 27.6 ensures durability and longevity, making this product a reliable choice for long-term use.
The crimp terminal type allows for secure connections, minimizing the risk of loose connections or disconnections during use.
The small minimum cable entry size of 0.037 inch enables easy and efficient cable installation, saving time and effort during assembly.
With a high rated AC voltage of 250V, this product is suitable for use in a variety of applications, providing versatility and flexibility.
The stamped contact design ensures optimal conductivity and reliability, making this product a dependable choice for efficient electrical connections.
The assembly item name "CONTACT" clearly identifies the specific component, aiding in easy identification, maintenance, and replacement when needed.
The compatibility with a minimum wire size of 26 AWG allows for connections with smaller gauge wires, expanding the range of applications for this product.
The compatibility with a maximum wire size of 22 AWG ensures versatility, allowing for connections with a range of wire sizes without the need for additional adapters.
The high rated current of 2A allows for the safe and efficient transmission of power, making this product suitable for various electrical applications.
The large maximum cable entry size of 0.059 inch provides flexibility in cable selection, accommodating a wide range of cable sizes for convenient installation.
The female contact gender ensures compatibility with male connectors, offering a standardized and universal connection solution.
The signal design is specifically suited for transmitting signals, making this product ideal for applications that require precise and reliable signal transmission.
The straight mounting style simplifies installation and ensures a secure fit, making this product easy to integrate into various assembly configurations.
The square pin/socket contact style provides a stable and secure connection, minimizing the risk of signal loss or disconnection during operation.
The copper alloy material offers excellent conductivity and corrosion resistance, ensuring reliable performance and longevity in demanding environments.
The terminal length of 0.122 inch provides ample space for secure connections, reducing the risk of short circuits or loose contacts.
With a high rated DC voltage of 250V, this product is suitable for a wide range of DC applications, offering versatility and compatibility for various electrical systems.
Assembly Products 5016471000 attributes and parameters. Explore more Assembly Products devices from Molex
Additional Features:
Assembly Item Name:
Maximum Cable Entry:
Minimum Cable Entry:
Connector Accessory Type:
Contact Design:
Contact Gender:
Contact Style:
DIN Conformity:
Design:
Finish Thickness:
IEC Conformity:
MIL Conformity:
Material:
Mounting Style:
Rated Current:
Rated AC Voltage:
Rated DC Voltage:
Terminal Length:
Terminal Type:
Usage:
Maximum Wire Size:
Minimum Wire Size:
5016471000 Connector Accessories trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.90.40.00
SB
PCN Design/Specification - 50164yy00 Product Improvement 30/Sep/2020
PCN Assembly/Origin - Multiple Devices Origin 24/Aug/2016
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
2N7002DWH6327XTSA1
Infineon Technologies
2N7002DWH6327XTSA1 by Infineon: N-CHANNEL FET with 60V DS Breakdown Voltage, 0.3A ID, and 3ohm RDS. Ideal for SWITCHING applications in small outline packages with GULL WING terminals.
1N4148
Surge Components
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
OPA2227UA
Texas Instruments
OPA2227UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 200 uV and bias current of 0.01 uA. It operates at temperatures ranging from -40 to 85 °C, making it suitable for industrial applications requiring precise signal amplification. With a unity gain bandwidth of 8000 kHz, this op amp is ideal for high-frequency circuit designs.
2N7002
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; No. of Elements: 1; Transistor Application: SWITCHING;
Bytesonic Electronics
LM358M
Fairchild Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
MMBT3904-7-F
Diodes Incorporated
Diodes Inc. MMBT3904-7-F is a NPN BJT transistor for switching applications. Features include VCEsat of 0.3V, hFE of 30, and IC of 0.2A. With a max operating temp of 150°C, it's ideal for small outline SMT designs in automotive electronics.
LL4148
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
SS14
Daco Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358AN
Signetics
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
BSS138
Taitron Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3.5 ohm; Maximum Drain Current (ID): .2 A; Peak Reflow Temperature (C): NOT SPECIFIED;
SMBJ18CA
Synsemi
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ABS10-32.768KHZ-T
Abracon
Abracon's ABS10-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 122% stability, and 70000 ohm series resistance. Ideal for applications requiring precise timing at 0.032768 MHz, such as IoT devices and wearables due to its compact size and low power consumption.
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Operating Mode: ENHANCEMENT MODE; Minimum DS Breakdown Voltage: 60 V; Package Shape: RECTANGULAR;
BAV99
Plessey Semiconductors Discrete Components Div
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Pro-an Electronic
Motorola
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Package Body Material: PLASTIC/EPOXY; Qualification: Not Qualified; Minimum Operating Temperature: -55 Cel;
4554
Jw Miller Magnetics
Other Semiconductors;
Leshan Radio
RECTIFIER DIODE; Surface Mount: YES; Maximum Non Repetitive Peak Forward Current: 2 A; Maximum Reverse Recovery Time: .004 us; No. of Phases: 1; Maximum Operating Temperature: 175 Cel;
LM358N
Philips Semiconductors
13663727
Aptiv
CONNECTOR ACCESSORY;
828905-1
TE Connectivity
TE Connectivity 828905-1 CONTACT features CRIMP terminal type, 0.0866" min cable entry, and -40 to 130°C operating temp. Ideal for STRAIGHT mounting with 0 AWG wire size, it's used in various assembly applications.
1060-16-0122
TE Connectivity's 1060-16-0122 contact features crimp terminal type, stamped design, and copper alloy material. With wire gauge of 14 AWG and rated current of 13 A, it is ideal for applications requiring male round pin-socket contacts in straight mounting style.
1300580035
Molex
CONNECTOR ACCESSORY; MIL Conformity: NO; Material: POLYAMIDE; Assembly Item Name: CAP ITEM; Mounting Option-1: LOCKING; Additional Features: IP67;
6766-2000
Conexcon Group
6766-2000 by Conexcon Group is a CRIMP terminal CONTACT with FEMALE gender, made of BRASS. It features STRAIGHT mounting style and SQ PIN-SKT contact style. Ideal for assembly products requiring reliable electrical connections in various applications.
776364-1
CONNECTOR ACCESSORY; Minimum Operating Temperature: -40 Cel; Wire Gauge (AWG): 0; Maximum Wire Size: 0 AWG; Maximum Operating Temperature: 125 Cel;
2170704-5
TE Connectivity's 2170704-5 is a QSFP28 cable assembly with UL approval. It features compliant fit terminals, operating from -40 to 85°C. Designed for signal transmission, it uses nickel silver alloy material and supports up to 0 AWG wire size.
170366-1
TE Connectivity's 170366-1 plug housing features a stranded construction with crimp terminals, rated for 600V and 7A. Suitable for discrete wire applications, it has a brass design with female contacts and operates b/w -20 to 105°C.
08-55-0101
Molex 08-55-0101 contact features crimp terminal type, chain contact design, and brass material. Ideal for applications requiring female contacts with compression style in straight mounting. Supports wire sizes from 30 AWG to 22 AWG with a finish thickness of 15.
13697415
Delphi Connection Systems
CONNECTOR ACCESSORY; Cable Types: FLRY-B; Contact Gender: FEMALE; Assembly Item Name: CONTACT; Additional Features: CONTACT FINISH: GOLD; Maximum Cable Entry: .0945 inch;
50837-8000
The Molex 50837-8000 is a CRIMP terminal with CHAIN contact design. It supports wire sizes from 28 AWG to 22 AWG and cable entries up to 0.071". Ideal for applications requiring MALE contacts, such as straight mounting in assembly products.
8599-0720-900
Souriau
SXA-001T-P0.6L
J S T Mfg
SXA-001T-P0.6L by J S T Mfg is a CRIMP terminal CONTACT with 3A rated current, suitable for XA CONNECTOR applications. It has approvals from CSA, TUV, and UL, with a temperature range of -25 to 85 °C. The FEMALE contact is made of PHOSPHOR BRONZE material and supports wire sizes from 26 to 22 AWG.
1SNK900101R0000
Abb
CONNECTOR ACCESSORY; Wire Gauge (AWG): 0; Maximum Wire Size: 0 AWG; Maximum Operating Temperature: 110 Cel; Insulator Material: POLYAMIDE; Minimum Operating Temperature: -55 Cel;
SVH-41T-P1.1
SVH-41T-P1.1 by J S T Mfg is a CRIMP terminal with approvals from CSA, TUV, and UL. It supports wire sizes from 20 AWG to 16 AWG, rated for 10 A current at 250 V AC/DC. Ideal for applications requiring FEMALE contacts with SQUARE PIN-SOCKET style in straight mounting configuration.
685030101
5749081-1
CONNECTOR ACCESSORY; Shielding: YES; MIL Conformity: NO; Wire Gauge (AWG): 0; Material: ZINC ALLOY; Additional Features: SHIELDED;
WP-2S
Amphenol
CONNECTOR ACCESSORY; Maximum Operating Temperature: 125 Cel; MIL Conformity: NO; DIN Conformity: NO; IEC Conformity: NO; Material: POLYETHYLENE;
DF3-22SCF
Hirose Electric
DF3-22SCF by Hirose Electric is a female contact with bellowed type, made of phosphor bronze. It has a finish thickness of 39.4 and terminal length of 0.108 inch. This assembly product is used for crimp terminals in straight mounting applications.
1SNA199336R2000
TERMINAL BLOCK ACCESSORY;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
5016471100
The Molex 5016471100 CONTACT is a FEMALE signal contact with CRIMP terminal type. It has a rated current of 2A, contact resistance of 20 mohm, and operates b/w -40 to 105 °C. Ideal for applications requiring a SQUARE PIN-SOCKET design in Assembly Products.
501648-1000
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved