Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Molex 395156520 is a Barrier Strip Terminal Block with 20 ways, rated for 300V voltage and 8A current. It supports wire gauge up to 16 AWG and has a wire cross section of 1.309 mm2. Ideal for board mounting applications requiring secure connections via connectors.
Median Price
$6.347
Lifecycle Status
Suppliers In-Stock
4
In-Stock Inventory
1k+
Nova Conductors
1+ parts
100+ parts
-
1k+ parts
10k+ parts
Vyrian
Digiode
VNN
Bastille Electronics
$6.030
$5.728
$5.649
Andel Nordic
$10.895
$10.459
AZTECH Wire
$19.104
Corphita
Board mounting allows for easy and secure installation on a variety of surfaces, making it versatile for different applications.
Supports a wide range of wire gauges, ensuring compatibility with various types of wiring systems.
Rated for higher voltages, providing safety and reliability for electrical connections.
Barrier strip terminal blocks offer a secure connection, preventing accidental disconnection and ensuring stability in the wiring setup.
Suitable for accommodating wires of different sizes, making it versatile for various wiring configurations.
Connector fastening method allows for quick and easy installation, saving time and effort during setup.
Rated for a high current capacity, suitable for applications requiring robust electrical connections.
With 20 ways, this terminal block offers ample connection points for multiple wires or circuits, providing flexibility in the wiring setup.
Terminals & Terminal Blocks 395156520 attributes and parameters. Explore more Terminals & Terminal Blocks devices from Molex
Product Type:
Additional Features:
Rated Voltage:
Rated Current:
Wire Gauge:
Wire Cross Section:
Total Ways:
Total Decks:
Total Rows:
Mounting Style:
Fastening Style:
395156520 Terminals & Terminal Blocks trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.90.40.00
SB
PCN Design/Specification - 39505/39506/39515/39516 Series Design 29/May/2014
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
ULN2803A
Allegro MicroSystems
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Maximum Operating Temperature: 85 Cel; Terminal Form: THROUGH-HOLE;
LM358M
Texas Instruments
LM358M by Texas Instruments is an Operational Amplifier with 2 functions, featuring a max input offset voltage of 9000 uV and a nominal voltage of 5 V. It is commonly used in applications requiring high common mode rejection ratio and low bias current, such as sensor interfaces and signal conditioning circuits.
LM78L05ACMX/NOPB
LM78L05ACMX/NOPB by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and max current of 0.1A. It operates b/w 0-125°C, has a dropout voltage of 1.6V, and can handle input voltages up to 30V making it ideal for various electronic applications requiring stable power supply.
KSZ9031RNXIC
Micrel
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 48; Package Code: HVQCCN; Package Shape: SQUARE;
LM317TG
LM317TG by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max output current of 1.5A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. The package style is flange mount, with a rectangular shape and through-hole terminals for easy installation.
2N7002
Continental Device India
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; Package Body Material: PLASTIC/EPOXY; JEDEC-95 Code: TO-236AB;
1552200253
Molex
WIRE AND CABLE;
LM317T/NOPB
LM317T/NOPB by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max input-output voltage differential of 40V. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. The package style is flange mount with three terminals for easy installation.
2N2222A
Tt Electronics Plc
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .8 A; JESD-30 Code: O-MBCY-W3;
LL4148
Vishay Intertechnology
Vishay Intertechnology's LL4148 diode features a max reverse recovery time of 0.004 us, forward voltage of 1 V, and output current of 0.15 A. Ideal for rectification applications in electronics due to its high efficiency and low power dissipation capabilities.
ESD5Z5.0T1G
Onsemi
ESD5Z5.0T1G by Onsemi is a unidirectional Trans Voltage Suppressor Diode with 5V reverse test voltage and 174W peak power dissipation. It is used for transient suppression in electronic circuits, meeting IEC-61000-4-2, 4-4 standards and UL recognized for reliability.
SS14
Panjit International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ISO1050DUBR
ISO1050DUBR by Texas Instruments is a network interface IC with 8 terminals, operating from -55 to 105°C. It features a small outline package, nickel palladium gold finish, and gull wing terminal form. Ideal for telecom applications requiring a 5V supply voltage and peak reflow temperature of 260°C.
MBR0520LT1G
MBR0520LT1G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, has a peak reflow temperature of 260°C, and a repetitive peak reverse voltage of 20V. This diode is ideal for applications requiring high-speed switching in compact electronic devices.
BAV99
Meritek Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
ATMEGA328P-AU
Atmel
MICROCONTROLLER, RISC; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 32; Package Code: TQFP; Package Shape: SQUARE;
BSS138
Vishay Intertechnology's BSS138 is a N-CHANNEL FET with SINGLE configuration and ENHANCEMENT MODE operation. It features 0.35W power dissipation, METAL-OXIDE SEMICONDUCTOR tech, and 150°C max temp. Ideal for surface mount applications in various electronic circuits requiring efficient power management.
1N4148
General Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
ROHM
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .6 A;
1N5819HW-7-F
Diodes Incorporated
1N5819HW-7-F by Diodes Inc. is a Schottky rectifier diode with 40V reverse test voltage, 1A output current, and 0.75V forward voltage. It's a surface mount device in a small outline package ideal for efficiency applications at temperatures ranging from -65 to 125°C.
282109-1
TE Connectivity
TE Connectivity's 282109-1 TAB TERMINAL is a MALE terminal block with UL approval, rated for 14A current and compatible with 15 AWG wire. Ideal for applications requiring a wire cross section of 1.5 mm2 such as automotive and industrial electrical connections.
2002-1611/1000-541
Wago
MODULAR TERMINAL BLOCK;
MS25036-102
RING TERMINAL; Additional Features: MATERIAL: COPPER; INSULATION: NYLON; Wire Gauge: 16 AWG; Voltage (Rated): 300 V; Safety Approval: UL; No. of Ways: 1;
MS25036-124
Amphenol Communications Solutions
RING TERMINAL; Wire Gauge: 4 AWG;
D-436-36CS2881
WIRE TERMINAL; Wire Gauge: 20 AWG; Safety Approval: UL; Wire Cross Section: .61 mm2;
1755749
Phoenix Contact
Phoenix Contact 1755749 is a STRIP TERMINAL BLOCK with 3 ways, rated for 12A current and 320V voltage. It mounts on BOARD using CONNECTOR fastening method. Safety approvals include CB, CCA, CSA, CUL, EAC, and UL. Ideal for industrial applications requiring secure electrical connections.
3003017
Phoenix Contact 3003017 is a DIN RAIL mounted MODULAR TERMINAL BLOCK with 2 ways. It has a rated voltage of 800V and current of 32A, suitable for wire gauge up to 12 AWG and wire cross section of 4 mm2. Safety approved by BV, CSA, CUL, DNVGL, EAC, KR for various industrial applications.
M81824/12-3
WIRE TERMINAL; Mounting Type: CABLE; Wire Gauge: 12 AWG; Safety Approval: UL; Wire Cross Section: 2.94 mm2;
3-282836-2
TE Connectivity 3-282836-2 is a modular terminal block with 4 ways, rated for 300V voltage and 13.5A current. It uses solder fastening method and supports wire gauge up to 16 AWG. Ideal for board mounting applications with UL safety approval.
3557
Keystone Electronics
PUSH-ON TERMINAL; Terminal Gender: FEMALE;
640905-1
TE Connectivity 640905-1 is a female push-on terminal with UL approval for 14 AWG wire, rated at 300V. Ideal for applications requiring secure electrical connections in terminals and terminal blocks.
282834-8
Tyco Electronics Amp
MODULAR TERMINAL BLOCK; Mounting Type: BOARD; Fastening Method: SCREW; Wire Gauge: 16 AWG; Voltage (Rated): 150 V; No. of Ways: 8;
8-323912-1
TE Connectivity's 8-323912-1 is a UL-approved FEMALE RING TERMINAL for 22 AWG wire with a rated voltage of 300V. Ideal for applications requiring secure electrical connections in terminals and terminal blocks.
1025
Zierick Manufacturing
PCB TERMINAL; Terminal Gender: FEMALE;
1827716
Phoenix Contact 1827716 is a UL-approved modular terminal block for PANEL mounting. It supports wire gauge up to 16 AWG with rated voltage of 160V and current of 8A. Ideal for applications requiring secure connections in industrial control systems.
830
Ntt
LUG TERMINAL; Additional Features: MATERIAL: STEEL; FINISH: TIN;
1SNK506410R0000
Abb
MODULAR TERMINAL BLOCK; Mounting Type: DIN RAIL; Wire Gauge: 10 AWG; Voltage (Rated): 150 V; No. of Decks: 1; Wire Cross Section: 4 mm2;
1731734
Phoenix Contact 1731734 is a UL-approved barrier strip terminal block with 3 ways, rated for 24A current and 500V voltage. It accommodates wire gauge up to 12 AWG and wire cross-section of 2.5mm², mounted on board using screw fastening method. Ideal for industrial applications requiring secure electrical connections.
1809160
STRIP TERMINAL BLOCK;
1702042
BARRIER STRIP TERMINAL BLOCK;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
395173002
BARRIER STRIP TERMINAL BLOCK; Fastening Method: SCREW; Additional Features: NYLON 66; Wire Gauge: 16 AWG; No. of Ways: 2; Manufacturer Series: 39517;
395156514
The Molex 395156514 is a 1-row barrier strip terminal block with 14 ways and a wire gauge of 16 AWG. It has a rated voltage of 300V and can handle a current of up to 8A. This terminal block is commonly used for board mounting in various applications.
395156511
Molex 395156511 is a 1-row barrier strip terminal block with 11 ways and a wire gauge of 16 AWG. It has a rated voltage of 300V and can handle a current of up to 8A. This terminal block is commonly used for board mounting in various applications.
395156512
BARRIER STRIP TERMINAL BLOCK; Mounting Type: BOARD; Fastening Method: CONNECTOR; Additional Features: STANDARD: 94V-0, POLYAMIDE66, EUROSTYLE; Wire Gauge: 16 AWG; Voltage (Rated): 300 V;
395156517
Molex 395156517 is a BARRIER STRIP TERMINAL BLOCK with 17 ways, rated for 300V voltage and 8A current. It supports 16 AWG wire gauge and has a wire cross section of 1.309 mm2. Ideal for BOARD mounting applications requiring secure CONNECTOR fastening.
395178420
BARRIER STRIP TERMINAL BLOCK; Fastening Method: SCREW; Additional Features: NYLON 66; Wire Gauge: 16 AWG; Manufacturer Series: 39517; No. of Ways: 20;
395156513
Molex 395156513 is a BARRIER STRIP TERMINAL BLOCK for BOARD mounting. It supports 16 AWG wire gauge with 1.309 mm2 wire cross section and rated at 300V/8A. Ideal for applications requiring secure connections in electrical circuits with up to 13 ways.
395156519
395133417
BARRIER STRIP TERMINAL BLOCK; Mounting Type: CONNECTOR; Fastening Method: SCREW; Additional Features: MATERIAL: POLYAMIDE66, EUROSTYLE; Wire Gauge: 16 AWG; Voltage (Rated): 300 V;
395156510
395133003
395137007
395156516
395133007
Molex 395133007 is a Barrier Strip Terminal Block with 7 ways, rated for 300V voltage and 8A current. It supports wire gauge up to 16 AWG and has a wire cross section of 1.309 mm2. Ideal for connecting multiple wires securely in various electronic applications.
39510-0007
BARRIER STRIP TERMINAL BLOCK; Mounting Type: CONNECTOR; Fastening Method: SCREW; Additional Features: STANDARD: 94V-0, POLYAMIDE66; Wire Gauge: 16 AWG; Voltage (Rated): 300 V;
395138007
395100002
Molex 395100002 is a UL-approved BARRIER STRIP TERMINAL BLOCK with 16 AWG wire gauge, rated for 300V and 8A current. It features a screw fastening method and accommodates 2 ways, ideal for various connector applications.
395156502
395156507
395156518
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved