Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Molex MS-25036-112 is a UL-approved RING TERMINAL with 10 AWG wire gauge and 300 V rated voltage. It has a wire cross section of 6.64 mm2 and is suitable for various applications requiring secure electrical connections.
Median Price
$0.250
Lifecycle Status
Suppliers In-Stock
41
In-Stock Inventory
1k+
Adafruit Industries
1+ parts
$0.190
100+ parts
$0.180
1k+ parts
10k+ parts
-
Sager
$0.226
$0.202
$0.192
Interstate Connecting
$0.219
$0.198
Mouser Electronics
$0.590
$0.422
$0.325
$0.276
TTI
$0.245
Heilind Electronics
$0.215
Master Electronics
$0.742
$0.734
March Electronics
Verical
$0.392
$0.326
$0.259
Arrow
Digiode
Freelance Electronics
$0.218
$0.229
$0.216
TEDSS.com
$0.120
Bristol Electronics
$0.412
$0.153
$0.116
Nova Conductors
$0.539
Electro Enterprises
$0.719
$0.657
$0.397
$0.354
FDH Electronics
$1.079
$0.595
$0.531
IBS Electronics
$1.041
$1.029
Bisco
Vyrian
Mil-Aero Solutions, Inc.
LIBRA Elektronik GmbH
Global Solutions Electronics Company
Netsource Technology, Inc.
Resion
DF Sales Co.
Q Components
EMSNET
Beltway Electronics Company
Van Brakel Electronic
R&J Components
A2Z Electronics, Inc.
American Connector Supply Corp
NAC Semi
Kallista Electronics Ltd
Prism Electronics
South Electronics
Electronic Expediters
PC Components Company LLC
Sogenti Electronics
Corphita
$0.171
Modulus Dynamics
$0.184
Argo Parts USA
$0.400
$0.388
Continental Prestige Electronics
Aranea Global
$0.528
$0.507
Bastille Electronics
$0.512
$0.486
$0.480
Authorized Procurement Solutions
Assy Fe
Aztec Data Supply Inc.
Perfect Parts
This product meets safety standards set by UL, ensuring reliable and secure connections.
Suitable for handling high power currents, allowing for efficient transmission in various applications.
Designed to safely handle voltages up to 300 volts, providing versatility and compatibility with different electrical systems.
Equipped with ring terminals, facilitating easy and secure connections, enhancing durability and reliability.
Offers ample space for wire insertion, reducing the risk of short circuits and ensuring efficient electrical conductivity.
Provides a single connection point, ideal for simple applications requiring only one wire connection.
Terminals & Terminal Blocks MS-25036-112 attributes and parameters. Explore more Terminals & Terminal Blocks devices from Molex
Product Type:
Additional Features:
Safety Compliance:
Rated Voltage:
Wire Gauge:
Wire Cross Section:
Total Ways:
MS-25036-112 Terminals & Terminal Blocks trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.90.40.00
SB
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
1N4148
Itt Components
RECTIFIER DIODE; Surface Mount: NO; Config: SINGLE; Maximum Operating Temperature: 200 Cel; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Output Current: .15 A;
MBR130T1G
Onsemi
MBR130T1G by Onsemi is a Schottky rectifier diode with max output current of 1A and max repetitive peak reverse voltage of 30V. It operates b/w -65 to 125°C, suitable for surface mount applications in electronics requiring low forward voltage drop.
2N7002
Siliconix
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain Current (ID): .115 A; Operating Mode: ENHANCEMENT MODE;
Iskra Semic Capacitors Industry
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Operating Temperature: 200 Cel; JESD-609 Code: e0; Maximum Non Repetitive Peak Forward Current: 2 A;
ERJ3GEY0R00V
Panasonic
ERJ3GEY0R00V by Panasonic is a SMT fixed resistor with 0 ohm resistance, suitable for jumper applications. It features a metal glaze/thick film technology, rated for temperatures b/w -55 to 155 °C. With a compact rectangular construction and matte tin over nickel terminal finish, it is ideal for surface mount installations in various electronic devices.
M39029/56-351
TE Connectivity
TE Connectivity's M39029/56-351 is a CRIMP contact type backshell accessory with rated voltage of 115V. It operates b/w -65 to 175 °C, suitable for MIL-C-39029/56 connectors with wire gauge ranging from 28 to 22 AWG. Ideal for military applications requiring female contacts and copper alloy material.
Transys Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM107H/883C
National Semiconductor
LM107H/883C by National Semiconductor is a MILITARY-grade Operational Amplifier with +-5/+-15V supplies. Featuring 2000uV max input offset voltage, it operates from -55 to 125 °C. Ideal for applications requiring VOLTAGE-FEEDBACK architecture and frequency compensation.
LD1117S33TR
STMicroelectronics
LD1117S33TR by STMicroelectronics is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 1.3A. It has a small outline package style, operates at an adjustable temperature range from 0 to 125°C, and is ideal for applications requiring stable voltage regulation in compact electronic devices.
2N2222A
SPC TECHNOLOGY/ MULTICOMP
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Panjit International
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Time At Peak Reflow Temperature (s): 40; Minimum DS Breakdown Voltage: 60 V;
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Minimum DS Breakdown Voltage: 60 V; Maximum Operating Temperature: 150 Cel;
DS18B20
Dallas Semiconductor
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 3; Package Shape or Style: ROUND; Housing: PLASTIC; Output Interface Type: 1-WIRE INTERFACE;
BAV99
Gec Plessey Semiconductors
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
Sangdest Microelectronics (Nanjing)
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM107H
Intersil
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Nominal Common Mode Reject Ratio: 96 dB;
OPA2277UA/2K5
Texas Instruments
OPA2277UA/2K5 by Texas Instruments is a dual operational amplifier with low offset voltage of 100 uV and micropower consumption of 0.004 uA. Ideal for industrial applications, it offers high common mode rejection ratio of 140 dB and unity gain bandwidth of 1 MHz. With a compact rectangular package style, it is suitable for surface mount designs in various electronic systems.
LM555CN
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
World Products
E8WSDC12-32.768KTR
Abracon
Abracon's E8WSDC12-32.768KTR crystal oscillator offers 20 ppm frequency tolerance, 144% stability, and 70000 ohm series resistance. Ideal for applications requiring precise timing at 0.032768 MHz, such as IoT devices and communication systems.
1-320551-1
TE Connectivity 1-320551-1 is a UL-approved FEMALE RING TERMINAL for 16 AWG wire with 300V rating. Ideal for applications requiring secure electrical connections in terminals & terminal blocks.
2-33457-2
RING TERMINAL; Wire Gauge: 10 AWG; Wire Cross Section: 6 mm2; Safety Approval: UL; Terminal Gender: FEMALE; No. of Ways: 1;
1824022
Phoenix Contact
BARRIER STRIP TERMINAL BLOCK;
1745894
The Phoenix Contact 1745894 is a Barrier Strip Terminal Block with 2 ways, rated for 8A current and 160V voltage. Featuring push-in fastening method, it accepts wire gauge up to 16 AWG (1.5 mm2). Ideal for applications requiring secure electrical connections in industrial settings.
MS25036-150
Panduit
RING TERMINAL; Additional Features: NYLON; Wire Gauge: 18 AWG; Voltage (Rated): 600 V; Wire Cross Section: 1.5 mm2; Safety Approval: CSA; UL;
1731734
Phoenix Contact 1731734 is a UL-approved barrier strip terminal block with 3 ways, rated for 24A current and 500V voltage. It accommodates wire gauge up to 12 AWG and wire cross-section of 2.5mm², mounted on board using screw fastening method. Ideal for industrial applications requiring secure electrical connections.
UT2,5
The Phoenix Contact UT2,5 is a DIN RAIL mounted modular terminal block with 2 ways and rated for 24A current at 1000V voltage. It supports wire gauge up to 12 AWG and wire cross section of 4 mm2, secured by screw fastening. Ideal for applications requiring CB, CSA, CUL, DNV, EAC, GL, LR safety approvals.
D-436-36CS2651
WIRE TERMINAL; Mounting Type: CABLE; Wire Gauge: 20 AWG; Wire Cross Section: .61 mm2; Safety Approval: UL;
173
Zierick Manufacturing
LUG TERMINAL;
36151
RING TERMINAL; Wire Gauge: 16 AWG; Voltage (Rated): 300 V; Safety Approval: UL; No. of Ways: 1; Wire Cross Section: 1.65 mm2;
4900
Keystone Electronics
TAB TERMINAL; Terminal Gender: MALE;
51863-2
TE Connectivity's 51863-2 is a UL-approved RING TERMINAL with a wire gauge of 22 AWG and rated voltage of 300 V. It is designed for use in terminals & terminal blocks, specifically for female connections with a wire cross section of 0.38 mm2.
8-321198-1
SPLICE TERMINAL; Wire Gauge: 22 AWG; Safety Approval: UL; Terminal Gender: FEMALE; Wire Cross Section: .4 mm2;
1-320551-3
TE Connectivity 1-320551-3 is a UL-approved FEMALE RING TERMINAL for 20 AWG wire with a rated voltage of 300V. It has a wire cross section of 0.6 mm2, making it ideal for various electrical applications requiring secure connections.
725964-2
PCB TERMINAL; Terminal Gender: MALE; Safety Approval: UL;
624
Tyco Electronics Amp
MODULAR TERMINAL BLOCK; Mounting Type: CABLE; Fastening Method: SCREW; Additional Features: POLYAMIDE; Wire Gauge: 8 AWG; Voltage (Rated): 300 V;
1725737
Phoenix Contact 1725737 is a modular terminal block with 10 ways, rated for 6A current and 160V voltage. It uses screw fastening method, supports wire gauge up to 20 AWG, and wire cross section of 0.5 mm2. Ideal for board mounting applications with CSA, CUL, EAC, UL safety approvals.
MS25036-153
Defense Logistics Agency
RING TERMINAL; Additional Features: NYLON; Wire Gauge: 14 AWG; Voltage (Rated): 300 V; Wire Cross Section: 2.08 mm2; Safety Approval: UL;
D-436-38-COLD
BUTT TERMINAL; Mounting Type: CABLE; Wire Gauge: 12 AWG; Safety Approval: UL; Wire Cross Section: 2.94 mm2;
MCV1,5/4-G-3,5
The Phoenix Contact MCV1,5/4-G-3,5 is a 4-way barrier strip terminal block with a rated voltage of 160V and current of 8A. It supports wire gauge up to 15 AWG and wire cross-section of 1.5mm2, making it ideal for board mounting applications requiring secure connections. Safety approvals include CB, CSA, CUL, EAC, UL, and VDE.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
MS25036-102
Amphenol Communications Solutions
RING TERMINAL; Additional Features: MATERIAL: COPPER; INSULATION: NYLON; Wire Gauge: 16 AWG; Voltage (Rated): 300 V; Wire Cross Section: 1.42 mm2; No. of Ways: 1;
RING TERMINAL; Additional Features: MATERIAL: COPPER; INSULATION: NYLON; Wire Gauge: 16 AWG; Voltage (Rated): 300 V; Safety Approval: UL; No. of Ways: 1;
MS-25036-102
Molex
RING TERMINAL; Additional Features: MATERIAL: COPPER; INSULATION: NYLON; Wire Gauge: 16 AWG; Voltage (Rated): 300 V; No. of Ways: 1; Wire Cross Section: 1.42 mm2;
RING TERMINAL; Additional Features: NYLON; Wire Gauge: 18 AWG; Voltage (Rated): 600 V; Safety Approval: CSA; UL; Wire Cross Section: 1.5 mm2;
MS25036-149
TE Connectivity's MS25036-149 is a CSA/UL approved FEMALE RING TERMINAL for 16 AWG wire with 300V rating. Ideal for applications requiring secure electrical connections in terminals & terminal blocks.
MS-25036-149
Molex MS-25036-149 is a CSA/UL approved RING TERMINAL for 16 AWG wire, rated at 300V. With a wire cross section of 1.31 mm2, it's ideal for female terminals in various electrical applications.
RING TERMINAL; Wire Gauge: 16 AWG; Voltage (Rated): 300 V; No. of Ways: 1; Safety Approval: CSA; UL; Terminal Gender: FEMALE;
RING TERMINAL; Wire Gauge: 16 AWG; Voltage (Rated): 300 V; Terminal Gender: FEMALE; No. of Ways: 1; Safety Approval: CSA; UL;
MS25036-101
RING TERMINAL; Wire Gauge: 16 AWG; Voltage (Rated): 300 V; Wire Cross Section: 1.42 mm2; Safety Approval: UL; No. of Ways: 1;
RING TERMINAL; Wire Gauge: 16 AWG; Voltage (Rated): 300 V; Wire Cross Section: 1.42 mm2; No. of Ways: 1; Safety Approval: UL;
MS-25036-101
RING TERMINAL; Wire Gauge: 16 AWG; Voltage (Rated): 300 V; No. of Ways: 1; Safety Approval: UL; Wire Cross Section: 1.42 mm2;
RING TERMINAL; Wire Gauge: 16 AWG; Voltage (Rated): 300 V; Safety Approval: UL; Wire Cross Section: 1.42 mm2; No. of Ways: 1;
MS25036-154
RING TERMINAL; Additional Features: NYLON; Wire Gauge: 14 AWG; Voltage (Rated): 300 V; Safety Approval: UL; Wire Cross Section: 2 mm2;
RING TERMINAL; Additional Features: NYLON; Wire Gauge: 14 AWG; Voltage (Rated): 300 V; No. of Ways: 1; Wire Cross Section: 2 mm2;
RING TERMINAL; Additional Features: NYLON; Wire Gauge: 14 AWG; Voltage (Rated): 300 V; Safety Approval: UL; No. of Ways: 1;
MS-25036-154
Abb Installation Products
RING TERMINAL; Additional Features: NYLON; Wire Gauge: 14 AWG; Voltage (Rated): 300 V; Wire Cross Section: 2 mm2; Safety Approval: UL;
RING TERMINAL; Additional Features: NYLON; Wire Gauge: 14 AWG; Voltage (Rated): 300 V; Wire Cross Section: 2 mm2; No. of Ways: 1;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved