Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
MODULAR TERMINAL BLOCK; Mounting Type: DIN RAIL; Wire Gauge: 4 AWG; Safety Approval: UL; Wire Cross Section: 16 mm2; No. of Ways: 1;
Median Price
$5.306
Lifecycle Status
Suppliers In-Stock
29
In-Stock Inventory
1k+
Arrow
1+ parts
$2.967
100+ parts
-
1k+ parts
10k+ parts
Boersig
$3.360
Chip1Stop
$4.210
Element14
RS (Exports)
$7.790
$5.610
Newark
$9.770
DigiKey
$10.070
$5.393
$4.544
TE Connectivity
$12.370
Adafruit Industries
$51.500
$48.925
TTI Europe
$5.094
$4.900
$4.621
Verical
Farnell
$7.330
Master Electronics
$4.147
$4.097
$4.076
TTI
$4.560
Galco
$3.760
Kempston Controls
$4.200
Nova Conductors
$4.477
TME
$6.190
$3.290
Vyrian
VNN
Electro Sonic
$4.250
$3.240
IBS Electronics
$5.847
$5.777
$5.747
Rapid Electronics
$6.251
NAC Semi
$10.090
$9.320
Bisco
ACDS - Activité Composants Distribution Service
Bristol Electronics
Dan-Mar Components
Quotebeam
Semicontronic
$2.330
$2.272
$2.260
Argo Parts USA
$4.135
Netroflash
$4.253
$4.164
Continental Prestige Electronics
$4.760
$3.910
$3.560
Allen Electronics Distributors
$9.110
Advanced Electronics
Neutron USA
$120.990
Perfect Parts
Abacus Technologies
GreenTree Electronics
Aztec Data Supply Inc.
Eastek
$5.415
Terminals & Terminal Blocks 1SNK510150R0000 attributes and parameters. Explore more Terminals & Terminal Blocks devices from Abb
Product Type:
Safety Compliance:
Wire Gauge:
Wire Cross Section:
Total Ways:
Total Decks:
Mounting Style:
1SNK510150R0000 Terminals & Terminal Blocks trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.90.40.00
SB
ABB is a technology leader in electrification and automation, enabling a more sustainable and resource-efficient future. The company’s solutions connect engineering know-how and software to optimize how things are manufactured, moved, powered and operated. Building on more than 130 years of excellence, ABB’s 105,000 employees are committed to driving innovations that accelerate industrial transformation.
LM358D-T
NXP Semiconductors
LM358D-T by NXP Semiconductors is a dual operational amplifier with 70dB CMRR, 1000kHz unity gain bandwidth, and 9000uV max input offset voltage. Widely used in commercial applications due to its small outline package and low bias current of 0.5uA.
PAP-06V-S
J S T Mfg
PAP-06V-S by J S T Mfg is a 6-contact BOARD CONNECTOR with 94V-0 UL Flammability Code. It has FEMALE contacts, CRIMP termination, and comes WITH CABLE ASSEMBLY for CABLE mounting applications.
M39029/56-351
Defense Logistics Agency
CONNECTOR ACCESSORY; MIL Conformity: YES; Contact Gender: FEMALE; Mating Contacts: M39029/58-363; Removal Tool Sources: MILITARY; Alternate Contact Sources: MILITARY;
ERJ6ENF10R0V
Panasonic
Panasonic ERJ6ENF10R0V is a 10 ohm fixed resistor with 1% tolerance, suitable for surface mount applications. With a rated power dissipation of 0.125W and operating voltage of 150V, it operates b/w -55°C to 155°C. Its metal glaze/thick film technology ensures stable performance in various electronic circuits.
2N2222A
Tesla Elektronicke Soucastky
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
1N4148WSF-7
Diodes Incorporated
1N4148WSF-7 by Diodes Inc. is a single silicon rectifier diode with max output current of 0.25A and max reverse voltage of 100V. It operates b/w -55 to 150°C, has a small outline package style, and is suitable for surface mount applications in various electronic circuits.
2N7002
Philips Semiconductors
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Moisture Sensitivity Level (MSL): 1; Maximum Operating Temperature: 150 Cel;
1N4148
Weitron Technology
RECTIFIER DIODE; Surface Mount: NO; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; Maximum Output Current: .15 A; Terminal Finish: Tin/Lead (Sn/Pb);
06035C104KAT2A
KYOCERA AVX
06035C104KAT2A by KYOCERA AVX is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.
M24308/2-1F
Air Electro
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; MIL Conformity: YES; Additional Features: STANDARD: MIL-DTL-24308;
BAV99
MIXER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WS
Rugao Dachang Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
STM32F103C8T6
STMicroelectronics
STM32F103C8T6 by STMicroelectronics is a 32-bit microcontroller with 48 terminals, operating at up to 16 MHz. It features 10-Ch 12-Bit ADC channels and 7 DMA channels, suitable for industrial applications requiring low power consumption and high-speed connectivity via CAN, I2C(2), SPI(2), USART(3), USB.
Good-ark Electronics
RECTIFIER DIODE; Surface Mount: NO; No. of Elements: 1; Maximum Non Repetitive Peak Forward Current: .5 A; Maximum Forward Voltage (VF): 1 V; No. of Phases: 1;
Continental Device India
OHN3140U
Tt Electronics Plc
OHN3140U by Tt Electronics Plc is a magnetic field sensor with a max supply voltage of 24V and hysteresis of 2mT. It features an output range of 25mA and operates b/w -20 to 85°C. Ideal for applications requiring precise detection and measurement of magnetic fields in various industries.
Teledyne Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; JESD-30 Code: R-PDSO-G3; Maximum Operating Temperature: 150 Cel; No. of Terminals: 3;
LM7805CT
Texas Instruments
LM7805CT by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1.5A. It operates b/w 0-125°C, has a dropout voltage of 2V, and offers excellent line/load regulation for various electronic applications.
LM107H
Intersil
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Nominal Common Mode Reject Ratio: 96 dB;
2-520405-2
TE Connectivity 2-520405-2 is a UL-approved PUSH-ON TERMINAL for 18 AWG wire, rated at 600V. With 0.82 mm2 wire cross section, it's ideal for FEMALE terminals in various applications like automotive and industrial electronics.
1787030
Phoenix Contact
Phoenix Contact 1787030 is a 2-row strip terminal block with 4 ways and rated voltage of 160V. It has CB, CUL, UL, VDE safety approvals and fastens via connector. Ideal for board and panel mounting, it supports up to 8A current making it suitable for various industrial applications.
1888690
The Phoenix Contact 1888690 is a modular terminal block with 4 ways, rated for 16A current and 250V voltage. It features a wire gauge of 14 AWG and wire cross section of 2.5 mm2, fastened by screws on the board. Ideal for industrial applications requiring UL/CSA safety approvals.
733-370
Wago
Wago 733-370 is a STRIP TERMINAL BLOCK with 10 ways, rated for 150V/4A. It uses CONNECTOR fastening method and has safety approvals from ABS, CCA, CSA, DNVGL, EN, IEC. Ideal for BOARD mounting applications in various industries.
31398-1
Tyco Electronics Amp
RING TERMINAL; Wire Gauge: 16 AWG; Wire Cross Section: 1.65 mm2; Terminal Gender: FEMALE;
8197
Keystone Electronics
POWER TERMINAL; Additional Features: BRASS;
281-603/281-400
MODULAR TERMINAL BLOCK;
M81824/12-2
WIRE TERMINAL; Mounting Type: CABLE; Wire Gauge: 16 AWG; Wire Cross Section: 7.54 mm2; Safety Approval: UL;
9-160463-2
PUSH-ON TERMINAL; Wire Gauge: 14 AWG; Voltage (Rated): 300 V; Wire Cross Section: 2.5 mm2; Safety Approval: UL; Terminal Gender: FEMALE;
1-962915-2
TAB TERMINAL; Wire Gauge: 17 AWG; Wire Cross Section: 1 mm2; Terminal Gender: MALE; Current (Rated): 30 A; Safety Approval: LV, UL;
1786840
Phoenix Contact 1786840 is a 2-row barrier strip terminal block with 6 ways. Rated for 160V voltage and 8A current, it has CB, CUL, UL, VDE safety approvals. Ideal for board mounting applications using connector fastening method.
M81824/1-2
Tri-star Electronics International
WIRE TERMINAL; Wire Gauge: 16 AWG; Manufacturer Series: M81824/1;
1SNK506410R0000
Abb
MODULAR TERMINAL BLOCK; Mounting Type: DIN RAIL; Wire Gauge: 10 AWG; Voltage (Rated): 150 V; No. of Decks: 1; Wire Cross Section: 4 mm2;
221-412
The Wago 221-412 is a barrier strip terminal block with 2 ways, rated for 32A current and 450V voltage. It supports wire gauge up to 12 AWG and wire cross section of 4mm2. Ideal for applications requiring secure connections in industrial settings.
DRA1-MP240D3
Sensata Technologies
MODULAR TERMINAL BLOCK; Mounting Type: DIN RAIL; Fastening Method: SCREW; Voltage (Rated): 280 V; Current (Rated): 3 A; No. of Decks: 1;
2-33466-3
RING TERMINAL; Wire Gauge: 6 AWG; No. of Ways: 1; Wire Cross Section: 15 mm2; Safety Approval: UL; Terminal Gender: FEMALE;
Crydom
The Crydom DRA1-MP240D3 is a DIN RAIL mounted MODULAR TERMINAL BLOCK with CE, CSA, UL, VDE safety approvals. It has a rated voltage of 280V and current of 3A, fastened by SCREW method. Ideal for industrial applications requiring secure electrical connections.
MINIMCR-2-UI-UI
MS25036-154
RING TERMINAL; Additional Features: NYLON; Wire Gauge: 14 AWG; Voltage (Rated): 300 V; Safety Approval: UL; No. of Ways: 1;
3-282836-2
TE Connectivity 3-282836-2 is a modular terminal block with 4 ways, rated for 300V voltage and 13.5A current. It uses solder fastening method and supports wire gauge up to 16 AWG. Ideal for board mounting applications with UL safety approval.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
1SNK710151R0000
MODULAR TERMINAL BLOCK; Mounting Type: DIN RAIL; Wire Gauge: 6 AWG; Wire Cross Section: 10 mm2; No. of Decks: 1; Safety Approval: UL;
MODULAR TERMINAL BLOCK; Mounting Type: DIN RAIL; Wire Gauge: 6 AWG; Wire Cross Section: 10 mm2; Safety Approval: UL; No. of Decks: 1;
1SNK712064R0000
TE Connectivity's 1SNK712064R0000 is a DIN RAIL mounted MODULAR TERMINAL BLOCK with UL safety approval. Featuring 4 AWG wire gauge, 16 mm2 wire cross section, and 1000 V rated voltage, it can handle up to 75 A current across its 3 ways. Ideal for industrial applications requiring secure electrical connections.
1SNK506212R0000
MODULAR TERMINAL BLOCK; Mounting Type: DIN RAIL; Wire Gauge: 10 AWG; Voltage (Rated): 300 V; No. of Decks: 2; Wire Cross Section: 6 mm2;
TE Connectivity's 1SNK506212R0000 is a DIN RAIL mounted MODULAR TERMINAL BLOCK with UL safety approval. It supports wire gauge up to 10 AWG, voltage rating of 300V, and current rating of 30A. Ideal for applications requiring a compact terminal block solution with 2 ways and 2 decks.
1SNK706410R0000
MODULAR TERMINAL BLOCK; Mounting Type: DIN RAIL; Wire Gauge: 12 AWG; Voltage (Rated): 300 V; Wire Cross Section: 2.5 mm2; No. of Decks: 1;
MODULAR TERMINAL BLOCK; Mounting Type: DIN RAIL; Wire Gauge: 12 AWG; Voltage (Rated): 300 V; Current (Rated): 16 A; No. of Ways: 1;
1SNK705010R0000
TE Connectivity's 1SNK705010R0000 is a DIN RAIL modular terminal block with UL safety approval. Rated for 600V voltage, it supports 12 AWG wire gauge and 2.5mm2 wire cross section, handling up to 20A current. Ideal for industrial applications requiring secure electrical connections on DIN rails.
MODULAR TERMINAL BLOCK; Mounting Type: DIN RAIL; Wire Gauge: 12 AWG; Voltage (Rated): 600 V; Current (Rated): 20 A; No. of Ways: 1;
1SNK505060R0000
MODULAR TERMINAL BLOCK; Mounting Type: DIN RAIL; Wire Gauge: 12 AWG; Voltage (Rated): 600 V; Current (Rated): 20 A; Wire Cross Section: 4 mm2;
TE Connectivity's 1SNK505060R0000 is a DIN RAIL mounted MODULAR TERMINAL BLOCK with UL safety approval. It supports wire gauge up to 12 AWG and rated voltage of 600 V, suitable for applications requiring 20 A current and wire cross section of 4 mm2.
1SNK705062R0000
MODULAR TERMINAL BLOCK; Mounting Type: DIN RAIL; Wire Gauge: 12 AWG; Voltage (Rated): 600 V; Safety Approval: UL; Wire Cross Section: 2.5 mm2;
TE Connectivity's 1SNK705062R0000 is a DIN RAIL mounted MODULAR TERMINAL BLOCK with UL safety approval. It supports wire gauge up to 12 AWG and rated voltage of 600V, suitable for applications requiring 20A current with wire cross section of 2.5 mm2.
1SNK705065R0000
MODULAR TERMINAL BLOCK; Mounting Type: DIN RAIL; Wire Gauge: 12 AWG; Voltage (Rated): 600 V; Safety Approval: UL; Current (Rated): 20 A;
MODULAR TERMINAL BLOCK; Mounting Type: DIN RAIL; Wire Gauge: 12 AWG; Voltage (Rated): 600 V; Wire Cross Section: 2.5 mm2; Safety Approval: UL;
1SNK510150R0000
TE Connectivity's 1SNK510150R0000 is a DIN RAIL mounted modular terminal block with UL safety approval. It supports wire gauge up to 4 AWG and wire cross section of 16 mm2. Ideal for various applications requiring a single way connection.
1SNK505313R0000
TE Connectivity's 1SNK505313R0000 is a DIN RAIL mounted MODULAR TERMINAL BLOCK with UL safety approval. It supports wire gauge up to 10 AWG, voltage rating of 150V, and current rating of 18A. Ideal for applications requiring secure electrical connections in industrial settings.
MODULAR TERMINAL BLOCK; Mounting Type: DIN RAIL; Wire Gauge: 10 AWG; Voltage (Rated): 150 V; No. of Decks: 1; Wire Cross Section: 2.5 mm2;
1SNK510030R0000
MODULAR TERMINAL BLOCK; Mounting Type: DIN RAIL; Wire Gauge: 4 AWG; Voltage (Rated): 600 V; Current (Rated): 67 A; No. of Decks: 1;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved